1. Introduction
In the 21st century, a considerable amount of attention has been paid to nanotechnology, which is the most emerging scientific area of research and has is of industrial and engineering significance. The nanofluids with effective thermal characteristics are engaged in fundamental applications like solar systems, power collectors, material processing, as a coolant, medical agents, nuclear reactors, chemical industries, geo-thermal engineering, petroleum industries, etc. The feature that makes the nanofluid more versatile is the use of such metallic nanoparticles to enhance the thermal extrusion system and manufacturing processes in various industrial products. Beside this, nanofluids signify the significance in the material fabrication because they are considered to be biologically friendly, durable and sustainable products. Recently, a variety of experimental and theoretical computations were performed to explore the thermophysical aspects of such nanoparticles. The term “nanofluid”, a suspension of nanoparticles with liquids, was coined by Choi [
1]. Later on, Buongiorno [
2] claimed that convective heat transfer of nanofluid is characterized by seven slip mechanisms, which mainly include Brownian motion and thermophoresis diffusion. The mechanism of heat transportation based on flow of nanoparticles cannot be completely investigated without these important diffusion coefficients. Sandeep and Sulochana [
3] predicted the simultaneous thermophysical features in three types of viscoelastic fluids, namely Maxwell fluid, Oldroyd-B fluid and Jeffrey fluid, additionally featuring the heat absorption and generation consequences. The thermally developed flow of micropolar nanofluid with impact of heat source and sink has been numerically attempted by Pal and Mandal [
4]. Khan et al. [
5] implemented mass flux constraints in diffusion of rate type nanoparticles with influence of thermal radiation. The suspension of water-based nanoparticles induced by rotating disk with variable thickness and melting heat transfer was reported by Hayat and co-workers [
6]. Tlili et al. [
7] examined the heat transfer characteristics in the flow of aluminum oxide and copper nanoparticles with suspension of sodium alginate base liquid. The modeled problem was numerically simulated by using shooting technique. The study focused by Khan and Shehzad [
8] deals with the thermophoresis and Brownian motion aspects in flow of third-grade nanofluid induced by periodically moving accelerated surface. Waqas et al. [
8] investigated the rheological significance of Maxwell and micropolar nanoparticles in the presence of porous space where a modeled problem was numerically preceded. Another theoretical continuation examining the viscous dissipation and magnetic force features was numerically examined by Hsiao [
9]. Sheikholeslami and Bhatti [
10] interpolated the shape feature effect in force convection flow of nanoparticles influenced by magnetic force. Turkyilmazoglu [
11] studied the thermophysical properties in the flow of both single- and double-phase nanofluid models encountered by concentric annuli.
The phenomenon of “bioconvection” is associated with the macroscopic motion of particles which results from the collective swimming of microorganism due to density gradient. The movement of such microorganism is self-impelled due to which the density of base liquid improves in some specific direction. This variation in the base fluid density due to involvement of microorganism is termed as bioconvection, and recently, a considerable deviation on this topic has been intended by researchers. The microorganisms are classified into oxytactic, negative gravitaxis, chemo-taxis and gyrotactic microorganisms based on impellent factor. Unlike such microorganisms’ movement, the deviation in nanoparticles is not self-originated, but their movement is associated with the most important factors of thermophoresis factor and Brownian diffusion. The applications of bioconvection phenomenon include bio-fuels, drug delivery, enzymes, bio-technology, biosensors and nano-biotechnology. The primary contribution which deals with the bioconvection of nanoparticles was directed by Kuznetsov [
12,
13] in which it is claimed that the presence of gyrotactic microorganisms in nanoparticles can be improve the density stratification. Uddin et al. [
14] incorporated the suction and injection features in slip flow of nanofluid with gyrotactic microorganisms induced by a moving surface. Xun et al. [
15] anticipated the bio-convective of nanoparticles configured by a rotating system where the impact of viscosity is assumed to be temperature dependent. Another mathematical model which reports the bioconvection aspects in Casson nanoparticles under the influence of thermal radiation was formulated by Raju et al. [
16]. Alsaedi et al. [
17] reported the bioconvection flow of magneto-nanoparticles induced by a convectively heated stretched configuration. The flow caused due to truncated cone carrying nanoparticles and gyrotactic microorganisms was checked out by Khan et al. [
18]. The bioconvection aspects associated with the generalized second-grade nanofluid flow has been reported by Waqas et al. [
19]. Another work based on the bioconvection of nanoparticles featuring activation energy and slip impact in flow of Eyring Powell non-Newtonian fluid has been analyzed by Alwatban et al. [
20]. Tlili et al. [
21] proposed a theoretical model for the stretched flow of Oldroyd B nanofluid in presence of gyrotactic microorganism. They also employed second-order slip features, namely Wu’s slip, which leads to a truncation of associated boundary layers. The mixed convection flow of nanoparticles in horizontal channel containing gyrotactic microorganisms has been studied by Xu and Pop [
22]. Sheremet and Pop [
23] investigated thermo-bioconvection in nanoparticles configured by a porous cavity.
