Next Article in Journal
Design and Implementation of Quad-Port MIMO Antenna with Dual-Band Elimination Characteristics for Ultra-Wideband Applications
Next Article in Special Issue
Comparison between Design Formulations and Numerical Results for In-Plane FRCM-Strengthened Masonry Walls
Previous Article in Journal
Cancer Stem Cell Target Labeling and Efficient Growth Inhibition of CD133 and PD-L1 Monoclonal Antibodies Double Conjugated with Luminescent Rare-Earth Tb3+ Nanorods
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Durability of Fabric-Reinforced Cementitious Matrix (FRCM) Composites: A Review

by
Karrar Al-Lami
1,2,
Tommaso D’Antino
1 and
Pierluigi Colombi
1,*
1
ABC Department of Architecture, Built Environment and Construction Engineering, Politecnico di Milano, 20133 Milan, Italy
2
Civil Engineering Department, University of Wasit, Al-Rabee st, Wasit 00964, Iraq
*
Author to whom correspondence should be addressed.
Appl. Sci. 2020, 10(5), 1714; https://doi.org/10.3390/app10051714
Submission received: 15 January 2020 / Revised: 24 February 2020 / Accepted: 27 February 2020 / Published: 2 March 2020

Abstract

Strengthening and rehabilitation of masonry and concrete structures by means of externally bonded fabric-reinforced cementitious matrix (FRCM) (also referred to as textile reinforced mortar (TRM)) composites was proposed as an alternative to the use of fiber-reinforced polymer (FRP) composites due to their good mechanical properties and compatibility with the substrate. However, quite limited studies are available in the literature regarding the long-term behavior of FRCM composites with respect to different environmental conditions. This paper presents a thorough review of the available researches on the long-term behavior of FRCM composites. Namely, (i) test set-ups employed to study the FRCM durability, (ii) conditioning environments adopted, and (iii) long-term performance of FRCM and its component materials (mortar and fiber textile) subjected to direct tensile and bond tests, are presented and discussed. Based on the available results, some open issues that need to be covered in future studies are pointed out.
Keywords: fabric-reinforced cementitious matrix (FRCM); textile reinforced concrete (TRC); textile reinforced mortar (TRM); inorganic-matrix; open-mesh textile; long-term behavior fabric-reinforced cementitious matrix (FRCM); textile reinforced concrete (TRC); textile reinforced mortar (TRM); inorganic-matrix; open-mesh textile; long-term behavior

Share and Cite

MDPI and ACS Style

Al-Lami, K.; D’Antino, T.; Colombi, P. Durability of Fabric-Reinforced Cementitious Matrix (FRCM) Composites: A Review. Appl. Sci. 2020, 10, 1714. https://doi.org/10.3390/app10051714

AMA Style

Al-Lami K, D’Antino T, Colombi P. Durability of Fabric-Reinforced Cementitious Matrix (FRCM) Composites: A Review. Applied Sciences. 2020; 10(5):1714. https://doi.org/10.3390/app10051714

Chicago/Turabian Style

Al-Lami, Karrar, Tommaso D’Antino, and Pierluigi Colombi. 2020. "Durability of Fabric-Reinforced Cementitious Matrix (FRCM) Composites: A Review" Applied Sciences 10, no. 5: 1714. https://doi.org/10.3390/app10051714

APA Style

Al-Lami, K., D’Antino, T., & Colombi, P. (2020). Durability of Fabric-Reinforced Cementitious Matrix (FRCM) Composites: A Review. Applied Sciences, 10(5), 1714. https://doi.org/10.3390/app10051714

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop