Correction: Li, P. et al. Mechanical Characteristics, In Vitro Degradation, Cytotoxicity, and Antibacterial Evaluation of Zn-4.0Ag Alloy as a Biodegradable Material. Int. J. Mol. Sci. 2018, 19, 755

Li, Ping; Schille, Christine; Schweizer, Ernst; Rupp, Frank; Heiss, Alexander; Legner, Claudia; Klotz, Ulrich E.; Geis-Gerstorfer, Jürgen; Scheideler, Lutz

doi:10.3390/ijms21062258

Open AccessCorrection

Correction: Li, P. et al. Mechanical Characteristics, In Vitro Degradation, Cytotoxicity, and Antibacterial Evaluation of Zn-4.0Ag Alloy as a Biodegradable Material. Int. J. Mol. Sci. 2018, 19, 755

by

Ping Li

¹,

Christine Schille

¹,

Ernst Schweizer

¹,

Frank Rupp

¹,

Alexander Heiss

²,

Claudia Legner

²,

Ulrich E. Klotz

²,

Jürgen Geis-Gerstorfer

¹ and

Lutz Scheideler

^1,*

¹

Section Medical Materials Science and Technology, University Hospital Tübingen, Osianderstrasse 2–8, 72076 Tübingen, Germany

²

Research Institute for Precious Metals and Metals Chemistry (fem), Katharinenstrasse 17, 73525 Schwäbisch Gmünd, Germany

^*

Author to whom correspondence should be addressed.

Int. J. Mol. Sci. 2020, 21(6), 2258; https://doi.org/10.3390/ijms21062258

Submission received: 18 March 2020 / Accepted: 19 March 2020 / Published: 24 March 2020

(This article belongs to the Special Issue Current Trends in Metallic Biomaterials: From Additive Manufacturing to Bio-functilozation, Infection-Prevention, and Beyond)

Download Versions Notes

The authors wish to make the following corrections to this paper [1]:

The authors have found one inadvertent error in our abstract [1]. In this abstract, “The corrosion rate of Zn-4Ag calculated from released Zn ions in DMEM extracts is approximately 0.75 ± 0.16 μg cm⁻² day⁻¹” should be “approximately 10.75 ± 0.16 μg cm⁻² day⁻¹”.

The authors would like to apologize for any inconvenience caused to the readers by this change.

Reference

Li, P.; Schille, C.; Schweizer, E.; Rupp, F.; Heiss, A.; Legner, C.; Klotz, U.E.; Geis-Gerstorfer, J.; Scheideler, L. Mechanical characteristics, in vitro degradation, cytotoxicity, and antibacterial evaluation of Zn-4.0 Ag alloy as a biodegradable material. Int. J. Mol. Sci. 2018, 19, 755. [Google Scholar] [CrossRef] [Green Version]

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Share and Cite

MDPI and ACS Style

Li, P.; Schille, C.; Schweizer, E.; Rupp, F.; Heiss, A.; Legner, C.; Klotz, U.E.; Geis-Gerstorfer, J.; Scheideler, L. Correction: Li, P. et al. Mechanical Characteristics, In Vitro Degradation, Cytotoxicity, and Antibacterial Evaluation of Zn-4.0Ag Alloy as a Biodegradable Material. Int. J. Mol. Sci. 2018, 19, 755. Int. J. Mol. Sci. 2020, 21, 2258. https://doi.org/10.3390/ijms21062258

AMA Style

Li P, Schille C, Schweizer E, Rupp F, Heiss A, Legner C, Klotz UE, Geis-Gerstorfer J, Scheideler L. Correction: Li, P. et al. Mechanical Characteristics, In Vitro Degradation, Cytotoxicity, and Antibacterial Evaluation of Zn-4.0Ag Alloy as a Biodegradable Material. Int. J. Mol. Sci. 2018, 19, 755. International Journal of Molecular Sciences. 2020; 21(6):2258. https://doi.org/10.3390/ijms21062258

Chicago/Turabian Style

Li, Ping, Christine Schille, Ernst Schweizer, Frank Rupp, Alexander Heiss, Claudia Legner, Ulrich E. Klotz, Jürgen Geis-Gerstorfer, and Lutz Scheideler. 2020. "Correction: Li, P. et al. Mechanical Characteristics, In Vitro Degradation, Cytotoxicity, and Antibacterial Evaluation of Zn-4.0Ag Alloy as a Biodegradable Material. Int. J. Mol. Sci. 2018, 19, 755" International Journal of Molecular Sciences 21, no. 6: 2258. https://doi.org/10.3390/ijms21062258

APA Style

Li, P., Schille, C., Schweizer, E., Rupp, F., Heiss, A., Legner, C., Klotz, U. E., Geis-Gerstorfer, J., & Scheideler, L. (2020). Correction: Li, P. et al. Mechanical Characteristics, In Vitro Degradation, Cytotoxicity, and Antibacterial Evaluation of Zn-4.0Ag Alloy as a Biodegradable Material. Int. J. Mol. Sci. 2018, 19, 755. International Journal of Molecular Sciences, 21(6), 2258. https://doi.org/10.3390/ijms21062258

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Menu

Correction: Li, P. et al. Mechanical Characteristics, In Vitro Degradation, Cytotoxicity, and Antibacterial Evaluation of Zn-4.0Ag Alloy as a Biodegradable Material. Int. J. Mol. Sci. 2018, 19, 755

Reference

Share and Cite

Article Metrics

Article Access Statistics

Further Information

Guidelines

MDPI Initiatives

Follow MDPI