2. Weaving Contexts at Poggio Civitate
The community of Poggio Civitate engaged in three phases of large-scale architectural development. The earliest phase of occupation at the site, dated to the early Orientalizing period and therefore referred to as the Early Phase Orientalizing Complex, preserves at least two buildings of a larger scale than the traces of curvilinear huts dating to the same time period found to the southwest.
1 One of them, a large-scale rectilinear residence, Early Phase Orientalizing Complex 4 (EPOC4), appears to be a domestic space which utilized a terracotta tile roof with decorative elements including a horn acroterion and decorative plaques.
2 Materials associated with the floor surface of EPOC4 in the interior and front porch space were grains, seeds, and ceramics suggestive of food processing, assembly, and consumption.
3 Spindle whorls and rocchetti found on the floor surface are indicative of thread and textile industry, designating that this domestic space doubled as a production space.
4On the highest plateau of the hill, known as the Piano del Tesoro, the following two phases of monumental architectural building occurred. During the second quarter of the seventh century BCE, in the mid-Orientalizing period, a complex of three large scale structures with a common decorative program were constructed around an open area (
Figure 1). This Orientalizing Complex, which housed the settlement’s aristocratic rulers and the centralized activities of the community, was composed of an opulent residence (OC1/Residence), a building that is tripartite in structure and possibly acted as the center of religious activity (OC3/Tripartite), and an open-air workshop that housed several forms of manufacturing and the processing of resources (OC2/Workshop).
5 The complex provides spaces for the continuation of the domestic and productive activities of the elite inhabitants of the Early Phase Orientalizing Complex with an increased restriction of the visibility of those activities within the internal open area.
6Sometime between the end of the seventh or beginning of the sixth century BCE the Orientalizing Complex was destroyed in a fire that consumed the buildings of the hilltop. The community prepared the area for new construction and combined the functions of the three previous structures into one building with newly introduced defensive works, known as the Archaic Complex (
Figure 2).
7 The structure was composed of four wings arranged around a partially colonnaded central courtyard. Each wing of the structure measured 60 m in length, placing this structure among the largest known in Central Italy at this time period.
It is within this politically charged iconographic environment that the manufacturing activities of the site took place. The spaces associated with production have revealed a multitude of industrial activities occurring within and around the monumental structures simultaneously and indicate that the non-elite members of the community were involved in the production of elite ceramics and roofing decoration. In fact, molds for the production of the roofing elements have been recovered in excavations, such as a mold for the fabrication of antefixes in the form of male human heads from the OC2/Workshop and a mold for the female faces on the Archaic lateral sima from the west of the complex in an area associated with non-elite domestic and production spaces.
8 These findspots illustrate that artisans involved in the creation of the monumental decoration for elite spaces, but not part of the elite class themselves, were tasked with creating other ceramic elements such as pottery and textile production objects.
3. The Stamped Rocchetti of Poggio Civitate
Weaving tools, including spindle whorls, rocchetti, and loom weights, were created and used within spaces, such as OC2/Workshop and likely some portion of the Archaic Complex, which possessed monumental decorations that moreover were likely created by the same non-elite artisans creating these decorative roofing elements. Rocchetti are cylindrical objects with flaring, bulbous ends, most often made from ceramic, and associated with the production of fibers and textiles.
9 The exact function of rocchetti within the process of textile production in Etruria is not certain. It has been suggested that rocchetti held fibers or yarns during the weaving process or were used as a method of storing and transporting yarn, acting as simple spools.
10Excavations at Poggio Civitate have revealed numerous examples of rocchetti, totaling 875 identifiable fragments from across the site. Intact examples, numbering fewer than 200, suggest that the majority of the rocchetti at Poggio Civitate weighed less than 50 g. This weight is consistent with their use in tablet weaving, a method that utilizes square tablets which can be rotated to create different sheds (
Figure 3).
