Construction Management, and Computers & Digitization
A section of Buildings (ISSN 2075-5309).
Section Information
The objective of the Section “Construction Management, and Computers and Digitization” is to stimulate the discussion needed to advance the construction industry. We are currently living in the middle of an inflection point where computers and artificial intelligence are starting to replace what is known as knowledge economy jobs. This new reality will have a huge impact on our jobs and on how we manage the design, construction, and operations of our buildings and infrastructure systems. This Section welcomes papers that enable the transformation of the construction industry focusing on the development and validation of novel management tools and processes, innovative materials, equipment and robotics, and advanced computing hardware and software in support of the whole lifecycle of sustainable buildings and infrastructure systems from its design to construction and operations.
Keywords
- Facilities management
- Design management
- Construction/project management
- Conflict/risk management
- Cost/quality control
- Leadership and teamwork in construction
- Sensors, smart structures, and intelligent control
- Machine learning and deep learning
- Artificial intelligence
- Neural networks
- Information systems
- Automated technologies
- Virtual reality and visualization technologies
- Mathematical modeling
- Database management
- Software engineering
- Robotics in construction
- Digital towns and smart cities
- BIM
- Digital twins
- Computer graphics, imaging, and vision
- Advanced buildings and infrastructure systems
- Sustainable construction
Editorial Board
Topical Advisory Panel
Special Issues
Following special issues within this section are currently open for submissions:
- Construction Scheduling, Quality and Risk Management (Deadline: 30 June 2024)
- Advances in Building Asset Management Systems and Technologies (Deadline: 30 June 2024)
- Research on Construction Innovation and Digitization (Deadline: 30 June 2024)
- Intelligence and Automation in Construction Industry (Deadline: 30 June 2024)
- Research on BIM—Integrated Construction Operation Simulation (Deadline: 30 June 2024)
- Advances in Life Cycle Management of Civil Engineering (Deadline: 30 June 2024)
- Advances in Optimization and Machine Learning in Indoor Environmental Quality and Energy in Buildings (Deadline: 30 June 2024)
- The Integration of Building Information Modeling (BIM) Technology and Artificial Intelligence (AI) in Smart Buildings (Deadline: 30 June 2024)
- Application of Innovative Technologies in Construction Project Management (Deadline: 30 June 2024)
- Emerging Technologies and Workflows for BIM and Digital Construction (Deadline: 30 June 2024)
- BIM-Based Construction Management: Trends and Prospects (Deadline: 30 June 2024)
- Best Practices of Resilient Buildings (and Districts) and Post-disaster Reconstruction (Deadline: 10 July 2024)
- Workforce Development and Education in the Construction Industry: Challenges and Strategies (Deadline: 20 July 2024)
- Building Information Modeling (BIM): Recent Application and Future Perspective (Deadline: 20 July 2024)
- Reconstruction of 3D Buildings Models and 3D Buildings Extraction from High-Resolution Geospatial Data (Deadline: 20 July 2024)
- Intelligence Techniques Applied in Infrastructure, Engineering and Construction (Deadline: 30 July 2024)
- Applications of Artificial Intelligence in Building Development (Deadline: 30 July 2024)
- Digital Transformation in the Construction Industry: Latest Advances and Prospects (Deadline: 31 July 2024)
- Artificial Intelligence and Buildings: Design, Analysis, and Construction (Deadline: 31 July 2024)
- Inclusion, Safety, and Resilience in the Construction Industry (Deadline: 31 July 2024)
- Emerging Technologies, Tools, and Methods for Enabling Safer, Healthier, and More Productive Work Settings in Construction Project Management (Deadline: 31 July 2024)
- The Impact of Construction Projects and Project Management on Society (Deadline: 10 August 2024)
- Digital Technologies Transforming Construction Design (Deadline: 10 August 2024)
- Advancing Occupational Health and Safety in Construction: Innovations, Education, and Training for a Safer Future (Deadline: 20 August 2024)
- Advances in Project Development and Construction Management (Deadline: 20 August 2024)
- Integrated Project Delivery in Construction Industry (Deadline: 20 August 2024)
- Robotics, Automation and Digitization in Construction (Deadline: 20 August 2024)
- Modular and Offsite Construction: Evidence-Based Benefits and Innovations (Deadline: 20 August 2024)
- Digital Technologies in Architecture, Engineering and Construction (AEC) (Deadline: 30 August 2024)
