Editor’s Choice Articles

Editor’s Choice articles are based on recommendations by the scientific editors of MDPI journals from around the world. Editors select a small number of articles recently published in the journal that they believe will be particularly interesting to readers, or important in the respective research area. The aim is to provide a snapshot of some of the most exciting work published in the various research areas of the journal.

Order results
Result details
Results per page
Select all
Export citation of selected articles as:
18 pages, 16795 KiB  
Article
Optimizing Smoke and Plume Rise Modeling Approaches at Local Scales
by Derek V. Mallia, Adam K. Kochanski, Shawn P. Urbanski and John C. Lin
Atmosphere 2018, 9(5), 166; https://doi.org/10.3390/atmos9050166 - 1 May 2018
Cited by 29 | Viewed by 5646
Abstract
Heating from wildfires adds buoyancy to the overlying air, often producing plumes that vertically distribute fire emissions throughout the atmospheric column over the fire. The height of the rising wildfire plume is a complex function of the size of the wildfire, fire heat [...] Read more.
Heating from wildfires adds buoyancy to the overlying air, often producing plumes that vertically distribute fire emissions throughout the atmospheric column over the fire. The height of the rising wildfire plume is a complex function of the size of the wildfire, fire heat flux, plume geometry, and atmospheric conditions, which can make simulating plume rises difficult with coarser-scale atmospheric models. To determine the altitude of fire emission injection, several plume rise parameterizations have been developed in an effort estimate the height of the wildfire plume rise. Previous work has indicated the performance of these plume rise parameterizations has generally been mixed when validated against satellite observations. However, it is often difficult to evaluate the performance of plume rise parameterizations due to the significant uncertainties associated with fire input parameters such as fire heat fluxes and area. In order to reduce the uncertainties of fire input parameters, we applied an atmospheric modeling framework with different plume rise parameterizations to a well constrained prescribed burn, as part of the RxCADRE field experiment. Initial results found that the model was unable to reasonably replicate downwind smoke for cases when fire emissions were emitted at the surface and released at the top of the plume. However, when fire emissions were distributed below the plume top following a Gaussian distribution, model results were significantly improved. Full article
(This article belongs to the Special Issue Fire and the Atmosphere)
Show Figures

Figure 1

17 pages, 17495 KiB  
Article
Refinement of Modeled Aqueous-Phase Sulfate Production via the Fe- and Mn-Catalyzed Oxidation Pathway
by Syuichi Itahashi, Kazuyo Yamaji, Satoru Chatani and Hiroshi Hayami
Atmosphere 2018, 9(4), 132; https://doi.org/10.3390/atmos9040132 - 1 Apr 2018
Cited by 23 | Viewed by 5649
Abstract
We refined the aqueous-phase sulfate (SO42−) production in the state-of-the-art Community Multiscale Air Quality (CMAQ) model during the Japanese model inter-comparison project, known as Japan’s Study for Reference Air Quality Modeling (J-STREAM). In Japan, SO42− is the major [...] Read more.
We refined the aqueous-phase sulfate (SO42−) production in the state-of-the-art Community Multiscale Air Quality (CMAQ) model during the Japanese model inter-comparison project, known as Japan’s Study for Reference Air Quality Modeling (J-STREAM). In Japan, SO42− is the major component of PM2.5, and CMAQ reproduces the observed seasonal variation of SO42− with the summer maxima and winter minima. However, CMAQ underestimates the concentration during winter over Japan. Based on a review of the current modeling system, we identified a possible reason as being the inadequate aqueous-phase SO42− production by Fe- and Mn-catalyzed O2 oxidation. This is because these trace metals are not properly included in the Asian emission inventories. Fe and Mn observations over Japan showed that the model concentrations based on the latest Japanese emission inventory were substantially underestimated. Thus, we conducted sensitivity simulations where the modeled Fe and Mn concentrations were adjusted to the observed levels, the Fe and Mn solubilities were increased, and the oxidation rate constant was revised. Adjusting the concentration increased the SO42− concentration during winter, as did increasing the solubilities and revising the rate constant to consider pH dependencies. Statistical analysis showed that these sensitivity simulations improved model performance. The approach adopted in this study can partly improve model performance in terms of the underestimation of SO42− concentration during winter. From our findings, we demonstrated the importance of developing and evaluating trace metal emission inventories in Asia. Full article
(This article belongs to the Special Issue Regional Scale Air Quality Modelling)
Show Figures

