In the original publication [1], there was a mistake in Figure 6 as published. At the proofreading stage, an incomplete Figure 6a was accidentally inserted in the manuscript. The corrected Figure 6 appears below. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Figure 6.
XRD patterns of the dried reaction mixtures after the green synthesis (a) and as-milled powders after the mechanochemical synthesis (b) using the four highest lavender:AgNO3 mass ratio. At the bottom, green bars correspond to orthorhombic AgNO3 (ICDD 74-4790) and black to cubic Ag (ICDD 65-2871).
Reference
- Baláž, M.; Bedlovičová, Z.; Daneu, N.; Siksa, P.; Sokoli, L.; Tkáčiková, Ľ.; Salayová, A.; Džunda, R.; Kováčová, M.; Bureš, R.; et al. Mechanochemistry as an Alternative Method of Green Synthesis of Silver Nanoparticles with Antibacterial Activity: A Comparative Study. Nanomaterials 2021, 11, 1139. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).