Reviewer Board
Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Department of Engineering and Materials Science and Transport, University of Seville (US), Seville, Spain
Interests: TEM; stem; eels; EDX; structural and chemical nanocharacterization of different materials (i.e.: catalysts; biomaterials...)
Interests: TEM; stem; eels; EDX; structural and chemical nanocharacterization of different materials (i.e.: catalysts; biomaterials...)
Faculty of Metallurgy, University of Zagreb, Aleja Narodnih Heroja 3, 44000 Sisak, Croatia
Interests: titanium alloys; metallic biomedical materials; casting; powder metallurgy; microstructure
Interests: titanium alloys; metallic biomedical materials; casting; powder metallurgy; microstructure
Department of Civil Engineering and Architecture, University of Beira Interior, 6200-358 Covilhã, Portugal
Interests: structural analysis and design; numerical modelling; concrete structures; structural materials
Interests: structural analysis and design; numerical modelling; concrete structures; structural materials
Materials Science Department, Faculty of Engineering, University of Mons, Mons, Belgium
Interests: corrosion
Interests: corrosion
Department of the Transport Systems, Don State Technical University, Rostov Oblast 344002, Russia
Interests: modeling; mechanical properties; reliability; strength; numerical simulation; indentation; impact; non-destructive tests; dynamic tests
Interests: modeling; mechanical properties; reliability; strength; numerical simulation; indentation; impact; non-destructive tests; dynamic tests
Paediatric Dentistry, Faculty of Dentistry, The University of Hong Kong, Hong Kong
Interests: caries preventive strategies; paediatric oral health
Interests: caries preventive strategies; paediatric oral health
Department of Construction, University of Antwerp, Prinsstraat 13, 2000 Antwerpen, Belgium
Interests: bitumen; AFM; CLSM; geopolymers; soil mechanics; micro structures
Interests: bitumen; AFM; CLSM; geopolymers; soil mechanics; micro structures
Department of Medicine and Surgery, Section of Orthodontics, University of Insubria, Varese, Italy
Interests: oral surgery; digital dentistry; 3D printing; orthodontics; dentistry; prosthesis
Interests: oral surgery; digital dentistry; 3D printing; orthodontics; dentistry; prosthesis
Department of Functional Electroceramics, University of Silesia in Katowice, Katowice, Poland
Interests: multiferroics; ferroics; material engineering; biferroics; ferroelectric materials with a perovskite type structure; ferroelectromagnetic ceramic materials and ceramic composites; functional materials in applications in microelectronics and micromechatronics; multicomponent ceramic materials and multicomponent solid solutions
Interests: multiferroics; ferroics; material engineering; biferroics; ferroelectric materials with a perovskite type structure; ferroelectromagnetic ceramic materials and ceramic composites; functional materials in applications in microelectronics and micromechatronics; multicomponent ceramic materials and multicomponent solid solutions
Department of Mechanics and Machine Design, Faculty of Mechanical Engineering, Opole University of Technology, Opole, Poland
Interests: fatigue; lightweight materials; damage mechanics; spectral methods; frequency domain methods; variable amplitude loading; failure mechanics; vibration effects
Interests: fatigue; lightweight materials; damage mechanics; spectral methods; frequency domain methods; variable amplitude loading; failure mechanics; vibration effects
Faculty of Natural Sciences and Engineering, University of Ljubljana, Askerceva 12, 1000 Ljubljana, Slovenia
Interests: recrystallization; steel; hydrogen embrittlement; alloy design; hot deformation
Interests: recrystallization; steel; hydrogen embrittlement; alloy design; hot deformation
Mechanics, Sound, & Vibration Laboratory, Department of Civil Engineering, College of Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei 10617, Taiwan
Interests: optical fiber; bridge; inverse problem; frequency; finite element model; elastic modulus; bending test; nondestructive test; vertical deflection; prestressed concrete beam; steel beam; “compression–softening” theory; prestress loss; second–order theory; space truss
Interests: optical fiber; bridge; inverse problem; frequency; finite element model; elastic modulus; bending test; nondestructive test; vertical deflection; prestressed concrete beam; steel beam; “compression–softening” theory; prestress loss; second–order theory; space truss
Engineering Faculty, Department of Industrial Machines and Equipment, Metal Forrming Research Centre, Lucian Blaga University of Sibiu, Sibiu, Romania
Interests: CNC machine-tools; industrial robots; manufacturing systems; CAD/CAM/CAE; incremental forming
Interests: CNC machine-tools; industrial robots; manufacturing systems; CAD/CAM/CAE; incremental forming
School of Geography, Earth and Environmental Sciences, University of Birmingham, Edgbaston, Birmingham B15 2TT, UK
Interests: nanomaterial synthesis; nanosafety; functionalisation and characterisation; nanomaterial behaviour; transformations and ageing
Interests: nanomaterial synthesis; nanosafety; functionalisation and characterisation; nanomaterial behaviour; transformations and ageing
Institute of Textile Engineering and Polymer Materials, University of Bielsko-Biala, Bielsko-Biala, Poland
Interests: polymer crystallization; textiles; fibres; polymer structure; polypropylene; wool
Interests: polymer crystallization; textiles; fibres; polymer structure; polypropylene; wool
Faculty of Civil Enginering, VSB - Technical University of Ostrava, Brno, Czech Republic
Interests: material modelling; finite element method; concrete; masonry; long-term behaviour of building materials; in-situ testing
Interests: material modelling; finite element method; concrete; masonry; long-term behaviour of building materials; in-situ testing
Faculty of Civil Engineering and Architecture, Lublin University of Technology, Lublin, Poland
Interests: composites; concrete; cement; building physics; building materials; mortar; thermal insulation; gypsum; lime; physical and mechanical properties; plaster; hemp-lime composites; ecological materials; thermal and moisture properties
Interests: composites; concrete; cement; building physics; building materials; mortar; thermal insulation; gypsum; lime; physical and mechanical properties; plaster; hemp-lime composites; ecological materials; thermal and moisture properties
Department of Mechanical Engineering, Barcelona School of Engineering (ETSEIB), Universitat Politècnica de Catalunya, Avda. Diagonal 647, 08028 Barcelona, Spain
Interests: roughness; fused deposition modeling; honing; milling
Interests: roughness; fused deposition modeling; honing; milling
Department of Environmental Engineering and Management, Gheorghe Asachi Technical University of Iaşi, Iaşi, Romania
Interests: waste recycling; wastewater treatment; environmental pollution; environmental bioremediation; biosorption/adsorption; heavy metals pollutants; batch and continuous systems; low-cost biosorbents/adsorbents; valorization of exhausted biosorbents/adsorbents; ecological fertilizers for soils
Interests: waste recycling; wastewater treatment; environmental pollution; environmental bioremediation; biosorption/adsorption; heavy metals pollutants; batch and continuous systems; low-cost biosorbents/adsorbents; valorization of exhausted biosorbents/adsorbents; ecological fertilizers for soils
National Institute for Research and Development of Isotopic and Molecular Technologies, 400293 Cluj-Napoca, Romania
Interests: synthetic organic chemistry; enantioselective catalysis; reaction mechanisms; magnetic nanostructures; synthesis of nanoparticles; hydroperoxides; polyol process; nanoparticle self assembly (to microspheres); polymers and hydrogels based on renewable mate
Interests: synthetic organic chemistry; enantioselective catalysis; reaction mechanisms; magnetic nanostructures; synthesis of nanoparticles; hydroperoxides; polyol process; nanoparticle self assembly (to microspheres); polymers and hydrogels based on renewable mate
Institute of Metals and Technology IMT, Ljubljana, Slovenia
Interests: steel; metals and alloys; metallurgy; stainless steels; steelmaking; non-metallic inclusions; carbon steel; tool steel; steelmaking slag; automotive steels; special steel grades; high strenght steels; steel heat treatment; steel microstructural characteri
