1. Introduction
Circular housing has previously been based on an economic model that allows for zero waste and recycling [
1,
2]. In the circular economy and circular housing, there has been an increasing focus on the comfort and well-being of residents, aiming to create a healthy and safe living environment. Building energy use contributes to greenhouse gas emissions [
2], accounting for approximately 40% of the global energy consumption [
3,
4]. This has led to the development of circular housing as part of the transition towards a circular economy [
5,
6]. In the 21st century, environmental issues have caused severe damage, making sustainability the most important issue at present. Design attributes and perceived needs have gradually undergone reshaping [
7].
Various external factors, such as population growth, industrialization, development, and the excessive exploitation of natural resources, have played a crucial role in environmental degradation. Community-oriented circular housing presented unprecedented challenges during the COVID-19 pandemic. The promotion of personalized housing environments that cater to individual needs and incorporate smart management systems could break through several spatial and temporal limitations. With lifestyles and working patterns shifting predominantly to the home environment, the benefits of safe and healthy circular housing have attracted the attention of consumers [
8,
9].
Rethinking architecture from the perspective of circular design allows for carbon-footprint-based manufacturing standards for circular housing, creating a built environment that meets the requirements of a circular society [
10]. It emulates the biological cycle by implementing the concept of zero waste through design and utilizing 100% recyclable building materials to achieve sustainable development in the built environment [
11]. By adopting a cradle-to-cradle design approach, sustainable development could be achieved, considering the principles of material selection, recycling, energy efficiency, and other environmental concerns [
11]. Old buildings could be transformed into new spaces through innovative economic models, employing disassembly, transformation, and reassembly, aligning with the cradle-to-cradle concept [
12].
The transition towards community-oriented circular housing is of great significance regarding sustainable development within the construction industry. This transformation has had a profound impact on consumer behavior and business models, leading to the expansion of the economic aspects of the residential consumer market, such as the growing market scale of energy-efficient products [
13]. Circular housing practices aim at reducing environmental impacts and improving quality [
14]. Despite the higher construction costs and relatively higher occupancy costs associated with circular housing, the decision-making processes of consumers are positively influenced by building material classification and recycling rates.
This has undoubtedly created added value for the development of the circular housing industry [
4,
10]. The transformation and development of circular housing presents opportunities for the future, and consumers have high expectations for this market [
9]. The understanding of consumers’ behavioral intentions towards circular housing has become a crucial area of research in both academia and the industry [
12]. Gaining insights into consumers’ needs and preferences towards community-oriented circular housing, and determining how to enhance consumers’ behavioral intentions and positive attitudes towards consumption, have emerged as essential paths by which to profit in the competitive, expanding environment of circular housing [
13,
14]. In the field of consumer behavior research, consumer perception, as an internal cognitive state, has a positive effect on purchase intention [
15].
The primary objective of this research study is to delve into the intricate relationships between design attributes, community-oriented attributes, and consumers’ attitudes towards circular housing. This research seeks to comprehend the impacts of consumers’ perceptions of value consciousness and social equity. It also aims to identify critical factors that should be considered in circular design, providing valuable insights for the promotion of circular housing practices [
16,
17]. The methodology includes a comprehensive questionnaire survey to investigate the correlation between consumer demands and the design of circular housing. Scholars have applied SOR to consumers’ purchase intentions, confirming the relationships involved and the significant influences of attitudes and repurchasing intention [
18,
19,
20,
21,
22,
23]. However, prior research has not explored the relationship between the design characteristics of circular housing design and consumers’ attitudes.
This research embodies the integration of the principles of the circular economy into architectural practices, emphasizing a shared responsibility to protect our environment. It explores the potential of merging strategies from green and smart buildings and transitioning business operations from ownership to usage rights (leasing strategies) to spur innovation and transformation in the housing market [
24]. The intended outcome is to position circular housing as a viable and effective sustainable solution, with the aim of minimizing the environmental impact of the construction industry [
25]. The majority of the current literature is focused on the perspective of design, with less exploration from the consumer’s viewpoint, particularly in terms of health and comfort considerations for circular housing. This research aimed to understand the relationship between design guidelines, consumers’ perceived value, emotional needs, and acceptance more clearly. It sought seeks to bridge the cognitive gap between users and designers.