Figure 1

16 pages, 1492 KiB  
Article
Returning Tea Pruning Residue and Its Biochar Had a Contrasting Effect on Soil N2O and CO2 Emissions from Tea Plantation Soil
by Aung Zaw Oo, Shigeto Sudo, Khin Thuzar Win, Akira Shibata, Tomohito Sano and Yuhei Hirono
Atmosphere 2018, 9(3), 109; https://doi.org/10.3390/atmos9030109 - 15 Mar 2018
Cited by 13 | Viewed by 5731
Abstract
A laboratory incubation experiment is conducted for 90 days under controlled conditions where either pruning residue or its biochar is applied to determine which application generates the lowest amount of greenhouse gas from tea plantation soil. To study the effect of incorporation depth [...] Read more.
A laboratory incubation experiment is conducted for 90 days under controlled conditions where either pruning residue or its biochar is applied to determine which application generates the lowest amount of greenhouse gas from tea plantation soil. To study the effect of incorporation depth on soil N2O and CO2 emissions, experiment 1 is performed with three treatments: (1) control; (2) tea pruning residue; and (3) residue biochar mixed with soil from two different depths (0–5 cm and 0–10 cm layers). In experiment 2, only the 0–10 cm soil layer is used to study the effect of surface application of tea pruning residue or its biochar on soil N2O and CO2 emissions compared with the control. The results show that biochar significantly increases soil pH, total C and C/N ratio in both experiments. The addition of pruning residue significantly increases soil total C content, cumulative N2O and CO2 emissions after 90 days of incubation. Converting pruning residue to biochar and its application significantly decreases cumulative N2O emission by 17.7% and 74.2% from the 0–5 cm and 0–10 cm soil layers, respectively, compared to their respective controls. However, biochar addition increases soil CO2 emissions for both the soil layers in experiment 1. Surface application of biochar to soil significantly reduces both N2O and CO2 emissions compared to residue treatment and the control in experiment 2. Our results suggest that converting pruning residue to biochar and its addition to soil has the potential to mitigate soil N2O emissions from tea plantation. Full article
(This article belongs to the Special Issue C and N Cycling and Greenhouse Gases Emission in Agroecosystem)
Show Figures

Figure 1

32 pages, 1081 KiB  
Review
Exchange Processes in the Atmospheric Boundary Layer Over Mountainous Terrain
by Stefano Serafin, Bianca Adler, Joan Cuxart, Stephan F. J. De Wekker, Alexander Gohm, Branko Grisogono, Norbert Kalthoff, Daniel J. Kirshbaum, Mathias W. Rotach, Jürg Schmidli, Ivana Stiperski, Željko Večenaj and Dino Zardi
Atmosphere 2018, 9(3), 102; https://doi.org/10.3390/atmos9030102 - 12 Mar 2018
Cited by 140 | Viewed by 16352
Abstract
The exchange of heat, momentum, and mass in the atmosphere over mountainous terrain is controlled by synoptic-scale dynamics, thermally driven mesoscale circulations, and turbulence. This article reviews the key challenges relevant to the understanding of exchange processes in the mountain boundary layer and [...] Read more.
The exchange of heat, momentum, and mass in the atmosphere over mountainous terrain is controlled by synoptic-scale dynamics, thermally driven mesoscale circulations, and turbulence. This article reviews the key challenges relevant to the understanding of exchange processes in the mountain boundary layer and outlines possible research priorities for the future. The review describes the limitations of the experimental study of turbulent exchange over complex terrain, the impact of slope and valley breezes on the structure of the convective boundary layer, and the role of intermittent mixing and wave–turbulence interaction in the stable boundary layer. The interplay between exchange processes at different spatial scales is discussed in depth, emphasizing the role of elevated and ground-based stable layers in controlling multi-scale interactions in the atmosphere over and near mountains. Implications of the current understanding of exchange processes over mountains towards the improvement of numerical weather prediction and climate models are discussed, considering in particular the representation of surface boundary conditions, the parameterization of sub-grid-scale exchange, and the development of stochastic perturbation schemes. Full article
(This article belongs to the Special Issue Atmospheric Processes over Complex Terrain)
Show Figures

Figure 1

18 pages, 4898 KiB  
Article
Analysis and Comparison of Shading Strategies to Increase Human Thermal Comfort in Urban Areas
by Ivan Lee, James A. Voogt and Terry J. Gillespie
Atmosphere 2018, 9(3), 91; https://doi.org/10.3390/atmos9030091 - 1 Mar 2018
Cited by 54 | Viewed by 7429
Abstract
With the expected increase in warmer conditions caused by climate change, heat-related illnesses are becoming a more pressing issue. One way that humans can protect themselves from this is to seek shade. The design of urban spaces can provide individuals with a variety [...] Read more.
With the expected increase in warmer conditions caused by climate change, heat-related illnesses are becoming a more pressing issue. One way that humans can protect themselves from this is to seek shade. The design of urban spaces can provide individuals with a variety of ways to obtain this shade. The objective of this study was to perform a detailed evaluation and comparison of three shading strategies that could be used in an urban environment: shade from a building, from a tree, and from an umbrella. This was done through using field measurements to calculate the impact of each strategy on a thermal comfort index (Comfort Formula (COMFA)) in two urban settings during sunny days of the summer of 2013 and 2014 in London, Canada. Building shade was found to be the most effective cooling strategy, followed by the tree strategy and the umbrella strategy. As expected, the main determinant of this ranking was a strategy’s ability to block incoming shortwave radiation. Further analysis indicated that changes in the convective loss of energy and in longwave radiation absorption had a smaller impact that caused variations in the strategy effectiveness between settings. This suggests that under non-sunny days, these rankings could change. Full article
(This article belongs to the Special Issue Urban Design and City Microclimates)
Show Figures

Graphical abstract

14 pages, 1765 KiB  
Technical Note
Overview of Model Inter-Comparison in Japan’s Study for Reference Air Quality Modeling (J-STREAM)
by Satoru Chatani, Kazuyo Yamaji, Tatsuya Sakurai, Syuichi Itahashi, Hikari Shimadera, Kyo Kitayama and Hiroshi Hayami
Atmosphere 2018, 9(1), 19; https://doi.org/10.3390/atmos9010019 - 11 Jan 2018
Cited by 32 | Viewed by 8408
Abstract
The inter-comparison of regional air quality models is an effective way to understand uncertainty in ambient pollutant concentrations simulated using various model configurations, as well as to find ways to improve model performance. Based on the outcomes and experiences of Japanese projects thus [...] Read more.
The inter-comparison of regional air quality models is an effective way to understand uncertainty in ambient pollutant concentrations simulated using various model configurations, as well as to find ways to improve model performance. Based on the outcomes and experiences of Japanese projects thus far, a new model inter-comparison project called Japan’s study for reference air quality modeling (J-STREAM) has begun. The objective of J-STREAM is to establish reference air quality modeling for source apportionment and effective strategy making to suppress secondary air pollutants including PM2.5 and photochemical ozone in Japan through model inter-comparison. The first phase focuses on understanding the ranges and limitations in ambient PM2.5 and ozone concentrations simulated by participants using common input datasets. The second phase focuses on issues revealed in previous studies in simulating secondary inorganic aerosols, as well as on the three-dimensional characteristics of photochemical ozone as a new target. The third phase focuses on comparing source apportionments and sensitivities under heavy air pollution episodes simulated by participating models. Detailed understanding of model performance, uncertainty, and possible improvements to urban-scale air pollution involving secondary pollutants, as well as detailed sector-wise source apportionments over megacities in Japan are expected. Full article
(This article belongs to the Special Issue Regional Scale Air Quality Modelling)
Show Figures