Interests: steel; metals and alloys; metallurgy; stainless steels; steelmaking; non-metallic inclusions; carbon steel; tool steel; steelmaking slag; automotive steels; special steel grades; high strenght steels; steel heat treatment; steel microstructural characteri
School of Engineering and the Built Environment, Anglia Ruskin University, Bishop Hall Lane, Chelmsford CM1 1SQ, UK
Interests: additive manufacturing; 3D printing; rapid prototyping; Industry 4.0; product design and development; composite/hybrid products; manufacturing process design
Interests: additive manufacturing; 3D printing; rapid prototyping; Industry 4.0; product design and development; composite/hybrid products; manufacturing process design
FAMU-FSU College of Engineering
Interests: nanomechanics; nanofiber; graphitic material; electrospinning
Interests: nanomechanics; nanofiber; graphitic material; electrospinning
E.T.S. de Ingenieros Industriales de Ciudad Real, Universidad de Castilla-La Mancha, Edificio Politécnico. Avda. Camilo José Cela s/n Campus Universitario, 13071 Ciudad Real, Spain
Interests: composite materials; computational mechanics; finite element method; additive manufacturing; digital image correlation; ultrasonic testing; damage analysis; carbon-fibre-reinforced epoxy laminates; non-linear behaviour
Interests: composite materials; computational mechanics; finite element method; additive manufacturing; digital image correlation; ultrasonic testing; damage analysis; carbon-fibre-reinforced epoxy laminates; non-linear behaviour
Department of Chemistry & Biochemistry, University of Alabama, Tuscaloosa, AL 35401, USA
Interests: organic solar cells; conjugated materials; main-group chemistry; organoboron chemistry; sustainable polymer
Interests: organic solar cells; conjugated materials; main-group chemistry; organoboron chemistry; sustainable polymer
Superior Technical Institute, University of Lisbon, Lisbon, Portugal
Interests: gold; carbon; oxides; catalysis; nanoparticles; oxidation; heterogenisation; metal complexes
Interests: gold; carbon; oxides; catalysis; nanoparticles; oxidation; heterogenisation; metal complexes
Centre for Polymer and Material Technologies CPMT, Department of Materials, Textiles and Chemical Engineering MaTCh, Ghent University, Ghent, Belgium
Interests: sustainability; additive manufacturing; SLS; 3D Printing; reprocessing; polymer technology; polymer engineering; FFF; polymer processing, characterization and (3D) processing of polymers and composites; mould making
Interests: sustainability; additive manufacturing; SLS; 3D Printing; reprocessing; polymer technology; polymer engineering; FFF; polymer processing, characterization and (3D) processing of polymers and composites; mould making
Faculty of Mechanical Engineering, Transilvania University of Brasov, Bulevardul Eroilor 29, 500036 Brașov, Romania
Interests: computational mechanics; dynamics of structures; finite element analysis; mechanical testing; applied mechanics; mechanics of composite materials; elasticity and plasticity of the isotropic and anisotropic materials; environmental effects (moisture, temperature, thermal cycles etc.) on composites; analysis of the stresses and strains
Interests: computational mechanics; dynamics of structures; finite element analysis; mechanical testing; applied mechanics; mechanics of composite materials; elasticity and plasticity of the isotropic and anisotropic materials; environmental effects (moisture, temperature, thermal cycles etc.) on composites; analysis of the stresses and strains
Intel Corporation, 5000 W Chandler Blvd, Chandler, AZ 85226, USA
Interests: phonons; material characterization; thermal transport; heat transfer; defects; Raman spectroscopy; X-ray diffraction (XRD); optical ellipsometry; thermoreflectance; lasers; nanoscale heat transfer; irradiation; nuclear engineering
Interests: phonons; material characterization; thermal transport; heat transfer; defects; Raman spectroscopy; X-ray diffraction (XRD); optical ellipsometry; thermoreflectance; lasers; nanoscale heat transfer; irradiation; nuclear engineering
Department of Earth and Space Sciences, Southern University of Science and Technology, No. 1088 Xueyuan Road, Xili, Nanshan District, Shenzhen 518055, China
Interests: gnss geodesy; earthquake source Imaging; earthquake/tsunami early warning
Interests: gnss geodesy; earthquake source Imaging; earthquake/tsunami early warning
