Next Article in Journal
Enhancing a You Only Look Once-Plated Detector via Auxiliary Textual Coding for Multi-Scale Rotating Remote Sensing Objects in Transportation Monitoring Applications
Previous Article in Journal
Imbalanced Data Parameter Optimization of Convolutional Neural Networks Based on Analysis of Variance
Previous Article in Special Issue
Semantic Kansei Engineering Approach for Game Controllers and Design Improvement
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Califano et al. Critical Ergonomics and (Dis)Comfort Factors While Performing Tasks with Hand Tools on a Ladder: A Pilot Study. Appl. Sci. 2024, 14, 2398

Department of Industrial Engineering, University of Salerno, 84084 Salerno, Italy
*
Author to whom correspondence should be addressed.
Appl. Sci. 2024, 14(19), 9073; https://doi.org/10.3390/app14199073
Submission received: 26 April 2024 / Accepted: 3 July 2024 / Published: 8 October 2024
(This article belongs to the Special Issue Advances in Manufacturing Ergonomics)
In the original publication [1], there was a mistake in Table 9 as published. Table 9 appeared the same as Table 7. The corrected Table 9 appears below.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Califano, R.; Auricchio, A.; Carbone, M.; Dessì, L.; Frasci, V.; Landi, A.; Naddeo, A. Critical Ergonomics and (Dis)Comfort Factors While Performing Tasks with Hand Tools on a Ladder: A Pilot Study. Appl. Sci. 2024, 14, 2398. [Google Scholar] [CrossRef]
Table 9. Frontal object picking Spearman coefficients.
Table 9. Frontal object picking Spearman coefficients.
Frontal Object Picking
Correlation
Perceived DiscomfortEffort
Needed Perceived
Right arm0.568 **0.589 **
Left arm0.567 **0.509 **
Right forearm0.508 **0.394 *
Left forearm0.405 *-
Neck0.574 **0.523 **
Right knee0.523 **0.460 *
Left knee0.574 **0.460 *
Upper back0.533 **0.473 *
Lower back0.516 **0.402 *
Perceived Discomfort10.676 **
CaMan global−0.676 **-
** The correlation is significant at level 0.01 (2-queues) * The correlation is significant at level 0.05 (2-queues).
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Califano, R.; Auricchio, A.; Carbone, M.; Dessì, L.; Frasci, V.; Landi, A.; Naddeo, A. Correction: Califano et al. Critical Ergonomics and (Dis)Comfort Factors While Performing Tasks with Hand Tools on a Ladder: A Pilot Study. Appl. Sci. 2024, 14, 2398. Appl. Sci. 2024, 14, 9073. https://doi.org/10.3390/app14199073

AMA Style

Califano R, Auricchio A, Carbone M, Dessì L, Frasci V, Landi A, Naddeo A. Correction: Califano et al. Critical Ergonomics and (Dis)Comfort Factors While Performing Tasks with Hand Tools on a Ladder: A Pilot Study. Appl. Sci. 2024, 14, 2398. Applied Sciences. 2024; 14(19):9073. https://doi.org/10.3390/app14199073

Chicago/Turabian Style

Califano, Rosaria, Antonio Auricchio, Mario Carbone, Lucio Dessì, Valentino Frasci, Angelo Landi, and Alessandro Naddeo. 2024. "Correction: Califano et al. Critical Ergonomics and (Dis)Comfort Factors While Performing Tasks with Hand Tools on a Ladder: A Pilot Study. Appl. Sci. 2024, 14, 2398" Applied Sciences 14, no. 19: 9073. https://doi.org/10.3390/app14199073

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop