1. Introduction
Photovoltaic (PV) systems are a remarkable breakthrough that dazzle with their unparalleled benefits. The energy harnessed by these systems is devoid of any pernicious pollutants and does not impinge on natural resources or threaten the well-being of living beings. In addition, the noiseless and highly reliable PVs are entirely self-sufficient, requiring only nominal maintenance costs [
1]. It is no wonder that solar PVs are considered a preeminent source of clean energy, and their prevalence continues to rise because of their groundbreaking advances in both technology and marketability. These strides include an impressive array of cell types, PV efficiency, and electronic capabilities that elevate their prominence and secure their position as a pinnacle of modern technology [
2].
Although photovoltaic systems offer a multitude of benefits, it should be noted that their output is subject to fluctuations that are dependent on several factors, including prevailing outdoor conditions such as solar irradiance and temperature, as well as the characteristics of the PV modules, such as photovoltaic cell temperature and connected load [
3]. To ensure optimal performance, the connected load must operate at a specific juncture, known as the maximum power point (MPP), where the PV produces the maximum power output. This feat is accomplished by accurately correlating the PV’s characteristics with the environmental variables to achieve maximum point power tracking (MPPT).
The exhaustive testing of all commercially available PV models under different environmental conditions is an arduous and cost-intensive task. Consequently, researchers have exploited mathematical and physical models to simulate, estimate, and forecast the PV’s electrical characteristics based on diverse parameters [
4]. The most commonly used models are lumped parameter models with varying numbers of diodes. The single-diode model of the PV cell reigns supreme as the most prevalent model employed today [
5]. However, determining the current–voltage correlation of the single-diode photovoltaic is an intricate process that involves solving complex transcendental and nonlinear equations, rendering it a laborious undertaking.
Establishing all pertinent parameters is imperative to accurately model a single-diode photovoltaic model [
6]. However, not all parameters and specifications are readily available in the manufacturer’s manual. While data regarding voltage at MPP (
), open circuit voltage (
), current at MPP (
), and short circuit current (
) are commonly provided, other critical PV parameters, such as diode ideality factor (
a), parallel resistance (
), reverse saturation current (
), and photogenerated current (
), may not be easily obtained [
6]. Consequently, estimation or modeling using alternative means becomes necessary to determine these unknown parameters. Given the complexity of the process, accurately modeling PV characteristics is essential to ensuring model robustness and reliability.
Estimating photovoltaic parameters is a multifaceted endeavor that relies on diverse numerical, statistical, analytical, and intelligent techniques. Although numerical models rely solely on manufacturer-provided data to estimate PV parameters, analytical and statistical approaches utilize complex non-linear equations to estimate the I–V curve parameters [
7]. Intelligent models leverage meta-heuristic algorithms to extract PV parameters, making use of sophisticated techniques to tackle the challenge of PV modeling [
8]. Indeed, the extensive literature [
9] on extracting PV parameters attests to the formidable nature of this task.
From the perspective of PV estimation, the paramount and pivotal factors are PV modeling and its parameters, as well as the MPPT. In addition, it is crucial to ensure the uninterrupted and continuous functioning of photovoltaics. Integrating all PV parameters and methods to estimate the I–V curve, while also providing techniques for error handling, is a challenging task. The complexity further increases when using fusion and hybrid methods to ensure that the PV modeling output closely approximates the actual PV output, which is essential for optimizing the power process and, subsequently, error handling.
In light of the challenges and concerns mentioned above, this paper proposes a novel approach to address the modeling and optimization of single-diode photovoltaic systems. Specifically, an analytical method is employed to model the photovoltaic system, while a state-of-the-art genetic algorithm is utilized to estimate the electric parameters of the system. The resulting real-time values of
,
, and
are then compared to the predicted values obtained from the genetic algorithm (
,
, and
), which provides a means of identifying potential malfunctions or errors in the PV system or its sensing devices. By notifying the end-user of any significant deviations between the predicted and actual values, appropriate actions can be taken to prevent further issues and ensure the smooth and continuous operation of the photovoltaic system [
10]. Overall, this approach holds great promise for addressing the challenges associated with accurate PV modeling and error handling in single-diode photovoltaic systems while eliminating the integration of complex IoT systems [
11].
