Correction: Mouza, A.A. et al. A Simplified Model for Predicting Friction Factors of Laminar Blood Flow in Small-Caliber Vessels. Fluids, 2018, 3, 75

Aikaterini A. Mouza; Olga D. Skordia; Ioannis D. Tzouganatos; Spiros V. Paras

doi:10.3390/fluids4010041

,

and

¹

Department of Chemical Engineering, Aristotle University of Thessaloniki, 541 24 Thessaloniki, Greece

²

Department of Chemical Engineering, Imperial College, London SW7 2AZ, UK

^*

Author to whom correspondence should be addressed.

Fluids2019, 4(1), 41;https://doi.org/10.3390/fluids4010041

This article belongs to the Special Issue Experimental and Numerical Studies in Biomedical Engineering

Version Notes

Order Reprints

In the published paper [1], there is a typographical error in Equation (10). The minus sign (−) is missing from the exponent of Re*. Equation (10) must be written as f = 5.974 Bm^−0.266Re*^−1.064.

The changes do not affect the scientific results. We apologize for any inconvenience caused to the readers by this error. The manuscript will be updated and the original will remain online on the webpage for the article, including a reference to this correction.

References

Mouza, A.A.; Skordia, O.D.; Tzouganatos, I.D.; Paras, S.V. A Simplified model for predicting friction factors of laminar blood flow in small-caliber vessels. Fluids 2018, 3, 75. [Google Scholar] [CrossRef]

© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Correction: Mouza, A.A. et al. A Simplified Model for Predicting Friction Factors of Laminar Blood Flow in Small-Caliber Vessels. Fluids, 2018, 3, 75

References

Article Metrics

Citations

Article Access Statistics