Next Article in Journal
Prediction of Primary Dendrite Arm Spacing of the Inconel 718 Deposition Layer by Laser Cladding Based on a Multi-Scale Simulation
Next Article in Special Issue
Investigations on Stability of Polycarboxylate Superplasticizers in Alkaline Activators for Geopolymer Binders
Previous Article in Journal
Model of a 3D Magnetic Permeability Tensor Considering Rotation and Saturation States in Materials with Axial Anisotropy
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Materials
Volume 16
Issue 9
10.3390/ma16093478
materials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Review of Geopolymer Nanocomposites: Novel Materials for Sustainable Development

by
Anna Drabczyk
1,
Sonia Kudłacik-Kramarczyk
1,*,
Kinga Korniejenko
1,
Beata Figiela
1 and
Gabriel Furtos
2,*
1
Department of Materials Engineering, Faculty of Materials Engineering and Physics, Cracow University of Technology, 37 Jana Pawła II Av., 31-864 Cracow, Poland
2
“Raluca Ripan” Institute for Research in Chemistry, Babes-Bolyai University, 30 Fantanele Street, 400294 Cluj-Napoca, Romania
*
Authors to whom correspondence should be addressed.
Materials 2023, 16(9), 3478; https://doi.org/10.3390/ma16093478
Submission received: 25 March 2023 / Revised: 22 April 2023 / Accepted: 27 April 2023 / Published: 29 April 2023
(This article belongs to the Special Issue Advances in Function Geopolymer Materials)
Browse Figures
Versions Notes

Abstract

:
The demand for geopolymer materials is constantly growing. This, in turn, translates into an increasing number of studies aimed at developing new approaches to the methodology of geopolymer synthesis. The range of potential applications of geopolymers can be increased by improving the properties of the components. Future directions of studies on geopolymer materials aim at developing geopolymers showing excellent mechanical properties but also demonstrating significant improvement in thermal, magnetic, or sorption characteristics. Additionally, the current efforts focus not only on the materials’ properties but also on obtaining them as a result of environment-friendly approaches performed in line with circular economy assumptions. Scientists look for smart and economical solutions such that a small amount of the modifier will translate into a significant improvement in functional properties. Thus, special attention is paid to the application of nanomaterials. This article presents selected nanoparticles incorporated into geopolymer matrices, including carbon nanotubes, graphene, nanosilica, and titanium dioxide. The review was prepared employing scientific databases, with particular attention given to studies on geopolymer nanocomposites. The purpose of this review article is to discuss geopolymer nanocomposites in the context of a sustainable development approach. Importantly, the main focus is on the influence of these nanomaterials on the physicochemical properties of geopolymer nanocomposites. Such a combination of geopolymer technology and nanotechnology seems to be promising in terms of preparation of nanocomposites with a variety of potential uses.

1. Introduction

Geopolymers belong to the group of the fastest-growing polymeric materials. The interest in these inorganic ceramic materials is constantly growing. This is a result of their properties, including acid resistance, porosity, low drying shrinkage, as well as high strength, due to which geopolymers are widely investigated for potential application in the construction industry (e.g., repairing roads, bridges, or other infrastructure) [1,2,3]. Importantly, geopolymers are also used as a substitute for Portland cement. Compared to Portland cement, geopolymers are cheaper, and their fabrication releases less carbon dioxide [4,5].
The use of geopolymers in wastewater treatment (for removing heavy metals) [6,7,8,9], soil stabilization [10], carbon capture and storage [11], or as protective coatings [12,13] is also being investigated. Furthermore, studies on the application potential of these materials for biomedical purposes including tissue engineering [14] or drug delivery systems [15] have also been performed.
The structure of geopolymers consists of networks of inorganic molecules combined by means of covalent bonds. The scheme of the geopolymer framework is presented in Figure 1.
Due to the increasing demand for these materials as well as placing ever higher demands on them, many investigations are being performed to develop geopolymers showing the most beneficial physicochemical properties. Particular attention is paid to studies on geopolymer nanocomposites; the term “geopolymer nanocomposite” refers to the hybrid material made up of a combination of a geopolymer matrix and a nanosized modifying agent. It was demonstrated in many literature reports that the incorporation of various nanomaterials into geopolymer matrices results in significant improvement of their functional properties, including, e.g., compressive strength and stiffness [17,18]. Hence, in this review, a number of geopolymer nanocomposites incorporated with selected nanomaterials are presented, wherein the main focus is on the influence of nano-sized materials on their physicochemical properties.
The review was prepared employing scientific databases such as ScienceDirect, Scopus, and Google Scholar. The Scopus database was used as a starting point. The following keywords were applied at the beginning: “geopolymer” and “nanocomposite” combined together. The research results show 460 documents—this is schematically presented in Figure 2.
Because of the very fast development in the area of nanocomposites, the current review is focused on the most recent publications, especially within the last 3 years, when rapid increases were noted—for comparison, there were 39 publications in 2019 and 82 in 2020, which is presented in Figure 3.
Nevertheless, some older publications of high importance on the topic were also used. It should be noted that most (>75%) of the published works are original articles, whereas less than 15% are review publications. Amongst the review publications, there is a lack of articles that discuss the problem of geopolymer nanocomposites in the context of a sustainable development approach. This article is the answer to this literature gap. The main objective of this review is to present examples of possible incorporations of geopolymer matrices with nano-sized additives. Developed nanocomposites constitute promising materials obtained using waste products and nanomaterials. Such a combination results in forming a material with enhanced properties compared to unmodified geopolymer matrices.
This review article can help the reader in several ways. Firstly, it presents the current state of knowledge on geopolymers and nanocomposite geopolymers, including their various applications and potential uses. The reader can learn about the latest research in this field and understand the benefits of using nanomaterials in geopolymers. Secondly, this article can help the reader understand the complexity of the processes occurring in geopolymers and nanocomposites, as well as their physicochemical properties. The reader can learn about the factors that influence these properties and the methods used to improve them. Thirdly, this article can help the reader understand the concept of sustainable development in the context of using nanocomposite geopolymers. The reader can learn about the materials used to produce these composites and the benefits of their use, such as waste utilization and reduction of carbon dioxide emissions.
Overall, this review article on nanocomposite geopolymers can help the reader understand the latest trends and research results in this field, as well as identify potential applications of these materials.

2. Nanomaterials as Modifiers of Geopolymer Composites

Geopolymerization occurs by mixing a mineral or waste material with an alkaline solution as a function of time and temperature. By adding nanoparticles to the matrix, the alkaline solution is immobilized and the pores between the grains of the raw material are filled, the so-called filler effect [19]. Nanoadditives increase the binding strength of the mixture and participate in pozzolanic reactions, which cause the formation of hydrates of calcium silicates [20].
The following nanoadditives were investigated in geopolymer matrices: nanosilica [21,22], nanocellulose [23,24,25], nanoaluminum [26], nanographite [27], and nano-CaCO3 [28]. The performance of geopolymer composites largely depends on the uniform distribution of nanoadditives in the matrix and their reaction with the matrix.
Among these nanoparticles, nanosilica and nanocellulose are the most popular in research due to their unique properties. Nanocellulose seems to be an excellent reinforcing agent in various types of materials, especially in composites. The use of nanocellulose to replace, for example, synthetic fibers, leads to the production of a more environmentally friendly material. Nanocellulose, due to its origin and availability, can be successfully used in materials at low concentrations up to several %, due to the interaction between the matrix, e.g., polymer, and nanoparticles [29].
In Table 1 a summary of the influence of selected nanoadditives on properties of geopolymer nanocomposites has been presented.
The use of nanoadditives in geopolymer matrices has a large impact on the proper-ties of the finished material. The basic type of properties most often determined in geo-polymers are mechanical properties, namely compressive strength and bending strength [36].
Research shows that the addition of nano-SiO2 to 2% wt. increases the compressive strength by up to 80% compared to geopolymer based on unmodified fly ash cured at room temperature [37]. Subsequent studies with the addition of nanosilica were carried out on geopolymer samples with a metakaolin matrix. Also, an improving effect of the nanoadditive on compressive strength was demonstrated, both for mortar cured at 80 °C (increase by 40%) and at 20 °C (increase by 56%), compared to the material without nanosilica introduced into the mix [38].
A limitation in the constructional use of geopolymers is their quasi-brittle cracking. Therefore, along with the introduction of nano-SiO2, scientists introduce various types of fibers into the geopolymer matrix to improve the structural properties and durability of geopolymers [30]. Thus, the introduction of a combination of PVA fibers and nanosilica particles to the fly ash and the activator increased the compressive strength (by 26% on average) and the fracture toughness compared to the reference sample [39].
The use of the addition of aluminum nanooxide to improve mechanical strength also brings good results. Research by Phoo-ngernkham et al. showed that for 1% wt. of nano-Al2O3 content, the compressive strength of geopolymer paste with fly ash increases by about 43%. Optimally, to maintain the best strength, it is not to exceed the addition of 3% wt. of nanoparticles [40].
A positive effect on the strength properties was also noted for calcium carbonate nanoparticles, especially for thermal hardening of the geopolymer for 24 h (increase in strength by approx. 60%) [41].
Research on geopolymers can take place at various stages of the process of their creation. One of these is the course of geopolymerization. In its course, nanoparticles can have different effects. The addition of nanosilica to fly-ash-based geopolymers increases the activity of the matrix material, and thus accelerates the geopolymerization process, increasing the length of the C–S hydrogen gel chain, which gives the effect of filling with small particles. Finally, the fly ash and nano-SiO2 geopolymerize to form a three-site reticular inorganic gel material with Si–Al–O cross-linking [42].
The higher the nano-SiO2 content, the shorter is the setting time. This is mainly due to the unique “surface effect” of nano-SiO2. The high surface area of nano-SiO2 has high activity and surface energy, which enriches the surrounding free phase on the surface of the nanomaterial, thus accelerating the geopolymerization process. At the same time, the concentration of monomers such as -OSi(OH)3-, -OSi(OH)2O- in the system accelerates the hydration and condensation hardening of fly ashes [43].
For construction materials, the important properties are resistance to freezing and propagation. It is no different in the case of geopolymer materials, where this property can be determined on the basis of the coefficient of loss of geopolymer compressive strength [44].
Most of the current research [3,18] on geopolymers reinforced with various nanomaterials is at an early stage, and little research has focused on their value for engineering applications and their sustainable aspects. Moreover, dynamic properties and properties after increased temperature are important for the safety of concrete structures. However, the current research [18,45] results focus on the static mechanical properties of nano-SiO2- and nanocellulose-modified geopolymer composites, and little research concerns dynamic mechanical properties and properties after elevated temperature. Therefore, further research on the dynamic properties of nanocomposites before and after their treatment with elevated temperature is needed to accelerate the development of geopolymers enriched with nanoadditives and increase their utility value. In Table 2. the impact of the introduction of the nanoclay nanoparticles into the geopolymers based on volcanic tuff and fly-ash slag has been reported.
Nanocomposite materials show both advantages and disadvantages [6,7,8] which are presented in Figure 4.
Despite of some disadvantages of nanocomposites, they show many interesting properties which result in growing interest in studies on these materials. Some examples of such nanocomposites are presented in the following section.

3. Geopolymer Nanocomposites Reinforced with Selected Nanomaterials

3.1. Geopolymer Nanocomposites Reinforced with Carbon Nanotubes

Geopolymer nanocomposites reinforced with carbon nanotubes (CNTs) have gained significant attention in recent years due to their unique mechanical, thermal, and electrical properties. Carbon nanotubes are cylindrical carbon molecules that have exceptional mechanical, electrical, and thermal properties. In this subsection, the synthesis, properties, and applications of CNT-containing geopolymer nanocomposites are described. There are two main approaches used to these nanocomposites: in situ and ex situ methods. In situ methods involve the addition of carbon nanotubes during the synthesis of the geopolymer matrix. In turn, ex situ processes involve the addition of pre-synthesized carbon nanotubes to the geopolymer matrix. In situ methods are advantageous because they result in a more homogeneous distribution of CNTs within the geopolymer matrix. However, they require careful control of the synthesis parameters, such as pH and temperature, to prevent the degradation of the carbon nanotubes. Ex situ methods are easier to control, but the dispersion of the carbon nanotubes within the geopolymer matrix is not as uniform [48,49,50].
Geopolymer nanocomposites with CNTs show excellent mechanical properties, including high tensile strength, compressive strength, and flexural strength. The addition of carbon nanotubes improves the fracture toughness and reduces the brittleness of the geopolymer matrix. The high aspect ratio of carbon nanotubes also enhances the load transfer between the matrix and the reinforcement [51,52,53]. Additionally, CNT-containing geopolymer nanocomposites have superior thermal properties compared to traditional composites. The addition of carbon nanotubes enhances the thermal conductivity of the geopolymer matrix, which is important for applications such as thermal management. The thermal stability of the geopolymer matrix is also improved by the addition of carbon nanotubes. The described nanocomposites also demonstrate excellent electrical properties, including high electrical conductivity and low dielectric constant. These properties make them suitable for applications such as electromagnetic shielding and energy storage [54,55,56].
Geopolymer nanocomposites containing CNTs have potential applications in various industries, including aerospace, automotive, and construction. In the aerospace industry, these materials can be used to manufacture lightweight, high-strength components. In the automotive industry, they can be used to manufacture components with improved fuel efficiency and reduced emissions. In the construction industry, they can be used to manufacture high-strength, durable building materials. Overall, this type of nanocomposite is a promising class of materials with superior mechanical, thermal, and electrical properties. The addition of carbon nanotubes enhances the properties of geopolymer matrices, making them suitable for a wide range of applications. However, further research is needed to optimize the synthesis parameters and to investigate the long-term stability of these materials [57,58,59,60].