11 Tablet weaving allowed for the creation of elaborate patterns in narrow bands or as decorative borders.
12 Rocchetti likely functioned as the weights securing the fibers attached to the tablets.
13 The relatively consistent weight of rocchetti at Poggio Civitate not only confirms their use in tablet weaving, but also suggests that textile production was conducted in an organized and centralized manner which enforced consistency. The output from Poggio Civitate’s large-scale textile and thread production activities most likely served not only the hilltop dwellers, but also rural communities surrounding the site.
14 This model for a local, even inward- facing textile economy, is consistent with other modes of production at Poggio Civitate.
15Decoration on rocchetti is frequent and appears on the bulbous ends of the object, as the shaft would be covered while in use.
16 The decoration was created utilizing simple shapes, incised or impressed.
17 Rolled stamps or the impression of cords used to create geometric patterns become popular as early as the Villanovan period and are present in the archaeological record of Poggio Civitate.
18 Stamps similar to those used on Etruscan ceramics are also common throughout Etruria and became popular concurrently with stamped ceramics during the second half of the seventh century BCE.
19 The most frequent decoration found on Etruscan rocchetti and ceramic wares is concentric circles, a geometric pattern that is popular throughout Etruria. The long history of concentric circles on ceramics in Etruria suggests that this geometric design is born out of an existing local Italic decorative tradition.
20 Concentric circles are also the most frequently preserved stamp present on the rocchetti from Poggio Civitate, representing 46% of the 194 rocchetti preserving identifiable stamped decoration. Other rocchetti preserve stamps with one central image displaying a single figure set in a square or circular impression.
21 While stamps preserving vegetal or geometric designs, as well as fantastic animals, are a widespread phenomenon in Etruria, the following discussion reviews the corpus of stamped decoration preserved at Poggio Civitate.
22The most popular stamp, comprising 28% of the preserved stamps, is an image of a quadruped standing or striding. The animals displayed on these stamps are challenging to identify due to their stylized nature, the small size of the impressions, and the often uneven application of the stamp on the surface of the clay, however, in some cases it is possible to identify both real and mythological animals among the animal stamps. The real animals depicted in stamped decorations are horses and deer. The horses are highly stylized, with flaring muzzles and wide tails, prancing to the left on curved legs, all four of which are visible. The same style of stamp appears on two fragments of impasto drinking vessels found to the north of the Archaic Complex (
Figure 4).
23 The deer, depicted in profile, extends its neck high and stretches its antlers over his back; all four legs of the deer are spread wide and visible. Like the horse stamps, the deer stamps appear on both rocchetti and drinking vessels.
24 Moreover, the horse and deer iconography also correspond to animal acroteria that decorated the roof of the Archaic Complex.
Examples of winged felines, most likely sphinxes, are also found among the stamped decoration of rocchetti (
Figure 5).
25 Similar to the real animals, the sphinxes are depicted striding to the right in profile with all legs visible. The sphinx has a human head and a curved tail with a single wing extending from the back of the sphinx, similar in style to the volute-like wings of the sphinx statue which decorated the roof of the Archaic Complex.
26 Other winged mythological animals are evident in the preserved stamps, such as a possible chimaera, but are difficult to identify with certainty.
A further 16% of the stamped decoration on rocchetti are lotus palmettes or curving vegetal volutes (
Figure 6). This category of stamps is highly variable, with most examples preserving leaves curling outward from a central design. One example, preserved on two rocchetti, is defined by two large petals of a palmette with three petals branching from a central stalk.
27 Three additional petals decorate the base. Other examples display crossed, curving volutes placed over a central stalk, or a singular line ending in two inward curling volutes around a central vegetal decoration.
28 Stylistically, these vegetal stamps fit comfortably within the iconography of the monumental decoration present in both phases of the site and often accompany other elements of eastern-inspired decoration, such as the images of the fertility deity and the mythological animals.
Similar to the larger category of palmettes and volutes, eight examples preserve vegetal rosettes stamped multiple times on the decorated ends of rocchetti.
29 The rosettes vary in style between a composition of radiating lines around a central circle and a design composed of a circle split into eight petals. Where the rosette stamps are impressed more than once on the head of the rocchetti, one is placed centrally and the others form a circle around it, following the diameter of the head’s edge. Rosettes frequently accompany other elements of eastern iconography such as lotus palmettes and volutes, and were incorporated on the lateral sima of the Archaic Complex alongside female and feline heads.
One exceptional example includes three identical stamps of an armed warrior surrounded by a double triangle of rolled decoration on the preserved end of a sole impasto rocchetto (
Figure 7).
30 The armed warrior is in relief, turning to the left, carrying a shield on his left arm, and holding a weapon out with his right arm. The weapon is difficult to distinguish, but is likely a club or a short spear. The image is the only example found at Poggio Civitate of a human figure on the decoration of a rocchetto, but is similar in design to a stamp that repeats six times on a fine impasto vessel fragment in which an armed warrior viewed frontally holds objects in both hands.
31 The objects are curved and may represent a bow and/or a shield. The similarity of the two stamps, each only preserved in one example of each object class, suggests a shared iconographic environment between the two objects. When the rocchetto was in use for the production of textiles, the warrior rocchetto was likely used in combination with other stamped rocchetti, surrounding the warrior with real or mythological animals, vegetal motifs, and palmettes, recalling the images of the fertility deity that appeared on both phases of the monumental decoration and the helmeted warrior appearing with the fertility deity on the kantharoi.
While stamps with concentric circles are derived from a longstanding local Italic tradition, the stamps that echo motifs present on the monumental decoration of the site reflect new traditions, influenced by the contemporary Mediterranean koine, implemented by the local elite to communicate their unique political messages and concerns. The elite of Poggio Civitate introduced this iconography through the decoration on monumental architecture and banqueting wares to communicate and reinforce their aristocratic position, solidifying their authority over the non-elite members of the community.
4. Elite Iconography in Monumental Architecture and Banqueting Wares
The three structures of the Orientalizing Complex had identical roofing systems and a unified decorative program. Lateral sima bearing feline-faced waterspouts directed water off the roof (
Figure 8). A female face antefix covered the exposed end of the terminal cover tiles.
32 Along the ridgepole of the roof were acroteria composed of triangular lotuses and palmettes with curving volutes.
33 OC1/Residence had an additional cut-out acroterion, now fragmentary, potentially depicting a feline; other structures in the complex also preserved evidence of fragmentary cut-out animal statuary.
34 An additional acroterion found near the OC1/Residence was composed of two volutes which terminate in feline heads that bite a human male figure standing in the center. This composition suggests the Master of Animals motif, consistent with other Etruscan depictions of a male figure attacked by the animals that accompany the female fertility deity, Potnia Theron, or the ‘Mistress of Animals’.
35 The ‘Mistress of the Animals’ is also recalled in other elements of the Orientalizing Complex’s decorative program including the lotuses, stylized volutes, and, most obviously, the repeating female and feline faces of the eaves. The representation of this fertility goddess at Poggio Civitate reflects her popularity in Etruria, where she first appears in elite burial contexts on imported luxury goods in the 7th century BCE.
36 The adoption of her iconography into elite representation reflects the political concerns of the familial members of the aristocratic governing body which utilize the symbolic fertility and sexuality of the ‘Mistress of Animals’ to propagate their familial line.
37A similar iconographic message was included on objects found within and to the north-east of the OC1/Residence structure of the complex. A large banqueting service, including bronze cauldrons and drinking vessels with decorative images echoing those on the monumental architecture, was recovered.
38 The drinking vessels included imported cups from eastern Greece and a larger body of locally made vessels that could support a dining service for hundreds of banquet attendees. The locally made vessels included impasto wares most likely used for the non-elite members of the community, alongside fine wares of kantharoi and kyathoi for entertaining the community’s elites, bearing depictions of the ‘Mistress of Animals’. The fertility divinity grasps or is flanked by pairs of animal familiars including birds and felines, or holds two long braids pulled forward over her shoulder.
An attachable finial fragment that would have been attached to cups of this style was recovered in the form of a lotus palmette, an element of eastern iconography that frequently accompanies images of the fertility deity.
39 Lotus palmettes are included on similar bucchero cups from examples from outside of Poggio Civitate with some examples positioned over the genitalia of the figure, creating a strong association between lotus palmettes and the fertility deity.
