Minimum Radiant Exposure and Irradiance for Triggering Adequate Polymerization of a Photo-Polymerized Resin Cement
Abstract
:1. Introduction
2. Materials and Methods
2.1. Specimen Preparation
2.2. Determination of the Minimum RE
2.3. Determination of the Minimum Irradiance
2.4. Statistical Analysis
3. Results
4. Discussion
5. Conclusions
Author Contributions
Funding
Institutional Review Board Statement
Informed Consent Statement
Data Availability Statement
Conflicts of Interest
References
- Borges, G.; Agarwal, P.; Miranzi, B.; Platt, J.; Valentino, T.; dos Santos, P. Influence of different ceramics on resin cement Knoop Hardness Number. Oper. Dent. 2008, 33, 622–628. [Google Scholar] [CrossRef]
- Ozturk, E.; Bolay, S.; Hickel, R.; Ilie, N. Shear bond strength of porcelain laminate veneers to enamel, dentine and enamel-dentine complex bonded with different adhesive luting systems. J. Dent. 2013, 41, 97–105. [Google Scholar] [CrossRef]
- Kilinc, E.; Antonson, S.A.; Hardigan, P.C.; Kesercioglu, A. The effect of ceramic restoration shade and thickness on the polymerization of light- and dual-cure resin cements. Oper. Dent. 2011, 36, 661–669. [Google Scholar] [CrossRef]
- Hooshmand, T.; Mohajerfar, M.; Keshvad, A.; Motahhary, P. Microleakage and marginal gap of adhesive cements for noble alloy full cast crowns. Oper. Dent. 2011, 36, 258–265. [Google Scholar] [CrossRef] [PubMed]
- Janda, R.; Roulet, J.F.; Latta, M.; Kaminsky, M.; Ruttermann, S. Effect of exponential polymerization on color stability of resin-based filling materials. Dent. Mater. 2007, 23, 696–704. [Google Scholar] [CrossRef] [PubMed]
- Knezevic, A.; Zeljezic, D.; Kopjar, N.; Tarle, Z. Cytotoxicity of Composite Materials Polymerized with LED Curing Units. Oper. Dent. 2008, 33, 23–30. [Google Scholar] [CrossRef] [PubMed] [Green Version]
- Ozturk, E.; Bolay, S.; Hickel, R.; Ilie, N. Effects of ceramic shade and thickness on the micro-mechanical properties of a light-cured resin cement in different shades. Acta Odontol. Scand. 2015, 73, 503–507. [Google Scholar] [CrossRef] [PubMed]
- Hadis, M.; Leprince, J.G.; Shortall, A.C.; Devaux, J.; Leloup, G.; Palin, W.M. High irradiance curing and anomalies of exposure reciprocity law in resin-based materials. J. Dent. 2011, 39, 549–557. [Google Scholar] [CrossRef] [PubMed]
- Selig, D.; Haenel, T.; Hausnerova, B.; Moeginger, B.; Labrie, D.; Sullivan, B.; Price, R.B. Examining exposure reciprocity in a resin based composite using high irradiance levels and real-time degree of conversion values. Dent. Mater. 2015, 31, 583–593. [Google Scholar] [CrossRef] [PubMed]
- Rueggeberg, F.A.; Caughman, W.F.; Curtis, J.W. Effect of light intensity and exposure duration on cure of resin composite. Oper. Dent. 1994, 19, 26–32. [Google Scholar] [PubMed]
- Fan, P.L.; Schumacher, R.M.; Azzolin, K.; Geary, R.; Eichmiller, F.C. Curing-light intensity and depth of cure of resin-based composites tested according to international standards. J. Am. Dent. Assoc. 2002, 133, 429–434. [Google Scholar] [CrossRef] [PubMed]
- Barghi, N.; Berry, T.; Hatton, C. Evaluating Intensity Output of Curing Lights in Private Dental Offices. J. Am. Dent. Assoc. 1994, 125, 992–996. [Google Scholar] [CrossRef] [PubMed]
- Almeida, J.R.; Schmitt, G.U.; Kaizer, M.R.; Boscato, N.; Moraes, R.R. Resin-based luting agents and color stability of bonded ceramic veneers. J. Prosthet. Dent. 2015, 114, 272–277. [Google Scholar] [CrossRef] [PubMed]
- Al-Dwairi, Z.N.; Alkhatatbeh, R.M.; Baba, N.Z.; Goodacre, C.J. A comparison of the marginal and internal fit of porcelain laminate veneers fabricated by pressing and CAD-CAM milling and cemented with 2 different resin cements. J. Prosthet. Dent. 2019, 121, 470–476. [Google Scholar] [CrossRef] [PubMed]
- Sener, I.; Turker, B.; Valandro, L.F.; Ozcan, M. Marginal gap, cement thickness, and microleakage of 2 zirconia crown systems luted with glass ionomer and MDP-based cements. Gen. Dent. 2014, 62, 67–70. [Google Scholar] [PubMed]
- Flury, S.; Lussi, A.; Hickel, R.; Ilie, N. Light curing through glass ceramics with a second- and a third-generation LED curing unit: Effect of curing mode on the degree of conversion of dual-curing resin cements. Clin. Oral. Investig. 2013, 17, 2127–2137. [Google Scholar] [CrossRef] [PubMed] [Green Version]
- Watanabe, H.; Kazama, R.; Asai, T.; Kanaya, F.; Ishizaki, H.; Fukushima, M.; Okiji, T. Efficiency of dual-cured resin cement polymerization induced by high-intensity LED curing units through ceramic material. Oper. Dent. 2015, 40, 153–162. [Google Scholar] [CrossRef] [PubMed] [Green Version]
- Morimoto, S.; Zanini, R.A.M.; Meira, J.B.C.; Agra, C.M.; Calheiros, F.C.; Nagase, D.Y. Influence of physical assessment of different light-curing units on irradiance and composite microhardness top/bottom ratio. Odontology 2016, 104, 298–304. [Google Scholar] [CrossRef] [PubMed]
- Tango, R.N.; Sinhoreti, M.A.; Correr, A.B.; Correr-Sobrinho, L.; Henriques, G.E. Effect of Light-Curing Method and Cement Activation Mode on Resin Cement Knoop Hardness. J. Prosthodont. 2007, 16, 480–484. [Google Scholar] [CrossRef] [PubMed]
- Bragança, G.F.; Vianna, A.S.; Neves, F.D.; Price, R.B.; Soares, C.J. Effect of exposure time and moving the curing light on the degree of conversion and Knoop microhardness of light-cured resin cements. Dent. Mater. 2020, 36, e340–e351. [Google Scholar] [CrossRef] [PubMed]
- Peutzfeldt, A.; Lussi, A.; Flury, S. Effect of High-Irradiance Light-Curing on Micromechanical Properties of Resin Cements. Biomed. Res. Int. 2016, 2016, 4894653. [Google Scholar] [CrossRef]
- Cadenaro, M.; Navarra, C.O.; Antoniolli, F.; Mazzoni, A.; Di Lenarda, R.; Rueggeberg, F.A.; Breschi, L. The effect of curing mode on extent of polymerization and microhardness of dual-cured, self-adhesive resin cements. Am. J. Dent. 2010, 23, 14–18. [Google Scholar]
- Hooshmand, T.; Mahmoodi, N.; Keshvad, A. Microhardness of a resin cement polymerized by light-emitting diode and halogen lights through ceramic. J. Prosthodont. 2009, 18, 411–416. [Google Scholar] [CrossRef] [PubMed]
- Watts, D.C. Reaction kinetics and mechanics in photo-polymerised networks. Dent. Mater. 2005, 21, 27–35. [Google Scholar] [CrossRef] [PubMed]
- Pilo, R.; Folkman, M.; Arieli, A.; Levartovsky, S. Marginal Fit and Retention Strength of Zirconia Crowns Cemented by Self-adhesive Resin Cements. Oper. Dent. 2018, 43, 151–161. [Google Scholar] [CrossRef]
- Peroz, I.; Mitsas, T.; Erdelt, K.; Kopsahilis, N. Marginal adaptation of lithium disilicate ceramic crowns cemented with three different resin cements. Clin. Oral. Investig. 2019, 23, 315–320. [Google Scholar] [CrossRef] [PubMed]
- Tongtaksin, A.; Leevailoj, C. Battery Charge Affects the Stability of Light Intensity from Light-emitting Diode Light-curing Units. Oper. Dent. 2017, 42, 497–504. [Google Scholar] [CrossRef]
- Sadeghyar, A.; Watts, D.C.; Schedle, A. Limited reciprocity in curing efficiency of bulk-fill resin-composites. Dent. Mater. 2020, 36, 997–1008. [Google Scholar] [CrossRef]
- Palagummi, S.V.; Hong, T.; Wang, Z.; Moon, C.K.; Chiang, M.Y.M. Resin viscosity determines the condition for a valid exposure reciprocity law in dental composites. Dent. Mater. 2020, 36, 310–319. [Google Scholar] [CrossRef]
- Musanje, L.; Darvell, B.W. Polymerization of resin composite restorative materials: Exposure reciprocity. Dent. Mater. 2003, 19, 531–541. [Google Scholar] [CrossRef]
- Peutzfeldt, A.; Asmussen, E. Resin composite properties and energy density of light cure. J. Dent. Res. 2005, 84, 659–662. [Google Scholar] [CrossRef] [PubMed]
- Dewaele, M.; Asmussen, E.; Peutzfeldt, A.; Munksgaard, E.; Benetti, A.; Finné, G.; Leloup, G.; Devaux, J. Influence of curing protocol on selected properties of light-curing polymers: Degree of conversion, volume contraction, elastic modulus, and glass transition temperature. Dent. Mater. 2009, 25, 1576–1584. [Google Scholar] [CrossRef] [PubMed]
- Asmussen, E.; Peutzfeldt, A. Polymerization contraction of resin composite vs. energy and power density of light-cure. Eur. J. Oral Sci. 2005, 113, 417–421. [Google Scholar] [CrossRef] [PubMed]
- Leprince, J.G.; Hadis, M.; Shortall, A.C.; Ferracane, J.L.; Devaux, J.; Leloup, G.; Palin, W.M. Photoinitiator type and applicability of exposure reciprocity law in filled and unfilled photoactive resins. Dent. Mater. 2011, 27, 157–164. [Google Scholar] [CrossRef] [PubMed]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Li, Q.; Lin, H.-L.; Zheng, M.; Ozcan, M.; Yu, H. Minimum Radiant Exposure and Irradiance for Triggering Adequate Polymerization of a Photo-Polymerized Resin Cement. Materials 2021, 14, 2341. https://doi.org/10.3390/ma14092341
Li Q, Lin H-L, Zheng M, Ozcan M, Yu H. Minimum Radiant Exposure and Irradiance for Triggering Adequate Polymerization of a Photo-Polymerized Resin Cement. Materials. 2021; 14(9):2341. https://doi.org/10.3390/ma14092341
Chicago/Turabian StyleLi, Qi, Hong-Lei Lin, Ming Zheng, Mutlu Ozcan, and Hao Yu. 2021. "Minimum Radiant Exposure and Irradiance for Triggering Adequate Polymerization of a Photo-Polymerized Resin Cement" Materials 14, no. 9: 2341. https://doi.org/10.3390/ma14092341