Next Article in Journal
An Active Voltage Coordinate Control Strategy of DFIG-Based Wind Farm with Hybrid Energy Storage System
Next Article in Special Issue
Overview of Machine Learning Methods for Lithium-Ion Battery Remaining Useful Lifetime Prediction
Previous Article in Journal
Phase Role in the Non-Uniformity of Main-Line Couplings in Asymmetric Extracted-Pole Inline Filters
Previous Article in Special Issue
Technoeconomic and Environmental Study of Multi-Objective Integration of PV/Wind-Based DGs Considering Uncertainty of System
 
 
Article
Peer-Review Record

Low Switching Frequency Operation Control of Line Voltage Cascade Triple Converter

Electronics 2021, 10(24), 3059; https://doi.org/10.3390/electronics10243059
by Zhiqiang Wang *, Sheng Hao, Dongyang Han, Xuefeng Jin and Xin Gu
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Electronics 2021, 10(24), 3059; https://doi.org/10.3390/electronics10243059
Submission received: 5 November 2021 / Revised: 29 November 2021 / Accepted: 30 November 2021 / Published: 8 December 2021
(This article belongs to the Special Issue 10th Anniversary of Electronics: Recent Advances in Power Electronics)

Round 1

Reviewer 1 Report

The paper involves an interesting topic. The description of the state of the art, the proposed method and the result are sufficient. In my opinion, the paper is ready for the publication.

Author Response

Thank you very much for your suggestion.

Reviewer 2 Report

Why that DC bus is set at 100 V DC? Or to 60 and 170 V DC, on line 399?

Why other DC values were not carried out?

Which are the maximum active/reactive powers vehiculated?

What other DC loads could be used?

Does the PWM response depend on the load (type/value of load)?

Whic command devices were used?

Which are the limitations of the priciple?

 

 

 

Author Response

Thank you very much for your suggestion. The revised content has been highlighted in yellow in the revsion. We answered each question in the response letter. 

Author Response File: Author Response.pdf

Reviewer 3 Report

The propose converter is interesting. However, there are some concerns that should be addressed:

1) Item 3 is a little confuse and should be better explained.

2) Please add a detailed design example for converter.

3) The efficiency curve of the whole system must be present.

4) The references are not complete.

Author Response

Thank you very much for your suggestion. The revised content has been highlighted in yellow in the revision. And we answerd each question in the response letter.

Author Response File: Author Response.pdf

Back to TopTop