Next Article in Journal
Porosity Formation in Thin Welded Joints of Al–MG–LI Alloys
Next Article in Special Issue
Assessment of the Influence of Selected Technological Parameters on the Morphology Parameters of the Cutting Surfaces of the Hardox 500 Material Cut by Abrasive Water Jet Technology
Previous Article in Journal
The Penetration–Explosion Effects of Differently Distributed Inactive/Active Composite Shaped Charge Jets
Previous Article in Special Issue
Impact of Preparation of Titanium Alloys on Their Abrasive Water Jet Machining
 
 
Article

Article Versions Notes

Materials 2022, 15(1), 345; https://doi.org/10.3390/ma15010345
Action Date Notes Link
article xml file uploaded 4 January 2022 10:35 CET Original file -
article xml uploaded. 4 January 2022 10:35 CET Update https://www.mdpi.com/1996-1944/15/1/345/xml
article pdf uploaded. 4 January 2022 10:35 CET Version of Record https://www.mdpi.com/1996-1944/15/1/345/pdf
article html file updated 4 January 2022 10:36 CET Original file -
article html file updated 31 July 2022 01:56 CEST Update https://www.mdpi.com/1996-1944/15/1/345/html
Back to TopTop