Electrical Machines and Drives
A section of Machines (ISSN 2075-1702).
Section Information
Electric Machines and Drives is a traditional area of research, but it is in continuous evolution. The development of new designs of different machine typologies, the design of new drive topologies, new control strategies, novel condition monitoring and fault diagnosis techniques, as well as the application of recent signal processing, artificial intelligence (AI), pattern recognition or machine learning tools for diverse purposes within the electrical machine and drives area, are evidence of the dynamism of the area. This section invites paper submissions on the emerging research and technologies related to electrical machines and drives (design, control, materials, optimization and diagnosis).
Topics of interest include, but are not limited to, the following:
- New electrical machine and drive designs;
- Use of new materials in electrical machines and drives;
- Novel electrical machine control strategies;
- Enhanced optimization methods for electrical machines and drives;
- New condition monitoring and fault diagnosis methods;
- Modern applications of advanced signal processing tools;
- Recent application of AI methods to electrical machines and drives;
- Electrical machines and drives and machine learning;
- New pattern recognition methods applied to electrical machines and drives.
Editorial Board
Topical Advisory Panel
Special Issues
Following special issues within this section are currently open for submissions:
- Model Predictive Control and Fault Diagnosis for Multiphase Electric Drives (Deadline: 30 September 2024)
- Dual Winding Motors and Drives (Deadline: 30 September 2024)
- Additive Manufacturing of Electrical Machines (Deadline: 31 October 2024)
- Advancements in Condition Monitoring of Electric Motors: Integrating Digital Twins, AI, and IoT for Enhanced Operational Efficiency, Fault Diagnosis, and Cybersecurity (Deadline: 31 October 2024)
- Design and Control of Electrical Machines II (Deadline: 31 October 2024)
- New Advances in Design, Optimization, and Control of Electric Machines for Electric Power Systems and Microgrids (Deadline: 31 October 2024)
- Robust Control of Permanent Magnet Synchronous Motors (PMSM) and Induction Motors (IM) (Deadline: 31 October 2024)
- Applications of AI and Digital Twinning in Electric Machines (Deadline: 15 November 2024)
- Electrical Machines in Electric Vehicles (Deadline: 30 November 2024)
- New Trends of Permanent Magnet Machines (Deadline: 30 November 2024)
- 10th Anniversary of Machines—Feature Papers in Electrical Machines and Drives (Deadline: 31 December 2024)
- Integration and Implementation of AI in the Control and Monitoring of Electrical Machines, High Power Converters, and Energy Storage Systems (Deadline: 31 December 2024)
- Data-Driven Control of Permanent Magnet Synchronous Motor (PMSM) Drives (Deadline: 31 December 2024)
- Advancements in Control and Diagnostics for Electric Motor Drive Systems (Deadline: 31 December 2024)
- Advanced Control Strategies for Magnet-Free Synchronous Motors (Deadline: 31 December 2024)
- Recent Progress in Electrical Machines and Motor Drives (Deadline: 31 December 2024)
- Advances in Bearing Modeling, Fault Diagnosis, RUL Prediction (2nd Edition) (Deadline: 15 January 2025)
- Towards Electric Motors and Drives: Condition Monitoring, Performance Prediction and Fault Diagnosis (Deadline: 31 January 2025)
- Design, Performance Optimization and Application of Permanent Magnet Motors (Deadline: 31 January 2025)
- New Trends in Reliability and Lifetime Improvement in Power-Electronic-Controlled Machines and Devices (Deadline: 28 February 2025)
- Fault Diagnostics and Fault Tolerance of Synchronous Electric Drives (Deadline: 28 February 2025)
- Striving toward a Sustainable and More Electrified Future: The Role of Electrical Machines and Drives (Deadline: 28 February 2025)
- Research in Design and Analysis of Permanent Magnet Synchronous Machines (Deadline: 15 March 2025)
- Advancements in Mechanical Power Transmission and Its Elements (Deadline: 31 March 2025)
