Plasticity Resource of Cast Iron at Deforming Broaching
Abstract
:1. Introduction
2. Methods for the Determination of Plasticity Margin
3. Materials and Methods
3.1. Materials
3.2. Methods
4. Results and Discussion
5. Conclusions
Author Contributions
Funding
Data Availability Statement
Acknowledgments
Conflicts of Interest
References
- Rosenberg, A.M.; Rosenberg, O.A. Mechanics of Plastic Deformation in the Processes of Cutting and Deforming Broaching; Naukova Dumka: Kyiv, Ukraine, 1990; p. 320. ISBN 5-12-001624-3. (In Russian) [Google Scholar]
- Sheykin, S.Y.; Rostotskyi, I.Y.; Protsyshyn, V.T.; Melnichenko, V.V.; Studenets, S.F.; Efrosinin, D.V. Improving the Performance of Hard-Alloy Deforming Broaches Using Modified Technological Lubricants. J. Superhard Mater. 2020, 42, 276–282. [Google Scholar] [CrossRef]
- Bekaev, A.A.; Mikhailov, V.A.; Kuz’minskii, D.L. Influence of the hole in the blank on the quality and precision of the hole obtained by broaching. Russ. Eng. Res. 2011, 31, 362–364. [Google Scholar] [CrossRef]
- Kolmogorov, V.L.; Spevak, L.F.; Churbayev, R.V. On the technique used to determine plasticity margin in high-speed deformation under high pressure. Int. J. Mech. Sci. 2008, 50, 676–682. [Google Scholar] [CrossRef]
- Kolmogorov, V.L.; Fedotov, V.P.; Gorshkov, A.V. Three-dimensional analysis of the stress–strain state in the process of plastic deformation of metals. J. Mater. Process. Technol. 1999, 95, 55–64. [Google Scholar] [CrossRef]
- Kõrgesaar, M. The effect of low stress triaxialities and deformation paths on ductile fracture simulations of large shell structures. Mar. Struct. 2019, 63, 45–64. [Google Scholar] [CrossRef]
- Ortiz-De-Zarate, G.; Madariaga, A.; Garay, A.; Azpitarte, L.; Sacristan, I.; Cuesta, M.; Arrazola, P. Experimental and FEM analysis of surface integrity when broaching Ti64. Procedia CIRP 2018, 71, 466–471. [Google Scholar] [CrossRef]
- Sheykin, S.Y.; Grushko, O.V.; Melnichenko, V.V.; Studenets, S.F.; Rostotskyi, I.Y.; Iefrosinin, D.V. On the Contact Interaction between Hard-Alloy Deforming Broaches and a Workpiece during the Shaping of Grooves in the Holes of Tubular Products. J. Superhard Mater. 2021, 43, 222–230. [Google Scholar] [CrossRef]
- Grzesik, W. Development in broaching technology. Part I. Development of broaching machines and tooling devices. Mechanik 2021, 5, 6–11. [Google Scholar] [CrossRef]
- Arrazola, P.J.; Rech, J.; M’Saoubi, R.; Axinte, D. Broaching: Cutting tools and machine tools for manufacturing high quality features in components. CIRP Ann.—Manuf. Technol. 2020, 69, 554–577. [Google Scholar] [CrossRef]
- Studenets’, S.F.; Eryomin, P.M.; Chernyavs’kyi, O.V. The influence of deformation conditions on the structure and hardening of cast iron surface layer in machining with combined carbide broaches. J. Superhard Mater. 2015, 37, 282–288. [Google Scholar] [CrossRef]
- Sheikin, S.E.; Paschenko, E.A.; Rostotsky, I.Y.; Gavrilova, V.S.; Protsishin, V.T. Process lubricant for deforming broaching of pieces made of titanium. Metall. Min. Ind. 2014, 6, 56–65. Available online: https://library.ajman.ac.ae/eds/detail?db=asn&an=101641048 (accessed on 25 January 2023).
- Václav, Š.; Sivtsev, N.; Senderská, K. Investigation of stress-strain state of a workpiece at gauge burnishing of its holes. Adv. Sci. Technol. Res. J. 2017, 11, 211–222. [Google Scholar] [CrossRef] [Green Version]
- Chen, Z.; Peng, R.L.; Moverare, J.; Avdovic, P.; Zhou, J.M.; Johansson, S. Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures. Metall. Mater. Trans. A 2020, 47, 3664–3676. [Google Scholar] [CrossRef] [Green Version]
- González, G.; Plogmeyer, M.; Zanger, F.; Biehl, S.; Bräuer, G.; Schulze, V. Effect of tool coatings on surface grain refinement in orthogonal cutting of 4140 steel. Procedia CIRP 2020, 87, 176–180. [Google Scholar] [CrossRef]
- Bai, J.; Tong, Z. A novel multiscale material plasticity simulation model for high-performance cutting AISI 4140 steel. Int. J. Adv. Manuf. Technol. 2021, 116, 3891–3904. [Google Scholar] [CrossRef]
- Çırak, O.; Altan, E. Development of a Software for Designing In-Hole Broaching Tools. J. Adv. Manuf. Eng. 2020, 1, 101–121. Available online: https://dergipark.org.tr/en/pub/jame/issue/65471/1012079 (accessed on 25 January 2023).
- Kishawy, H.A.; Hosseini, A.; Moetakef-Imani, B.; Astakhov, V.P. An energy-based analysis of broaching operation: Cutting forces and resultant surface integrity. CIRP Ann.—Manuf. Technol. 2012, 61, 107–110. [Google Scholar] [CrossRef]
- Dou, W.; Xu, Z.; Hu, H.; Huang, H. A generalized plasticity model incorporating stress state, strain rate and temperature effects. Int. J. Impact Eng. 2021, 155, 103897. [Google Scholar] [CrossRef]
- Sarkar, S.; Singh, I.V.; Mishra, B.K. A localizing gradient plasticity model for ductile fracture. Comput. Methods Appl. Mech. Eng. 2022, 388, 114205. [Google Scholar] [CrossRef]
- Natkowski, E.; Sonnweber-Ribic, P.; Münstermann, S. Surface roughness influence in micromechanical fatigue lifetime prediction with crystal plasticity models for steel. Int. J. Fatigue 2022, 23, 106792. [Google Scholar] [CrossRef]
- Collini, L.; Moroni, F.; Pirondi, A. Modeling the influence of stress triaxiality on the failure strain of nodular cast iron microstructures. Procedia Struct. Integr. 2019, 18, 671–687. [Google Scholar] [CrossRef]
- Stashkov, A.N.; Schapova, E.A.; Afanasiev, S.V.; Stashkova, L.A.; Nichipuruk, A.P. Estimation of residual stresses in plastically deformed eutectoid steel with different perlite morphology via magnetic parameters. J. Magn. Magn. Mater. 2022, 546, 168850. [Google Scholar] [CrossRef]
- Yajima, Y.; Koga, N.; Watanabe, C. Influential factors on the deformability of colonies in pearlitic steel. Mater. Charact. 2021, 177, 111197. [Google Scholar] [CrossRef]
- Rastellini, F.; Socorro, G.; Forgas, A.; Onate, E. A triaxial failure diagram to predict the forming limit of 3D sheet metal parts subjected to multiaxial stresses. J. Phys. Conf. Ser. 2016, 734, 032020. [Google Scholar] [CrossRef] [Green Version]
- Moakhar, S.; Hentati, H.; Barkallah, M.; Louati, J.; Haddar, M. Influence of geometry on stress state in bulk characterization tests. Comptes Rendus Mécanique 2019, 347, 930–943. [Google Scholar] [CrossRef]
- He, X. Predicting ductility of Mg/SiCp nanocomposite under multiaxial loading conditions based on unit cell modeling. Int. J. Mech. Sci. 2020, 184, 105831. [Google Scholar] [CrossRef]
- Danas, K.; Ponte Castañeda, P. Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials. Int. J. Solids Struct. 2012, 49, 1325–1342. [Google Scholar] [CrossRef] [Green Version]
- Metzger, M.; Seifert, T. Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron—Part I: Methods and microstructure-based models. Int. J. Solids Struct. 2015, 66, 184–193. [Google Scholar] [CrossRef]
- Metzger, M.; Seifert, T. Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron—Part II: Initial yield surfaces and directions. Int. J. Solids Struct. 2015, 66, 194–206. [Google Scholar] [CrossRef]
- Metzger, M.; Seifert, T. Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron—Part III: A new yield function derived from microstructure-based models. Int. J. Solids Struct. 2016, 87, 102–109. [Google Scholar] [CrossRef]
- Metzger, M.; Seifert, T. Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron—Part IV: Assessment of the yield surface after plastic loading. Int. J. Solids Struct. 2018, 141, 173–182. [Google Scholar] [CrossRef]
- Kasvayee, K.A.; Ghassemali, E.; Jarfors, A.E. Micro-Crack Initiation in High-Silicon Cast Iron during Tension Loading. In Proceedings of the TMS 2015 Annual Meeting & Exhibition, Orlando, FL, USA, 15–19 March 2015; pp. 947–953. [Google Scholar] [CrossRef]
- Hütter, G.; Zybell, L.; Kuna, M. Micromechanisms of fracture in nodular cast iron: From experimental findings towards modeling strategies—A review. Eng. Fract. Mech. 2015, 144, 118–141. [Google Scholar] [CrossRef]
- Kasvayee, K.A.; Ghassemali, E.; Salomonsson, K.; Sujakhu, S.; Castagne, S.; Jarfors, A.E. Strain localization and crack formation effects on stress-strain response of ductile iron. Mater. Sci. Eng. A 2017, 702, 265–271. [Google Scholar] [CrossRef] [Green Version]
- Gebhardt, C.; Nellessen, J.; Bührig-Polaczek, A.; Broeckmann, C. Influence of Aluminum on Fatigue Strength of Solution-Strengthened Nodular Cast Iron. Metals 2021, 11, 311. [Google Scholar] [CrossRef]
- Shepelenko, I.; Tsekhanov, Y.; Nemyrovskyi, Y.; Gutsul, V.; Mahopets, S. Compression Mechanics of Cylindrical Samples with Radial Deformation Limitation. In Lecture Notes in Mechanical Engineering; Advances in Design, Simulation and Manufacturing IV. DSMIE-2021; Springer: Cham, Switzerland, 2021; pp. 53–62. [Google Scholar] [CrossRef]
- Rice, J.R.; Tracey, D.M. On the ductile enlargement of voids in triaxial stress fields. J. Mech. Phys. Solids 1969, 17, 201–217. [Google Scholar] [CrossRef] [Green Version]
- Andrade, F.; de Sá, J.C.; Pires, F.A. Assessment and comparison of non-local integral models for ductile damage. Int. J. Damage Mech. 2014, 23, 261–296. [Google Scholar] [CrossRef]
- Ammar, M.M.A.; Shirinzadeh, B.; Elgamal, H.; Nasr, M.N.A. On the Role of Damage Evolution in Finite Element Modeling of the Cutting Process and Sensing Residual Stresses. Sensors 2022, 22, 8547. [Google Scholar] [CrossRef]
- Shepelenko, I.; Nemyrovskyi, Y.; Tsekhanov, Y.; Mirzak, V.; Mahopets, S. Features of Plasticity Diagram Construction for Low-Plastic Materials. In Lecture Notes in Mechanical Engineering; Advanced Manufacturing Processes III. InterPartner-2021; Springer: Cham, Switzerland, 2022; pp. 353–362. [Google Scholar] [CrossRef]
- Razanica, S.; Malakizadi, A.; Larsson, R.; Cedergren, S.; Josefson, B.L. Fe modeling simulation Machining Alloy718 based ductile continuum damage. Int. J. Mech. Sci. 2020, 171, 105375. [Google Scholar] [CrossRef]
- Motoyama, Y.; Sekiguchi, S.; Okane, T.; Yoshida, M. Thermo-elasto-plastic finite element analysis of warping deformation during casting of gray cast iron. J. Mater. Process. Technol. 2020, 277, 116454. [Google Scholar] [CrossRef]
- Grilli, N.; Hu, D.; Yushu, D.; Chen, F.; Yan, W. Crystal plasticity model of residual stress in additive manufacturing using the element elimination and reactivation method. Comput. Mech. 2021, 69, 825–845. [Google Scholar] [CrossRef]
- Zhang, X.; Zhang, Y.; Yin, Y.; Zhang, Y.; Li, S.; Duan, S.; Huang, Z.; Chen, B.; Pei, S.; Wang, H. Simulation of the forming process of conical cup shaped by laser-induced shock waves. Int. J. Adv. Manuf. Technol. 2017, 91, 1619–1630. [Google Scholar] [CrossRef]