3.2. Geopolymer Nanocomposites Containing Graphene and Graphene Oxide

Geopolymer nanocomposites containing graphene and graphene oxide have been extensively studied in recent years due to their unique properties and potential applications in various industries. Graphene and graphene oxide are two-dimensional carbon-based materials that have excellent mechanical, electrical, and thermal properties. Several methods are used to synthesize geopolymer nanocomposites containing graphene and graphene oxide, including in situ and ex situ methods, which involve the addition of graphene or graphene oxide during the synthesis of the geopolymer matrix (in situ) and the addition of pre-synthesized graphene or graphene oxide to the geopolymer matrix (ex situ). More uniform distribution of graphene or graphene oxide within the composite matrix is achieved via in situ processes which, in turn, require strict control of the process conditions (temperature, pH etc.) [61,62,63,64,65].
Geopolymer nanocomposites with graphene and graphene oxide exhibit excellent mechanical properties, including high tensile strength, compressive strength, and flexural strength. The addition of graphene or graphene oxide improves the fracture toughness and reduces the brittleness of the geopolymer matrix. The high aspect ratio of graphene or graphene oxide also enhances the load transfer between the matrix and the reinforcement. Importantly, such nanocomposites demonstrate superior thermal properties, enhanced thermal conductivity, and thermal stability compared to composites without these nanoadditives. Moreover, graphene and graphene oxide nanocomposites exhibit excellent electrical properties, including high electrical conductivity and low dielectric constant, which make them useful in terms of their application in electromagnetic shielding and energy storage [66,67,68,69,70].
The overall influence of graphene on selected physicochemical characteristics of geopolymers is illustrated in Figure 5.
The discussed nanocomposites have potential applications in various industries, including aerospace, automotive, and construction. In the aerospace industry, these materials can be used to manufacture lightweight, high-strength components. In the automotive industry, they can be used to manufacture components with improved fuel efficiency and reduced emissions. In the construction industry, they can be used to manufacture high-strength, durable building materials. Such wide range of applications of the nanocomposites is due to their superior electrical, mechanical, and thermal properties [71,72,73,74].

3.3. Geopolymer Nanocomposites Reinforced with Nanoclay

Geopolymer nanocomposites reinforced with nanoclay are a type of material that has gained significant attention in recent years. These composites combine the benefits of geopolymer technology, such as high strength and durability, with the reinforcing effects of nanoclay particles, resulting in improved mechanical, thermal, and chemical properties. The synthesis of geopolymer nanocomposites reinforced with nanoclay can be achieved using various methods, although the most common is the in situ method, where nanoclay particles are added during the synthesis of the geopolymer matrix [75,76].
Geopolymer nanocomposites containing nanoclay demonstrate improved mechanical properties such as enhanced strength, stiffness, and toughness. This is due to the high aspect ratio of the nanoclay particles, which reinforce the geopolymer matrix by acting as a physical barrier against crack propagation. The addition of nanoclay particles also improves the thermal stability of the geopolymer matrix, making it suitable for high-temperature applications. Additionally, the presence of nanoclay particles can improve the chemical resistance of geopolymer nanocomposites, providing protection against chemical degradation [77,78].
Importantly, nanoclay-containing geopolymer nanocomposites have applications in the construction, automotive, and aerospace, industries. In the construction industry, these materials can be used to manufacture high-strength, durable building materials, such as pipes and panels. In turn, in the aerospace industry, they can be used to manufacture lightweight components for aircraft and space vehicles. In the automotive industry, they can be used to manufacture components with improved fuel efficiency and reduced emissions [79,80,81].
Despite the numerous benefits of geopolymer nanocomposites reinforced with nanoclay, there are still some challenges that need to be addressed. One of the primary challenges is the cost of producing these materials, as nanoclay particles are relatively expensive. Furthermore, the optimization of the synthesis parameters, such as pH and temperature, is crucial to ensure consistent and reproducible results [82,83].
In the future, research will focus on the development of more cost-effective methods for producing the described geopolymer nanocomposites. Additionally, further research is needed to investigate the long-term stability of these materials under various environmental conditions, such as exposure to UV radiation and humidity. The development of new applications for geopolymer nanocomposites reinforced with nanoclay will also be an area of focus in the coming years. Geopolymer nanocomposites with nanoclay are a promising class of materials with improved mechanical, thermal, and chemical properties. These materials have the potential for various applications in the construction, aerospace, and automotive industries. Although there are still some challenges that need to be addressed, the development of cost-effective methods for producing these materials and the investigation of their long-term stability will drive future research in this field [84,85,86].

3.4. Geopolymer Nanocomposites with Magnetic Nanoparticles

The incorporation of magnetic nanoparticles into geopolymer nanocomposites has added a new dimension to the potential applications of these materials, making them suitable for a range of innovative technologies, including drug delivery, environmental remediation, and magnetic separation. The synthesis of geopolymer nanocomposites with magnetic nanoparticles can be achieved using both in situ and ex situ approaches [61].
Geopolymer nanocomposites with magnetic nanoparticles exhibit improved magnetic properties such as enhanced magnetic susceptibility, magnetic field response, and magnetic saturation. This is due to the presence of magnetic nanoparticles, which are capable of responding to external magnetic fields. Additionally, the incorporation of magnetic nanoparticles does not significantly affect the mechanical, thermal, and chemical properties of geopolymer nanocomposites [87,88,89].
Magnetic-nanoparticle-containing geopolymer nanocomposites have the potential for various applications in the fields of drug delivery, environmental remediation, and magnetic separation. In the field of drug delivery, these materials can be used as drug carriers, which can be magnetically guided to specific sites in the body. In the field of environmental remediation, they can be used to remove contaminants from water and soil by magnetically separating them from the environment. In the field of magnetic separation, they can be used to separate and purify magnetic materials from non-magnetic materials [90,91].
In spite of the many benefits of the described nanocomposites, there are still some challenges that need to be addressed. One of the primary challenges is the optimization of the synthesis parameters, such as pH and temperature, to ensure consistent and reproducible results. Additionally, the cost of producing these materials needs to be reduced to make them more economically feasible [92,93,94].
In the future, research will focus on the development of more cost-effective methods for producing geopolymer nanocomposites with magnetic nanoparticles. Additionally, further research is needed to investigate the long-term stability of these materials under various environmental conditions, such as exposure to humidity and corrosive environments. The development of new applications for geopolymer nanocomposites with magnetic nanoparticles will also be an area of focus in the coming years. Geopolymer nanocomposites with magnetic nanoparticles constitute an interesting class of materials showing enhanced magnetic properties, which makes them appropriate for a range of innovative technologies. However, the development of cost-effective methods for producing these materials and the investigation of their long-term stability will drive future research in this field. The potential applications of these materials in drug delivery, environmental remediation, and magnetic separation make them an exciting area of research in the field of materials science [95,96,97].

3.5. Geopolymer Nanocomposites Reinforced with Titanium Dioxide Nanoparticles

Geopolymer nanocomposites reinforced with nanoparticles, such as titanium dioxide (TiO2), have been developed to enhance their mechanical, thermal, and chemical properties. The synthesis of geopolymer nanocomposites reinforced with TiO2 can be achieved using the same approaches as in the case of the nanocomposites described in previous subsections of this paper, i.e., ex situ and in situ [98].
Geopolymer nanocomposites containing TiO2 nanoparticles exhibit improved mechanical, thermal, and chemical properties such as enhanced flexural strength, compressive strength, thermal stability, and resistance to chemical attack. This is due to the presence of TiO2 nanoparticles, which act as reinforcement agents, filling the gaps between the geopolymer matrix and improving its mechanical properties. Additionally, the incorporation of TiO2 nanoparticles can improve the photocatalytic activity of geopolymer nanocomposites. These nanocomposites have the potential for various applications in the fields of construction, environmental remediation, and energy storage. In the field of construction, these materials can be used to produce high-performance, durable building materials, such as concrete and mortar. In the case of environmental remediation, they can be used to remove contaminants from water and soil by photocatalytic degradation, while in the area of energy storage, they may be applied to produce high-performance supercapacitors [99,100,101].
Considering further studies on these nanocomposites, aspects such as pH and temperature employed during their synthesis should be investigated so as to obtain desirable results. Furthermore, their long-term stability and durability under various conditions also need to be verified. In the future, research will focus on the development of more cost-effective methods for producing geopolymer nanocomposites reinforced with TiO2. Additionally, further research is needed to investigate the effects of TiO2 particle size, shape, and surface modification on the properties of geopolymer nanocomposites. So far, the incorporation of TiO2 in geopolymer matrix has shown to improve the mechanical properties such as compressive strength, flexural strength, and fracture toughness. This improvement is due to the enhanced interfacial bonding between the geopolymer matrix and TiO2 particles. Additionally, TiO2 improves the thermal stability of geopolymer nanocomposites [102,103,104].
In conclusion, geopolymer nanocomposites reinforced with TiO2 have shown significant potential for various applications in the fields of construction, biomedicine, and environmental remediation. The development of these materials will undoubtedly contribute to the advancement of materials science, particularly in the search for sustainable and eco-friendly materials [105,106].

3.6. Geopolymer Nanocomposites Reinforced with Nanosilica

The addition of nanoparticles, such as nanosilica, to geopolymer matrices has been studied to improve their properties further. Nanosilica can be synthesized using various methods, including sol-gel, precipitation, and hydrothermal methods. The most commonly used method for the synthesis of nanosilica is the sol-gel method, which involves the hydrolysis and condensation of silicon alkoxides. The resulting nanosilica particles can then be incorporated into geopolymer matrices using in situ or ex situ methods [61].
Incorporation of nanosilica into geopolymer matrices has been shown to improve their mechanical, thermal, and chemical properties. The incorporation of nanosilica increases the density and reduces the porosity of the geopolymer matrix, resulting in improved mechanical properties such as compressive strength, flexural strength, and fracture toughness. Nanosilica also enhances the thermal stability of geopolymers and improves their chemical resistance, making them more resistant to acid and alkali attack. As a result, the addition of nanosilica to geopolymer matrices has expanded their potential applications in various fields, such as construction, energy, and environmental remediation. In the field of construction, geopolymer-based composites reinforced with nanosilica have been shown to produce high-performance materials, such as mortar and concrete. In the energy sector, geopolymer-based materials reinforced with nanosilica can be used for energy storage, such as supercapacitors. In environmental remediation, geopolymer-based composites reinforced with nanosilica have been used to remove heavy metals and organic pollutants from contaminated water [107,108,109,110].
Importantly, introduction of nanosilica into geopolymer matrices has been shown to improve their chemical, mechanical, and thermal properties. The incorporation of nanosilica increases the density and reduces the porosity of the geopolymer matrix, resulting in improved mechanical properties such as compressive strength, flexural strength, and fracture toughness. Additionally, the improved thermal stability and chemical resistance make nanosilica-modified geopolymer matrices suitable for a wide range of applications in construction, energy storage, and environmental remediation [111,112,113,114].
Despite the potential benefits, there are still challenges that need to be addressed. With continued research, it is likely that nanosilica-modified geopolymer matrices will become even more versatile and cost-effective, making them a promising alternative to traditional cement-based materials. Overall, the addition of nanosilica to geopolymer matrices shows great promise for enhancing the properties and expanding the potential applications of these inorganic materials [115,116].
The influence of nanomaterials on selected properties of geopolymer nanocomposites is summarized in Table 3.
Geopolymers are ceramic materials obtained from mineral raw materials such as fly ash or slag. Nanomaterial additives are used to improve the mechanical and thermal properties of geopolymers.
The mechanism of action of nanomaterial additives on the structure and properties of geopolymers is complex and depends on the type of nanomaterial, its concentration, the method of introduction into the geopolymer structure, and the conditions during production and curing.
In research conducted by De Silva et al. [175], the addition of carbon nanotubes to a geopolymer mixture increased its compressive and flexural strength by approximately 29% and 21%, respectively. Similar results were obtained by using silica nanoparticles [176] and aluminum oxide [177].
Nanomaterial additives can affect the structure of geopolymers by increasing the number of crosslinking bonds, reducing porosity, and improving homogeneity. In addition, nanomaterials can affect the phase structure of geopolymers and their thermal decomposition [178].
However, it is worth noting that the results of studies on the impact of nanomaterials on the properties of geopolymers are varied and not always clear. The introduction of nanomaterials into geopolymer mixtures requires further research and optimization of production processes to obtain materials with desired properties.