3. Research Methodology
3.1. Data Collection
This research focused on consumers’ perceptions of circular housing design attributes, value, and cognition. It aimed to consider design in alignment with consumers’ needs, including their emotional needs, and serve as a reference for circular housing design. The design is practical and considers consumer acceptance to avoid waste. The research process was divided into two stages. The first stage included (1) expert interviews; (2) the collection of the relevant literature; (2) a questionnaire survey; (3) data analysis; (4) quality requirement planning; (5) the formulation of design factors; and (6) mental mapping. The second stage comprised a questionnaire survey, including (1) basic data; (2) the content of the questionnaire; and (3) the results. The flowchart of this research is shown in
Figure 1.
The literature background considered for the research model was insufficient and lacked rigorous support from academic theory. The research questions were posited with the consumers as the research subjects. The study included a correlation analysis considering consumers’ acceptance of circular housing, analyzing the data and factor associations. Affective value, perceived value, and social equity and their effects on acceptance and identification were examined to determine their interrelationships. Through a literature review and empirical research study of circular housing, this research aimed to contribute to subsequent related research and improve the design quality and sustainable development of circular housing. The research framework is shown in
Figure 2.
Based on the literature review, this research use incorporated expert focus discussions and the content was organized into a questionnaire using the KJ method [
47]. Five experts were invited to participate in a semi-structured qualitative interviews and statistical analysis. The research methods included a literature review, on-site observations, expert interviews, questionnaire surveys, and triangulation verification. Experts in architecture and design were invited for this research. These included professionals with a minimum of five years of practical design experience: an applied designer, an interior designer, an architectural designer, a construction project manager, and one individual with residential experience who was willing to participate. The respondents who had lived in these homes and were willing to participate in the interviews provided the most direct feedback on the functional use of shared services, the construction quality, and the appearance, color, texture, and other factors and experiences associated with circular housing. This allowed for the satisfactory fulfillment of residential needs and values. The test images used for the circular housing research process and its steps are shown in
Figure 3.
The KJ method was employed to organize the large amount of unstructured information about the attributes into meaningful groups or categories, helping to streamline the process and understand the essence of the research problem, providing relevant viewpoints, facts, or concepts [
47]. This research developed hypotheses and validated the effects of the design attributes and shared attributes on consumers’ attitudes, perceived value, and social equity towards circular housing, as well as their correlations with the promotion of circular housing. The mental maps and feedback obtained from the interviewees are shown in
Figure 4.
The survey asked about attitudes and intentions, the evaluation of design attributes, lifestyles, and expectations of the architectural space.
This research focused on circular housing, a high-value form of consumption, based on market segmentation concepts. The survey targeted Taiwanese internet users, aged 20 and above, who had economic discretionary power. The research subjects were selected from suitable, anonymous internet users who were willing to participate in the survey. To avoid duplicate responses, the Google Forms platform was used for e-mail account verification. The snowball sampling method was employed to increase the sample size. A total of 55 items were assessed, including sustainable attitudes towards circular housing design, related quality of living, the importance of shared design attribute requirements, emotional experience evaluations, and the degree of design acceptance. A Likert scale was used, with 1 indicating ‘strongly disagree’ and 5 ‘completely agree’. The survey data were collected and stored in a database to avoid missing values and invalid questionnaires.
The survey responses were disseminated via the internet to achieve the effect of questionnaire publicity. Pre-testing and questionnaire modification were carried out to achieve complete responses. Demographic data were filled included in the first part, including gender, marital status, education, place of residence, and discretionary income.
The PLS-SEM bootstrap method, which focuses on prediction, requires a smaller sample size and has a non-normal distribution and formative measurement, ensures d convergence, and has lower requirements for the residual distribution. This research aimed to effectively reduce the bias, increase the credibility, and increase the questionnaire sample size. It reached more than 10 times the total number of questions proposed.