The dynamic of non-Newtonian fluids is quite interesting due to interdisciplinary rheological features and complex physical properties; it has attained special attention of researchers in recent days. From the flow of non-Newtonian fluids emerged a variety of interesting applications, like polymer solutions, slurries, biological fluids, blood, lubrication, chemical industries, etc. It is commonly visualized that these fluids show a nonlinear behavior which cannot be predicted via simple mean. Among these models, third-grade fluid is one which attributes the shear thickening/shear thinning features effectively. The Cauchy stress tensor for third-grade fluid can be defined as follows [
24]:
where represents the pressure;
is for identity tensor;
is the dynamic viscosity;
denotes the Rivlin–Ericksen tensors; and
,
and
are material constants which have following relations:
The Rivlin–Ericksen tensors
and
are defined as follows:
A variety of work based on the rheological features of third-grade fluid is attributed in references [
25,
26,
27].
Following such valuable applications of bioconvection of magnetized nanoparticles, we analyzed the flow of third-grade nanofluid with gyrotactic microorganisms over a stretched surface in presence of second-order slip constraints. Additionally, the viscous dissipation, activation energy and thermal radiation effects are also reported on the current simulations. The governing dimensionless flow problem is numerically simulated by adopting the shooting procedure. The effects of physical parameters governing the current flow situations are graphically impacted with justified relevant significance and are based on the symmetry concept.
2. Mathematical Modelling
Let us study bioconvection prospective in third-grade nanofluid flow induced by a stretched surface in the
xy-plane. The considered fluid is assumed to be electrically conducting where magnetic field effects are imposed by a normally directed uniform magnetic field. For thermally developed flow, the consequences of thermal radiation are inspected by using Rosseland approximations. The activation energy prospective is also utilized with evaluation of Arrhenius chemical reaction relations. The flow is subjected to the Wu’s slip, for which relevant expressions are used coinciding two slip parameters. Moreover, the convective Nield’s boundary constraints has been suggested for the temperature and concentration distributions of nanoparticles. The free-stream nanoparticles’ temperature, concentration and motile microorganism are respectively represented by
and
Based on such assumptions, the governing flow equations for the evaluated flow problem can be expressed in following forms:
The important physical quantities appeared above can be defined as,
reports velocity component in
direction,
represents the component of velocity along
direction,
is kinematic viscosity,
is the fluid density,
volume expansion coefficient,
gravity,
is the nanoparticles density,
is the microorganisms particles density,
is the temperature,
represents the concentration,
microorganisms density,
thermal diffusivity,
mean absorption coefficients,
Stephan-Boltzmann,
is effective heat capacity of base fluid,
effective heat capacity of nanoparticles,
reports the diffusion constant,
represents the magnetic field intensity,
is the diffusivity of micro-organisms,
is average volume of a microorganism,
thermodiffusion constant,
reaction rate,
Boltzmann constant,
activation energy,
is speed of cells while
denotes the chemotaxis constant.
The following boundary conditions are structured to the current flow problem:
where
represents the heat transfer coefficient, while
is the convective fluid temperature. The slip effects in the current flow situation are considered in form of second order, which was originally developed by Wu [
28], and later on, some interesting contributions were proceeded by numerous investigators [
29,
30,
31,
32].
where
notify the Knudsen number,
is the momentum coefficient with and
molecular mean free path. Following to the definition of
it was observed that, for
assigned values, we should
It is remarked that molecular mean free path is always positive [
32].
Following this, similarity quantities are incorporated in order to attained the dimensionless form of the governing equations:
While inserting the above variables in the governing flow Equations (6)–(9), one yields the following:
The abovementioned transmuted equations acquire a flowing set of boundary conditions:
where
is Hartmann number,
is material parameter,
mixed convection parameter,
buoyancy ratio parameter,
bioconvection Rayleigh number,
is Reynolds number,
is third grade fluid parameter,
Prandtl number,
radiation parameter,
Brownian motion parameter,
thermophoresis parameter,
Eckert number,
Lewis number,
is reaction constant,
temperature difference parameter,
activation energy parameter,
specify microorganism concentration difference constant,
is Peclet number,
determine the bioconvection Lewis number,
is thermal Biot number while
and
first order slip and second order slip constants which are mathematically related into following forms:
The numerical values for local Nusselt number, local Sherwood number and motile density number can be calculated by using the following relations:
5. Discussion
This section deals with the physical significance of flow model constructed and simulated in previous sections. Now we examine the change in the nanoparticles velocity, nanoparticles temperature distribution, concentration distribution and microorganism density distribution for each flow parameter like Hartmann number , material parameter , Grashoff number , buoyancy ratio parameter , bioconvection Rayleigh number , Reynolds number , third grade fluid parameter , Prandtl number , radiation parameter , Brownian motion parameter , thermophoresis parameter , Eckert number , Lewis number , reaction constant , temperature difference parameter , activation energy parameter , Peclet number , bioconvection Lewis number , microorganism concentration difference parameter , thermal Biot number , first order slip factor and second order slip For performing graphical analysis, one parameter varies while all the physical parameters are referred to some constant values like , and
The output which concern with the variation of
and
on
is demonstrated in
Figure 1. It is observed that increment in buoyancy ratio parameter
and bioconvection Rayleigh number
causes a reduction in the velocity profile. The physical explanation associated with such trend may attribute as both parameters involves the buoyancy ratio force which resists the association magnetized nano-particles in the flow region. The physical impact of slip factors
and
on
has been studied in
Figure 2. The change in the velocity distribution is altered due to interaction of slip effects. The increment of both slip factors show a decaying velocity distribution which is more progressive for
.