Recent studies and advancements in PV modeling have indicated that, for the specific task of estimating the I–V curve and optimizing the power process, the inclusion of certain parameters (e.g., air humidity, wind direction, wind speed) may not yield a significant improvement in accuracy [
12]. The selected PV modeling method, while simplified in its consideration of operating conditions, has been validated against real-world data, demonstrating high accuracy and reliability [
12]. Moreover, the decision to limit the number of parameters considered in the model is also pragmatic. By focusing on essential factors, the complexity of the model is reduced while minimizing associated costs. Additional parameters would require more sophisticated sensing devices and potentially lead to increased expenses in both installation and maintenance for real-time conditions.
Within this context, the proposed method holds profound significance in the field of PV systems by introducing a novel approach to real-time monitoring and error detection. The fundamental concept revolves around the premise that, under optimal conditions, the PV modeling outputs, which estimate the electricity generation (represented by , , and ), should closely align with the actual measurements of the PV system’s performance (, , and ). Any substantial deviation between these two sets of values indicates the potential occurrence of errors or malfunctions within the PV system or its sensing devices. Exploiting a GA for parameter estimation, the method enables accurate and low-cost real-time monitoring of PV operations. This not only ensures the flawless functionality of the PV system but also provides a proactive mechanism for identifying and addressing issues promptly, thereby maximizing the overall efficiency and reliability of the photovoltaic installation.
The contributions and novelty of this paper can be summarized as follows:
Development of a novel genetic algorithm for MPP optimization in single-diode photovoltaic systems.
Integration of the Lambert function into the optimization function of the genetic algorithm to ensure PV constraints are met.
Implementation of a real-time PV error detection system to detect and notify the end-user of any potential malfunction or deviation between real and predicted PV values.
In the subsequent sections of this paper, a comprehensive analysis of photovoltaic (PV) output power estimation and fault diagnosis is presented.
Section 2 addresses the extensive research conducted in this field, highlighting its significance in the renewable energy domain. In
Section 3, a detailed examination of the various methodologies utilized for PV modeling, MPP optimization, and PV error handling is provided. The ensuing section,
Section 4, showcases the outcomes of the aforementioned methodologies. Finally, the paper ends with a discussion and conclusive section encapsulating the key takeaways and insights gleaned from the research conducted.
2. Related Work
A model that can estimate, simulate, or predict a single-diode PV’s energy production must be accurate and efficient while monitoring the MPPT. PV models consist of non-linear characteristics between current (I) and voltage (V). It is of ultimate importance to minimize errors when estimating the I–V curve. The higher the estimation, the better the model. Notwithstanding, even if the PV modeling is accurate, there are many other errors that might occur with the PV systems. The PV system fails due to abnormal module power operation, sensor problems, and other issues. Tracking those errors and reporting them to stakeholders is crucial for a continuous PV operation.
As presented in the work of [
13], to accurately predict the output of a PV, the estimation must be associated with outdoor environmental parameters. Weather data were periodically retrieved (i.e., every 5 min) for two years. The selected outdoor values monitored are ambient temperature (
), relative humidity (
), wind speed (
), and global horizontal irradiance (
). Moreover, the respective PV parameters were monitored for the same time interval and period of time and are the maximum PV power output (
), the temperature of the PV modules (
), and the plane of array irradiance (
).
was correlated with all the weather variables to indicate their association. The lowest error was produced when the model consisted of
,
, and
. Therefore, it is suggested to forecast PV power using those variables.
