1. Introduction
According to the Intergovernmental Panel on Climate Change 2018 report [
1], carbon dioxide (
) emissions are responsible along with other greenhouse gasses for global warming and keeping global warming
C above pre-industrial levels ‘requires limiting the total cumulative global anthropogenic emissions of
since the pre-industrial period’ [
1] (p. 14). The European policy for reducing the effect of climate change currently targets
emissions reduction. The European Union [
2] plans to achieve an 80% reduction in greenhouse gas emissions by 2050 (compared with 1990 levels). According to Muntean et al. [
3],
emissions from the European Union (EU28) increased by 1.1% in 2017 compared with 2016. Although EU28 emissions reached 3.5 Gt
in 2017, the EU28 share of global fossil
emissions has remained constant since 2015 at 9.6%, equivalent to 7 tonnes
/cap/year. With 10.2% fossil
emissions in 2017, Italy was among the largest contributors to total EU28 emissions. According to the 2018 EU Report, energy use in buildings is the second main source of
emissions in Europe after transport. The 2017 Italian
emissions caused by energy use in domestic buildings are nearly stable (−4%) compared with the 1990 level, and are 19% lower compared with the 2005 level.
The importance of
as a greenhouse gas is further emphasised by UK National Statistics [
4]:
accounts for 81% of total UK greenhouse gas emissions. In 2017, the UK residential sector accounted for 17% of all UK
emissions and the main source of emissions from this sector was the use of natural gas for heating and cooking.
According to the Enea 2017 annual report on energy efficiency [
5] for Italy, ‘in 2015, residential energy consumption was equal to 32.5 Mtoe with an increase by 10.0% relative to 2014. Natural gas is the main energy source: it covers more than 50% of sectorial energy consumption, followed by wood (19.5%) and electricity (17.5%)’. Considering domestic energy uses, heating is one of the major sources of energy consumption and one of the main contributors to
emissions. Therefore, energy savings could be a win-win strategy for the domestic energy sector in reducing both the household expenses as well as the environmental effect. Households could be incentivized to exchange their current heating system with one that has better energy efficiency and that will, therefore, reduce the annual heating costs.
There is an increasing awareness among citizens about the positive environmental effects of energy saving [
6]; however, the effect of the recession has considerably influenced the choice and use of heating sources. On the one hand, households struggle to reduce energy consumption and costs demanding alternative heating, and on the other hand, they consider alternatives that are not always sustainable (e.g., room air-conditioners) [
7].
Through their choices and preferences, households could play a significant role in affecting environmental quality when they choose their residential heating systems. For example, according to Hong and Howarth [
8], ‘replacing any of the water heaters considered in this study with a heat pump water heater will give net climatic benefits over all time frames (up to 100 years)’, even if the electricity consumed by heat pumps is generated with carbon sources. Consequently, identifying and understanding the factors that determine the choice of a new heating system by households could be very important in the design of environmentally sustainable and climate mitigation policies. These will help governments design future policies focused on creating the right incentives for households in supporting the adoption of less-polluting energy sources and heating system technologies and increasing the implementation of energy efficiency measures. Policies that encourage such behaviour are even more important if we consider that a house-heating system is a long term investment undertaken usually only every 10 or 15 years. Providing incentives to move towards more environment-friendly heating systems is therefore a great opportunity that, if neglected, would postpone the reduction of the environmental effects of the domestic sector for several years.
In Italy, such policies have so far relied mainly on financial incentives in the form of a subsidy covering 65% of the purchase cost, with a repayment timeframe of 10 years. It is therefore important to understand whether a protraction of institutional financial incentives to increase the number of renewable energy heating systems is still effective according to the public opinion.
Stated preference methods [
9,
10,
11] are a suitable choice for analysing consumers’ preferences especially when dealing with an ex-ante valuation, given that they allow the building of a hypothetical market that includes some product characteristics not yet available in the real market. The literature includes several applications of such methodologies in different fields, including renewable energy and environmental policies. Several studies analyse awareness [
12,
13] and estimate citizens’ willingness to pay (WTP) for the use of renewable energy sources (e.g., [
14,
15,
16,
17,
18,
19,
20]). A number of studies also investigate homeowners’ preferences for renewable domestic heating systems using the discrete choice experiment (DCE) approach [
21,
22,
23,
24,
25,
26,
27,
28,
29,
30,
31,
32,
33,
34,
35] or conjoint and variance analysis [
36], and most of them suggest that whilst renewable energy adoption is notably valued by households, this value is not enough to counterbalance the importance of the economic factors while purchasing a new heating [
24,
25,
27,
29]. In addition, Curtis et al. [
37] state that knowledge of fuel costs or associated emissions, or engagement in environmentally sustainable behaviours do not appear to explain the choice of heating system. A number of studies focus on the estimation of Italian households’ WTP for reducing emissions of energy production systems. For example, Bollino [
38], Strazzera et al. [
39] and Strazzera et al. [
40] perform Contingent Valuation studies to assess the potential trade-off between external costs and the cost of energy for households. Their results show that households are keen to buy renewable energy, and are willing to pay more for it. Similar results are obtained by Bigerna and Polinori [
41], who state that there is a noticeable WTP among Italian households for increasing Italian green energy production. Cicia et al. [
15] use a DCE to point out that Italian consumers are very inclined towards solar and wind energy. Moreover, Vecchiato and Tempesta [
19] show that respondents are willing to pay for electricity contracts including renewable energies, whereas Caporale and De Lucia [
42] find the existence of a positive consumer attitude towards renewable energy sources (wind power) in the Apulia Region. Vecchiato [
43] adopts a DCE and finds a positive WTP for wind energy.