- Álvarez, L.; Luis, C.J.; Puertas, I. Analysis of the influence of chemical composition on the mechanical and metallurgical properties of engine cylinder blocks in grey cast iron. J. Mater. Process. Technol. 2004, 153–154, 1039–1044. [Google Scholar] [CrossRef]
- Zakiev, I.; Storchak, M.; Gogotsi, G.A.; Zakiev, V.; Kokoieva, Y. Instrumented indentation study of materials edge chipping. Ceram. Int. 2021, 47, 29638–29645. [Google Scholar] [CrossRef]
- Storchak, M.; Zakiev, I.; Träris, L. Mechanical properties of subsurface layers in the machining of the titanium alloy Ti10V2Fe3Al. J. Mech. Sci. Technol. 2018, 32, 315–322. [Google Scholar] [CrossRef]
- Filatov, Y.D.; Sidorko, V.I.; Filatov, O.Y.; Yaschuk, V.P.; Heisel, U.; Storchak, M. Surface quality control in diamond abrasive finishing. Proc. SPIE 2009, 7389, 833–841. [Google Scholar] [CrossRef]
- Filatov, Y.D.; Filatov, A.Y.; Syrota, O.O.; Yashchuk, V.P.; Monteil, G.; Heisel, U.; Storchak, M. The influence of tool wear particles scattering in the contact zone on the workpiece surface microprofile formation in polishing quartz. J. Superhard Mater. 2010, 32, 415–422. [Google Scholar] [CrossRef]
- Fluhrer, J. Deform-User Manual Deform V12.0; SFTC: Columbus, OH, USA, 2019. [Google Scholar]
- Heisel, U.; Krivoruchko, D.V.; Zaloha, W.A.; Storchak, M.; Stehle, T. Thermomechanical material models in the modeling of cutting processes. ZWF Z. Wirtsch. Fabr. 2009, 104, 482–491. [Google Scholar] [CrossRef]
- Storchak, M.; Jiang, L.; Xu, Y.; Li, X. Finite element modeling for the cutting process of the titanium alloy Ti10V2Fe3Al. Production Engineering. Res. Dev. 2016, 10, 509–517. [Google Scholar] [CrossRef]
- Heisel, U.; Krivoruchko, D.V.; Zaloha, W.A.; Storchak, M.; Stehle, T. Breakage models for the modeling of cutting processes. ZWF Z. Wirtsch. Fabr. 2009, 104, 330–339. [Google Scholar] [CrossRef]
- Tsekhanov, J.; Storchak, M. Development of analytical model for orthogonal cutting. Prod. Eng. Res. Dev. 2015, 9, 247–255. [Google Scholar] [CrossRef]
- Heisel, U.; Krivoruchko, D.V.; Zaloha, W.A.; Storchak, M.; Stehle, T. Thermomechanical exchange effects in machining. ZWF Z. Wirtsch. Fabr. 2009, 104, 263–272. [Google Scholar] [CrossRef]
- Ogorodnikov, V.A.; Dereven’ko, I.A.; Sivak, R.I. On the Influence of Curvature of the Trajectories of Deformation of a Volume of the Material by Pressing on Its Plasticity Under the Conditions of Complex Loading. Mater. Sci. 2018, 54, 326–332. [Google Scholar] [CrossRef]
- Yoon, S.-Y.; Barlat, F.; Lee, S.-Y.; Kim, J.-H.; Wi, M.-S.; Kim, D.-J. Finite element implementation of hydrostatic pressure-sensitive plasticity and its application to distortional hardening model and sheet metal forming simulations. J. Mater. Process. Technol. 2022, 302, 117494. [Google Scholar] [CrossRef]
Chemical Composition (%) | Mechanical Properties | |||||||
---|---|---|---|---|---|---|---|---|
C | Cr | Si | Mn | Ti | Hardness, HB (MPa) | Strength Limit, σb (MPa) | Poisson’s Ratio, µ | Elastic Modulus, E, (GPa) |
2.65 | 0.10 | 0.1 | 0.5 | 0.08 | 1700–1900 | 200 | 0.27 | 160 |
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Nemyrovskyi, Y.; Shepelenko, I.; Storchak, M. Plasticity Resource of Cast Iron at Deforming Broaching. Metals 2023, 13, 551. https://doi.org/10.3390/met13030551
Nemyrovskyi Y, Shepelenko I, Storchak M. Plasticity Resource of Cast Iron at Deforming Broaching. Metals. 2023; 13(3):551. https://doi.org/10.3390/met13030551
Chicago/Turabian StyleNemyrovskyi, Yakiv, Ihor Shepelenko, and Michael Storchak. 2023. "Plasticity Resource of Cast Iron at Deforming Broaching" Metals 13, no. 3: 551. https://doi.org/10.3390/met13030551