Skip to Content
You are currently on the new version of our website. Access the old version .
NanomaterialsNanomaterials
  • Article
  • Open Access

28 November 2023

16 Pages

Polypyrrole Solid-State Supercapacitors Drawn on Paper

,
,
,
,
,
,
and
1
Department of Engineering, University of Messina, 98166 Messina, Italy
2
Department of Mathematical and Computational Sciences, Physical Science and Earth Science, University of Messina, 98166 Messina, Italy
3
Department of Physics, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy
*
Author to whom correspondence should be addressed.

Abstract

Solid-state supercapacitors with areal capacitance in the order of 100 mF⋅cm−2 are developed on paper substrates, using eco-friendly, low-cost materials and a simple technology. The electrochemically active material used as the electrode is prepared from a stable water-based ink, obtained by doping commercial polypyrrole (PPY) powder with dodecylbenzene sulfonic acid (DBSA), and characterized by optical and electrical measurements, Raman investigation and Atomic Force Microscopy. The PPY:DBSA ink can be directly applied on paper by means of rechargeable water pens, obtaining, after drying, electrically conducting solid state tracks. The PPY:DBSA layers are then interfaced to one another through a polymer gel based on potassium hydroxide and chitosan, acting both as the ion-conducting medium and as the separator. The areal capacitance of the devices developed by following such a simple rule can be improved when the PPY:DBSA ink is applied in combination with other nanostructured carbon material.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.