According to [
14], the MPPT may be estimated through the curve of the solar array by comparing power (P) and static conductance (G). Their model generates fluctuating power and is compared to the PV’s array of actual instantaneous power. The error produced is used to modify the static conductance while reaching the MPP. Moreover, the generated error is applied to change the power reference until it attains a limit cycle near the MPP. Their model ensures that the MPPT operates accurately between 10% and 100% nominal power. As stated in [
15], to estimate the PV parameters for better PV accuracy, the proper circuit model must be indicated. A flexible particle swarm optimization (FPSO) algorithm is exploited. The FPSO’s ordinary movement is altered to boost its accuracy. The FPSO is compared to many other widely used algorithms, like the bird mating optimizer and particle swarm optimization. As stated above, the non-linear characteristics of the PV cells result in a continuous fluctuation of their values. Consequently, the proper modeling of the PV and its parameters is of key importance.
As addressed in the work of [
16], it is crucial that the PV’s operations be continuous without faults or disruptions. The MPPT enhances the efficiency of the modules through DC–DC power optimizers. However, there are still many errors that might occur to the PV systems, like single component failure and plants out of service. As a result, PV auditing and monitoring are essential for diagnostic and maintenance purposes. PV monitoring is deployed through a day-ahead PV output prediction while faults are diagnosed. Moreover, a thorough examination is applied to the PV forecast through its performance indexes. In [
17], it is reported that the I–V and P–V parameters and characteristics of a single-diode model affect the PV’s operation. The authors divide the voltage and PV current output through an intermediate parameter. They simulate the PV’s operation and analyze how each parameter affects the PV output and the error degree. The decomposition of voltage and current in the I–V simplifies the estimation of PV parameters while demonstrating the effect on MPP.
As far as monitoring PV techniques are concerned in [
18], a novel method for smoothing photovoltaic power fluctuations using a hybrid storage system and optimized charging/discharging cycles is presented. The approach incorporates machine learning-based PV failure detection, reducing supercapacitor operation and computation time compared to traditional methods, as validated in experiments. In [
19], the application of remote sensing (RS) technology in various stages of solar PV system development is explored, including potential estimation, array detection, fault monitoring, and cross-cutting areas. The comprehensive review highlights RS as a crucial tool for effective resource assessment, data analysis, and health monitoring, offering valuable support for PV system planning, management, and decision-making. Finally, in [
20], a real-time fault detection and performance monitoring system for PV systems is presented. Using various sensors, the system identifies issues such as encapsulation failure and module corrosion. It employs a one-diode model, Python software, and a database generated from field testing to detect faults, providing users with easy-to-understand error messages and remote access for efficient PV system management and maintenance.
Based on all the above, it may be observed that, while significant progress has been made in modeling and monitoring single-diode PV systems, there remains a notable research gap concerning the integration of accurate parameter estimation, real-time error detection, and efficient MPPT mechanisms. The existing literature has predominantly focused on individual aspects, such as parameter estimation techniques, environmental parameter correlations, and fault detection systems. However, there is a need for a holistic approach that combines these elements to enhance the robustness and reliability of PV models. This paper aims to bridge this research gap by proposing a comprehensive methodology. The objectives include the development of a novel genetic algorithm for accurate MPPT optimization, the integration of the Lambert function to ensure adherence to PV constraints, and the implementation of a real-time error detection system. The proposed approach seeks to address the challenges associated with accurate modeling and error handling in single-diode PV systems, offering a more complete and effective solution for continuous and fault-free PV operation.
4. Results
In this section, the results of the proposed method are presented. Initially, the performance and accuracy of the proposed GA applied to model single-diode PV systems under various illuminance conditions are addressed. The PV parameters used in the experiments are outlined, and the sensors and meters used are presented while detailing the overall procedure that involves measuring real PV values, expected MPP values through the GA, and the subsequent comparison. The GA’s accuracy is investigated by altering parameters affecting PV output, such as temperature and irradiance. Additionally, the GA’s key hyperparameters, including population size, number of generations, crossover and mutation probabilities, are thoroughly tested to optimize its performance. The accuracy and efficiency of the GA are further compared with other optimization algorithms, showcasing the GA’s efficacy in solving complex PV optimization problems. The results highlight the GA’s ability to provide accurate predictions and its suitability for real-time PV monitoring and optimization, making it a valuable tool for practical applications.
4.1. Experimental Set Up
In this experimental set-up, diverse illuminance conditions were applied to assess the performance of PV systems, with the parameters of the utilized PVs detailed in
Table 4. The table provides a comprehensive overview of critical PV parameters essential for accurate modeling and optimization. The experiment’s focus is on understanding how the PVs respond to varying illuminance levels, shedding light on their efficiency and robustness under different environmental scenarios. By systematically varying illuminance conditions, the study aims to capture the nuanced behavior of the PV systems and evaluate their real-world adaptability. The parameters outlined in
Table 4, such as the diode ideality factor (
n), series resistance (
), and photogenerated current (
), play pivotal roles in determining the system’s response to changing illuminance. The ensuing analysis and results will provide valuable insights into the dynamic behavior of PV systems, contributing to a broader understanding of their performance in varying environmental contexts.
Sensors and Meters
The comprehensive modeling procedure involves acquiring crucial measurements from an array of devices, meters, and sensors to accurately assess the performance of PV systems. The key objective is to identify potential errors in PV operations by comparing real PV values with the expected MPP values. Real PV values are determined through the utilization of meters and MPPT, while the expected PV values are estimated using a genetic algorithm.
For an accurate simulation of PV system operation, the GA relies on input values from various outdoor sensors and PV modeling. These inputs include temperature measurements obtained through type J thermocouples [
36] attached to the PV collectors, providing insights into temperature variations during operation. Additionally, an optical sensor [
37] is employed to simultaneously monitor the brightness of the surrounding area, contributing to a comprehensive understanding of the environmental conditions affecting PV performance. A pyrometer sensor is incorporated to measure solar radiation, offering reliable data on solar energy incidence.
Simultaneously, the monitoring system utilizes a multimeter to track the voltage and current values of the PV collectors, providing real-time data on electrical parameters. Simultaneously, a wattmeter is employed to monitor the power produced by the solar cells, offering insights into the overall energy generation of the PV system. To convert analog signals into digital values for precise measurements, an analog-to-digital converter (ADC) is employed, facilitating the retrieval of accurate and digitized data. The final digital outputs include the actual electric qualities, namely (voltage), (current), and power , forming the basis for the subsequent analysis and comparison with the expected values generated by the genetic algorithm. This meticulous data acquisition process ensures a comprehensive and accurate assessment of the PV system’s real-time performance and aids in the identification of any deviations or errors in its operation.
4.2. Genetic Algorithm Tests
In this section, the focus is on the comprehensive exploration of GA tests and their impact on the modeling accuracy of PV systems under various conditions. The population size and number of generations, pivotal parameters in GAs, are investigated to optimize convergence and computational efficiency. Results from performance tests will present the influence of these parameters on the GA’s execution time and convergence ability. Additionally, the critical selection of crossover and mutation probabilities is addressed through experimental tests, revealing their relationship and impact on the algorithm’s performance. This analysis will lead to the identification of an optimal combination of hyperparameters for the GA crossover probability. Subsequently, the accuracy of the GA is thoroughly examined through tests where irradiance and temperature variations are introduced.
4.2.1. Population Size and Number of Generations
The selection of the population size is a crucial process for the GA because it directly influences the convergence of the algorithm [
38]. As a result, population size has an impact on the GA’s ability to reach the optimal solution [
39]. According to the findings in the literature, a small population mars the quality of chromosomes, and a large population size (i.e., more than 100) is only a computational waste [
40]. Nonetheless, to determine the appropriate population and the number of generations (iteration times), tests were carried out, as shown in
Table 5. The crossover probability was set to 0.75, and the mutation probability was set to 0.01, as suggested in the literature [
41]. It could be suggested that the experiments indicate that a population size of 60 is efficient for the GA. Furthermore, a small generation number will maintain the quality of the solutions and keep the execution time rather low.
Some experiments have been conducted to measure the computational difficulty of the algorithm and to associate some of the genetic hyperparameters (population size and generations) with the execution time while keeping crossover and mutation probabilities intact. According to
Table 5, and observing how the execution time varies as the population and generations increase, it can be observed that the execution time is linearly proportional to the size of the population. Moreover, the slope of the straight lines in
Figure 9 indicates that the execution time is also linearly proportional to the number of generations. Combining the impact of those two hyperparameters on the execution time and considering that the genetic algorithm is heuristic and crossover/mutation operators occur at nearly the same time, the algorithm has a complexity of
.
As depicted in
Figure 9, there is an observable relationship between the population size and the execution time of the GA. Furthermore, there is also a proportional relationship between execution time, generation size, and population size. Regarding the tests developed, the aforementioned relationships are estimated by the following:
where
x is the population size and
y is the execution time in seconds, where
correspond to generation sizes 10, 20, 30, 40, respectively.
4.2.2. Crossover and Mutation Probability
The crossover probability and the mutation probability are also very important parameters for the GA [
30]. They should be selected after a trial phase where various combinations must be tested. The proposed GA was tested for many combinations. The results are presented in
Figure 10, the two red lines indicate the lowest value of the objective function and the value of the fitness function when the algorithm stops. When there is one line, the GA converges to the minimal point.
To start with, two rather rare combinations were selected where crossover probability and mutation were equal and set to 0.5 and 1.0. In the first case, it is observed that the GA does not converge until generation 100, and the algorithm often has high picks. This is due to the high rate of both selected probabilities. In the second case, where the probabilities are set to 1.0, it may be observed that the algorithm seems to be mixed up and going all over the search space.
Subsequently, to test the effect of the crossover probability on the GA, the mutation probability is kept fixed and equal to
. As it may be observed in
Figure 11, the GA never converges with a high mutation probability, regardless of the
value. The GA had sharp fluctuations during the 100-generation deployment. It is suggested that a high rate of mutation disorganizes the GA.
Moreover, to test the effect of the mutation probability on the GA, the crossover is kept fixed and equal to
. In contrast to the previous case where the
was high, when the
is high, the GA generally performs better (
Figure 12). Furthermore, the lower the
, the better. A
greater than 0.05 starts to deteriorate the GA’s ability to converge to the optimal solution.
To sum up, the best performance of the suggested GA is observed when and . Therefore, this is the combination that is used for the GA because it ensures that the GA will find the best solution while quickly converging.
4.3. GA Accuracy
After specifying the crossover and mutation probability and setting the decimal precision to two, some experiments have been performed to measure the accuracy of the genetic algorithm. Specifically, by modifying the parameters that mostly contribute to the PV output (temperature and irradiance), the genetic algorithm was executed and the predicted values of the electric quantities were compared to the real ones, as measured by the meters. Holding irradiance at a constant value and modifying temperature, three tables of results were formed for three different values of irradiance, namely (
, 500, 1000). The results can be easily depicted in
Table 6,
Table 7,
Table 8 and
Table 9. In most cases, the genetic algorithm is more than 98% accurate.
It is worth mentioning that, in
Table 6, for a low irradiance value (
), it can be easily observed that, as temperature increases, the accuracy of the algorithms decreases. In particular, when the temperature equates
, the real value diverges from the predicted one by
. That noticeable deviation between the real and predicted values is not attributed to the genetic algorithm but to the PV modeling. PV parameters depend on temperature and irradiance but are usually not taken into account in the equations to simplify the modeling process, leading to less accurate solutions when irradiance or temperature diverge a lot from the standard conditions. Various PV modeling methods are proposed in [
25].