40 It is therefore possible that the representation of a lotus palmette may have been understood as a reference to the fertility divinity in other contexts, invoking references to her fertility and fecundity.
41 Two examples also display the goddess in combination with a decorative finial representing a helmeted warrior, linking her through this male companion with martial prowess (
Figure 9).
42 The incorporation of the images of the female fertility deity controlling animals into both the monumental decoration and these small-scale materials reflects the concerns of the elite community members for expressing their aristocratic authority and identity in widespread media.
The decorative program of the structure echoes the message of aristocratic authority from the previous phases, but was re-imagined to suit a more advanced roofing system technique.
43 Gorgon head antefixes were situated at the ends of the terminal cover tiles along the exterior of the building’s roof. A larger decorative plaque featuring a similar gorgon face was affixed to the end of the ridgepole beam.
44 The representation of the Gorgon’s iconography on the roof serves an apotropaic function, protecting the complex from the ‘evil eye’.
45 The interior of the building utilized a lateral sima similar to that found on the Orientalizing Complex, featuring feline waterspouts flanked by rosettes and a female head applique, again a ‘Mistress of Animals’ motif.
Acroteria featuring enthroned human figures, animals, and mythological creatures were attached to the apex of the Archaic building’s roof (
Figure 10).
46 A minimum of 14 human figures, male and female, were placed along the roof, seated on four-legged stools, and with hands posed to hold attributes that no longer survive.
47 The figures preserve trace elements of paint indicating that textile patterns originally decorated the clothing of the figures. At least seven of the male figures wore distinctive peaked hats, earning them the moniker of the “cowboy statues”. There were at least two other male types, one that wore a helmet and one with no headdress. The animal acroteria included horses, boars, rams, and lions, alongside mythological animals including sphinxes, hippocamps, griffons, and a possible centaur.
48 The attachment points of the statues to the ridgepole tiles suggest that the human figures were positioned facing out from the roof, while the animal statues were faced laterally, so that their full profiles would have been visible. The position occupied by the statues on the roof is difficult to definitely determine due to the later destruction of the building. It is possible that the animal figures flanked the human ones along the roof line connecting with the presentation of the Master of Animals flanked by felines along the building’s lateral sima.
Four types of frieze plaques adorned the building and depicted images of elite activities: a competitive horse race, a banquet scene, a procession of seated figures on a two wheeled cart, and a series of seated and standing figures holding attributes of religious and social authority. While a variety of interpretations have been presented for the scenes on the frieze plaques, the current excavators have proposed that the plaques can be read as a sequential scene of an elite marriage.
49 A bride arrives in the procession scene along with her attendants, who carry with them the elements of textile production to set up in her new household, feasts at a celebration of the marriage, witnesses a public spectacle to mark the event, the horserace, and takes her place amongst her new family, who bear formal attributes representing their authority, on the seated and standing figures plaque.
The frieze plaques present not only representations of Etruscan textiles but also reference their manufacture. The banquet frieze plaque presents couples reclining on couches draped with long textiles.
50 Ceramic and butchered bone found throughout both the Orientalizing and Archaic phases evidence that banqueting was practiced at Poggio Civitate
51 and textiles, as represented on the plaque, would have been an important element of these contexts in the form of garments, tents, and coverings. Further, the textile production objects carried by attendants following the two-wheeled cart in the procession frieze plaque demonstrate the social importance of textile manufacture among elites (
Figure 11). The first attendant balances a container on her head that can be interpreted as a cista, which frequently held cleaned and carded wool to be spun into fibers or yarn.
52 The attendant on the right carries an object with two staked, spoked elements, possibly representing a yarn swift, an object which aids in the winding of yarn or the stringing of a loom.
53 The presence of textiles and objects integral to textile production on the decoration of this monumental complex speaks to the central importance that the large-scale production of textiles held in the development and reinforcement not of only elite identity but also of community practices.
54The destruction and erosion of the Archaic Complex has obscured the interior spaces, making it difficult to determine what role the building served. While numerous functions have been suggested, it now seems likely, as stated above, that the Archaic Complex combined the residential, industrial, and production functions of the three separate structures of the Orientalizing Complex and additionally provided the community with a defensible semi-public gathering space.
55 As a whole, the decorative program featuring ancestor figures (acroteria and frieze plaques), the Mistress of the Animals (sima), and gorgoneia (antefixes, plaques) expressed the power of the aristocratic ruling family through its connection to past generations, future procreation, and apotropaically afforded protection to assure the secure passage of power to subsequent generations. The size and elaborate decorative program of the monumental Archaic Complex afforded the members of the elite ruling classes a visible embodiment of their control over local resources and other social classes.
56 Furthermore, these components collectively broadcasted messages of elite identity to other social classes on the hill and in the surrounding satellite communities that fell under the aristocratic control of Poggio Civitate.
The cohesive iconography of the monumental architecture, banquet wares, and rocchetti dispersed across the site suggests that the non-elite craftsmen tasked with creating the monumental decoration were utilizing similar iconographic messages in the creation of moveable objects used for the community activities of banqueting and textile production. That iconography echoing elite messages appears on moveable objects created and used by the non-elites of Poggio Civitate, illustrates their reception and replication of the ideology associated with the aristocratic iconographic tradition.
5. The Role of the Artisans of Poggio Civitate in the Transfer of Elite Iconography to Non-Elite Textile Tools
Non-elite artisans involved in the creation of products utilized for elite activities, such as monumental decoration and ceramic banqueting wares, were also tasked with producing textile tools and their decoration. A locally produced fenestrated finial fragment found on the floor surface of the OC2/Workshop revealed fragments of terracotta within the center of the finial fragment (
Figure 12).
57 The small fragments of terracotta preserved shallow impressions with a sunburst design, indicating that the fenestrations were created by utilizing a stamping tool normally used to place decorative designs on fine wares, impasto wares, and textile production artifacts as a punch to create the fenestrations. The object testifies that craftsmen were likely producing varieties of ceramic wares within the same space and had access to the molds and tools used to add decorative elements, and therefore possessed a role in the creation of the iconography itself.
Mapping the concentrations, mentioned above, of the recovery locations of spindle whorls and loom weights found to date at the site, completed by Cutler et al., has shown that distinct areas across the site were utilized for textile production. The objects are densely concentrated in the area north of the OC2/Workshop, suggesting that a fiber-based workshop functioned at an industrial scale alongside the ceramic, metal, glass, ivory, and animal processing activities taking place within the OC2/Workshop structure.
58 The same distribution pattern is revealed when spindle whorls with a diameter of 1.5 cm or greater are mapped across the site and concentrate in OC2/Workshop. When, however, spindle whorls with a diameter of 1.5 cm or less are mapped they concentrate within the area of OC1/Residence.
59 Whorls of a smaller diameter are better suited for the production of finer threads. This suggests that while thread production was occurring across the site, utilitarian thread was produced by non-elite laborers in the workshop while finer thread was produced within the elite residence, as reflected by the status of these craftworkers emulating the visuals known from the bronze tintinnabulum from the Arsenale Militare necropolis at Bologna, and the Verucchio throne.
60 An additional cluster of textile production objects was recovered in the northern corner of the Archaic Complex. This group of spindle whorls may have been in storage and utilized for periodic production of community textiles, such as used at banquets or religious events.
61 This evidence suggests that the elites controlled access to stored production objects. It is tantalizing to imagine that in this period too it was the elites, likely women as demonstrated by grave goods and visual representations throughout Etruria, resident in the Archaic Complex who produced finer quality textiles and mediated the access of non-elites to these stored tools.
The women responsible for the creation of textiles at Poggio Civitate are frequently not visible in the archaeological record, but a single impasto rocchetto from the site may provide a glimpse in the form of an inscription on the shaft of the object. Four letters form the word
RIXA, an Etruscan word not elsewhere attested (
Figure 13).
62 In contrast to the stamps, the inscription would not be visible while the rocchetto was in use. The linguistic similarity of the word to feminine personal names suggests that this rocchetto preserves the name of an Etruscan woman, potentially the woman who used the tool.
63 While it is not possible to know the extent that Etruscan women possessed the functional literacy to inscribe their name onto the object, it is inviting to imagine that the rocchetto was a personalized object of an Etruscan woman producing textiles for consumption by the community.
In non-elite spaces of production, the use of rocchetti with images that echo those displayed by the monumental architecture indicates that non-elite textile producers sought to replicate the iconography selected by elites into the community, perhaps trying to identify themselves with elite weaving women. This replication is archaeologically visible within a series of poorly preserved domestic structures found to the south and west of the Piano del Tesoro. These structures preserve evidence of domestic production contemporary with at least EPOC4 and the Orientalizing Complex.
64 The significantly thinner walls and smaller interior areas of the structures distinguishes them from elite counterparts.
65 The objects found within the structures evidence daily domestic activities such as quotidian ceramic production, meat processing, and textile production.
66Fifteen spindle whorls and thirty-one rocchetti were recovered from within these light-frame domestic structures, along with one loom weight.
67 The textile production objects indicate the production of coarse thread and textiles; no lighter spindle whorls consistent with those recovered in the OC1/Residence were recovered.
68 Four rocchetti preserve stamped decoration, two decorated with patterns of concentric circles, one with a curving volute vegetal pattern, and one with a striding quadruped.
69 The presence of these artifacts indicates the incorporation of elite iconography into non-elite contexts, illustrating the spread of such images throughout the community. Furthermore, these decorations, though present here in the singular vegetal rocchetto example, represents a broader pattern at the site of elite visual themes, such as those displayed by the monumental architecture, circulating throughout Poggio Civitate’s female population by means of moveable textile production objects.
As objects for textile production have been found in all domestic and public areas of Poggio Civitate, children would have been exposed to the production processes from a young age. As they accompanied caregivers working with family or community members, children learned the technical production processes through watching, interacting, and imitating those at work, both men and women.
70 Limited, direct evidence of this claim is represented by a conical impasto spindle whorl recovered within an Archaic light-framed, non-elite domestic structure located to the southwest of the Archaic complex.
71 The spindle whorl is fluted, which aided in securing the yarn to the whorl during the act of spinning. The wider, perpendicular convex face preserves a series of impressions encircling the central hole that appear to have been made by pressing a fingernail into this surface before firing (
Figure 14). The small size of the impressions suggests that a child may have been responsible for creating the decoration on the surface of the whorl and thus was in attendance for at least a portion of the production process of the object.
While the spindle whorl is not definitive, textile production objects appear as grave goods for children in Italy as young as two to three years old, indicating that children began to learn the specialized skills necessary to produce fibers from a young age.
72 Technical education most likely began with age-appropriate tasks such as spinning or tablet weaving before later learning more physically demanding tasks such as working a warp weighted loom. Exposure to women knowledgeable about the process and the physical body movements was fundamental to learning the techniques of textile working and facilitated a range of social interactions not only between adult artisans and children but also between artisans.
73The social interactions occurring around the production of textiles most likely facilitated elements of social and political education during long sessions of textile production. Mythological and ethnographic evidence point to the recitation of mythological stories during weaving sessions as a possible form of education, entertainment, and a memorization technique for the patterning and physical moments of textile production.
74 A material expression of this education at Poggio Civitate are the rocchetti and their stamped decoration, which were likely encountered by children tasked at a young age with the organizing of threads and small tablet weaves. As children learned how to use the tools necessary to create textiles, they very likely learned the meaning of the decoration they possessed.
It is inviting to imagine that the iconography of the rocchetti and their echoing of the aristocratic messages presented on the monumental architecture of the site played an important role in the local political education for the members of the community of all social classes and age groups. The spread of motifs through elite and non-elite contexts reinforced the identity of the elite members of the community but also reinforced the social formation resulting from the established aristocracy. The non-elite employment of elite iconography on small-scale, moveable, and quotidian objects asserted their inclusion in the community and their relationship to the monumental spaces that displayed community values, such as the emphasis on fertility and proliferation.