At the beginning of the survey, demographic questions were asked. The second section focused on participants’ sustainable attitudes towards circular housing design and comprised 10 questions This section aimed to assess participants’ attitudes and beliefs regarding the sustainability aspects of circular housing design. The importance of consumer needs regarding design attributes and service attributes in occupying circular housing was considered. This section was further divided into three phases.
In Phase 1, participants were asked to assess the quality design and service attribute needs regarding circular housing. This phase included 14 questions.
Phase 2 aimed to evaluate participants’ sensory experiences of circular housing design attributes. This phase comprised 16 questions.
Phase 3 focused on participants’ acceptance of circular housing design and their demands. It included 9 questions. The measurement items are shown in
Appendix A,
Table A1.
The results of the principal component analysis factor (PCA) using the Statistical Package for the Social Sciences (SPSS) [
48], and the validation of the structural model using Smart PLS [
49], confirmed the convergent and discriminant validity of the study [
50]. Smart PLS employed a two-stage approach to validate the research model. The first stage examined whether the external model supported the construction of the hypotheses, starting with the convergent validity and discriminant validity. The second stage investigated whether the internal model validated the hypotheses, explaining the accuracy of the construction. The study employed an item-to-construct balance approach [
51], initially conducting an exploratory factor analysis, followed by hypothesis testing, model prediction, and the validation of the results. This research used SOR theory to establish an equation and conceptual framework for development [
19]. Two “stimulus” antecedents were defined as follows: design attributes, which referred to whether the circular housing design provided features such as accessibility, the reuse of materials, and resource recycling; and shared attributes, which referred to the sharing-oriented design provided by the circular housing, including rental services, smart management, and diverse shared spaces. The “organism” was defined as consumers’ cognitive and emotional responses generated by the scenario design of circular housing and the stimulating effects of sharing-oriented attributes. Perceived value was defined as the nature of the emotions expected by consumers when using circular housing. Affective value included economy, innovation, naturalness, and safety. As the dependent variable, the “response” was defined as consumers’ behavioral intentions, cognitive perceptions, and acceptance of circular housing.
3.2. Measurement
To ensure the sample’s quality, a convenient sampling method was employed to survey Taiwanese consumers. A total of 568 valid responses were collected from June to September 2023. Regarding the participants’ ages, 54.90% were in the 20–35 age group, 26.40% were in the 36–54 age group, and 18.7% were over 55 years old. Regarding their marital status, 40.50% were married, 58.50% were single, and 1.1% indicated other. In terms of residential location, 40.30% were from the northern region, 23.80% from the central region, 28.00% from the southern region, 4.60% from the eastern region, and 3.3% from the outlying islands. A total of 45.20% of the participants held a master’s degree, and 41.00% had a disposable income of TWD 20,000 or less per month.
Among the participants, 36.8% expressed a willingness to pay a 5% premium, 49.6% were willing to accept monthly rent below TWD 15,000, 36.4% had an indoor floor area requirement of 21–30 Taiwanese ping (approximately 3.3 square meters), and 40.8% desired 3 rooms. The results are shown in
Table 1.
3.3. Data Analysis
The primary objective of this research was to explore the theoretical evolution of acceptance towards circular housing design. Given that Partial Least Squares–-Structural Equation Modeling (PLS-SEM) imposes less stringent sample conditions [
50], it is a statistical technique that is suitable for the testing of causal relationships [
49]. PLS-SEM accommodates non-normally distributed data, minimizes measurement errors, and effectively manages structural models with multiple constructs; thus, it was deemed the most suitable analytical tool for this research [
52]. Smart PLS v.4.0 was used for the analysis.