On the contrary, in
Table 7, when the irradiance value (500 W/m
) is closer to that of the standard conditions, better results were obtained, while the precision in every quantity of electrics does not fall below 96%. Similar results can be illustrated in
Table 7, where accuracy remains above
. Due to the fact that electric quantities (voltage and current) can be predicted with an error less than
, except for cases of extreme values of irradiance and temperature, an error could be raised when real and predicted values diverge more than
. It should also be remembered that, with more analytical and detailed PV modeling, the genetic algorithm could yield better results, even in extreme cases.
4.4. PV Error Generation
The end-user can be informed of the PV’s state from the real-time analytics platform implemented to provide valuable information about the PVs. In particular, beyond other crucial and informative visualizations, the end-user also has the ability to constantly view the real-time ground truth and predicted values of the electric quantities and check if any abnormal activity is observable. Two different cases of normal and abnormal PV activity can be illustrated in
Figure 13 and
Figure 14, respectively. It should also be mentioned that, in cases of abnormal activity, pop-up notifications also appear on the user’s screen.
4.5. Comparing Proposed Fitness Function with MPC-Based Methods
It has been proposed that MPC-based MPPT algorithms are of high accuracy and robustness [
30]. With this technique, the MPPT is tracked by correcting V and I values until
. Exploiting the Lambert function and finding I(V), as in (
21), the above equation can be reformed and is illustrated as
Using the above (
25), a fitness function to find the MPP was formed and is expressed as follows:
The genetic algorithm was also tested with the above fitness function, and there were no substantial deviations between the results using the fitness function defined in (
22). However,
should be calculated, making the above fitness function much more complex than the proposed solution in this paper. Speaking of complexity,
can be calculated using the Lambert function and (
21), as follows:
To summarize, the solution proposed in this paper is not only less complex than other solutions to track the MPP, but the genetic algorithm also offers the flexibility to use another technique (e.g., MPC, as above) by modifying the fitness function.
4.6. Genetic Algorithm Performance Test Compared with Other Optimization Algorithms
There are a multitude of numerical optimization algorithms in the literature that perform in various ways [
42]. Their performance varies depending on their formulation (e.g., convergence velocity, optimum perception, constraint handling). There are three main categories of optimization algorithms: evolutionary algorithms, gradient-based algorithms, and non-gradient-based algorithms [
43]. During the design process of a problem, the appropriate algorithm must be selected to formulate a plausible solution. The meticulous choice of the optimization algorithm is critical for the robustness of every problem-solving process. As a result, the created genetic algorithm (i.e., evolutionary) is compared to two other algorithms belonging to the other categories and one belonging to the same category.
The first one is a gradient-based algorithm, sequential least squares programming (SLSQP) [
44]. SLSQP exploits the Han–Powell quasi-Newton method with an update of the B-matrix [
44]. It is a commonly used algorithm that handles problem constraints with efficacy. The other one is a non-gradient-based algorithm, COBYLA [
45]. COBYLA does not account for bounds and is a non-derivative optimizer [
45]. Therefore, the created GA will be examined both with a gradient and with a non-gradient algorithm using the boundary constraints of the PV configuration. As far as the evolutionary algorithm is concerned, in 2020, Ravipudi Venkata Rao proposed the Rao algorithms (i.e., Rao-1, Rao-2, Rao-3), which are metaphor-free optimization methods using best/worst solutions and random interactions for quick convergence [
46]. They require only two parameters—population size and maximum evaluations—streamlining the tuning process by omitting complex parameters from previous metaphor-based approaches. All the algorithms are tested for their performance compared to real PV values and the same input parameters (i.e., irradiance, temperature). Moreover, two ways of handling constraints are compared: the one used by GA exploiting the Lambert function, and the other used by SLSQP, COBYLA, and Rao (1, 2, 3), which uses the domain of (
4).
The comparison results in
Table 8,
Table 9,
Table 10 and
Table 11 reveal that the GA, SLSQP, and COBYLA algorithms yield nearly identical results across different temperatures and output parameters. This uniformity underscores the accuracy of the constraint handling, particularly the use of the Lambert function in the GA. Despite the algorithms’ similar performance, the GA stands out as a preferable choice due to its configurability. The GA offers more flexibility in selecting various objective functions and constraints, providing adaptability to solve a unique problem. This versatility in configuration is a significant advantage, allowing the GA to address a wide range of optimization scenarios effectively. As for the time required for each algorithm to achieve convergence, the results indicate that the GA consistently demonstrates a slightly more efficient convergence across varying temperatures (0 °C, 25 °C, and 50 °C) compared to the SLSQP, Cobyla, and Rao-1, Rao-2, and Rao-3 algorithms. The advantage of the GA in convergence time suggests its robust performance in optimizing the given parameters, highlighting its potential as an effective optimization method for the specified conditions.
Furthermore, the GA’s ease of application becomes evident in comparison to model predictive control techniques [
47]. The GA’s straightforward implementation and ability to handle diverse problem formulations make it a practical and accessible choice for optimization tasks in this context. In contrast to the Rao algorithms, the GA consistently demonstrates slightly better performance across all tested conditions. This superiority, combined with the GA’s configurability and ease of use, positions it as the method of choice for optimizing the given system.
4.7. Results and Discussion
The proposed methodology combines advanced computational techniques, experimental measurements, and error-handling strategies to model and optimize photovoltaic (PV) systems. The integration of a GA with a single-diode model forms the basis of the modeling approach. The ensuing discussion delineates the key aspects and implications of this methodology.
The utilization of a GA involves a meticulous examination of its performance and sensitivity to various parameters. The GA’s efficacy is contingent upon optimal hyperparameter tuning, particularly concerning population size, generation number, crossover probability, and mutation probability. The comprehensive error handling and validation procedure establishes a robust mechanism for comparing predicted and actual PV system outputs. The integration of a predefined error constant facilitates a quantitative assessment of the algorithm’s performance. The discussion on the error-handling algorithm emphasizes its utility in identifying discrepancies and guiding further refinement of the genetic algorithm.
The integrated procedure, harmonizing GA predictions with actual measurements, offers a holistic perspective on PV system modeling. The step-by-step approach, encompassing sensor data, GA predictions, and metered values, ensures a comprehensive evaluation. The methodology’s practical implications lie in its ability to not only optimize PV system performance but also provide a systematic framework for continuous improvement.
While the proposed methodology exhibits promising results, it is not without limitations. The simplified single-diode model may introduce inaccuracies, especially in extreme conditions. Future research could explore more intricate PV models to enhance accuracy. Additionally, the sensitivity of the GA to initial conditions warrants further investigation for robust real-world applicability.
5. Conclusions
In this paper, a novel evolutionary algorithm has been presented for real-time PV power optimization, introducing a comprehensive system that monitors and maintains the health of PV installations. The system provides a holistic overview of outdoor environmental conditions, continuously monitors PV voltage, power, and current, and predicts PV values in real time. Alerts and notifications are sent to stakeholders and end-users, enhancing the practical utility of the system.
The power optimization process underwent a thorough analysis, leading to the development of a finely tuned GA. Through a systematic trial-and-error phase, optimal GA parameters were determined—, , and a population size of 60—resulting in a remarkable accuracy exceeding 98% when compared to actual PV values. This underscores the effectiveness of the proposed GA in optimizing PV power output.
To ensure the operational integrity of PV modules or arrays, a robust comparison between actual and predicted voltage and current was implemented. The proposed error-handling procedure demonstrated efficiency during experimentation, promptly alerting end-users to potential PV malfunctions. A comparative analysis with other algorithms affirmed the accuracy of the genetic algorithm, boasting a 99% success rate and offering flexibility in parameter configuration.
Looking ahead, future work will involve the comprehensive testing of additional PV parameters and diverse outdoor conditions to further enhance system efficiency. The refinement and analysis of the PV modeling approach will be prioritized to ensure the accuracy of PV error handling. Exploring alternative PV modeling techniques and conducting user satisfaction research will contribute to continual improvements, ensuring the system’s effectiveness and enhancing the user experience.