Skip to Content
MDPIMDPI
SensorsSensors
PDF
  • Erratum
  • Open Access

14 May 2016

Erratum: Sutapun, B. et al. Development and Beam-Shape Analysis of an Integrated Fiber-Optic Confocal Probe for High-Precision Central Thickness Measurement of Small-Radius Lenses. Sensors, 2015, 15, 8512-8526

,
,
and
1
School of Electronic Engineering, Institute of Engineering, Suranaree University of Technology, 111 University Ave., Muang, Nakhon Ratchasima 30000, Thailand
2
Photonics Technology Laboratory, National Electronics and Computer Technology Center (NECTEC), National Science and Technology Development Agency (NSTDA), 112 Thailand Science Park, Pahol Yothin Rd., Klong Luang, Pathumthani 12120, Thailand
*
Author to whom correspondence should be addressed.
Sensors2016, 16(5), 698;https://doi.org/10.3390/s16050698
Version Notes
Order Reprints
The source of the funding of this work disclosed on the published paper [1] was incorrect. The authors would like to correct the acknowledgements of this article as follows:
Acknowledgments: This work was funded by Suranaree University of Technology’s research and development fund.
The authors would like to apologize for any inconvenience this may have caused to the readers.

References

  1. Sutapun, B.; Somboonkaew, A.; Amarit, R.; Chanhorm, S. Development and beam-shape analysis of an integrated fiber-optic confocal probe for high-precision central thickness measurement of small-radius lenses. Sensors 2015, 15, 8512–8526. [Google Scholar] [CrossRef] [PubMed]

Article Metrics

Citations

Article Access Statistics

Journal Statistics
Multiple requests from the same IP address are counted as one view.
Measurement of Moisture in Wood for Application in the Restoration of Old Buildings
Previous
Influences of Probe’s Morphology for Metal Ion Detection Based on Light-Addressable Potentiometric Sensors
Next