Next Article in Journal
Fabrication and Characterization of Hydrogen Peroxide and Thymol-Loaded PVA/PVP Hydrogel Coatings as a Novel Anti-Mold Surface for Hay Protection
Next Article in Special Issue
Multifunctional Heterogeneous Ion-Exchange Membranes for Ion and Microbe Removal in Low-Salinity Water
Previous Article in Journal
Effects of Nanosilver and Heat Treatment on the Pull-Off Strength of Sealer-Clear Finish in Solid Wood Species
 
 
Article
Peer-Review Record

Aromatic Polyimide Membranes with tert-Butyl and Carboxylic Side Groups for Gas Separation Applications—Covalent Crosslinking Study

Polymers 2022, 14(24), 5517; https://doi.org/10.3390/polym14245517
by Noelia Esteban 1, Marta Juan-y-Seva 2, Carla Aguilar-Lugo 3, Jesús A. Miguel 1, Claudia Staudt 4, José G. de la Campa 2, Cristina Álvarez 2,5,* and Ángel E. Lozano 1,2,5,*
Reviewer 1:
Reviewer 2:
Polymers 2022, 14(24), 5517; https://doi.org/10.3390/polym14245517
Submission received: 15 November 2022 / Revised: 8 December 2022 / Accepted: 12 December 2022 / Published: 16 December 2022
(This article belongs to the Special Issue Advances in Separation and Purification with Polymeric Membranes)

Round 1

Reviewer 1 Report

The report is titled "Aromatic polyimide membranes with tert-butyl and carboxylic side groups for gas separation applications. Covalent crosslinking study" and nicely fits the journal. There are some minor corrections that the authors could consider.

The introduction is too long and tedious; from page 3, the last paragraph starting with "Aromatic... to the last paragraph of the introduction on the fifth page" should transfer to the result and discussion parts.

The authors have not measured the aging effect of the prepared membrane, which is an important parameter to this work, they could include.

There have been more seminal works published in recent years; the authors could update their references with recently published works.

 

Author Response

Please see the attachment

Author Response File: Author Response.pdf

Reviewer 2 Report

1. The abstract should state briefly the purpose of the research, the principal results and major conclusions. The authors should rewrite the abstract for these standards.

2. The conclusion has to describe the achieved results. Generally conclusion and abstract have to be connected and have to answer the same questions.

3. Introduction describes some research about crosslinking studies. However, the method of how the crosslinked was measured in the polymer membrane in the current research wasn't present. Maine structural parameters of the polymer network, like crosslinking degree, have to be shown.

4. The following references focusing on crosslinking studies are suggested to be cited DOI: 10.15587/1729-4061.2020.216745

5. In the section of introduction and analysis, the following references focusing on gas removal are suggested to be cited

DOI: 10.11159/iceptp22.185

DOI: 10.1016/j.molliq.2022.120287

DOI: 10.3390/membranes11020097

 

 

 

 

 

 

 

Author Response

Please see the attachment

Author Response File: Author Response.pdf

Back to TopTop