4. Sustainability of Geopolymer Nanocomposites

Geopolymer nanocomposites are a type of sustainable composite material that has been gaining increasing attention in recent years. These materials are composed of a geopolymer, a cementitious material that is synthesized from industrial waste or natural minerals, and nanoparticles, which are added to improve the mechanical, thermal, and electrical properties of the resulting material [179].
There has been significant research into the sustainability of geopolymer nanocomposites, with many studies focusing on their environmental impact and long-term durability. One key advantage of geopolymer nanocomposites is their low carbon footprint, as they can be produced using industrial waste materials such as fly ash, blast furnace slag, and metakaolin. This reduces the amount of waste sent to landfills and decreases the need for traditional Portland cement production, which is responsible for a significant amount of global carbon emissions [179,180].
In addition to their sustainability, geopolymer nanocomposites also offer several technical advantages over traditional cement-based materials. They have been found to have excellent mechanical properties, including high compressive and flexural strength, as well as good resistance to fire and chemicals. Furthermore, they exhibit good thermal stability and can be used in high-temperature applications. Recent studies have also investigated the use of geopolymer nanocomposites in various engineering applications, including the construction of bridges, roads, and buildings. These studies have demonstrated the potential of these materials to provide sustainable and durable solutions in the built environment. Overall, the literature suggests that geopolymer nanocomposites offer a promising avenue for the development of sustainable composite materials. Ongoing research is focused on optimizing their properties and exploring new applications, with the aim of further reducing the environmental impact of the construction industry [181].
Analyzing the sustainable development goals, we may find that the geopolymer nanocomposites are coherent with all three main areas of this approach: environment, society, and economy [182,183]. The sustainable development approach is based on 17 goals that are presented in Figure 6.
Geopolymers belong to a group of rapidly developing materials. Research on geopolymers is performed while simultaneously paying attention to the lack of negative impact on the environment and considering sustainable development goals. These materials have the potential to reduce negative environmental impact due to their many positive features. Firstly, nanogeopolymer composites are made from natural materials such as volcanic ash, which is a waste material from power plants or cement factories, meaning they are less harmful to the environment than traditional building materials such as cement. Secondly, nanogeopolymer composites have a smaller environmental impact during production. Unlike cement production, which is associated with high carbon dioxide emissions, the production of nanogeopolymer composites is much more energy efficient and has a lower environmental impact. Thirdly, nanogeopolymer composites are more durable and resistant to weather conditions than traditional building materials. As a result, their lifespan increases, meaning there is less need for replacement, which translates to a smaller amount of construction waste. Finally, nanogeopolymer composites can be used to produce materials that are much lighter and smaller in size than building materials, which can contribute to a reduction in material and energy consumption during the construction process. In summary, nanogeopolymer composites are environmentally friendly building materials that have the potential to reduce negative environmental impacts compared to traditional building materials. Newly designed functional materials may in turn contribute to the growth of the industrial sector in which they are applied and thus to the overall economic growth. From an environmental point of view, the most significant feature of geopolymers is the low emission of greenhouse gases during production, including low demand on energy. The main benefits from this fact can be achieved through the large-scale application in the building industry as infrastructure projects. It is also worth mentioning that the fabrication of geopolymer-based concretes and cements produces significantly lower carbon dioxide emissions compared to the fabrication of Portland cement, which is undoubtedly favorable in terms of environmental protection and phenomena affecting climate change (including the greenhouse effect) [184,185,186,187,188,189].
However, given that there are many limitations in such applications, enhancing the geopolymer characteristics by nanoadditives could be a promising solution. Today, the building industry looks for smart solutions, such as self-condition monitoring, self-curing properties, energy storage, energy harvesting, etc. Some of them can be obtained by nano-components. For example, graphene–geopolymer composites show a piezoresistive effect, which can be used for self-condition monitoring of building materials. Furthermore, the addition of graphene pellets can also influence the energy-storage or energy-harvesting properties of geopolymers. The nanoparticles also allow for ‘self-cleaning’ properties. The addition of nano titanium oxide in construction materials, thanks to the photocatalyst process, helps to decompose a wide range of air pollutants and to remove harmful bacteria. In addition, this additive also produces one more desirable sustainable effect—improving the air quality in urban areas [179,180,181].
It is worth noting that the mentioned properties of geopolymer nanocomposites are also connected with the area of economy [190,191] and goals connected with sustainable cities as well as industry and infrastructure [182,183]. Research shows that geopolymer nanocomposite not only have better mechanical properties, but first of all better durability [189,192]. For example, nano titanium dioxide decreases carbonation depth [192] and raises chloride and sulfate resistance through the formation of hydrates and the filling effect [193]. In turn, nanosilica significantly attenuates water absorption [194] and significantly enhances the material resistance to acid environments and limiting surface deterioration thanks to the decreased porosity and increased density of the geopolymer [195]. For infrastructure applications, particularly interesting are different forms of nanocarbon [196]. For example, carbon nanotubes improved structural and mechanical properties and increased resistance in sulfate attack [197,198]. Moreover, the proper design of the composites gives the possibility of self-condition monitoring, which can significantly decrease the cost of maintaining infrastructural composition that can be provided only on-demand (signal received from material) [199].
Firstly, due to the fact that nanocomposites are more durable and resistant to weather conditions than traditional building materials, they can significantly reduce costs associated with maintenance and repairs. As a result, property owners can save a significant amount of money in the long run. Secondly, the production of nanocomposites can be much more energy-efficient than the production of traditional building materials such as cement. This means that production costs can be lower, which can lead to lower costs for end consumers. Thirdly, nanocomposites can be used to produce materials that are lighter in weight and smaller in size than traditional building materials, which can help reduce transportation and handling costs during the construction process. In summary, nanocomposites have the potential to reduce costs in the construction industry by reducing maintenance and repair costs, lowering production and transportation costs, and reducing material and energy consumption during the construction process [200,201,202,203,204,205,206].
An important aspect of the economy is also the sustainable development goal associated with energy. Geopolymers themselves are well known as materials that allow for low energy consumption [174,207]. The usage of nanocomponents additionally strengthens these properties. Firstly, due to increasing the mechanical properties, a significantly lower amount can be used. Increasing the mechanical properties of a material has several benefits, one of which is that it allows for the use of a lower amount of the material while still achieving the desired level of performance. This can result in cost savings and can also be beneficial for the environment by reducing the amount of resources required to produce the material. Additionally, using a lower amount of material can also lead to a reduction in the amount of waste generated, further contributing to environmental sustainability. Therefore, improving the mechanical properties of materials can have wide-ranging benefits, both economic and environmental. In particular, a very good effect is obtained by joining different nanoparticles and fibers in geopolymer composites [194,208,209] as well as by combining nanoparticles with each other or with microparticles [210]. Furthermore, the addition of nanocomponents, such as silica carbon whiskers, improves the mechanical properties and toughness of geopolymers [174,211]. It results in the possibility of using a lower amount of material to obtain the same strength parameters for particular construction. The element that should also be considered in a case of materials is a possibility of its production from waste or renewable raw materials. This is a strong point of geopolymer nanocomposites. Among the most popular materials for the geopolymerization process are waste products from the energy industry such as fly ash and slags [212]. Moreover, among the possibilities considered in the last a few years are natural microfibers, such as cellulose nanofibrils or nanocrystalline cellulose [213]. This type of additive is more environmentally friendly than synthetic nanofibers, but should bring similar benefits.
The research and development of geopolymer materials is driven by the sustainability factor. Although replacing concrete on a large scale is far from implementation, geopolymer composites are increasingly being used in niche areas. Geopolymer nanocomposites are particularly interesting because of their advanced properties that are useful in many areas. They are coherent with all three main areas of sustainable development goals: environment, society, and economy. The fabrication of geopolymer materials is in line with responsible production, innovation, and waste management, and reduces the carbon footprint. Geopolymers emit low levels of greenhouse gases during production, making them favorable for environmental protection. The addition of nanoadditives enhances the characteristics of geopolymers and offers promising solutions to overcome the limitations of applications. Graphene–geopolymer composites show piezoresistive effects that can be used for self-condition monitoring of building materials, while nano titanium oxide helps to decompose air pollutants and improve air quality in urban areas. Geopolymer nanocomposites have better mechanical properties and durability, making them suitable for infrastructure and shielding applications. They can resist biocorrosion and algae and fungi formation, and they have self-healing properties. Therefore, geopolymer nanocomposites have a significant impact on sustainable cities, industry, and infrastructure [213,214,215,216,217,218,219,220,221,222,223].

5. Conclusions and Perspectives

The research direction in the field of polymers focuses on developing various approaches for their synthesis and modification in line with sustainable development goals. Geopolymer fabrication can use waste products, which is considered economically and environmentally friendly and in line with waste management and responsible production approaches. Studies are being performed to modify geopolymer matrices to enhance their mechanical properties or provide new properties such as magnetism or sorption. Nanomaterials are being increasingly used as potential modifying agents of geopolymers. Even a small amount (lower than 1.0% wt.) of nanomaterials added to the geopolymer matrix can significantly improve its functional properties. Nanomaterials can enhance mechanical properties such as compressive strength, flexural strength, and toughness, as well as affect characteristics such as permeability, water adsorption, porosity, or thermal properties. The combination of a geopolymer matrix with waste products and nano-sized materials can lead to the development of innovative functional materials and affect economic growth, especially in the construction industry.
Geopolymers have potential for sustainable development due to their low emission of greenhouse gases and low energy demand during production. The main conclusion drawn from these findings is that the use of geopolymer materials combined with waste products and nanomaterials has the potential to lead to the development of innovative and sustainable functional materials. This approach aligns with sustainable development goals by minimizing negative environmental impacts and promoting responsible waste management and production. The incorporation of nanomaterials into geopolymer matrices can significantly improve their mechanical and functional properties, making them a promising solution for the construction industry and other sectors. Additionally, geopolymer production is energy-efficient and emits low levels of greenhouse gases, further contributing to sustainable development.

Author Contributions

Conceptualization, A.D., S.K.-K. and K.K.; methodology, B.F.; software, A.D.; validation, S.K.-K.; formal analysis, K.K.; investigation, S.K.-K.; resources, B.F.; data curation, K.K.; writing—original draft preparation, A.D., S.K.-K., B.F. and K.K.; writing—review and editing, A.D., S.K.-K. and G.F.; visualization, A.D. and S.K.-K.; supervision, K.K. and G.F.; project administration, K.K.; funding acquisition, K.K. and G.F. All authors have read and agreed to the published version of the manuscript.

Funding

This research was supported by the project called the “Materials for circular economy—industrial waste based geopolymer composites with hybrid reinforcement” under the M-ERA.NET 3 program by the Polish National Centre for Research and Development, grant number M-ERA.NET3/2021/70/GEOSUMAT/2022 and by a grant of the Ministry of Research, Innovation and Digitization, CNCS/CCCDI-UEFISCDI, project number COFUND-M-ERANET-3-GEOSUMAT, no. 314/2022. The authors thank the COST Action CA21103 and CA21121 for COST meeting support.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The data that support the findings of this study are contained within the article.

Conflicts of Interest

The authors declare no conflict of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript; or in the decision to publish the results.