Nevertheless, to the best of our knowledge no studies have investigated Italian households’ preferences for reducing emissions from their domestic heating systems adopting a DCE.
The objective of this study is to understand:
the importance given by customers to the environmental impact—in terms of emissions—when purchasing a new heating system;
the effect on consumer choices of a public subsidy linked to the heating system performance in terms of emissions.
The second objective will be studied using the DCE results to simulate the role of a public incentive in leading consumers to choose the most energy-efficient and ‘climate-friendly’ heating system.
The rest of the paper is organized as follows. In
Section 2 we describe the materials and the methodology used in the study and present the survey design and implementation.
Section 3.1 describes the socio-economic characteristics of the sample, whereas
Section 3.2 analyses respondents’ opinions on energy sources.
Section 3.3 presents the DCE results and their policy implications followed by the discussion and conclusions in
Section 4.
3. Results
3.1. Socio-Economic Characteristics of Respondents
Eight hundred and eighteen respondents completed the questionnaire. Respondents were, on average, 37.4 years old and 53% were men. The level of education was good, in fact 77% of respondents were relatively highly educated. Almost 42% were employees. The majority (59%) lived in a household with three to four members. Ninety-four percent declared that they were environmental association members.
Table 2 presents the interviewees’ and population descriptive statistics.
3.2. Respondents’ General Opinions on Energy Sources
The respondents were asked to specify their level of agreement or disagreement on an ‘agree-disagree’ Likert scale for a number of statements. The range of the Likert scale should capture the intensity of their feelings for a given item. In our survey, we used a uniform five-point Likert scale ranging from 1 (disagreement) to 5 (agreement). According to scholars who over the years have argued that the median and the mode should be used as the measure of central tendency for Likert scale data, we calculate both. However, the mode could probably be considered the most suitable for easy interpretation [
63].
The mode value of importance of preferences among different energy sources assessed among individuals in this sample was 5 for wind, solar, and geothermal energy, whereas the median score was 5 for solar energy only (
Table 3).
We asked respondents if their choices were influenced when choosing a specific energy source by its environmental effect, the presence of subsidies, and the low cost of the energy source. The importance of energy sources producing low environmental effects was considered as a key aspect by respondents (mean score = 4.28). Similarly, the presence of a market-based instrument (a subsidy) to incentivise the choice of an energy source is strongly valued by the sample (mean score = 3.94). Finally, respondents support the low cost of energy sources, despite considering it less important than the previous two aspects (mean score = 3.78).
3.3. Choice Experiment Results
Our analysis was performed in three steps: first we estimated a multinomial logit model (MNL) to check for the sample parameters mean values; then, we moved to a random parameter logit model (RPL) to analyse whether the sample preferences were characterised by heterogeneity estimating parameters at an individual level; finally, we applied a latent class model (LCM) to check if it was possible to find clusters of respondents with homogeneous preferences.
3.3.1. Mean Sample Preferences
According to our analysis, all estimated parameters were significant in both the MNL and RPL models (
Table 4 and
Figure 2). Looking at the McFadden pseudo-
, both models have a good fit (Louviere et al. [
64] stated that a McFadden pseudo-
statistic in the 0.20–0.30 range is comparable to an ordinary least square adjusted
of 0.70–0.90. Consequently, according to Hensher et al. [
44], it is possible to state that our RPL model has an acceptable fit (McFadden pseudo-
= 0.30)) and explicative capacity, and that it provides a better performance than the MNL model (McFadden pseudo-
= 0.304 vs. 0.221 of the MNL model).
We calculated the relative importance given on average by respondents to the different attributes in choosing a new heating system (
Figure 3). According to the RPL model, respondents seem to be mainly concerned about the system initial cost (36.4% importance), followed by the level of
emissions (23.3%), the type of energy source (17.7%), the energy price (12.2%), and finally by the maintenance costs (10.4%). The results of the relative importance of attributes according to the two models are similar with the exception of the positions of the level of
emissions and the energy price, which in the MNL are inverted, not taking into account preference heterogeneity results in overvaluing the importance of the energy source.
Looking at the estimated coefficients in the RPL model, a greater initial cost decreases the probability of choice, whereas wood and gas are the types of energy sources that mainly increase such probability. Low emissions and costs of maintenance are preferred, while the lower the energy price, the better.
3.3.2. Heterogeneity in Sample Preferences
According to the analysis of the statistical significance of the standard deviation of random parameters in the RPL model (
Table 4), all the variables, apart from energy price at 0.06 €/kWh, present a significant level of heterogeneity (
p-value < 0.05). This result is confirmed by the analysis of the kernel density functions of the estimated random parameters (
Figure 4). Looking in particular at the multimodal distribution of the individual coefficient for the attribute level ‘emissions—Low’ (
Figure 4d), it emerges that, especially for this attribute, there might be three clusters of respondents with homogeneous preferences. This hypothesis was tested analysing the data with an LCM model.
The application of the LCM model confirmed the presence of three clusters of respondents. According to the results reported in
Table 5, the first class includes 16% of the sample, the second class the majority of the sample (63%) and the third class the remaining 21%.
From the analysis of the relative importance given to the DCE attributes (
Figure 5), it emerges that the three classes are quite different in terms of preferences. Members of class 1 give nearly the same importance to the system cost (29.5%) and the
emissions (26%), followed by the energy source (22.3%). The energy price (14%) and maintenance costs (8.1%) are given a secondary role in determining the probability of choice. Members of class 2 have a similar structure in relation to the relative importance of attributes: first, they consider the system energy source (35.3%) and then, the system cost (28.7%) and
emissions (21.4%). Similar to the previous class, the energy (7.1%) and maintenance cost (8.1%) attributes have the least influence when choosing a new energy system. The third class presents quite a distinctive character compared with the previous two. Its members are guided nearly exclusively by the system energy source type (65.2%) when making their choices; all other aspects are given relatively very low attention. The systems cost weight is 12.6%, maintenance and energy costs are about 10%, and
emissions are nearly neglected (2.3%).
In more detail, members of class one (16%) are particularly keen on a heating system that is environmentally friendly (Low emissions), and has low maintenance and energy costs and they are very concerned about the system costs. We can define this class of people as ‘Green and cost conscious’. In terms of energy source, the utility of this group of customers is negatively affected by natural gas and heat pump systems (wood is not statistically significant).
The second class of respondents (‘Incentive driven’), which is the most numerous (63%), has a slight preference for natural gas and heat pump over wood systems, and is careful about emissions and all system costs. Compared with members of the first class, members of this class are older, place more importance on public incentives, and less importance on the initial investment cost in driving their choice.
Members of class three (21%) pay particular attention to the energy source, showing a strong preference for wood, followed by natural gas, and finally by heat pump. These people care about maintenance and energy costs, and less about initial system cost. This class of people is not affected by the environmental effect of the system in making their choices and declared to be less affected by environmental concern than members of class one. In terms of age, class three has a higher age than class one and declares that they give more importance to the system cost and the presence of incentives. We can label this class as ‘Wood heaters lovers’.
3.4. Policy Implications
Looking in particular at the effect of a potential label reporting the emissions of the heating system, we can conclude that it will have a significant and positive effect on 16% of the sample, a good effect on 63% and no effect on the remaining 21%. A further datum that emerges from our LCM analysis is that 79% of the sample pays great attention to the system’s initial cost, and that 21%, despite being less sensitive to the investment amount, has a very strong preference for wood systems.
This scenario suggests that public subsidies would be useful in driving consumer choices for a future environment-friendly heating system, but that they are not enough to induce consumers to switch to more ‘climate-friendly systems.’ Such economic incentive should be targeted to systems labelled as ‘greenhouse friendly’: the joint application of these measures (subsidy plus green label) should be able to provide a stronger incentive to consumers and have a stronger effect in the long run in terms of lowering the domestic sector climate effect.
To test this hypothesis we ran some simulations using the MNL model results, in order to check how the market share changes when providing a subsidy and/or a green label on the heating system. In the first simulation (simulation 1), we provided a progressive subsidy from 0% to 100% of the natural gas system initial cost. In the second simulation (simulation 2), we applied the same subsidy and labelled the natural gas choice option as ‘low
emissions’. Results are displayed in
Figure 6 and
Figure 7. Before the simulations, the initial market share was 7.93% for the ‘no choice’ option, 21.7% for ‘natural gas’, 35.17% for ‘heat pump’ and 35.2% for ‘wood’.
