The ability to control and understand the temperature at the nanoscale is fundamental for manipulating physical, chemical, and biological processes.
Nanothermometry is a crucial aspect of scientific and technological applications ranging from electronics to biological systems. The development of well-defined protocols for precise temperature determination is essential for advancing research and applications in nanotechnology. Accurate nanoscale temperature measurements involve the integration of various strategies, including the design and fabrication of new materials, the implementation of detection techniques, and the testing of prototypes for real-world applications.
The utilization of optical techniques, such as fluorescence and Raman spectroscopy, enables the efficient characterization of different materials. The ability to synthesize and test materials using these techniques allows researchers to identify the most suitable and sensitive nanothermometry materials. This is particularly important when prototype devices are developed for biomedical applications, where biocompatibility and non-invasiveness are essential.
This presentation will focus on Raman and luminescent nanostructures. The Raman active material is TiO2, anatase, while lanthanides, such as Yb3+ and Er3+, are used as luminescent materials; they are both characterized by a signal strongly dependent on the local temperature.
Anatase nanoparticles are synthetized by MW-assisted (MW) and solvothermal procedures, while core@shell nanoparticles are realized by MW-assisted co-precipitation of CaCl3, YbCl3, and ErCl3 and sol–gel methods. Fluorescence and Raman measurements were conducted on sample powders in the visible and n-IR ranges. The sample, maintained at a defined temperature via a temperature controller, underwent laser beam focalization through a microscope. The signals were then collected through a triple monochromator and a liquid nitrogen-cooled CCD camera. Preliminary findings indicate the feasibility of obtaining reliable temperatures for characterizing the local temperature using fluorescence and Raman techniques.
The preliminary results indicate a reliable and accurate temperature characterization, paving the way for further advances in nanothermometry and its applications in diverse fields, including biomedicine.
Author Contributions
Conceptualization, R.S., S.G. and A.S.; methodology, R.S., S.G., R.P. and A.S.; software, T.P., M.F., V.Z., E.M. and E.R.; validation, T.P., M.F., V.Z., E.M., S.G., R.P., A.S. and R.S.; formal analysis, T.P., M.F., V.Z., E.M. and E.R.; investigation, T.P., M.F., V.Z., E.M., S.G., R.P., A.S. and R.S.; resources, R.S., S.G. and A.S.; data curation, T.P., M.F., V.Z., E.M. and E.R.; writing—original draft preparation, R.S. and R.P.; writing—review and editing, T.P., M.F., V.Z., E.M., S.G., R.P., A.S. and R.S.; visualization, T.P., M.F., V.Z., E.M. and E.R.; supervision, R.S., R.P., S.G. and A.S.; project administration, R.S., R.P., S.G. and A.S.; funding acquisition, R.S., S.G. and A.S. All authors have read and agreed to the published version of the manuscript.
Funding
This research was funded by the MUR 2022 PNRR—DD 1409 del 14/09/2022—CUP “C53D23007890001”, MUR Project P2022XMF43—“Optical NanoThermometry using Luminescence and Raman Spectroscopies—OPTIMISE”.
Institutional Review Board Statement
Not applicable.
Informed Consent Statement
Not applicable.
Data Availability Statement
Data are contained in the presentation.
Conflicts of Interest
The authors declare no conflicts of interest.
| Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
, 