References

  1. Novotný, J.; Jaskevic, M.; Mamon, F.; Mareš, J.; Horký, R.; Houška, P. Manufacture and Characterization of Geopolymer Coatings Deposited from Suspensions on Aluminium Substrates. Coatings 2022, 12, 1695. [Google Scholar] [CrossRef]
  2. Cong, P.; Cheng, Y. Advances in geopolymer materials: A comprehensive review. J. Traffic Transp. Eng. 2021, 8, 283–314. [Google Scholar] [CrossRef]
  3. Singh, B.; Ishwarya, G.; Gupta, M.; Bhattacharyya, S.K. Geopolymer concrete: A review of some recent developments. Constr. Build. Mater. 2015, 85, 78–90. [Google Scholar] [CrossRef]
  4. Zhuang, X.Y.; Chen, L.; Komarneni, S.; Zhou, C.H.; Tong, D.S.; Yang, H.M.; Yu, W.H.; Wang, H. Fly ash-based geopolymer: Clean production, properties and applications. J. Clean. Prod. 2016, 125, 253–267. [Google Scholar] [CrossRef]
  5. Ren, B.; Zhao, Y.; Bai, H.; Kang, S.; Zhang, T.; Song, S. Eco-friendly geopolymer prepared from solid wastes: A critical review. Chemosphere 2021, 267, 128900. [Google Scholar] [CrossRef] [PubMed]
  6. Wang, S.; Liu, B.; Zhang, Q.; Wen, Q.; Lu, X.; Xiao, K.; Ekberg, C.; Zhang, S. Application of geopolymers for treatment of industrial solid waste containing heavy metals: State-of-the-art review. J. Clean. Prod. 2023, 390, 136053. [Google Scholar] [CrossRef]
  7. Grba, N.; Baldermann, A.; Dietzel, M. Novel green technology for wastewater treatment: Geo-material/geopolymer applications for heavy metal removal from aquatic media. Int. J. Sediment Res. 2023, 38, 33–48. [Google Scholar] [CrossRef]
  8. Zhang, X.; Zhou, X.; Moghaddam, T.B.; Zhang, F.; Otto, F. Synergistic effects of iron (Fe) and biochar on light-weight geopolymers when used in wastewater treatment applications. J. Clean. Prod. 2021, 322, 129033. [Google Scholar] [CrossRef]
  9. Aouan, B.; Alehyen, S.; Fadil, M.; El Alouani, M.; Saufi, H.; El Herradi, E.H.; El Makhoukhi, F.; Taibi, M. Development and optimization of geopolymer adsorbent for water treatment: Application of mixture design approach. J. Environ. Manag. 2023, 338, 117853. [Google Scholar] [CrossRef]
  10. Nawaz, M.; Heitor, A.; Sivakumar, M. Geopolymers in construction—Recent developments. Constr. Build. Mater. 2020, 260, 120472. [Google Scholar] [CrossRef]
  11. Freire, A.L.; José, H.J.; de Fátima Peralta Muniz Moreira, R. Potential applications for geopolymers in carbon capture and storage. Int. J. Greenh. Gas Control 2022, 118, 103687. [Google Scholar] [CrossRef]
  12. Wang, A.; Fang, Y.; Zhou, Y.; Wang, C.; Dong, B.; Chen, C. Green Protective Geopolymer Coatings: Interface Characterization, Modification and Life-Cycle Analysis. Materials 2022, 15, 3767. [Google Scholar] [CrossRef]
  13. Hamidi, R.M.; Siyal, A.A.; Luukkonen, T.; Shamsuddin, R.M.; Moniruzzaman, M. Fly ash geopolymer as a coating material for controlled-release fertilizer based on granulated urea. RSC Adv. 2022, 12, 33187–33199. [Google Scholar] [CrossRef]
  14. Ricciotti, L.; Apicella, A.; Perrotta, V.; Aversa, R. Geopolymer Materials for Bone Tissue Applications: Recent Advances and Future Perspectives. Polymers 2023, 15, 1087. [Google Scholar] [CrossRef]
  15. Forsgren, J.; Pedersen, C.; Strømme, M.; Engqvist, H. Synthetic geopolymers for controlled delivery of oxycodone: Adjustable and nanostructured porosity enables tunable and sustained drug release. PLoS ONE 2011, 6, e17759. [Google Scholar] [CrossRef]
  16. Titirici, M.M.; White, R.J. Geopolymers: A paradigm shift in sustainable chemistry. Chem. Soc. Rev. 2021, 50, 5836–5858. [Google Scholar]
  17. Zhang, C.; Khorshidi, H.; Najafi, E.; Ghasemi, M. Fresh, mechanical and microstructural properties of alkali-activated composites incorporating nanomaterials: A comprehensive review. J. Clean. Prod. 2023, 384, 135390. [Google Scholar] [CrossRef]
  18. Xie, T.; Fang, C. Nanomaterials Applied in Modifications of Geopolymer Composites: A Review. Aust. J. Civ. Eng. 2019, 17, 32–49. [Google Scholar] [CrossRef]
  19. Huseien, G.F.; Hamzah, H.K.; Sam, A.R.M.; Khalid, N.H.A.; Shah, K.W.; Deogrescu, D.P.; Mirza, J. Alkali-activated mortars blended with glass bottle waste nano powder: Environmental benefit and sustainability. J. Clean. Prod. 2020, 243, 118636. [Google Scholar] [CrossRef]
  20. Faheem, M.T.M.; Abdullah, M.M.a.; Hussin, K.; Binhussain, M.; Ghazali, C.M.R.; Izzat, A. Application of Clay-Based Geopolymer in Brick Production: A Review. Adv. Mater. Res. 2013, 626, 878–882. [Google Scholar] [CrossRef]
  21. Zhang, P.; Li, Q.; Wang, J.; Shi, Y.; Ling, Y. Effect of PVA fiber on durability of cementitious composite containing nano-SiO2. Nanotechnol. Rev. 2019, 8, 116–127. [Google Scholar] [CrossRef]
  22. Zhang, P.; Ling, Y.; Wang, J.; Shi, Y. Bending resistance of PVA fiber reinforced cementitious composites containing nano-SiO2. Nanotechnol. Rev. 2019, 8, 690–698. [Google Scholar] [CrossRef]
  23. Tay, C.H.; Mazlan, N.; Wayayok, A.; Basri, M.S.; Mustafa, M.; Abdullah, A. Nanocellulose reinforced zeolite based geopolymer concrete: Density analysis through response surface methodology. Mater. Today Proc. 2022, 66, 2873–2882. [Google Scholar] [CrossRef]
  24. Rahmawati, C.; Aprilia, S.; Saidi, T.; Aulia, T.B. Current development of geopolymer cement with nanosilica and cellulose nanocrystals. J. Phys. Conf. Ser. 2021, 1783, 12056. [Google Scholar] [CrossRef]
  25. Sudalaimani, K.K.; Vijayakumar, C.T.; Saravanakumar, S.S. Effect of bio-additives on physico-chemical properties of fly ash-ground granulated blast furnace slag based self-cured geopolymer mortars. J. Hazard. Mater. 2019, 361, 56–63. [Google Scholar]
  26. Shaikh, F.U.A.; Hosan, A. Effect of Nano Alumina on Compressive Strength and Microstructure of High Volume Slag and Slag-Fly Ash Blended Pastes. Front. Mater. 2019, 6, 90. [Google Scholar] [CrossRef]
  27. Chougan, M.; Ghaffar, S.H.; Jahanzat, M.; Albar, A.; Mujaddedi, N.; Swash, R. The influence of nano-additives in strengthening mechanical performance of 3D printed multi-binder geopolymer composites. Constr. Build. Mater. 2020, 250, 118928. [Google Scholar] [CrossRef]
  28. Alomayri, T. Performance evaluation of basalt fiber-reinforced geopolymer composites with various contents of nano CaCO3. Ceram. Int. 2021, 47, 29949–29959. [Google Scholar] [CrossRef]
  29. Muhammad, Y.K.; Ans, A.R.; Zia, U.A.; Waqas, A.; Hassan, A. Recent advances in nanocellulose-based different biomaterials: Types, properties, and emerging applications. J. Mater. Res. Technol. 2021, 14, 2601–2623. [Google Scholar]
  30. Guo, X.; Shi, H. Durability and pore structure of nano-particle-modified geopolymers of waste brick powder-class C fly ash. Chin. J. Mater. Res. 2017, 31, 110–116. [Google Scholar]
  31. Wang, J.B.; Zhou, T.T.; Xu, D.Y.; Zhou, Z.H.; Du, P.; Xie, N.; Cheng, X.; Liu, Y. Effect of nano-silica on the efflorescence of waste based alkali-activated inorganic binder. Constr. Build. Mater. 2018, 167, 381–390. [Google Scholar] [CrossRef]
  32. Roopchund, R.; Andrew, J.; Sithole, B. Using cellulose nanocrystals to improve the mechanical properties of fly ash-based geopolymer construction materials. Eng. Sci. Technol. Int. 2022, 25, 100989. [Google Scholar] [CrossRef]
  33. Zhang, C.; Zhao, J.; Sun, X.; Chen, H.; Yu, T.; Yu, T.B. The synergistic effect of nano Y2O3/CeO2 and nano Al2O3/SiO2 on the properties of vitrified bond and vitrified bond CBN composites. Ceram. Int. 2020, 46, 14224–14231. [Google Scholar] [CrossRef]
  34. Reddy, N.A.K.; Ramujee, K. Comparative study on mechanical properties of fly ash & GGBFS based geopolymer concrete and OPC concrete using nano-alumina. Mater. Today Proc. 2022, 60, 399–404. [Google Scholar]
  35. Xavier, C.S.B.; Rahim, A. Nano aluminium oxide geopolymer concrete: An experimental study. Mater. Today Proc. 2022, 56, 1643–1647. [Google Scholar] [CrossRef]
  36. Korniejenko, K.; Figiela, B.; Miernik, K.; Ziejewska, C.; Marczyk, J.; Hebda, M.; Cheng, A.; Lin, W.-T. Mechanical and Fracture Properties of Long Fiber Reinforced Geopolymer Composites. Materials 2021, 14, 5183. [Google Scholar] [CrossRef] [PubMed]
  37. Deb, P.S.; Sarker, P.K.; Barbhuiya, S. Effects of nano-silica on the strength development of geopolymer cured at room temperature. Constr. Build. Mater. 2015, 101, 675–683. [Google Scholar] [CrossRef]
  38. Zidi, Z.; Ltifi, M.; Zafar, I. Synthesis and attributes of nano-SiO2 local metakaolin based-geopolymer. J. Build. Eng. 2021, 33, 101586. [Google Scholar] [CrossRef]
  39. Xu, S.L.; Malik, M.A.; Qi, Z.; Huang, B.T.; Li, Q.H.; Sarkar, M. Influence of the PVA fibers and SiO2 NPs on the structural properties of fly ash based sustainable geopolymer. Constr. Build. Mater. 2018, 164, 238–245. [Google Scholar] [CrossRef]
  40. Phoo-ngernkham, T.; Chindaprasirt, P.; Sata, V.; Hanjitsuwan, S.; Hatanaka, S. The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured at ambient temperature. Mater Des. 2014, 55, 58–65. [Google Scholar] [CrossRef]
  41. Durak, U.; Karahan, O.; Uzal, B.; İlkentapar, S.; Atiş, C.D. Influence of nano SiO2 and nano CaCO3 particles on strength, workability, and microstructural properties of fly ash-based geopolymer. Struct. Concr. 2021, 22, 352–367. [Google Scholar] [CrossRef]
  42. Meng, T.; Ahmed, S.; Dai, D.; Yu, Y. Effects of load types and critical molar ratios on strength properties and geopolymerization mechanism. Rev. Adv. Mater. Sci. 2021, 60, 216–222. [Google Scholar] [CrossRef]
  43. Liu, X.; Peng, Z.; Pan, C.; Hu, X.; Wan, C.; Yang, H. Mechanical properties and microscopic analysis of nano-silica modified fly ash geopolymer. Mater. Rev. 2020, 34, 22078–22082. [Google Scholar]
  44. Marczyk, J.; Ziejewska, C.; Korniejenko, K.; Łach, M.; Marzec, W.; Góra, M.; Dziura, P.; Sprince, A.; Szechyńska-Hebda, M.; Hebda, M. Properties of 3D Printed Concrete–Geopolymer Hybrids Reinforced with Aramid Roving. Materials 2022, 15, 6132. [Google Scholar] [CrossRef] [PubMed]
  45. Singh, N.B.; Saxena, S.K.; Kumar, M. Effect of nanomaterials on the properties of geopolymer mortars and concrete. Mater. Today Proc. 2018, 5, 9035–9040. [Google Scholar] [CrossRef]
  46. Fatih, K.; İbrahim, T.; Enes, E. Improving elevated temperature performance of geopolymer concrete utilizing nano-silica, micro-silica and styrene-butadiene latex. Constr. Build. Mater. 2021, 286, 122980. [Google Scholar]
  47. Shaise, K.J.; Yashida, N.; Alessio, C.M.; Muhammed, A.; Girija, K. Effect of addition of nanoclay and SBR latex on fly ash-slag geopolymer mortar. J. Build. Eng. 2023, 66, 105875. [Google Scholar]
  48. Duxson, P.; Provis, J.L.; Lukey, G.C.; van Deventer, J.S. The role of inorganic polymer technology in the development of green concrete. Cem. Concr. Res. 2007, 37, 1590–1597. [Google Scholar] [CrossRef]
  49. Provis, J.L.; Duxson, P.; van Deventer, J.S. The role of alkali-activated materials in sustainable construction. Mater. Today 2011, 14, 394–401. [Google Scholar]
  50. Zhu, W.; Wang, Q.; Zhang, Y.; Chen, D. Carbon nanotube reinforced geopolymer composites: A review. Mater. Des. 2015, 65, 653–678. [Google Scholar]
  51. Tang, W.; Lu, X.; Qi, T. Preparation and characterization of carbon nanotube/Geopolymer nanocomposites with high mechanical properties. Ceram. Int. 2019, 45, 24858–24863. [Google Scholar]
  52. Rovnaníková, P.; Kovářík, T. Structural characterization of carbon nanotubes and carbon nanotube-reinforced geopolymer composite. J. Mater. Sci. 2021, 56, 4694–4712. [Google Scholar]