The first simulation results in an increase in people choosing the natural gas system; with a 100% subsidy, the market share of natural gas grows to 41.5%, an increase of 19.8 percentage points, whereas, with the second simulation at the same subsidy level, the final market share is 56.82% (35.12 percentage points increase). The joint application of the subsidy and ‘low emission label’ results in a market share gain of 35.12 percentage points. It is interesting to notice that the effect of the label without any subsidy brings the market share of natural gas from 21.7% to 29.2%: an increase of 7.5 percentage points. If we compare the two simulations, the effect of the subsidy alone counts for a 19.8 percentage points increase (at a 100% subsidy level—simulation 1), while the combined effect (simulation 2) results in an increase of 35.12 percentage points, that is nearly 15.32 percentage points greater than the two effects taken separately.
4. Discussion and Conclusions
This study investigates the preferences of Italian home-owners when choosing a new domestic heating system. The focus of our analysis was on understanding the relative importance of key attributes that drive consumer choice and, consequently, the role of a potential label certifying the greenhouse effect of the heating system.
We used a DCE to elicit respondents’ preferences, and this study is the first, to our knowledge, that applies this technique to domestic heating system choices to investigate the relative importance of economic vs. green attributes and to simulate the effect on respondents’ preferences of the introduction of ‘green subsidies’ (i.e., a subsidy on the system cost linked to its environmental performance) in Italy.
Whereas the results of our analysis showed that, on average, respondents place primary importance on the initial system cost (36.4% importance), and then on its environmental performance (23.3% importance) and the type of energy source (17.7% importance) (RPL model results), they also highlighted that respondents have quite heterogeneous preferences with regard to the heating system choice. This aspect should be taken into careful consideration when designing policies aiming at reduction from the domestic sector. For example, according to the LCM model results, a potential label reporting the emissions of the heating system will have a great and positive effect on 16% of the sample, a good effect on 63%, and no effect on the remaining 21%. A further datum that emerges from our LCM analysis is that 79% of the sample (members of clusters 1 and 2) pays great attention to the system’s initial cost, and that 21%, despite being less sensitive to the investment amount, have a very strong preference for the energy source and wood systems in particular.
Although in a number of previous studies [
65], environmental concerns seem not to be an important factor in guiding households’ heating system choices, our results suggest that greenhouse gas emission concerns could be a key determining factor in heating system choice across households. On the one hand, respondents consider it important to have heater systems that reduce the emissions into the atmosphere; on the other hand, they place primary importance on the magnitude of the investment in adopting green technology. As also highlighted by Balcombe et al. [
66], on the one hand, environmental benefit appears to be a significant motivation to install greener heating systems, but on the other hand, capital costs are the most important barrier to installing these systems. Our results seem to confirm Balcombe et al. [
66] findings: it seems that, all things being equal, to encourage Italian people to install heater systems that reduce carbon emissions, it would be better to contribute to the initial cost of the plant than to reduce the management costs. It seems that an incentive-based regulation could influence the willingness of private home-owners and motivate them to renovate their heating systems. Our simulations support the hypothesis that policymakers will achieve greater results in terms of reducing domestic greenhouse gas emissions by applying a combined policy that leverages the importance citizens accord to the different characteristics of the heating system. Our results suggest that the application of a ‘low
emissions’ label would amplify the effect of a subsidy that reduces the initial system costs. The combined effect of a ‘low
emissions’ label and a subsidy on the system cost leads to an increase in the market share that is nearly 15.32 percentage points greater than the effect of a subsidy alone (considering a subsidy of 100% of the system cost, while the increase is of 13 percentage points greater with a subsidy of 65% of the system cost alone).
A further aspect that should be considered is the strong role that a specific energy source plays on people’s preferences: for example, in our case 21% of people show a very strong preference for wood systems. This might be because of the regional environment of the person, such as the Alpine mountains with a high availability of wood for heating purposes, or because of a subjective preference for the kind of heat that a system provides, for example, a perceived ‘drier heat’ provided by wood systems. In this respect, policymakers should consider such differences, and design a green-labelling policy/low emissions certification for the different systems. This would also help capture the attention of people that would otherwise stick to an ‘energy source’ specific system, neglecting to consider its greenhouse effect.
These insights could support designing socially acceptable governmental policies and tools, to improve and increase the share of sustainable systems used by residential households for heating.
Given the objective of the survey data, this study might not include all aspects of renewable energy sources. For this reason, it is suggested that future studies should incorporate respondents’ opinions on a larger range of heating systems characteristics. Moreover, it would be interesting to investigate consumers’ preferences in other regions and countries in order to compare our results. Despite its limitations, we believe this study contributes to the existing literature on consumer perceptions about ’climate friendly’ domestic heating systems by identifying the drivers of heating system choices and adding information that may be useful both to marketers and institutional decision makers.