Figure 1

1964 KiB  
Article
An Effective Surrogate Tracer Technique for S. aureus Bioaerosols in a Mechanically Ventilated Hospital Room Replica Using Dilute Aqueous Lithium Chloride
by Marco-Felipe King, Miller Alonso Camargo-Valero, Adriana Matamoros-Veloza, P. Andrew Sleigh and Catherine J. Noakes
Atmosphere 2017, 8(12), 238; https://doi.org/10.3390/atmos8120238 - 1 Dec 2017
Cited by 5 | Viewed by 4596
Abstract
Finding a non-pathogenic surrogate aerosol that represents the deposition of typical bioaerosols in healthcare settings is beneficial from the perspective of hospital facility testing, general infection control and outbreak analysis. This study considers aerosolization of dilute aqueous lithium chloride (LiCl) and sodium chloride [...] Read more.
Finding a non-pathogenic surrogate aerosol that represents the deposition of typical bioaerosols in healthcare settings is beneficial from the perspective of hospital facility testing, general infection control and outbreak analysis. This study considers aerosolization of dilute aqueous lithium chloride (LiCl) and sodium chloride (NaCl) solutions as surrogate tracers capable of representing Staphylococcus aureus bioaerosol deposition on surfaces in mechanically ventilated rooms. Tests were conducted in a biological test chamber set up as a replica hospital single patient room. Petri dishes on surfaces were used to collect the Li, Na and S. aureus aerosols separately after release. Biological samples were analyzed using cultivation techniques on solid media, and flame atomic absorption spectroscopy was used to measure Li and Na atom concentrations. Spatial deposition distribution of Li tracer correlated well with S. aureus aerosols (96% of pairs within a 95% confidence interval). In the patient hospital room replica, results show that the most contaminated areas were on surfaces 2 m away from the source. This indicates that the room’s airflow patterns play a significant role in bioaerosol transport. NaCl proved not to be sensitive to spatial deposition patterns. LiCl as a surrogate tracer for bioaerosol deposition was most reliable as it was robust to outliers, sensitive to spatial heterogeneity and found to require less replicates than the S. aureus counterpart to be in good spatial agreement with biological results. Full article
(This article belongs to the Special Issue Indoor Air Pollution)
Show Figures

Figure 1

2438 KiB  
Perspective
Unmanned Aerial Systems for Monitoring Trace Tropospheric Gases
by Travis J. Schuyler and Marcelo I. Guzman
Atmosphere 2017, 8(10), 206; https://doi.org/10.3390/atmos8100206 - 23 Oct 2017
Cited by 54 | Viewed by 16116
Abstract
The emission of greenhouse gases (GHGs) has changed the composition of the atmosphere during the Anthropocene. Accurately documenting the sources and magnitude of GHGs emission is an important undertaking for discriminating the contributions of different processes to radiative forcing. Currently there is no [...] Read more.
The emission of greenhouse gases (GHGs) has changed the composition of the atmosphere during the Anthropocene. Accurately documenting the sources and magnitude of GHGs emission is an important undertaking for discriminating the contributions of different processes to radiative forcing. Currently there is no mobile platform that is able to quantify trace gases at altitudes <100 m above ground level that can achieve spatiotemporal resolution on the order of meters and seconds. Unmanned aerial systems (UASs) can be deployed on-site in minutes and can support the payloads necessary to quantify trace gases. Therefore, current efforts combine the use of UASs available on the civilian market with inexpensively designed analytical systems for monitoring atmospheric trace gases. In this context, this perspective introduces the most relevant classes of UASs available and evaluates their suitability to operate three kinds of detectors for atmospheric trace gases. The three subsets of UASs discussed are: (1) micro aerial vehicles (MAVs); (2) vertical take-off and landing (VTOL); and, (3) low-altitude short endurance (LASE) systems. The trace gas detectors evaluated are first the vertical cavity surface emitting laser (VCSEL), which is an infrared laser-absorption technique; second two types of metal-oxide semiconductor sensors; and, third a modified catalytic type sensor. UASs with wingspans under 3 m that can carry up to 5 kg a few hundred meters high for at least 30 min provide the best cost and convenience compromise for sensors deployment. Future efforts should be focused on the calibration and validation of lightweight analytical systems mounted on UASs for quantifying trace atmospheric gases. In conclusion, UASs offer new and exciting opportunities to study atmospheric composition and its effect on weather patterns and climate change. Full article
(This article belongs to the Special Issue Atmospheric Measurements with Unmanned Aerial Systems (UAS))
Show Figures

