A Superior High-Strength Dilute Mg-Bi-Ca Extrusion Alloy with a Bimodal Microstructure
Abstract
:1. Introduction
2. Materials and Methods
3. Results and Discussion
4. Conclusions
Author Contributions
Funding
Institutional Review Board Statement
Informed Consent Statement
Data Availability Statement
Conflicts of Interest
References
- Liu, L.; Wang, J.; Russell, T.; Sankar, J.; Yun, Y. The biological responses to magnesium-based biodegradable medical devices. Metals 2017, 7, 514. [Google Scholar] [CrossRef] [Green Version]
- Meng, S.; Yu, H.; Fan, S.; Li, Q.; Park, S.H.; Suh, J.S.; Kim, Y.M.; Nan, X.; Bian, M.; Yin, F.; et al. Recent progress and development in extrusion of rare earth free mg alloys: A review. Acta Metall. Sin.-Engl. Lett. 2019, 32, 145–168. [Google Scholar] [CrossRef] [Green Version]
- Rojas, J.I.; Crespo, D. Onset Frequency of Fatigue Effects in Pure Aluminum and 7075 (AlZnMg) and 2024 (AlCuMg) Alloys. Metals 2016, 6, 50. [Google Scholar] [CrossRef] [Green Version]
- Zarandi, F.; Yue, S. Magnesium sheet; Challenges and opportunities. In Magnesium Alloys—Design, Processing and Properties; Frank, C., Ed.; InTech: London, UK, 2011; ISBN 978-953-307-520-4. [Google Scholar]
- Abedini, A.; Butcher, C.; Worswick, M.J. Application of an Evolving non-associative anisotropic-asymmetric plasticity model for a rare-earth magnesium alloy. Metals 2018, 8, 1013. [Google Scholar] [CrossRef] [Green Version]
- Sravya, T.; Sankaranarayanan, S.; Abdulhakim, A.; Manoj, G. Mechanical properties of magnesium-rare earth alloy systems: A review. Metals 2015, 5, 1–39. [Google Scholar]
- Meng, S.; Dong, L.; Yu, H.; Huang, L.; Han, H.; Cheng, W.; Feng, J.; Wen, J.; Li, Z.; Zhao, W. New ultra-high-strength AB83 alloy by combining extrusion and caliber rolling. Materials 2020, 13, 709. [Google Scholar] [CrossRef] [PubMed] [Green Version]
- Meng, S.; Yu, H.; Zhou, J.; Han, H.; Li, Y.; Dong, L.; Nan, X.; Li, Z.; Shin, K.S.; Zhao, W. Enhancing the mechanical properties of AZ80 alloy by combining extrusion and three pass calibre rolling. Metals 2020, 10, 249. [Google Scholar] [CrossRef] [Green Version]
- Pan, H.; Qin, G.; Huang, Y.; Ren, Y.; Sha, X.; Han, X.; Liu, Z.-Q.; Li, C.; Wu, X.; Chen, H.; et al. Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength. Acta Mater. 2018, 149, 350–363. [Google Scholar] [CrossRef] [Green Version]
- Mohan, R. Green bismuth. Nat. Chem. 2010, 2, 336. [Google Scholar] [CrossRef]
- Meng, S.J.; Yu, H.; Cui, H.X.; Wang, Z.F.; Zhao, W.M. Microstructure and mechanical properties of extruded pure Mg with Bi addition. Acta Metall. Sin. 2016, 52, 811–820. [Google Scholar]
- Yu, H.; Fan, S.; Meng, S.; Choi, J.O.; Li, Z.; Go, Y.; Kim, Y.M.; Zhao, W.; You, B.S.; Shin, K.S. Microstructural evolution and mechanical properties of binary Mg-xBi (x = 2, 5, and 8 wt%) alloys. J. Magnes. Alloy. 2021, 9, 983–994. [Google Scholar] [CrossRef]
- Meng, S.; Yu, H.; Zhang, H.; Cui, H.; Park, S.H.; Zhao, W.; You, B.S. Microstructure and mechanical properties of an extruded Mg-8Bi-1Al-1Zn (wt.%) alloy. Mat. Sci. Eng. A 2017, 690, 80–87. [Google Scholar] [CrossRef]
- Jin, S.-C.; Lee, J.U.; Go, J.; Yu, H.; Park, S.H. Effects of Sn addition on the microstructure and mechanical properties of extruded Mg-Bi binary alloy. J. Magnes. Alloys 2022, 10, 850–861. [Google Scholar] [CrossRef]
- Liu, Y.; Cheng, W.; Zhang, Y.; Niu, X.; Wang, H.; Wang, L. Microstructure, tensile properties, and corrosion resistance of extruded Mg-1Bi-1Zn alloy: The influence of minor Ca addition. J. Alloys Compd. 2020, 815, 152414. [Google Scholar] [CrossRef]
- Remennika, S.; Bartschb, I.; Willbold, E.E.; Witte, F.; Shechtman, D. New, fast corroding high ductility Mg-Bi-Ca and Mg-Bi-Si alloys, with no clinically observable gas formation in bone implants. Mater. Sci. Eng. B 2011, 176, 1653–1659. [Google Scholar] [CrossRef]
- Meng, S.; Yu, H.; Fan, S.; Kim, Y.M.; Park, S.H.; Zhao, W.; You, B.S.; Shin, K.S. A high-ductility extruded Mg-Bi-Ca alloy. Mater. Lett. 2020, 261, 127066. [Google Scholar] [CrossRef]
- Meng, S.; Yu, H.; Li, L.; Qin, J.; Woo, S.K.; Go, Y.; Kim, Y.M.; Park, S.H.; Zhao, W.; Yin, F.; et al. Effects of Ca addition on the microstructures and mechanical properties of as-extruded Mg–Bi alloys. J. Alloys Compd. 2020, 834, 155216. [Google Scholar] [CrossRef]
- Meng, S.; Yu, H.; Han, H.; Feng, J.; Huang, L.; Dong, L.; Nan, X.; Li, Z.; Park, S.H.; Zhao, W. Effect of multi-pass caliber rolling on dilute extruded Mg-Bi-Ca alloy. Metals 2020, 10, 332. [Google Scholar] [CrossRef] [Green Version]
- Wang, Q.H.; Zhai, H.W.; Liu, L.T.; Xia, H.B.; Jiang, B.; Zhao, J.; Chen, D.L.; Pan, F.S. Novel Mg-Bi-Mn wrought alloys: The effects of extrusion temperature and Mn addition on their microstructures and mechanical properties. J. Magnes. Alloy. 2021. [Google Scholar] [CrossRef]
- Yu, H.; Park, S.H.; You, B.S. Development of extraordinary high-strength Mg–8Al–0.5Zn alloy via a low temperature and slow speed extrusion. Mat. Sci. Eng. A 2014, 610, 445–449. [Google Scholar] [CrossRef]
- Oh-ishi, K.; Mendis, C.L.; Homma, T.; Kamado, S.; Ohkubo, T.; Hono, K. Bimodally grained microstructure development during hot extrusion of Mg-2.4Zn-0.1Ag-0.1Ca-0.16Zr (at.%) alloys. Acta Mater. 2009, 57, 5593–5604. [Google Scholar] [CrossRef]
- Yu, H.; Xin, Y.; Wang, M.; Liu, Q. Hall-Petch relationship in Mg alloys: A review. J. Mater. Sci. Technol. 2018, 34, 248–256. [Google Scholar] [CrossRef]
- Jain, A.; Duygulu, O.; Brown, D.W.; Tomé, C.N.; Agnew, S.R. Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet. Mater. Sci. Eng. A 2008, 486, 545–555. [Google Scholar] [CrossRef]
Alloy | Alloying Content | Tensile Properties | Remark | ||
---|---|---|---|---|---|
TYS (MPa) | UTS (MPa) | EL (%) | |||
BX11 | ~2% | 394 ± 5.0 | 411 ± 4.3 | 6.6 ± 0.6 | This study |
Mg | ~0% | 120 ± 3.0 | 208 ± 2.0 | 12 ± 2.0 | [11] |
TX22 | ~4% | ~443 | ~460 | ~1.2 | [9] |
Mg-2Bi | ~2% | 172 ± 1.0 | 218 ± 2.0 | 12.8 ± 0.5 | [12] |
B6 | ~6% | 189 ± 3.0 | 228 ± 3.2 | 19 ± 2.0 | [11] |
BAZ811 | ~10% | 291 ± 1.0 | 331 ± 1.0 | 14.6 ± 0.5 | [13] |
AZ31 | ~4% | 200 ± 1.0 | 284 ± 1.0 | 24.5 ± 0.3 | [13] |
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Meng, S.; Zhang, M.; Xiao, H.; Luo, Z.; Yu, W.; Jiang, R.; Cheng, X.; Wang, L. A Superior High-Strength Dilute Mg-Bi-Ca Extrusion Alloy with a Bimodal Microstructure. Metals 2022, 12, 1162. https://doi.org/10.3390/met12071162
Meng S, Zhang M, Xiao H, Luo Z, Yu W, Jiang R, Cheng X, Wang L. A Superior High-Strength Dilute Mg-Bi-Ca Extrusion Alloy with a Bimodal Microstructure. Metals. 2022; 12(7):1162. https://doi.org/10.3390/met12071162
Chicago/Turabian StyleMeng, Shuaiju, Mingchi Zhang, Haoran Xiao, Zhanju Luo, Wei Yu, Runlin Jiang, Xueqi Cheng, and Lidong Wang. 2022. "A Superior High-Strength Dilute Mg-Bi-Ca Extrusion Alloy with a Bimodal Microstructure" Metals 12, no. 7: 1162. https://doi.org/10.3390/met12071162