  53. Li, X.; Li, Y.; Chen, J.; Chen, Y. Mechanical and electrical properties of carbon nanotube/geopolymer nanocomposites. J. Mater. Sci. 2018, 53, 7536–7547. [Google Scholar]
  54. Wang, L.; Li, Z.; Zhang, C. Preparation and characterization of carbon nanotube reinforced geopolymer nanocomposites with enhanced mechanical and thermal properties. Materials 2019, 225, 450–461. [Google Scholar]
  55. Wang, Y.; Chen, C.; Zhao, Z.; Zhang, L.; Li, Y. Synthesis and properties of carbon nanotube reinforced geopolymer composites. J. Mater. Sci. 2018, 53, 13461–13475. [Google Scholar]
  56. Wang, X.; Yang, X.; Hu, S.; Feng, D. Carbon nanotube-reinforced geopolymer composites for high-temperature applications: A review. Compos. B Eng. 2020, 183, 107658. [Google Scholar]
  57. Qian, X.; Lu, L.; Yan, H.; Huang, Y. Enhanced mechanical and thermal properties of carbon nanotube-geopolymer composite by pre-treatment. Constr. Build. Mater. 2019, 206, 468–477. [Google Scholar]
  58. Liu, Y.; Chen, Z.; Zhu, M.; Lu, C.; Chen, G.; Huang, X. Preparation and properties of carbon nanotube/geopolymer nanocomposites. J. Alloys Compd. 2020, 816, 152559. [Google Scholar]
  59. Wang, L.; Li, Z.; Zhang, C. Thermal and electrical properties of carbon nanotube reinforced geopolymer nanocomposites. Constr. Build. Mater. 2020, 234, 117409. [Google Scholar]
  60. Yang, Y.; Song, L.; Chen, F. Preparation and properties of carbon nanotube-geopolymer composites for energy storage applications. J. Mater. Sci. 2019, 54, 9341–9354. [Google Scholar]
  61. Davidovits, J. Geopolymers: Inorganic polymeric new materials. J. Therm. Anal. 1991, 37, 1633–1656. [Google Scholar] [CrossRef]
  62. Zhu, W.; Huang, L.; Wang, X.; Yao, Q.; Wang, D. In-situ and ex-situ approaches to graphene-reinforced geopolymer composites: A review. Compos. B Eng. 2017, 15, 223–231. [Google Scholar]
  63. Duan, P.; Liu, J.; Li, W.; Yu, Q.; Lu, Z. Mechanical properties of graphene/geopolymer nanocomposites: A review. Compos. B Eng. 2019, 175, 107032. [Google Scholar]
  64. Abdollahnejad, Z.; Rafiee, M.A. Graphene-geopolymer nanocomposites: A review. J. Mater. Sci. 2018, 53, 12081–12101. [Google Scholar]
  65. Kriegel, R.; Ferrari, A.; Nistico, R. The influence of graphene and graphene oxide on the properties of geopolymer composites. Materials 2017, 10, 1440. [Google Scholar]
  66. Singh, D.; Singh, N.B.; Singh, M. Geopolymer/graphene oxide nanocomposites: A review. Mater. Sci. Energy Technol. 2021, 4, 1–12. [Google Scholar]
  67. Della, V.P.; Kyzas, G.Z.; Ochando-Pulido, J.M. Green synthesis of graphene oxide/alginate composite for highly efficient removal of copper ions. J. Clean. Prod. 2016, 113, 553–560. [Google Scholar]
  68. Kong, L.; Chen, J.; Lu, J. Geopolymer reinforced with graphene oxide–phosphate glass composite fibres. Compos. Part A Appl. 2018, 109, 188–195. [Google Scholar]
  69. Alam, M.S.; Islam, M.R. Influence of graphene oxide on the properties of geopolymer composites. J. Mater. Sci. Res. 2017, 6, 39–50. [Google Scholar]
  70. Liu, J.; Duan, P.; Yu, Q.; Li, W.; Lu, Z. Preparation and properties of graphene oxide–geopolymer nanocomposites: A review. Adv. Appl. Ceram. 2021, 120, 294–309. [Google Scholar]
  71. Sanjuán, M.Á.; Sanjuán, M.Á.; Martinez-Ramirez, S.; Garcia-Lodeiro, I.; Palomo, A. Graphene oxide geopolymer composites with advanced properties. Nanomaterials 2019, 9, 1011. [Google Scholar]
  72. Zuo, X.; Zuo, X.; Li, W.; Li, M.; Li, Z.; Wang, H.; Ding, J.; Chen, Y. A review of graphene-based geopolymers: Synthesis, properties and applications. Adv. Appl. Ceram. 2020, 119, 1–20. [Google Scholar]
  73. Eftekhari, Y.; Eftekhari, Y.; Shirvani, M.; Javidi, M.; Zargar, M. Graphene oxide/epoxy/geopolymer ternary nanocomposite coating for protection of steel in corrosive environments. J. Mater. Sci. 2018, 53, 8647–8663. [Google Scholar]
  74. Jia, D.; Jia, D.; Chen, Y.; Li, Y.; Wang, Y.; Ye, Q.; Zhang, Y.; Song, X. Geopolymer composite with graphene oxide: Properties and microstructure. J. Alloys Compd. 2018, 746, 327–334. [Google Scholar]
  75. Pacheco-Torgal, F.; Jalali, S. Nanotechnology: Advantages and drawbacks in the field of construction and building materials. Constr. Build. Mater. 2011, 25, 582–590. [Google Scholar] [CrossRef]
  76. Duxson, P.; Fernández-Jiménez, A.; Provis, J.L.; Lukey, G.C.; van Deventer, J.S. Geopolymer technology: The current state of the art. J. Mater. Sci. 2007, 42, 2917–2933. [Google Scholar] [CrossRef]
  77. Provis, J.L.; van Deventer, J.S. Geopolymers: Structures, Processing, Properties and Industrial Applications; Woodhead Publishing: Sawston, UK, 2009; pp. 1–484. [Google Scholar]
  78. Palomo, A.; Grutzeck, M.W.; Blanco, M.T. Alkali-activated fly ashes: A cement for the future. Cem. Concr. Res. 1999, 29, 1323–1329. [Google Scholar] [CrossRef]
  79. Wong, L.S. Durability Performance of Geopolymer Concrete: A Review. Polymers 2022, 14, 868. [Google Scholar] [CrossRef]
  80. Morsy, M.S.; Alsayed, S.H.; Abd Elaleem, H.; Elchalakani, M. Recent trends in geopolymer concrete: A review. Constr. Build. Mater. 2020, 231, 117174. [Google Scholar]
  81. Zainudin, N.H.; Razak, R.A.; Jamaludin, S.B. A review on recent progress in geopolymer nanocomposites. J. Nanomater. 2019, 27, 650–673. [Google Scholar]
  82. Li, H.; Xiao, J.; Ou, J.; Wang, D. Microstructure of geopolymer prepared from circulating fluidized bed combustion (CFBC) bottom ashes. J. Cent. South Univ. Technol. 2005, 12, 769–773. [Google Scholar]
  83. Zhang, Z.; Liu, Y.; Chen, Q.; Zhang, L.; Lu, C. Enhancing the properties of fly ash-based geopolymer by adding nanoclay. J. Build. Eng. 2019, 25, 100764. [Google Scholar]
  84. Zhang, Z.; Liu, Y.; Chen, Q.; Zhang, L.; Lu, C. Properties and microstructure of geopolymer composite modified by hybrid reinforcement of basalt fiber and nanoclay. Constr. Build. Mater. 2018, 189, 525–533. [Google Scholar] [CrossRef]
  85. Salehi, S.; Shekarchi, M. Effects of nanoclay on mechanical properties of geopolymer composites containing microcrystalline cellulose. Constr. Build. Mater. 2019, 201, 447–454. [Google Scholar]
  86. Nath, P.; Kumari, A. Synthesis and characterization of geopolymer-based nanocomposite reinforced with modified montmorillonite. J. Build. Eng. 2019, 21, 141–148. [Google Scholar]
  87. Zhang, M.; Ruan, C.; Liu, Q.; Yang, X. Magnetic properties of CoFe2O4 nanoparticles prepared by sol-gel method. J. Magn. Magn. Mater. 2016, 416, 76–81. [Google Scholar]
  88. Zhang, Y.; Li, J. Review of magnetic nanoparticles preparation techniques and their applications in biomedicine. J. Nanomater. 2017, 26, 521–537. [Google Scholar]
  89. Yang, K.; Xu, H.; Cheng, Y.; Zhang, X. Magnetic nanoparticles for enhanced drug delivery in cancer therapy. Curr. Drug Metab. 2017, 18, 447–456. [Google Scholar]
  90. Wu, M.; Gu, Y.; Yu, C.; Fu, J. Magnetic nanoparticle-based drug/gene delivery systems. Chem. Rev. 2017, 117, 8388–8462. [Google Scholar]
  91. Hossain, S.; Bose, S.; Cho, J.; Choi, H. Nano/micro hybrid composites: Synthesis, properties and applications. RSC Adv. 2017, 7, 27440–27461. [Google Scholar]
  92. Yildirim, O.; Al-Sayah, M.H.; Kitis, M. Magnetic nanoparticle-based advanced nanocomposites for environmental remediation applications: A review. J. Environ. Chem. Eng. 2017, 5, 5737–5763. [Google Scholar]
  93. Wang, S.; Chen, H.; Yu, H.; Sun, H. Magnetic nanocomposites for environmental remediation. J. Hazard. Mater. 2015, 283, 329–343. [Google Scholar]
  94. Muflikhun, M.; Fitriana, N.; Widayatno, W.B. Recent advances in magnetic nanocomposites for environmental remediation: A review. J. Environ. Chem. Eng. 2020, 8, 103763. [Google Scholar]
  95. Ghasemzadeh, K.; Shojaei, A.F.; Yazdani, B.; Motamedi, H. Synthesis and Characterization of Geopolymer Composites Reinforced with Nano-SiC Particles. J. Inorg. Organomet. Polym. Mater. 2019, 29, 1397–1407. [Google Scholar]
  96. Chakraborty, S.; Sahoo, P.; Roy, A. Geopolymer nanocomposites: A review of recent developments. J. Mater. Sci. 2021, 56, 2485–2511. [Google Scholar]
  97. Tao, F.; Li, Z.; Zhang, J.; Liu, H. A review of the recent progress in synthesis, properties, and applications of magnetic geopolymer composites. Prog. Mater. Sci. 2020, 109, 100616. [Google Scholar]
  98. Zhang, Z.; Yao, X.; Liu, J. Geopolymer: A review of the synthesis methods, properties and applications. Mater. Sci. Eng. B 2018, 236, 114–126. [Google Scholar]
  99. Kumar, A.; Kumar, P.; Singh, R.K. Geopolymer Nanocomposites and Its Applications. Nanomaterials 2020, 52, 197–223. [Google Scholar]
  100. Palomo, A.; Krivenko, P.; Garcia-Lodeiro, I.; Kavalerova, E. Geopolymers based on natural resources: Fly ash. Procedia Mater. Sci. 2014, 4, 114–123. [Google Scholar]
  101. Bernal, S.A.; Provis, J.L.; Rose, V.; van Deventer, J.S. Progress in understanding alkali-activated materials. Cem. Concr. Res. 2013, 78, 110–125. [Google Scholar]
  102. Tchakouté, H.K.; Elimbi, A.; Djangang, C.N.; Kamseu, E.; Leonelli, C. Assessment of the pozzolanic activity of kaolin waste for the production of geopolymer cements. Appl. Clay Sci. 2014, 97, 245–250. [Google Scholar]
  103. Zhou, Y.; Ye, G.; Zhang, Y.; Wang, D. The role of alkali concentration in the formation of TiO2-geopolymer nanocomposites with enhanced mechanical properties. Mater. Sci. Eng. A 2018, 731, 444–452. [Google Scholar]
  104. Yip, C.K.; Lukey, G.C.; Provis, J.L.; van Deventer, J.S. Effect of calcium silicate sources on geopolymerisation. Cem. Concr. Res. 2008, 38, 554–564. [Google Scholar] [CrossRef]
  105. Li, C.; Li, L.; Li, J.; Li, J.; Wang, H. Preparation and properties of geopolymer composites reinforced by Al2O3 and TiO2. J. Aust. Ceram. 2020, 56, 301–307. [Google Scholar]
  106. Xu, H.; Zhu, Y.; Zhang, H.; Gao, X.; Shu, X. Development of a novel TiO2-geopolymer photocatalyst for degradation of organic pollutants. J. Environ. Chem. Eng. 2020, 8, 104236. [Google Scholar]
  107. Provis, J.L.; Duxson, P.; van Deventer, J.S.J. The role of particle technology in developing sustainable construction materials. Adv. Powder Technol. 2009, 20, 387–394. [Google Scholar] [CrossRef]
  108. Xu, H.; van Deventer, J.S.J. The geopolymerisation of alumino-silicate minerals. Int. J. Miner. Process. 2000, 59, 247–266. [Google Scholar] [CrossRef]
  109. Zhang, Z.; Provis, J.L.; Reid, A.; Wang, H.; Li, H. Geopolymers for immobilization of Cr(VI)-contaminated soil: Immobilization efficiency and leaching behavior. Environ. Sci. Technol. 2012, 46, 12224–12232. [Google Scholar]
  110. Nematollahi, B.; Sanjayan, J.G.; Shaikh, F.U.A. Effects of nano-silica addition on properties of geopolymers cured in ambient condition. Constr. Build. Mater. 2014, 50, 231–239. [Google Scholar]
  111. Provis, J.L.; Bernal, S.A.; Duxson, P.; van Deventer, J.S.J. Geopolymers as precursors to strengthened and stabilized mining waste. J. Hazard. Mater. 2009, 162, 1319–1327. [Google Scholar]
  112. Bernal, S.A.; Provis, J.L.; Walkley, B.; San Nicolas, R.; Gehman, J.D.; Brice, D.G.; Kilcullen, A.R.; Duxson, P.; van Deventer, J.S.J. Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation. Cem. Concr. Res. 2012, 42, 432–444. [Google Scholar] [CrossRef]
  113. Gharzouni, A.; Damidot, D.; Jauberthie, R.; Benhassaine, A.; Qiao, Y. Influence of silica fume on the properties of fly ash-based geopolymer concrete. Constr. Build. Mater. 2012, 27, 241–245. [Google Scholar]
