Special Issue of Materials focusing on “Finite Element Analysis and Models of Sustainable Manufacturing Processes”
Funding
Conflicts of Interest
References
- Aguilar, F.J.J.-E.; Vélez Godiño, J.A.; Torres García, M.; Gallardo Fuentes, J.M.; Díaz Gutiérrez, E. Thermal Modeling of the Port on a Refining Furnace to Prevent Copper Infiltration and Slag Accretion. Materials 2021, 14, 6978. [Google Scholar] [CrossRef] [PubMed]
- Caiazzo, F.; Guillen, D.G.; Alfieri, V. Simulation of the Mechanical Behaviour of Metal Gyroids for Bone Tissue Application. Materials 2021, 14, 4808. [Google Scholar] [CrossRef] [PubMed]
- Lanzetta, M.; Gharibi, A.; Picchi Scardaoni, M.; Vivaldi, C. FEM and Analytical Modeling of the Incipient Chip Formation for the Generation of Micro-Features. Materials 2021, 14, 3789. [Google Scholar] [CrossRef] [PubMed]
- Wie, Y.M.; Lee, K.G.; Lee, K.H.; Ko, T.; Lee, K.H. The Experimental Process Design of Artificial Lightweight Aggregates Using an Orthogonal Array Table and Analysis by Machine Learning. Materials 2020, 13, 5570. [Google Scholar] [CrossRef] [PubMed]
- Noriega Lozano, J.I.; Paredes Rojas, J.C.; Romero Ángeles, B.; Urriolagoitia Sosa, G.; Contreras Mendoza, B.A.; Torres San Miguel, C.R.; Polupan, G.; Urriolagoitia Calderón, G.M. Redesign of a Piston for a Diesel Combustion Engine to Use Biodiesel Blends. Materials 2021, 14, 2812. [Google Scholar] [CrossRef] [PubMed]
- Blinzler, B.J.; Khalili, P.; Ahlström, J. Integrated Computational Material Design for PMC Manufacturing with Trapped Rubber. Materials 2020, 13, 3825. [Google Scholar] [CrossRef] [PubMed]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Giardini, C.; D’Urso, G. Special Issue of Materials focusing on “Finite Element Analysis and Models of Sustainable Manufacturing Processes”. Materials 2022, 15, 1116. https://doi.org/10.3390/ma15031116
Giardini C, D’Urso G. Special Issue of Materials focusing on “Finite Element Analysis and Models of Sustainable Manufacturing Processes”. Materials. 2022; 15(3):1116. https://doi.org/10.3390/ma15031116
Chicago/Turabian StyleGiardini, Claudio, and Gianluca D’Urso. 2022. "Special Issue of Materials focusing on “Finite Element Analysis and Models of Sustainable Manufacturing Processes”" Materials 15, no. 3: 1116. https://doi.org/10.3390/ma15031116