- Big Data Technologies in Construction Management (Deadline: 31 August 2024)
- A Sustainable and Healthy Work Environment in Construction Industry 4.0 (Deadline: 31 August 2024)
- Advancing Construction Material Performance: Integrating Machine Learning Innovations (Deadline: 10 September 2024)
- Sustainability in the Construction Industry (Deadline: 15 September 2024)
- Emerging Technologies and Equipment in Civil Engineering (Building, Bridge, and Tunnel Engineering) (Deadline: 20 September 2024)
- Intelligent Risk Identification and Management in Urban Built Environment (Deadline: 28 September 2024)
- Smart and Proactive Construction Safety Combined with AI, IoT, and Big Data (Deadline: 30 September 2024)
- Safety and Health in the Building Lifecycle (Deadline: 30 September 2024)
- BIM Application in Construction Management (Deadline: 15 October 2024)
- Study of Building Detection, Assessment, and Management: Based on Computer and Information Technologies (Deadline: 20 October 2024)
- Urban Infrastructure Construction and Management (Deadline: 20 October 2024)
- Information and Communication Technology (ICT) and Optimization for Construction Project Management (Deadline: 30 October 2024)
- Research on Safety Control and Risk Management in Construction Engineering: Progress, Challenges and Strategies (Deadline: 31 October 2024)
- Solid Waste Management in the Construction Sector (Deadline: 31 October 2024)
- Construction in Urban Underground Space (Deadline: 31 October 2024)
- Public–Private Partnerships (PPPs) for Construction Project Deliveries (Deadline: 31 October 2024)
- Statistical Approaches in Construction Management: Innovations and Applications (Deadline: 20 November 2024)
- Advances in Digital Construction Management (Deadline: 20 November 2024)
- Application of Digital Technology in the Preservation and Restoration of Historic Buildings (Deadline: 29 November 2024)
- Smart and Sustainable Infrastructure: Theory and Practice (Deadline: 29 November 2024)
- Recent Advances in Intelligent Infrastructure and Construction Engineering (Deadline: 30 November 2024)
- Towards More Practical BIM/GIS Integration (Deadline: 30 November 2024)
- Big Data and Machine/Deep Learning in Construction (Deadline: 30 November 2024)
- Construction Workplace Trends and Work Health and Safety (Deadline: 30 November 2024)
- The Power of Knowledge in Enhancing Construction Project Delivery (Deadline: 30 November 2024)
- BIM Uptake and Adoption: New Perspectives (Deadline: 1 December 2024)
- Life Cycle Management of Building and Infrastructure Projects (Deadline: 20 December 2024)
- Strategic Planning and Control in Complex Project Management (Deadline: 30 December 2024)
- Sustainable Rural Development: Advances on Rural Digitization and Smart Village Construction (Deadline: 31 December 2024)
- Green Building Project Management (Deadline: 31 December 2024)
- Advance in BIM-Based Technologies for Sustainable Building Performance Predictions (Deadline: 31 December 2024)
- Application of Building Information Modelling in Construction Management (Deadline: 31 December 2024)
- Deep Learning Models in Buildings (Deadline: 31 December 2024)
- Innovations in Urban Sensing and Intelligent Infrastructure Management (Deadline: 10 January 2025)
- Advances in Automation and Intelligence in Construction (Deadline: 10 January 2025)
- Human Sensing and Artificial Intelligence in Buildings (Deadline: 10 January 2025)
- Digital Technology-Empowered Innovation and Application for Building Engineering Education (Deadline: 20 January 2025)
- Advanced Technologies for Successful and Sustainable Construction and Maintenance Projects—2nd Edition (Deadline: 30 January 2025)
- Towards Industrial 5.0 in the Construction Industry: Techniques, Requirements, Energy, Maintenance Engineering, Challenges and Opportunities (Deadline: 31 January 2025)
- BIM-Based Construction Management (Deadline: 31 January 2025)
- Advances in AI, Digitization, Robotics, IoT, BIM, and Spatial Modeling in Building Sciences (Deadline: 31 January 2025)
- Selected Papers from the 2nd International Conference on Construction Engineering and Management (ICCEM 2024) (Deadline: 31 March 2025)
- Challenges in Implementing Emerging Technologies in the Building Construction Industry (Deadline: 15 April 2025)
- The Evolution of Construction Dispute Resolution (Deadline: 10 June 2025)
- Advanced Experimental and Numerical Studies on Ancient Stone Masonry Constructions (Deadline: 20 June 2025)
- Advanced Research on Intelligent Building Construction and Management (Deadline: 30 June 2025)
- Sustainable Construction Management and Engineering: Residential Construction with Focus on Life Cycle of Buildings and Costs (Deadline: 8 July 2025)
Topical Collections
Following topical collections within this section are currently open for submissions: