Next Article in Journal
A Nested Chinese Restaurant Topic Model for Short Texts with Document Embeddings
Next Article in Special Issue
Mirau-Based CSI with Oscillating Reference Mirror for Vibration Compensation in In-Process Applications
Previous Article in Journal
Litholytic Activities of Natural Bioactive Compounds and Their Mechanism Insights
Previous Article in Special Issue
In-Situ Evaluation of the Pitch of a Reflective-Type Scale Grating by Using a Mode-Locked Femtosecond Laser
 
 
Article
Peer-Review Record

Automated Detection of Premature Flow Transitions on Wind Turbine Blades Using Model-Based Algorithms

Appl. Sci. 2021, 11(18), 8700; https://doi.org/10.3390/app11188700
by Ann-Marie Parrey *, Daniel Gleichauf, Michael Sorg and Andreas Fischer
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Appl. Sci. 2021, 11(18), 8700; https://doi.org/10.3390/app11188700
Submission received: 7 August 2021 / Revised: 13 September 2021 / Accepted: 14 September 2021 / Published: 18 September 2021
(This article belongs to the Special Issue Optical In-Process Measurement Systems)

Round 1

Reviewer 1 Report

Minor addition required

  1. The paper talks about finding wedge templates. Need to elaborate if these templates are generated at identical atmospheric conditions (standard temperature and pressure).

Author Response

Please see the attachment.

Author Response File: Author Response.docx

Reviewer 2 Report

Line 124. Remove "Therefore".

Line 207-209. Can the authors justify and/or give a literature refernce for the selection of 0.1 as threshold value?

Line 279. Again, can the authors describe from where the empirical value of 35% comes from? If it has been derived from previous experience can they show how it was calculated?

Figure 4b. It is possible to insert a legend correlating the line color to the exact value of the template size?

Line 360-361. Please insert  a reference to investigation on h/w ratio and the relative applicability to the case explored in this study 

Author Response

Please see the attachment.

Author Response File: Author Response.docx

Back to TopTop