4. Results
4.1. Descriptive Statistics
The Cronbach’s α coefficient in this research was higher than 0.7, indicating high reliability. The Kaiser–Meyer–Olkin (KMO) measure of sampling adequacy was used to determine the suitability for factor analysis, yielding a value of 0.907, with a significance level of 0.000, fulfilling the conditions for factor analysis. Principal component analysis (PCA and Varimax rotation were used for the factor analysis. The analysis identified factors that explained 61.742% of the total variance, representing the components of circular housing design [
48]. The structural model of the SOR theory, was validated through an empirical study to explore the design attributes and sharing-oriented attributes factors in circular housing that influenced affective value, perceived value, social equity, identification and acceptance based on the survey results, and research hypotheses were verified.
Measurement methods from the previous literature were adopted [
42,
53]; detailed information on the measurement items is provided in
Table 2. The means of the construct reflected the consumers’ perceptions of the construct: social equity (Mean = 3.737), perceived value (M = 3.471), identification (M = 3.927), design attributes (M = 4.093), shared attributes (M = 4.078), naturalness (M = 3.754), and safety (M = 3.897), as shown in
Table 2.
This research used the SOR theory to examine the relationships among circular housing design attributes, shared attributes, affective value, perceived value, and social equity, identification, and acceptance. The aim was to explore the interrelationships between the variables, rather than the relationships among individual sub-constructs within latent constructs.
4.2. Measurement Model
The analysis was conducted in two stages. The first stage evaluated the external model to support the assumed constructs, focusing on the convergent validity [
59]. The second stage examined the internal model to validate the assumed hypotheses. The composite reliability (CR) was used to measure the construct reliability, with a critical value set at 0.7. The results indicated that the constructs met the reliability requirement, as shown in
Table 3. The first step was to evaluate the construct reliability, convergent validity, and discriminant validity using the measurement model. Each test is discussed in the following subsections The construct reliability was measured using the criteria of composite reliability (CR). The critical value was set at 0.7, indicating that the construct met the reliability requirement [
52]. This research’s CR (0.817–0.911), rho_A (0.698–0.893), indicated good composite reliability. The AVE (threshold is 0.5) tests two important constructs in a model, convergent validity and discriminant validity. Discriminant validity is observed when the AVE value is greater than the correlation coefficient between the latent variables. Regarding factor loading (the threshold was 0.5), for this research’s individual items’ reliability, the factor loading was (0.633–0.879). Regarding the AVE (0.516–0.678), the average variance of 10 dimensions was greater than 0.5, indicating good convergent validity. This shows that the internal consistency of the questionnaire was sufficient to support the research results, as shown in
Table 3.
The common method variance (CMV) [
60] was assessed using Harman’s single-factor method and statistical correction techniques [
61]. The single factor explained only 12.868% of the variance, below the threshold of 50%, indicating that CMV was not a concern in this research.
Structural equation modeling (SEM) using Smart PLS was employed to analyze the relationships between the constructs and validate the hypotheses. The factor loadings were significant, the composite reliability exceeded 0.7, and the average variance extracted (AVE) exceeded 0.5 [
62].
The design attributes supported naturalness, safety, economy, innovation, and social equity, with explanatory power (AVEs) of 0.574, 0.544, 0.629, 0.678, and 0.573, respectively, indicating that the model had a good degree of explanation for acceptance. These five probable antecedent variables collectively accounted for 0.516 of the overall explanatory power for acceptance, with innovation being the most crucial source of variance. Economy, perceived value, and social equity, the three most probable antecedent variables, accounted for 0.6 of the overall influence on the sense of identification, demonstrating a good level of explanation.The most significant probable antecedent variable influencing identification was perceived value. The results are shown in
Table 3 and
Figure 5.
Regarding the comprehensive fit index, the goodness-of-fit value in the composite model SRMR was 0.067 (<0.08), indicating a good fit. The results indicated that the heterotrait–monotrait criterion (HTMT) values were all below 0.85, demonstrating good discriminant validity [
63], as shown in
Table 4.
This research compriseds ten distinct elements, thus reinforcing the substantial positive correlation between consumers’ awareness and the acceptance of circular housing.
4.3. Structural Model
The bootstrapping resampling method was used to examine the statistical significance of each path coefficient. A randomly selected subsample was used over 5000 iterations employing overlays to estimate the hypothesized relationships [
51]. For the corresponding endogenous constructs, Stone–Geisser’s Q
2 was used to assess the predictive relevance of the endogenous constructs [
53]. The results indicated that the Q
2 values for identification (0.133) and acceptance (0.080) exceeded the recommended thresholds (>0) [
52]. The
t-statistic > 1.65,
p < 0.1, and the effect sizes (
f2) were 0.35, 0.15, and 0.02, which represented large, medium, and small effects, respectively. The coefficient of determination R
2 had values of 0.75, 0.50, and 0.25, indicating significant, moderate, and weak effects, respectively, demonstrating sufficient predictive relevance for the respective constructs [
60,
62].
This research adopted the significance levels recommended by Henseler [
63]. All statistical tests were conducted using a two-tailed format to evaluate the significance of the path coefficients and corresponding
t-values [
64].
The results showed that out of the 17 direct relationships, only one was rejected, namely H3c, which posited that naturalness would positively influence acceptance (β = −0.052, p > 0.1). The following hypotheses were supported.
H1a states that design attributes positively influence the economy via affective value. The hypothesized path for H1a was positive and significant (β = 0.268, p < 0.01); thus, hypothesis H1a was supported.
H1b states that design attributes positively influence innovation via affective value. The hypothesized path for H1b was positive and significant (β = 0.182, p < 0.1); thus, hypothesis H1b was supported.
H1c states that design attributes positively influence naturalness via affective value. The hypothesized path for H1c was positive and significant (β = 0.403, p < 0.1); thus, hypothesis H1c was supported.
H1d states that design attributes positively influence safety via affective value. The hypothesized path for H1c was positive and significant (β = 0.421, p < 0.1); thus, hypothesis H1d was supported.
H1e states that design attributes positively influence social equity. The hypothesized path for H1e was positive and significant (β = 0.286, p < 0.1); thus, hypothesis H1e was supported.
H2a states that shared attributes positively influence the economy via affective value. The hypothesized path for H2a was positive and significant (β = 0.197, p < 0.01); thus, hypothesis H2a was supported.
H2b states that shared attributes positively influence innovation via affective value. The hypothesized path for H2b was positive and significant (β = 0.190, p < 0.1); thus, hypothesis H2b was supported.
H2c states that shared attributes positively influence perceived value. The hypothesized path for H2c was positive and significant (β = 0.265, p < 0.1); thus, hypothesis H2c was supported.
H2d states that shared attributes positively influence social equity. The hypothesized path for H2d was positive and significant (β = 0.150, p < 0.1); thus, hypothesis H2d was supported.
H3a states that the economy positively influences identification. The hypothesized path for H3a was positive and significant (β = 0.137, p < 0.1); thus, hypothesis H3a was supported.
H3b states that innovation positively influences acceptance. The hypothesized path for H3b was positive and significant (β = 0.088, p < 0.1); thus, hypothesis H3b was supported.
H3c states that naturalness positively influences acceptance. The hypothesized path for H3c was positive and significant (β = −0.052, p > 0.1); thus, hypothesis H3c was supported.
H3d states that safety positively influences acceptance. The hypothesized path for H3d was positive and significant (β = 0.146, p < 0.1); thus, hypothesis H3d was supported.
H4a states that perceived value positively influences acceptance. The hypothesized path for H4a was positive and significant (β = 0.301, p < 0.1); thus, hypothesis H4a was supported.
H4b states that perceived value positively influences identification. The hypothesized path for H4b was positive and significant (β = 0.228, p < 0.1); thus, hypothesis H4b was supported.
H5a states that society positively influences acceptance. The hypothesized path for H5a was positive and significant (β = 0.392, p < 0.1); thus, hypothesis H5a was supported.
H5b states that society positively influences identification. The hypothesized path for H5b was positive and significant (β = 0.354, p < 0.1); thus, hypothesis H5b was supported.
The design attributes showed significant positive correlations with economy, innovation, naturalness, safety, and social equity. The estimated values for these attributes were 5.504, 3.607, 9.523, 10.865, and 5.291, respectively.
In addition, the shared attributes exhibited positive correlations with economy, innovation, perceived value, and social equity. The estimated values for these attributes were 3.505, 3.084, 6.484, and 2.934, respectively.
Regarding the probable antecedent variables influencing identification, economy, perceived value, and social equity had estimated values of 3.236, 4.960, and 6.659, respectively. Among these variables, social equity was identified as the most important probable antecedent, showing positive correlations with economy, perceived value, and social equity.
In terms of acceptance, the probable antecedent variables were innovation, safety, perceived value, and social equity, with estimated values of 2.225, 3.820, 7.604, and 8.407, respectively. Social equity was found to be the most influential variable in terms of acceptance.
Naturalness was also identified as a probable antecedent variable influencing acceptance, with an estimated value of 1.417, although it did not reach the significance threshold. Circular housing is a practice rooted in cradle-to-cradle design principles. It aims to promote the concepts of valuing nature and minimizing waste, and it was perceived by participants as having a naturally inspired design. However, there were differing opinions, with some participants considering circular housing as a linear model. The results are shown in
Table 5 and
Figure 5.
The analytical results of the model from developed in this research are comprehensively compiled, as seen in
Table 5, and the overall structural analysis of the research is depicted in
Figure 5.
This research, comprising ten distinct elements, provided empirical support for 16 of the 17 proposed hypotheses, thus reinforcing athe substantial positive correlation between consumers’ awareness and the acceptance of circular housing.
4.4. Mediation Effect
The significance of the
t-value was determined using a threshold of 1.96 [
52]. A
t-value greater than 1.96 was considered significant, while a
t-value less than 1.96 was considered non-significant. A variance accounted for (VAF) value below 20% indicates no mediation effect, while a VAF between 20% and 80% indicates a partial mediation effect. A VAF above 80% indicates a complete mediation effect [
63]. The significance of the indirect effect was assessed using the bootstrap method [
65]. This research examined the mediation effects and interaction effects of two probable antecedent variables on another probable antecedent variable.
The test results indicated a positive and partial mediation effect of the mediating effect on the research hypothesis. The results of the questionnaire survey revealed the preferred order of consumer decision making based on their psychological needs, including social equity, and perceived value. Among them, for affective value, the order was safety, economy, innovation, and naturalness.
Consumers with higher purchasing power are increasingly seeking circular housing spaces that not only offer physical amenities but also emphasize service design, encompassing intangible values and imagery. These factors have the potential to influence consumers’ perceptions, attitudes, and intentions. This research highlighted the significant mediating role of consumers’ emotional attachment to organic materials, affective value, perceived value, and social equity. Consumer perception, as an internal cognitive state, positively influenced the development of purchase intention. The mediation analysis and total effects are shown in
Table 6 and
Table 7.
5. Discussion and Conclusions
The results emphasized the importance of improving the service quality efficiency in terms of affective value, perceived value, and social equity. The focus was on emotional responses related to shared attributes that induced affective value, perceived value, and social equity. From a total of 17 hypotheses, 16 were significantly and positively supported, demonstrating partial mediation, with the mediation effect of social equity being more prominent. The prioritization of social equity, perceived value, and affective value (safety, economy, innovation, and naturalness) by consumers influenced their consumption decisions. Understanding the interaction effects of these factors is crucial for designers in regard to the design and demand for sustainable housing. The lack of support for one hypothesis may have been due to the consumer perception that naturalness is considered a prerequisite for circular housing but is insufficient to elicit consumer acceptance.
This research provides d design attribute–-value–-result strategies to enhance the design of circular housing and promote its development. It explored the relationship between consumers’ acceptance and identification of circular design and the development of circular housing. It first established a structural model based on the SOR theory. Adding the mental map of interview results into the model, this research analyzed the design attribute–-value–-result, and the influence of applied SEM-PLS analysis on to examine the identification and acceptance of circular housing.
The consumer’s perception of circular housing is formulated as below. Regarding the design attributes (DA) of circular housing, consumers greatly appreciate resource recycling designs such as water-saving methods, water supply systems, and energy-saving systems. Regarding the shared attributes (SA) of circular housing, consumers highly value charging policies and subsidies that uphold social justice. Regarding the affective value of the economy (EC), of circular housing, consumers strongly agree that the lifestyle and architectural space of circular housing should project a practical image, In Regarding the affective value of innovation (IN) of circular housing, consumers strongly agreed that the lifestyle and architectural space of circular housing should project an innovative image, In Regarding the affective value of naturalness (NA) of circular housing, consumers strongly agreed that the lifestyle and architectural space of circular housing should project a natural image, In Regarding the affective value of safety (SAF) of circular housing, consumers strongly agreed that the lifestyle and architectural space of circular housing should project a comfortable image. Regarding the perceived value (PV) of circular housing, consumers highly value information related to environmental sustainability and low carbon. This significantly positively influences acceptance and identification. Regarding the social equity (SE) of circular housing, consumers highly appreciate the provision of shared facilities, which can foster greater community cohesion. This significantly positively influences acceptance and identification. Regarding the acceptance (ACC) of circular housing, consumers strongly desire sufficient information in order to decide whether to move into circular housing. Regarding the identification (ID) of circular housing, consumers strongly identify with the cradle-to-cradle design, which aligns with the trend of environmental sustainability.
Circular housing is still in its early stages, and the satisfaction with naturalness natural designs varies. The verification interviews indicated that the consumers had different responses to the affective value of naturalness, suggesting variations in consumer preferences and habits. With in the affective value of consumer perception, the sub-constructs “openness” and “efficiency” represent consumer expectations for an open, shared living lifestyle format (space, kitchen, facilities) while still desiring privacy, thus suggesting the need to enhance the design quality of the personal living space. The consumers expected a lease service model rather than ownership, and they desired efficient and immediate rental services. Decision -makers and designers are advised to adjust their circular housing design strategies accordingly. The interplay between circular design attributes, shared service attributes, affective value, perceived value, and social equity influenced the acceptance and identification of circular housing. The significance of the correlations assists could assist designers in selecting relevant design factors with high correlations for reference in prioritizing certain designs. This implies that circular housing design must create refined living environments and incorporate sustainable environmental and low-carbon contents, while also enhancing designs focused that are sharing-oriented and provide immediate service efficiency to attract consumers. The results of the study indicate that successful circular housing design should strive for excellence in terms of naturalness, innovative living functionalities, a sharing-oriented economy, safety, and diverse intelligent management.
This research, comprising ten distinct elements, provided empirical support for 16 of the 17 proposed hypotheses, thus reinforcing the substantial positive correlation between consumers’ awareness and acceptance of circular housing. The research further validated the mediating effects and the results from of the interviews, revealing a significant connection between consumers’ perceived value and their levels of acceptance. The aspect of social equity received the highest rating. It is recommended to incorporate consumers’ preferences during the design process, in order to bolster consumer identification, bridge the gap in understanding gap between consumers and designers, and efficiently market the housing to a diverse customer base.
Circular housing illustrates represents an innovative approach in the architectural field, promoting sustainability. This concept amalgamates methods from green and intelligent building design, reconceptualizing the planning of materials and buildings in alignment with the principles of a circular economy. This approach underscores the optimal utilization of resources that are reusable, renewable, and sustainable, with the aim to of minimizing environmental impacts.
5.1. Managerial Implications
This research focused on general consumers to examine the positive impacts of design attributes and shared attributes on consumer value and willingness to accept. The results showed that the consumers had a positive perception and acceptance of circular design preferences, such as naturalness, innovation, economy, and safety, which positively influenced identification and acceptance. Perceived value and social equity enhanced the consumers’ willingness to consume. The contextual and shared attribute designs of circular housing played important roles in perceived value and social equity, and they further generalized the impact of various affective factors on consumers. These findings could help designers to identify the key elements of circular design that attract consumers, avoid design mismatches with market needs, and reduce the environmental impacts, providing practical guidance.
The survey results validated the positive correlation between participants’ perceptions and affective value, perceived value, social equity, and consumption willingness; the consideration of these factors can enhance well-being, shared value, and acceptance in circular housing design. This survey revealed that the younger population, aged 20 and 35, is more receptive to circular housing than in the past. This is primarily attributed to the high cost of purchasing a house in Taiwan. Circular housing, which is emerging as a significant trend in the construction sector, requires consumer engagement for its sustainable development. The enhancement of consumer services and the assessment of quality satisfaction are thus imperative. Satisfaction surveys and purchase intention, as commonly employed in business management, have become crucial tools in understanding consumer dynamics in this context. Circular housing is a successful example of sustainable development in green architecture and is worthy of further research.
The research findings provide a reference for subsequent designers to establish quality designs at the early stage, while also reducing the environmental burden caused by designs that do not meet the market demands. This research adopted an online questionnaire survey, with respondents being proactive consumers who possessed a willingness to try and explore new concepts. Therefore, the use of online search keywords for the design was more suitable. The measurement of consumer lifestyles was achieved by describing consumers’ psychological traits and analyzing them to provide effective marketing strategies, enabling more consumers to identify with and gain a deeper understanding of the concept of circular housing. As part of the design strategy improvement, it is recommended to increase consumers’ willingness and acceptance of the housing by enhancing its effectiveness and stimulating consumers’ behavioral intention.
The results of this research demonstrate that circular housing’s design plays a crucial role in its success. By gaining an in-depth understanding of consumer needs and applying relevant models for analysis, the critical design features of circular housing could be identified, thereby increasing consumers’ satisfaction and the success rate of circular housing design. Managers and designers of circular housing should prioritize circular housing design and create attractive and influential circular housing based on the research results, to increase the likelihood of a successful design. In the past, housing was merely used to fulfill residential needs and there was limited collaboration with shared services and other businesses. The adoption of a demand-oriented mindset to ensure reusability and provide shared design opportunities expands the housing opportunities while considering the reasons for the need for circular design. Exploring and defining competitors means satisfying needs, rather than merely providing housing itself. The transformation of housing has become an important issue in urban governance under the trend of the circular economy. This research provides valuable insights to promote the design and construction of circular housing. By understanding consumers’ demands for design attributes and providing information on environmental sustainability, it is possible to enhance the acceptability of shared space design and circular housing. This research integrated ten research dimensions—design attributes, shared attributes, economy, innovation, naturalness, safety, perceived value, social equity, acceptance, and identification—applied to circular housing research, bridging the gaps in past research. This provides more practical and academic research value.
The outcomes of this research provided invaluable insights and implications for designers and managers of circular housing.
5.2. Research Limitations
As the implementation of circular housing in Taiwan is still ongoing, this research ensured representativeness by considering consumer acceptance The study’s limitations include the nascent stage of circular housing in Taiwan. Expanding the research scope and sample population could add more value.
Due to the characteristics of leasing and the majority of renters being mobile populations in need of rental housing, it is not feasible to conduct comprehensive research and investigation on all circular housing designs. The relevance of other contextual factors related to circular housing design, such as social welfare or design quality, was not considered in this research. This research provides a clear theoretical framework and practical innovation for research in the field of circular housing design strategies. Future research is recommended to focus on collecting more data, exploring additional research methods and hypotheses, and improving the quality of design for circular housing.
The participants in this research were residents with prior living experience who were willing to engage in interviews. The study not only incorporated the methodology of participant interviews but also integrated the findings into the model. The implementation of new intelligent building regulations set for December 2024 in Taiwan, transitioning from the current 8 metrics to 6, is expected to impact the intelligent services and management associated with shared attributes. It is recommended that this aspect be continuously monitored in the future, with the potential for further research focused on residents’ living experiences.