Figure 3 exhibits the distinctions of temperature profiles
for higher values of Prandtl number
and radiation parameter
. A depreciate temperature profile
has been noted for progressive values of
In fact Prandtl number captured is inversely relation with thermal diffusivity which reports a declining
However, in case of radiation parameter, an enhanced temperature distribution is noted. Thermal radiation is the mode of heat transfer which utilizes some extra energy to the system which can be more helpful to improve the heat transfer phenomenon. The significance of thermal radiation includes many applications like solar energy systems and various extrusion processes.
Figure 4 exhibits the impact of viscoelastic parameter
and third grade fluid parameter
on temperature distribution
. The temperature distribution
goes downturn with increase of both parameters due to presence of viscosity effects. However, the increment in
is more dominant for
as compared to
Figure 5 indicates the variation of Biot number
and thermophoresis parameter
on
. Since
is directly related to the heat transfer coefficient which responded an improved temperature distribution. The change in
is also more sufficient with variation of thermophoresis constant
The thermophoresis phenomenon is encountered a diverse interesting compliance in many industrial processes. This phenomenon occurs due when heated fluid particles move to the lower temperature difference region and as result the temperature distribution get enlarge due to temperature difference.
Figure 6 illustrates the effect of first order slip
and second order slip factor
on temperature distribution
. The temperature profile get large with increment of both slip parameters. Now we analyze the impact of mixed convection
and Reynolds number
on
Figure 7 is prepared. The variation in both parameters results a depressed temperature profile.
The importance of Brownian motion
and Lewis number
concentration profile
is displayed by
Figure 8. A decreasing trend in concentration distribution
is found out for larger values of Brownian motion
and Lewis number
. The change in
involves the Brownian movement of fluid particles which decay the nanoparticles concentration
The impact of
also leads to a decrement of
as it Lewis number retained reverse relation with mass diffusivity. Therefore, slightly minimum mass diffusivity is noted when
get maximum variation.
Figure 9 underlines the graphical prospective of Prandtl number
and activation energy
on concentration
Both parameters shows opposite trend on concentration distribution. With rising values of
a lower variation in
is resulted. The result portrayed for activation energy parameter
claimed an increasing concentration distribution. The activation energy signifies a prime implication in many reactive processes. The activation energy play a valuable roll to improve the reaction phenomenon. The importance of mixed convection parameter
and Reynolds number
on
is graphically deliberated in
Figure 10. The prominent observation justified a declining profile of
for both flow parameters.
Figure 11 explore the variation in
due to change in material parameter
and third grade fluid parameter
. By assigning numerical values to both material parameters, it is revealed that concentration profile
decreases which is more dominant with variation of
Physically, both parameters are associated with fluid viscosity which results a diminishing concentration profile. The roll of slip factors
and
on
is presented in
Figure 12 which shows that concentration distribution depressed with both slip factors
and
The analysis for motile microorganism distribution
for increasing numerical values of first order slip parameter
and second order slip factor
is depicted in
Figure 13. A strengthened in
is evaluated when both parameter enlarge increasing values. The effect of Reynolds number
and mixed convection constant
on motile microorganism profile is drawn in
Figure 14. Obtained results exhibiting a decreasing profile of
due to variation of Reynolds number and mixed convection parameter. The effective convection result in small amount of motile distribution. To visualize the impact of viscoelastic parameter
and third-grade fluid parameter
on motile microorganism distribution
we portrayed
Figure 15. The demonstrated results report that when we uplift both parameters, the motility profile
gives a declining trend.
Figure 16 divulges the effect of bioconvection Lewis number
and Peclet number
on motile microorganism profile
. As intensify the values of
and
results a declining motile microorganism distribution
The higher values of
corresponds to minimum motile diffusivity due to which a declining motile microorganisms profile
is configured.
The numerical results are reported in
Table 2 for variation of
against various flow parameters like
and
It is examined that
get maximum values with increment of
while reverse trend is reported with variation of
and
Table 3 evaluates the impact of local Nusselt number
against variation of
and
With increase of
and
the change in local Nusselt number in lower in contrast to
and
From
Table 4 where change in local Sherwood number
is inspected which shows that
declined with
and
while it increases with
and
Finally, from
Table 5, it is reveal that the motile density number boost up with
and