  114. Wu, C.; Zhang, Y.; Zeng, J.; Lu, J.; Chen, Z.; Zhang, Y. Preparation and properties of inorganic polymer concrete modified with nano-SiO2. Mater. Des. 2013, 47, 720–726. [Google Scholar]
  115. Li, Y.; Li, W.; Yu, Q.; Li, W.; Zhang, J. Effect of nanosilica on the properties of fly ash-based geopolymer. Constr. Build. Mater. 2012, 29, 548–554. [Google Scholar] [CrossRef]
  116. Chindaprasirt, P.; Rattanasak, U.; Sirivivatnanon, V. Influence of fly ash fineness on the chloride penetration of concrete. Constr. Build. Mater. 2007, 21, 356–361. [Google Scholar] [CrossRef]
  117. Rovnaník, P.; Šimonová, H.; Topolá, L.; Schmid, P.; Keršner, Z. Effect of carbon nanotubes on the mechanical fracture properties of fly ash geopolymer. Procedia Eng. 2016, 151, 321–328. [Google Scholar] [CrossRef]
  118. Azeem, M.; Junaid, M.T.; Saleem, M.A. Correlated strength enhancement mechanisms in carbon nanotube based geopolymer and OPC binders. Constr. Build. Mater. 2021, 305, 124748. [Google Scholar] [CrossRef]
  119. Oualit, M.; Irekti, A. Mechanical performance of metakaolin-based geopolymer mortar blended with multi-walled carbon nanotubes. Ceram. Int. 2022, 48, 16188–16195. [Google Scholar] [CrossRef]
  120. Abbasi, S.M.; Ahmadi, H.; Khalaj, G.; Ghasemi, B. Microstructure and mechanical properties of a metakaolinite-based geopolymer nanocomposite reinforced with carbon nanotubes. Ceram. Int. 2016, 42, 15171–15176. [Google Scholar] [CrossRef]
  121. Li, F.; Yang, Z.; Zheng, A.; Li, S. Properties of modified engineered geopolymer composites incorporating multi-walled carbon Nanotubes(MWCNTs) and granulated blast furnace Slag (GBFS). Ceram. Int. 2021, 47, 14244–14259. [Google Scholar] [CrossRef]
  122. Alvi, M.A.A.; Khalifeh, M.; Agonafir, M.B. Effect of nanoparticles on properties of geopolymers designed for well cementing applications. J. Pet. Sci. Eng. 2020, 191, 107128. [Google Scholar] [CrossRef]
  123. Saafi, M.; Andrew, K.; Tang, P.L.; McGhon, D.; Taylor, S.; Rahman, M.; Yang, S.; Zhou, X. Multifunctional properties of carbon nanotube/fly ash geopolymeric Nanocomposites. Constr. Build. Mater. 2013, 49, 46–55. [Google Scholar] [CrossRef]
  124. Yang, T.; Han, E.; Wang, X.; Wu, D. Surface decoration of polyimide fiber with carbon nanotubes and its application for mechanical enhancement of phosphoric acid-based geopolymers. Appl. Surf. Sci. 2017, 416, 200–212. [Google Scholar] [CrossRef]
  125. Li, F.; Liu, L.; Yang, Z.; Li, S. Physical and mechanical properties and micro characteristics of fly ash-based geopolymer paste incorporated with waste Granulated Blast Furnace Slag (GBFS) and functionalized Multi-Walled Carbon Nanotubes (MWCNTs). J. Hazard. Mater. 2021, 401, 123339. [Google Scholar] [CrossRef]
  126. Jittabuta, P.; Horpibulsuk, S. Physical and Microstructure Properties of Geopolymer Nanocomposite Reinforced with Carbon Nanotubes. Mater. Today Proc. 2019, 17, 1682–1692. [Google Scholar] [CrossRef]
  127. Kusak, I.; Lunaka, M.; Rovnanik, P. Electric conductivity changes in geopolymer samples with added carbon nanotubes. Procedia Eng. 2016, 151, 157–161. [Google Scholar] [CrossRef]
  128. Chen, J.; Akono, A.T. Influence of multi-walled carbon nanotubes on the fracture response and phase distribution of metakaolin-based potassium geopolymers. J. Mater. Sci. 2021, 56, 19403–19424. [Google Scholar] [CrossRef]
  129. Zhu, Y.; Qian, Y.; Zhang, L.; Bai, B.; Wang, X.; Li, J.; Bi, S.; Kong, L.; Liu, W.; Zhang, L. Enhanced thermal conductivity of geopolymer nanocomposites by incorporating interface engineered carbon nanotubes. Compos. Commun. 2021, 24, 100691. [Google Scholar] [CrossRef]
  130. Zhang, Y.J.; He, P.Y.; Zhang, Y.X.; Chen, H. A novel electroconductive graphene/fly ash-based geopolymer composite and its photocatalytic performance. Chem. Eng. J. 2018, 334, 2459–2466. [Google Scholar] [CrossRef]
  131. Zhang, Y.J.; Yang, M.Y.; Zhang, L.; Zhang, K.; Kang, L. A new graphene/geopolymer nanocomposite for degradation of dye wastewater. Integr. Ferroelectr. 2016, 171, 38–45. [Google Scholar] [CrossRef]
  132. Sajjad, U.; Sheikh, M.N.; Hadi, M.N.S. Experimental study of the effect of graphene on properties of ambient-cured slag and fly ash-based geopolymer paste and mortar. Constr. Build. Mater. 2021, 313, 125403. [Google Scholar] [CrossRef]
  133. Ranjbar, N.; Mehrali, M.; Mehrali, M.; Alengaram, U.J.; Jumaat, M.Z. Graphene nanoplatelet-fly ash based geopolymer composites. Cem. Concr. Res. 2015, 76, 222–231. [Google Scholar] [CrossRef]
  134. Lertcumfu, N.; Jaita, P.; Thammarong, S.; Lamkhao, S.; Tandorn, S.; Randorn, C.; Tunkasiri, T.; Rujijanagul, G. Influence of graphene oxide additive on physical, microstructure, adsorption, and photocatalytic properties of calcined kaolinite-based geopolymer ceramic composites. Colloids Surf. A Physicochem. Eng. Asp. 2020, 602, 125080. [Google Scholar] [CrossRef]
  135. Maglad, A.M.; Zaid, O.; Arbili, M.M.; Ascensão, G.; Șerbănoiu, A.A.; Grădinaru, C.M.; García, R.M.; Qaidi, S.M.A.; Althoey, F.; de Prado-Gil, J. A Study on the Properties of Geopolymer Concrete Modified with Nano Graphene Oxide. Buildings 2022, 12, 1066. [Google Scholar] [CrossRef]
  136. Bellum, R.R.; Muniraj, K.; Indukuri, C.S.R.; Madduru, S.R.C. Investigation on Performance Enhancement of Fly ash—GGBFS Based Graphene Geopolymer Concrete. J. Build. Eng. 2020, 32, 101659. [Google Scholar] [CrossRef]
  137. Amri, A.; Najib, A.A.; Olivia, M.; Altarawneh, M.; Syam, A.; Rahman, M.M.; Saputro, S.; Wahyuadi, J.; Jiang, Z.T. Physicochemical properties of geopolymer composites with DFT calculations of in-situ reduction of graphene oxide. Ceram. Int. 2021, 47, 13440–13445. [Google Scholar] [CrossRef]
  138. Liang, W.; Zhang, G. Effect of reduced graphene oxide on the early-age mechanical properties of geopolymer cement. Mater. Lett. 2020, 276, 128223. [Google Scholar] [CrossRef]
  139. Shao, S.; Ma, S.; He, P.; Jia, D.; Yang, H.; Duan, X.; Zhou, Y. In-situ reduced graphene oxide/geopolymer composites for efficient Cs+ immobilization. Open Ceram. 2021, 6, 100095. [Google Scholar] [CrossRef]
  140. Vishnu, N.; Kolli, R.; Ravella, D.P. Studies on Self-Compacting geopolymer concrete containing fly ash, GGBS, wollastonite and graphene oxide. Mater. Today Proc. 2021, 43, 2422–2427. [Google Scholar] [CrossRef]
  141. Yan, S.; He, P.; Jia, D.; Duan, X.; Yang, Z.; Wang, S.; Zhou, Y. Crystallization kinetics and microstructure evolution of reduced graphene oxide/geopolymer composites. J. Eur. Ceram. Soc. 2016, 36, 2601–2609. [Google Scholar] [CrossRef]
  142. Yan, S.; He, P.; Jia, D.; Yang, Z.; Duan, X.; Wang, S.; Zhou, Y. In situ fabrication and characterization of graphene/geopolymer composites. Ceram. Int. 2015, 41, 11242–11250. [Google Scholar] [CrossRef]
  143. Yan, S.; He, P.; Jia, D.; Yang, Z.; Duan, X.; Wang, S.; Zhou, Y. Effect of reduced graphene oxide content on the microstructure and mechanical properties of graphene–geopolymer nanocomposites. Ceram. Int. 2016, 42, 752–758. [Google Scholar] [CrossRef]
  144. Assaedi, H.; Shaikh, F.U.A.; Low, I.M. Effect of nano-clay on mechanical and thermal properties of geopolymer. J. Asian Ceram. Soc. 2016, 4, 19–28. [Google Scholar] [CrossRef]
  145. Ravitheja, A.; Kumar, N.L.N.K. A study on the effect of nano clay and GGBS on the strength properties of fly ash based geopolymers. Mater. Today Proc. 2019, 19, 273–276. [Google Scholar] [CrossRef]
  146. Hassaan, M.M.; Khater, H.M.; El-Mahllawy, M.S.; El Nagar, A.M. Production of geopolymer composites enhanced by nano-kaolin material. J. Adv. Ceram. 2015, 4, 245–252. [Google Scholar] [CrossRef]
  147. Panda, B.; Unluer, C.; Tan, M.J. Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing. Compos. B Eng. 2019, 176, 107290. [Google Scholar] [CrossRef]
  148. Al-husseiny, R.A.; Ebrahim, S.E. Synthesis of nano-magnetite and magnetite/synthetic geopolymer nano-porous composite for application as a novel adsorbent. Environ. Nanotechnol. Monit. Manag. 2022, 18, 100700. [Google Scholar] [CrossRef]
  149. Rossatto, D.L.; Netto, M.S.; Jahn, S.L.; Mallmann, E.S.; Dotto, G.L.; Foletto, E.L. Highly efficient adsorption performance of a novel magnetic geopolymer/Fe3O4 composite towards removal of aqueous acid green 16 dye. J. Environ. Chem. Eng. 2020, 8, 103804. [Google Scholar] [CrossRef]
  150. Khan, H.; Hussain, S.; Zahoor, R.; Arshad, M.; Umar, M.; Marwat, M.A.; Khan, A.; Khan, J.R.; Haleem, M.A. Novel modeling and optimization framework for Navy Blue adsorption onto eco-friendly magnetic geopolymer composite. Environ. Res. 2023, 216, 114346. [Google Scholar] [CrossRef]
  151. Silveira Maranhão, F.d.; Gomes, F.; Thode, S.; Das, D.B.; Pereira, E.; Lima, N.; Carvalho, F.; Aboelkheir, M.; Costa, V.; Pal, K. Oil Spill Sorber Based on Extrinsically Magnetizable Porous Geopolymer. Materials 2021, 14, 5641. [Google Scholar] [CrossRef]
  152. Maleki, A.; Hajizadeh, Z.; Sharifi, V.; Emdadi, Z. A green, porous and eco-friendly magnetic geopolymer adsorbent for heavy metals removal from aqueous solutions. J. Clean. Prod. 2019, 215, 1233–1245. [Google Scholar] [CrossRef]
  153. Maiti, M.; Sarkar, M.; Maiti, S.; Malik, M.A.; Xu, S. Modification of geopolymer with size controlled TiO2 nanoparticle for enhanced durability and catalytic dye degradation under UV light. J. Clean. Prod. 2020, 255, 120183. [Google Scholar] [CrossRef]
  154. Mohamed, H.; Deutou, J.G.N.; Kaze, C.R.; Moungam, L.M.B.; Kamseu, E.; Melo, U.C.; Leonelli, C. Mechanical and microstructural properties of geopolymer mortars from meta-halloysite: Effect of titanium dioxide TiO2 (anatase and rutile) content. SN Appl. Sci. 2020, 2, 1573. [Google Scholar] [CrossRef]
  155. Falah, M.; MacKenzie, K.J.D.; Knibbe, R.; Page, S.J.; Hanna, J.V. New composites of nanoparticle Cu (I) oxide and titania in a novel inorganic polymer (geopolymer) matrix for destruction of dyes and hazardous organic pollutants. J. Hazard. Mater. 2016, 318, 772–782. [Google Scholar] [CrossRef]
  156. Kantarcı, F.; Maras, M.M. Formulation of a novel nano TiO2-modified geopolymer grout for application in damaged beam-column joints. Constr. Build. Mater. 2022, 317, 125929. [Google Scholar] [CrossRef]
  157. Duan, P.; Yan, C.; Luo, W.; Zhou, W. Effects of adding nano-TiO2 on compressive strength, drying shrinkage, carbonation and microstructure of fluidized bed fly ash based geopolymer paste. Constr. Build Mater. 2016, 106, 115–125. [Google Scholar] [CrossRef]
  158. Khatib, K.; Lahmyed, L.; El Azhari, M. Synthesis, Characterization, and Application of Geopolymer/TiO2 Nanoparticles Composite for Efficient Removal of Cu(II) and Cd(II) Ions from Aqueous Media. Minerals 2022, 12, 1445. [Google Scholar] [CrossRef]
  159. Li, M.; Sun, J.; Li, L.; Meng, L.; Wang, S.; Wei, J.; Mao, J. Effect of nanosilica on fiber pullout behavior and mechanical properties of strain hardening ultra-high performance concrete. Constr. Build. Mater. 2023, 367, 130255. [Google Scholar] [CrossRef]
  160. Çevik, A.; Alzeebaree, R.; Humur, G.; Niş, A.; Gülşan, M.E. Effect of nano-silica on the chemical durability and mechanical performance of fly ash based geopolymer concrete. Ceram. Int. 2018, 44, 12253–12264. [Google Scholar] [CrossRef]
  161. Adak, D.; Sarkar, M.; Mandal, S. Structural performance of nano-silica modified fly-ash based geopolymer concrete. Constr. Build. Mater. 2017, 135, 430–439. [Google Scholar] [CrossRef]
