Orthoses are medical devices applied externally to improve performance in patients with difficulties and/or disabilities, designed to provide support, stabilization, and immobilization [1,2]. Specifically, customized orthoses are the most appropriate treatment for pathologies in the upper or lower limbs, offering the benefit of individualized treatment [3].
When designing customized orthoses, the choice of material to be used is relevant. Important features such as strength, stiffness, durability, density, and resistance to corrosion must be considered. Most recently, the use of Additive Manufacturing appeared as a solution to build custom orthotics in an easier and faster way. For this, we evaluated the use of Fused Deposition Modelling to produce custom orthotics. Several materials commonly used in FDM were assessed, such as: acrylonitrile styrene acrylate (ASA), Nylon 12, polycarbonate (PC), polycarbonate/acrylonitrile butadiene styrene (PC-ABS), polyethylene terephthalate glycol (PETG), polylactic acid (PLA), thermoplastic polyurethane (TPU), ULTEM 1010™, and ULTEM 9085™. Different parameters (yield stress, Young’s modulus, and elongation at break) were assessed upon compression, flexion, and tensile mechanical testing according to ASTM D–695, ISO 178, and ASTM D638-14, respectively. Overall, the results show that PLA, PETG, ULTEM 1010, and ULTEM 9085 are the most suitable materials with the best properties for the production of the proposed orthoses, ensuring their stability and performance.
Author Contributions
Conceptualization, C.F., D.T., R.S., C.M., P.M., A.V. and N.A.; methodology, C.F., D.T. and R.S.; validation, R.S., C.M., A.V., P.M. and N.A.; writing—original draft preparation, C.F., D.T. and R.S.; writing—review and editing, R.S., C.M., A.V., P.M. and N.A.; supervision, R.S., C.M., A.V., P.M. and N.A.; project administration, A.V. and R.S. All authors have read and agreed to the published version of the manuscript.
Funding
This work was financially supported by the Fundação para a Ciência e a Tecnologia FCT/MCTES (PIDDAC) and Centro2020 through the following Projects: UIDB/04044/2020; UIDP/04044/2020; SFRH/BD/145292/2019; Associate Laboratory ARISE LA/P/0112/2020; PAMI—ROTEIRO/0328/2013 (Nº 022158) and ReinventO (POCI-01-0247-FEDER-040021).
Institutional Review Board Statement
Not applicable.
Informed Consent Statement
Not applicable.
Data Availability Statement
Not applicable.
Conflicts of Interest
The authors declare no conflict of interest.
References
- Alqahtani, M.S.; Al-Tamimi, A.; Almeida, H.; Cooper, G.; Bartolo, P. A Review on the Use of Additive Manufacturing to Produce Lower Limb Orthoses. Prog. Addit. Manuf. 2020, 5, 85–94. [Google Scholar] [CrossRef] [Green Version]
- Barrios-Muriel, J.; Romero-Sánchez, F.; Alonso-Sánchez, F.J.; Rodríguez Salgado, D. Advances in Orthotic and Prosthetic Manufacturing: A Technology Review. Materials 2020, 13, 295. [Google Scholar] [CrossRef] [PubMed] [Green Version]
- Dombroski, C.E.; Balsdon, M.E.R.; Froats, A. The Use of a Low Cost 3D Scanning and Printing Tool in the Manufacture of Custom-Made Foot Orthoses: A Preliminary Study. BMC Res. Notes 2014, 7, 443. [Google Scholar] [CrossRef] [PubMed] [Green Version]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).