Next Article in Journal
Assessment of the Influence of Additives on the Mechanical Properties and Machinability of Al-11%Si Cast Alloys: Application of DOE and ANOVA Methods
Next Article in Special Issue
Effect of Post-Fabricated Aging on Microstructure and Mechanical Properties in Underwater Friction Stir Additive Manufacturing of Al–Zn–Mg–Cu Alloy
Previous Article in Journal
Influence of Al/Ti Ratio and Ta Concentration on the As-Cast Microstructure, Phase Composition, and Phase Transformation Temperatures of Lost-Wax Ni-Based Superalloy Castings
Previous Article in Special Issue
Compound Structure–Composition Control on the Mechanical Properties of Selective Laser-Melted Titanium Alloys
 
 
Article

Article Versions Notes

Materials 2022, 15(9), 3298; https://doi.org/10.3390/ma15093298
Action Date Notes Link
article pdf uploaded. 4 May 2022 13:31 CEST Version of Record https://www.mdpi.com/1996-1944/15/9/3298/pdf-vor
article xml file uploaded 5 May 2022 12:07 CEST Original file -
article xml uploaded. 5 May 2022 12:07 CEST Update -
article pdf uploaded. 5 May 2022 12:07 CEST Updated version of record https://www.mdpi.com/1996-1944/15/9/3298/pdf-vor
article html file updated 5 May 2022 12:09 CEST Original file -
article html file updated 6 May 2022 10:12 CEST Update -
article xml file uploaded 11 May 2022 16:08 CEST Update -
article xml uploaded. 11 May 2022 16:08 CEST Update https://www.mdpi.com/1996-1944/15/9/3298/xml
article pdf uploaded. 11 May 2022 16:08 CEST Updated version of record https://www.mdpi.com/1996-1944/15/9/3298/pdf
article html file updated 11 May 2022 16:10 CEST Update -
article html file updated 2 August 2022 22:10 CEST Update https://www.mdpi.com/1996-1944/15/9/3298/html
Back to TopTop