Figure 1

10426 KiB  
Article
Development of an Unmanned Aerial Vehicle for the Measurement of Turbulence in the Atmospheric Boundary Layer
by Brandon M. Witte, Robert F. Singler and Sean C. C. Bailey
Atmosphere 2017, 8(10), 195; https://doi.org/10.3390/atmos8100195 - 4 Oct 2017
Cited by 60 | Viewed by 8723
Abstract
This paper describes the components and usage of an unmanned aerial vehicle developed for measuring turbulence in the atmospheric boundary layer. A method of computing the time-dependent wind speed from a moving velocity sensor data is provided. The physical system built to implement [...] Read more.
This paper describes the components and usage of an unmanned aerial vehicle developed for measuring turbulence in the atmospheric boundary layer. A method of computing the time-dependent wind speed from a moving velocity sensor data is provided. The physical system built to implement this method using a five-hole probe velocity sensor is described along with the approach used to combine data from the different on-board sensors to allow for extraction of the wind speed as a function of time and position. The approach is demonstrated using data from three flights of two unmanned aerial vehicles (UAVs) measuring the lower atmospheric boundary layer during transition from a stable to convective state. Several quantities are presented and show the potential for extracting a range of atmospheric boundary layer statistics. Full article
(This article belongs to the Special Issue Atmospheric Measurements with Unmanned Aerial Systems (UAS))
Show Figures

Graphical abstract

228 KiB  
Article
The Impact of Residential Combustion Emissions on Health Expenditures: Empirical Evidence from Sub-Saharan Africa
by Aboubacar Badamassi, Deyi Xu and Boubacar Hamidou Leyla
Atmosphere 2017, 8(9), 157; https://doi.org/10.3390/atmos8090157 - 25 Aug 2017
Cited by 11 | Viewed by 4232
Abstract
Residential combustion of fuels, especially solid, for cooking, heating and other activities generates high level emissions that considerably contribute to indoor and outdoor air pollutants concentrations, which adversely affect human health and are likely to influence heath expenditures. We used the system General [...] Read more.
Residential combustion of fuels, especially solid, for cooking, heating and other activities generates high level emissions that considerably contribute to indoor and outdoor air pollutants concentrations, which adversely affect human health and are likely to influence heath expenditures. We used the system General Method of Moments (GMM) technique to examine the role of residential combustion (proxied by: particulate matter (PM2.5), carbon monoxide (CO), nitrogen oxide (NOx) and sulphur dioxide (SO2) emissions) in determining health expenditures while controlling for ambient air pollutants emissions from the other categories such as transportation, manufacturing industries and construction, and others. We employed data covering the period 1995–2010 in 44 countries of Sub-Saharan Africa (SSA). Health expenditures are categorized into per capita, public and private out-of-pocket; and we run three separate regressions according to the categories. The findings indicate that residential sector combustion was significantly associated with higher health expenditures, especially the out-of-pocket compared with other categories. Moreover, PM2.5 is found to have the highest impact on health expenditures. The implementation of effective public health and environmental health policies that encourage the access and use of cleaner fuels or improved cook stoves in SSA would be associated with not only a reduction in healthcare expenditures but also with other health and socio-economic benefits. Full article
(This article belongs to the Special Issue Indoor Air Pollution)
Back to TopTop