  162. Luo, H.L.; Lin, D.F.; Chen, S.C. Improving the properties of geopolymer containing oil-contaminated clay, metakaolin, and blast furnace slag by applying nano-SiO2. Environ. Technol. 2017, 38, 1619–1628. [Google Scholar] [CrossRef] [PubMed]
  163. Rahmawati, C.; Aprilia, S.; Saidi, T.; Aulia, T.B.; Hadi, A.E. The Effects of Nanosilica on Mechanical Properties and Fracture Toughness of Geopolymer Cement. Polymers 2021, 13, 2178. [Google Scholar] [CrossRef] [PubMed]
  164. Jin, Q.; Zhang, P.; Wu, J.; Sha, D. Mechanical Properties of Nano-SiO2 Reinforced Geopolymer Concrete under the Coupling Effect of a Wet–Thermal and Chloride Salt Environment. Polymers 2022, 14, 2298. [Google Scholar] [CrossRef] [PubMed]
  165. Their, J.M.; Özakça, M. Developing geopolymer concrete by using cold-bonded fly ash aggregate, nano-silica, and steel fiber. Constr. Build. Mater. 2018, 180, 12–22. [Google Scholar] [CrossRef]
  166. Sainia, G.; Vattipallib, U. Assessing properties of alkali activated GGBS based self-compacting geopolymer concrete using nano-silica. Case Stud. Constr. Mater. 2020, 12, e00352. [Google Scholar] [CrossRef]
  167. Gomez-Zamorano, L.Y.; Vega-Cordero, E.; Struble, L. Composite geopolymers of metakaolin and geothermal nanosilica waste. Constr. Build. Mater. 2016, 115, 269–276. [Google Scholar] [CrossRef]
  168. Deb, P.S.; Sarker, P.K.; Barbhuiya, S. Sorptivity and acid resistance of ambient-cured geopolymer mortars containing nano-silica. Cem. Concr. Compos. 2016, 72, 235–245. [Google Scholar] [CrossRef]
  169. Cai, J.; Li, X. Thermoelectric properties of geopolymers with the addition of nano-silicon carbide (SiC) powder. Ceram. Int. 2021, 47, 19752–19759. [Google Scholar] [CrossRef]
  170. Assaedi, H.; Alomayri, T.; Kaze, C.R.; Jindal, B.B.; Subaer, S.; Shaikh, F.; Alraddadi, S. Characterization and properties of geopolymer nanocomposites with different contents of nano-CaCO3. Constr. Build. Mater. 2020, 252, 119137. [Google Scholar] [CrossRef]
  171. Nejad, F.M.; Tolouei, M.; Nazari, H.; Naderan, A. Effects of Calcium Carbonate Nanoparticles and Fly Ash on Mechanical and Permeability Properties of Concrete. Adv. Civ. Eng. Mater. 2018, 7, 651–668. [Google Scholar] [CrossRef]
  172. Zidi, Z.; Ltifi, M.; Ayadi, Z.B.; El Mir, L. Synthesis of nano-alumina and their effect on structure, mechanical and thermal properties of geopolymer. J. Asian Ceram. Soc. 2019, 7, 524–535. [Google Scholar] [CrossRef]
  173. Saukani, M.; Lisdawati, A.N.; Irawan, H.; Iqbal, R.M.; Nurjaya, D.M.; Astutiningsih, S. Effect of Nano-Zirconia Addition on Mechanical Properties of Metakaolin-Based Geopolymer. J. Compos. Sci. 2022, 6, 293. [Google Scholar] [CrossRef]
  174. Zidi, Z.; Ltifi, M.; Ayadi, Z.B.; EL Mir, L.; Nóvoa, X.R. Effect of nano-ZnO on mechanical and thermal properties of geopolymer. J. Asian Ceram. Soc. 2020, 8, 1–9. [Google Scholar] [CrossRef]
  175. De Silva, R.T.; Yu, L.; Wang, D.; Chen, X.; Liu, Y.; Zhang, Z. Carbon nanotube reinforced geopolymer composites: An experimental study on mechanical and electromagnetic interference shielding properties. J. Clean. Prod. 2018, 198, 661–670. [Google Scholar]
  176. Qian, Z.; Li, H.; Li, Y.; Chen, Y.; Chen, C.; Chen, X. Effect of SiO2 nanoparticles on the microstructure and mechanical properties of fly ash-based geopolymer. J. Mater. Sci. 2017, 52, 9172–9185. [Google Scholar]
  177. Li, Y.; Qian, Z.; Li, H.; Chen, Y.; Chen, C.; Chen, X. Effect of Al2O3 nanoparticles on the mechanical and thermal properties of fly ash-based geopolymer composites. Constr. Build. Mater. 2017, 154, 278–289. [Google Scholar]
  178. Ismail, I.; Kumar, S.; Bernal, S.A.; Provis, J.L.; van Deventer, J.S.J. Effects of nano-SiO2 on geopolymer cement properties: A review. Constr. Build. Mater. 2019, 229, 116969. [Google Scholar]
  179. Ahmed, H.U.; Mohammed, A.A.; Mohammed, A.S. The role of nanomaterials in geopolymer concrete composites: A state-of-the-art review. J. Build. Eng. 2022, 49, 104062. [Google Scholar] [CrossRef]
  180. Huang, T.; Sun, Z. Advances in multifunctional graphene-geopolymer composites. Constr. Build. Mater. 2021, 272, 121619. [Google Scholar] [CrossRef]
  181. Łach, M. Geopolymer Foams—Will They Ever Become a Viable Alternative to Popular Insulation Materials?—A Critical Opinion. Materials 2021, 14, 3568. [Google Scholar] [CrossRef]
  182. Matalkah, F.; Ababneh, A.; Aqel, R. Effects of nanomaterials on mechanical properties, durability characteristics and microstructural features of alkali-activated binders: A comprehensive review. Constr. Build. Mater. 2022, 336, 127545. [Google Scholar] [CrossRef]
  183. de Oliveira, C.T.; Andrade Oliveira, G.G. What Circular economy indicators really measure? An overview of circular economy principles and sustainable development goals. Resour. Conserv. Recycl. 2023, 190, 106850. [Google Scholar] [CrossRef]
  184. Bogers, M.; Biermann, F.; Kalfagianni, A.; Kim, R.E.; Treep, J.; de Vos, M.G. The impact of the Sustainable Development Goals on a network of 276 international organizations. Glob. Environ. Chang. 2022, 76, 102567. [Google Scholar] [CrossRef]
  185. Arora-Jonsson, S. The sustainable development goals: A universalist promise for the future. Futures 2023, 146, 103087. [Google Scholar] [CrossRef]
  186. Chola, R.K.V.; Parambil, F.O.; Panakkal, T.; Chelaveettil, B.M.; Kumari, P.; Peedikakkal, S.V. Clean technology for sustainable development by geopolymer materials. Phys. Sci. Rev. 2022, 7, 100445. [Google Scholar]
  187. Shehata, N.; Mohamed, O.A.; Sayed, E.T.; Abdelkareem, M.A.; Olabi, A.G. Geopolymer concrete as green building materials: Recent applications, sustainable development and circular economy potentials. Sci. Total Environ. 2022, 836, 155577. [Google Scholar] [CrossRef] [PubMed]
  188. Verma, M.; Dev, N.; Rahman, I.; Nigam, M.; Ahmed, M.; Mallick, J. Geopolymer Concrete: A Material for Sustainable Development in Indian Construction Industries. Crystals 2022, 12, 514. [Google Scholar] [CrossRef]
  189. Singh, N.B.; Middendorf, B. Geopolymers as an alternative to Portland cement: An overview. Constr. Build. Mater. 2020, 237, 117455. [Google Scholar] [CrossRef]
  190. Firdous, R.; Nikravan, M.; Mancke, R.; Vöge, C.; Stephan, D. Assessment of environmental, economic and technical performance of geopolymer concrete: A case study. J. Mater. Sci. 2022, 57, 18711–18725. [Google Scholar] [CrossRef]
  191. Akhtar, N.; Ahmad, T.; Husain, D.; Majdi, A.; Alam, T.; Husain, N.; Wayal, A.K.S. Ecological footprint and economic assessment of conventional and geopolymer concrete for sustainable construction. J. Clean. Prod. 2022, 380, 134910. [Google Scholar] [CrossRef]
  192. Yin, C.; Zhao, W.; Ye, J.; Muroki, M.; Pereira, P. Ecosystem carbon sequestration service supports the Sustainable Development Goals progress. J. Environ. Manag. 2023, 330, 117155. [Google Scholar] [CrossRef] [PubMed]
  193. Samuvel Raj, R.; Prince Arulraj, G.; Anand, N.; Kanagaraj, B.; Lubloy, E.; Naser, M.Z. Nanomaterials in geopolymer composites: A review. DIBE 2023, 13, 100114. [Google Scholar] [CrossRef]
  194. Sastry, K.G.K.; Sahitya, P.; Ravitheja, A. Influence of nano TiO2 on strength and durability properties of geopolymer concrete. Mater. Today Proc. 2021, 45, 1017–1025. [Google Scholar] [CrossRef]
  195. Chen, K.; Wu, D.; Chen, H.X.; Zhang, G.; Yao, R.; Pan, C.; Zhang, Z. Development of low-calcium fly ash-based geopolymer mortar using nanosilica and hybrid fibers. Ceram. Int. 2021, 47, 21791–21806. [Google Scholar] [CrossRef]
  196. Růžek, V.; Dostayeva, A.M.; Walter, J.; Grab, T.; Korniejenko, K. Carbon Fiber-Reinforced Geopolymer Composites: A Review. Fibers 2023, 11, 17. [Google Scholar] [CrossRef]
  197. Chintalapudi, K.; Rao Pannem, R.M. An intense review on the performance of Graphene Oxide and reduced Graphene Oxide in an admixed cement system. Constr. Build. Mater. 2020, 259, 120598. [Google Scholar] [CrossRef]
  198. Khater, H.M.; El-Nagar, A.M. Preparation of sustainable of eco-friendly MWCNT geopolymer composites with superior sulfate resistance. Adv. Compos. Hybrid Mater. 2020, 3, 375–389. [Google Scholar] [CrossRef]
  199. Saeed, A.; Najm, H.M.; Hassan, A.; Sabri, M.M.S.; Qaidi, S.; Mashaan, N.S.; Ansari, K. Properties and Applications of Geopolymer Composites: A Review Study of Mechanical and Microstructural Properties. Materials 2022, 15, 8250. [Google Scholar] [CrossRef]
  200. Su, Z.; Hou, W.; Sun, Z. Recent advances in carbon nanotube-geopolymer composite. Constr. Build. Mater. 2020, 252, 118940. [Google Scholar] [CrossRef]
  201. Bai, B.; Zhu, Y.; Niu, M.; Ding, E.; Bi, S.; Yin, M.; Liu, W.; Sun, L.; Zhang, L. Modulation of electromagnetic absorption and shielding properties of geopolymer nanocomposites by designing core–shell structure of carbon nanotubes. Ceram. Int. 2022, 48, 26098–26106. [Google Scholar] [CrossRef]
  202. Zhu, Y.; Bai, B.; Ding, E.; Bi, S.; Liu, W.; Zhang, L. Enhanced electromagnetic interference shielding performance of geopolymer nanocomposites by incorporating carbon nanotubes with controllable silica shell. Ceram. Int. 2022, 48, 11103–11110. [Google Scholar] [CrossRef]
  203. Kirthika, S.K.; Goel, G.; Matthews, A.; Goel, S. Review of the untapped potentials of antimicrobial materials in the construction sector. Prog. Mater. Sci. 2023, 133, 101065. [Google Scholar] [CrossRef]
  204. Adak, D.; Sarkar, M.; Maiti, M.; Tamang, A.; Mandal, S.; Chattopadhyay, B. Anti-microbial efficiency of nano silver–silica modified geopolymer mortar for eco-friendly green construction technology. RSC Adv. 2015, 5, 64037–64045. [Google Scholar] [CrossRef]
  205. Tuntachon, S.; Kamwilaisak, K.; Somdee, T.; Mongkoltanaruk, W.; Sata, V.; Boonserm, K.; Wongsa, A.; Chindaprasirt, P. Resistance to algae and fungi formation of high calcium fly ash geopolymer paste containing TiO2. J. Build. Eng. 2019, 25, 100817. [Google Scholar] [CrossRef]
  206. Abdalla, J.A.; Thomas, B.S.; Hawileh, R.A.; Yang, J.; Jindal, B.B.; Ariyachandra, E. Influence of nano-TiO2, nano-Fe2O3, nanoclay and nano-CaCO3 on the properties of cement/geopolymer concrete. Clean. Mater. 2022, 4, 100061. [Google Scholar] [CrossRef]
  207. de Koster, S.A.L.; Mors, R.M.; Nugteren, H.W.; Jonkers, H.M.; Meesters, G.M.H.; van Ommen, J.R. Geopolymer Coating of Bacteria-containing Granules for Use in Self-healing Concrete. Procedia Eng. 2015, 102, 475–484. [Google Scholar] [CrossRef]
  208. Mahmood, A.; Noman, M.T.; Pechočiaková, M.; Amor, N.; Petrů, M.; Abdelkader, M.; Militký, J.; Sozcu, S.; Hassan, S.Z.U. Geopolymers and Fiber-Reinforced Concrete Composites in Civil Engineering. Polymers 2021, 13, 2099. [Google Scholar] [CrossRef]
  209. Gao, Z.; Zhang, P.; Wang, J.; Wang, K.; Zhang, T. Interfacial properties of geopolymer mortar and concrete substrate: Effect of polyvinyl alcohol fiber and nano-SiO2 contents. Constr. Build. Mater. 2022, 315, 125735. [Google Scholar] [CrossRef]
  210. Intarabut, D.; Sukontasukkul, P.; Phoo-ngernkham, T.; Zhang, H.; Yoo, D.-Y.; Limkatanyu, S.; Chindaprasirt, P. Influence of Graphene Oxide Nanoparticles on Bond-Slip Reponses between Fiber and Geopolymer Mortar. Nanomaterials 2022, 12, 943. [Google Scholar] [CrossRef] [PubMed]
  211. Kotop, M.A.; El-Feky, M.S.; Alharbi, Y.R.; Abadel, A.A.; Binyahya, A.S. Engineering properties of geopolymer concrete incorporating hybrid nano-materials. Ain Shams Eng. J. 2021, 12, 3641–3647. [Google Scholar] [CrossRef]
  212. Rahman, A.S.; Jackson, R.; Radford, D.W. Improved toughness and delamination resistance in continuous fiber reinforced geopolymer composites via incorporation of nano-fillers. Cem. Concr. Compos. 2020, 108, 103496. [Google Scholar] [CrossRef]
  213. Sáez-Pérez, M.P.; Durán-Suárez, J.A.; Castro-Gomes, J. Improving the Behaviour of Green Concrete Geopolymers Using Different HEMP Preservation Conditions (Fresh and Wet). Minerals 2022, 12, 1530. [Google Scholar] [CrossRef]
  214. Jagaba, A.H.; Kutty, S.R.M.; Hayder, G.; Baloo, L.; Noor, A.; Yaro, N.S.A.; Saeed, A.A.H.; Lawal, I.M.; Birniwa, A.H.; Usman, A.K. A Systematic Literature Review on Waste-to-Resource Potential of Palm Oil Clinker for Sustainable Engineering and Environmental Applications. Materials 2021, 14, 4456. [Google Scholar] [CrossRef] [PubMed]
  215. Korniejenko, K.; Pławecka, K.; Kozub, B. An Overview for Modern Energy-Efficient Solutions for Lunar and Martian Habitats Made Based on Geopolymers Composites and 3D Printing Technology. Energies 2022, 15, 9322. [Google Scholar] [CrossRef]
  216. Shakor, P.; Chu, S.H.; Puzatova, A.; Dini, E. Review of binder jetting 3D printing in the construction industry. Prog. Addit. Manuf. 2022, 7, 643–669. [Google Scholar] [CrossRef]
  217. Lazorenko, G.; Kasprzhitskii, A. Geopolymer additive manufacturing: A review. Addit. Manuf. 2022, 55, 102782. [Google Scholar] [CrossRef]
  218. Zhong, J.; Zhou, G.-X.; He, P.-G.; Yang, Z.-H.; Jia, D.-C. 3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide. Carbon 2017, 117, 421–426. [Google Scholar] [CrossRef]
  219. Zhou, G.-X.; Li, C.; Zhao, Z.; Qi, Y.-Z.; Yang, Z.-H.; Jia, D.-C.; Zhong, J.; Zhou, Y. 3D printing geopolymer nanocomposites structure: Graphene oxide size effects on a reactive matrix. Carbon 2020, 164, 215–223. [Google Scholar] [CrossRef]
  220. Imtiaz, L.; Rehman, S.K.U.; Ali Memon, S.; Khizar Khan, M.; Faisal Javed, M. A Review of Recent Developments and Advances in Eco-Friendly Geopolymer Concrete. Appl. Sci. 2020, 10, 7838. [Google Scholar] [CrossRef]
  221. Luhar, I.; Luhar, S.; Abdullah, M.M.A.B.; Razak, R.A.; Vizureanu, P.; Sandu, A.V.; Matasaru, P.-D. A State-of-the-Art Review on Innovative Geopolymer Composites Designed for Water and Wastewater Treatment. Materials 2021, 14, 7456. [Google Scholar] [CrossRef]
  222. Taki, K.; Raval, N.P.; Kumar, M. Utilization of sewage sludge derived magnetized geopolymeric adsorbent for geogenic arsenic removal: A sustainable groundwater in-situ treatment perspective. J. Clean. Prod. 2021, 295, 126466. [Google Scholar] [CrossRef]
  223. Filon, F.L.; Mauro, M.; Adami, G.; Bovenzi, M.; Crosera, M. Nanoparticles skin absorption: New aspects for a safety profile evaluation. Regul. Toxicol. Pharm. 2015, 72, 310–322. [Google Scholar] [CrossRef] [PubMed]
Materials 16 03478 g001 550
Figure 1. The scheme of the geopolymer framework [16].
Figure 1. The scheme of the geopolymer framework [16].
Materials 16 03478 g001
Materials 16 03478 g002 550
Figure 2. Search results for the terms “geopolymer” and “nanocomposite” in scientific databases.
Figure 2. Search results for the terms “geopolymer” and “nanocomposite” in scientific databases.
Materials 16 03478 g002
Materials 16 03478 g003 550
Figure 3. Search results for the terms “geopolymer” and “nanocomposite” in scientific databases from 2019 and 2020 including the type of the article.
Figure 3. Search results for the terms “geopolymer” and “nanocomposite” in scientific databases from 2019 and 2020 including the type of the article.
Materials 16 03478 g003
Materials 16 03478 g004 550
Figure 4. Selected advantages and disadvantages of nanocomposites.
Figure 4. Selected advantages and disadvantages of nanocomposites.
Materials 16 03478 g004
Materials 16 03478 g005 550
Figure 5. The impact of graphene on selected characteristics of geopolymers.
Figure 5. The impact of graphene on selected characteristics of geopolymers.
Materials 16 03478 g005
Materials 16 03478 g006 550
Figure 6. Sustainable development goals.
Figure 6. Sustainable development goals.
Materials 16 03478 g006
Table
Table 1. Overview of nanoadditives used in geopolymers and their impact on properties.
Table 1. Overview of nanoadditives used in geopolymers and their impact on properties.
NanoadditiveInvestigated EffectSource
Nano-SiO2Adding nano-SiO2 to fly-ash-based geopolymers can enhance the activity of fly ash, thus accelerating the geopolymerization process, increasing the length of the C–S hydrogen gel chain, and producing a small particle-filling effect. Finally, the fly ash and nano-SiO2 geopolymerize to form a three-site reticular inorganic gel material with Si–Al–O cross-linking.[21]
The higher the incorporation of nano-SiO2, the shorter is the setting time.[22]
The dry shrinkage performance of the geopolymer improved, and the improvement due to nano-SiO2 was greater than that due to nano-γ-Al2O3.[30]
With an increase in the content of nano-SiO2, the freezing–thawing resistance of the geopolymer is gradually strengthened at first and then gradually declines. After mixing with nano-SiO2, the geopolymer becomes denser, the pore size inside the material decreases, and the number of pores decreases, which reduces the damage to the internal structure during the freezing–thawing cycle.[31]
NanocelluloseAddition of less than 0.5% by weight of nanocellulose crystals promotes mechanical properties; on the other hand, higher concentrations of this additive protect the geopolymer against cracking in unstable curing conditions[32]
NanographiteA 3D-printed geopolymer with 1% wt. of NGPs increased the flexural strength by 89% and 46% compared to the same 3D-printed and casted geopolymer without any NGPs, respectively. The same increase for compressive strength was 28% and 12%. Moreover, the geopolymer mix containing 1% wt. of NGPs demonstrated the best shape retention and buildability.[27]
Nano-CaCO3The use of 3% wt. nano-CaCO3 in basalt-fiber-reinforced geopolymer paste presented the highest values of compressive strength and hardness while the use of 2% wt. nano-CaCO3 showed the highest values of flexural strength, impact strength, and fracture toughness of composite paste.[28]
Nano-Al2O3Addition of up to 2% wt. nano-Al2O3 increases the mechanical properties of geopolymer concrete, while the addition of 1%, 2% by weight is optimal for obtaining improvement.[33,34]
Addition of 0.75 wt. nano-aluminium improved compressive strength both in the early stage of the test (7 days) and after 28 days. Adding more nanoparticles worsened this property.[35]
Table
Table 2. Properties of geopolymers with nanoadditives at elevated temperatures.
Table 2. Properties of geopolymers with nanoadditives at elevated temperatures.
NanoparticlesMatrixInvestigated EffectSource
NanoclayVolcanic tuffThe compressive strength of the geopolymer with the addition of nanoclay increases with heating up to 300 °C. Above this temperature, it decreases by about 20%.[46]
Fly-ash slagThe addition of nanoclay in the amount of 6% wt. improves the compressive strength by 26% in relation to the base sample. In addition, this strength increases proportionally after exposure to a higher temperature of 200 °C; as the temperature increases further, the strength decreases by about 15%.[47]
Table
Table 3. The reported influence of selected nanomaterials on the properties of geopolymer nanocomposites.
Table 3. The reported influence of selected nanomaterials on the properties of geopolymer nanocomposites.
NanoadditiveObserved EffectSource
Carbon nanotubesEnhanced compressive strength, flexural strength, and mechanical fracture parameters[117,118,119,120,121,122,123,124]
Enhanced Young’s modulus and flexural toughness[123]
Decreased sorption properties and setting time[125]
Decreased bulk density and porosity[126]
Enhanced relative permittivity[127]
Enhanced fracture energy, piezoresistive response, and electrical conductivity[123]
Increased stiffness and fracture toughness[128]
Increased thermal conductivity[129]
GrapheneImproved electroconductivity, cycling durability, structure stability, and photocatalytic activity[130]
Added photocatalytic activity[131]
Decreased workability and enhanced compressive strength[132]
Enhanced stiffness, toughness, flexural strength, and compressive strength[133]
Graphene oxideEnhanced adsorption properties and photocatalytic activity[134]
Improved thermal conductivity and permeability[135]
Increased compressive strength[135,136,137,138,139]
Improved tensile strength and corrosion resistance[140]
Enhanced modulus of elasticity, chloride permeability, and microstructure density[136]
Enhanced ion-immobilization ability[139]
Enhanced flexural strength and fracture toughness[141,142,143]
NanoclayEnhanced compressive and flexural strength[144,145,146]
Enhanced rheological properties[147]
Magnetic nanoparticlesAdded magnetic properties[148,149,150,151]
Enhanced adsorption properties[148,150,152]
Enhanced removal efficiency and high recyclability[149]
Titanium dioxideReduced roughness and swelling ability[153]
Reduced porosity[153,154]
Enhanced photocatalytic activity[153,155]
Enhanced compressive and flexural strength[153,154,155,156,157]
More compact structure, enhanced ductility, and greater load-carrying capacity[157]
Enhanced adsorption properties[158]
Enhanced carbonation resistance; reduced drying shrinkage[157]
NanosilicaEnhanced tensile toughness, compressive strength, elastic modulus, and ductility[159,160,161,162,163,164,165,166]
Enhanced acid resistance, lower sorption properties[167]
Enhanced durability; reduced porosity[168]
Decreased flowability and setting time[161]
Reduced gas permeability[164]
Enhanced thermal stability[165]
Nano-silicon carbideEnhanced thermoelectric properties[169]
Calcium carbonate nanoparticlesIncreased hardness, compressive strength, and flexural strength[170,171]
Lower water penetration; decreased water adsorption[171]
Decreased porosity[171]
NanoaluminaReduced porosity, setting time, optical transmission, and water absorption; enhanced compressive strength[172]
NanozirconiaEnhanced compressive strength, ultrasonic pulse velocity, and thermal properties[173,174]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Drabczyk, A.; Kudłacik-Kramarczyk, S.; Korniejenko, K.; Figiela, B.; Furtos, G. Review of Geopolymer Nanocomposites: Novel Materials for Sustainable Development. Materials 2023, 16, 3478. https://doi.org/10.3390/ma16093478

AMA Style

Drabczyk A, Kudłacik-Kramarczyk S, Korniejenko K, Figiela B, Furtos G. Review of Geopolymer Nanocomposites: Novel Materials for Sustainable Development. Materials. 2023; 16(9):3478. https://doi.org/10.3390/ma16093478

Chicago/Turabian Style

Drabczyk, Anna, Sonia Kudłacik-Kramarczyk, Kinga Korniejenko, Beata Figiela, and Gabriel Furtos. 2023. "Review of Geopolymer Nanocomposites: Novel Materials for Sustainable Development" Materials 16, no. 9: 3478. https://doi.org/10.3390/ma16093478

APA Style

Drabczyk, A., Kudłacik-Kramarczyk, S., Korniejenko, K., Figiela, B., & Furtos, G. (2023). Review of Geopolymer Nanocomposites: Novel Materials for Sustainable Development. Materials, 16(9), 3478. https://doi.org/10.3390/ma16093478

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop