Materials

Additive Manufacturing of Advanced Ceramics: Processing, Microstructure, and Functional Performance

edited by

Rodrigo Moreno

and

Mario Borlaf

submission deadline 20 Nov 2026 | Viewed by 112 | Submission Open

Keywords: additive manufacturing; ceramics; processing; microstructure; functional ceramics

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Development of High-Efficiency Microwave Absorbing Materials for Civil and Defense Applications

edited by

Ngo Tran

and Luu Anh Tuyen

submission deadline 20 Nov 2026 | Viewed by 111 | Submission Open

Keywords: microwave absorbing materials; hexaferrites and magnetic properties; EMI shielding and compatibility; MXenes and 2D nanomaterials; composite nanofibers and 1D materials; defect engineering and vacancies; sustainable and bio-based materials; stealth technology and RCS reduction; metamaterials and metasurfaces; millimeter-wave absorption

(This special issue belongs to the Section Materials Physics)

Mechanisms and Interface Engineering in Next-Generation Solid Oxide and Protonic Ceramic Energy Systems

edited by Hafiz Ahmad Ishfaq

submission deadline 20 Nov 2026 | Viewed by 103 | Submission Open

Keywords: solid oxide fuel cell (SOFCs) and electrolyzers (SOECs); protonic ceramic fuel cells (PCFCs) and electrolyzers (PCECs); electrolyte/electrode interfaces; degradation mechanisms; proton-conducting ceramics; mixed ion–electronic conductors (MIECs); microstructural engineering

(This special issue belongs to the Section Energy Materials)

Thin Films: Structural, Optical, Electrical, and Electrochemical Properties

edited by

Shouqin Tian

and

Qiufen Liu

submission deadline 20 Nov 2026 | Viewed by 100 | Submission Open

Keywords: thin films; optoelectronic devices; electrochemical; nano-thin films; functionalized thin films; sustainability and environmental friendliness of materials

(This special issue belongs to the Section Thin Films and Interfaces)

Advanced Metal Welding Technologies and Innovative Engineering Materials Used in the Era of Artificial Intelligence and Energy Transition

edited by

Artur Czupryński

submission deadline 20 Nov 2026 | Viewed by 92 | Submission Open

Keywords: adaptive AI systems; laser welding; hybrid welding; high-strength steels (AHSS); digital twin; industrial internet of things (IIoT); automated welding systems; dissimilar metal joint; energy and environmental optimization

(This special issue belongs to the Section Manufacturing Processes and Systems)

Functional Magnetic Nanomaterials and Nanocomposites: Synthesis, Properties and Advanced Applications

edited by

Łukasz Hawełek

and

Tymon Warski

submission deadline 20 Nov 2026 | Viewed by 85 | Submission Open

Keywords: magnetic nanomaterials; magnetic nanocomposites; nanoparticle synthesis; structure–property relationships; advanced functional applications

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Advanced Icephobic Materials for Aircraft and Vessel Icing Protection

edited by Zichen Zhang,

Junfei Ou

, Guiping Lin and Xiangzhao Wang

submission deadline 20 Nov 2026 | Viewed by 83 | Submission Open

Keywords: icephobic coating; aircraft icing; vessel icing; composite material; SLIPS; electrothermal and photothermal coating; coating durability; arctic and antarctic application

(This special issue belongs to the Section Thin Films and Interfaces)

Green and Circular Materials for Environmental Remediation and Resource Valorization

edited by Ha-Manh Bui, Jheng-Jie Jiang and

Pham Thanh Luu

submission deadline 20 Nov 2026 | Viewed by 70 | Submission Open

Keywords: green materials; circular materials; environmental remediation; resource valorization; biochar; hydrochar; waste-derived materials; catalytic materials; membrane materials; life cycle assessment

(This special issue belongs to the Section Green Materials)

Advances in Fuel Cell: Materials and Devices

edited by

Renata Włodarczyk

and

Andrzej Kacprzak

submission deadline 20 Nov 2026 | Viewed by 66 | Submission Open

Keywords: fuel cells; fuel cell materials; electrocatalysts; membranes and electrolytes; electrode materials; proton exchange membrane fuel cells (PEMFC); solid oxide fuel cells (SOFC); energy conversion technologies; electrochemical energy systems; interconnectors materials; balance of plant

(This special issue belongs to the Section Energy Materials)

Advanced Metallic Materials for Biomedical Implants and Devices

edited by

Sebastian Stach

,

Andrzej Swinarew

and Żaneta Garczyk-Mundała

submission deadline 20 Nov 2026 | Viewed by 32 | Submission Open

Keywords: metallic biomaterials; biomedical implants; surface modification; corrosion resistance; osseointegration; titanium alloys; biodegradable metals; surface characterisation

(This special issue belongs to the Section Biomaterials)

Calcium Phosphate Biomaterials with Medical Applications

edited by

Margareta Gabriela Ciobanu

submission deadline 30 Nov 2026 | 6 articles | Viewed by 9336 | Submission Open

Keywords: biomaterials; calcium phosphates; hydroxyapatite; coatings; scaffolds; composites; biomineralization; delivery systems

(This special issue belongs to the Section Biomaterials)

Advanced Machining and Technologies in Materials Science

edited by

Janusz Kluczyński

submission deadline 30 Nov 2026 | 5 articles | Viewed by 6996 | Submission Open

Keywords: advanced manufacturing; additive manufacturing; hybrid technologies; high-speed machining; production technologies, precision manufacturing

(This special issue belongs to the Section Manufacturing Processes and Systems)

Microstructure Evolution and Mechanical Properties of Metals and Building Materials

edited by

Bartlomiej Jez

and Katarzyna Błoch

submission deadline 30 Nov 2026 | 3 articles | Viewed by 3281 | Submission Open

Keywords: metals alloys; building materials; geopolymers; microstructure evolution

(This special issue belongs to the Section Mechanics of Materials)

Powder Metallurgy and Advanced Materials

edited by

Florin Popa

,

Traian Florin Marinca

,

Bogdan Viorel Neamțu

and

Cǎlin Virgiliu Pricǎ

submission deadline 30 Nov 2026 | 4 articles | Viewed by 3158 | Submission Open

Keywords: powder metallurgy; powder processing; advanced materials; additive manufacturing; spark plasma sintering; functional materials; nanomaterials; nanostructures; biomaterials; microstructure; annealing; simulation and modelling

(This special issue belongs to the Section Metals and Alloys)

MXene-Based Electromagnetic Functional Devices

edited by

Zhifang Liu

and

Weijia Luo

submission deadline 30 Nov 2026 | 2 articles | Viewed by 1336 | Submission Open

Keywords: MXene synthesis; electromagnetic wave absorption; electromagnetic shielding; flexible and wearable devices; multifunctional composites

(This special issue belongs to the Section Electronic Materials)

Obtaining and Characterizing of New Materials (6th Edition)

edited by

György Thalmaier

and

Tamás Mankovits

submission deadline 30 Nov 2026 | 2 articles | Viewed by 1197 | Submission Open

Keywords: additive manufacturing; composite materials; nanomaterials; biomaterials; green synthesis; thin films; smart materials; alloys; laser processing; characterization methods; simulation

(This special issue belongs to the Section Advanced Materials Characterization)

Advanced Materials for Sustainable Industry 5.0

edited by

Dominika Siwiec

and

Andrzej Pacana

submission deadline 30 Nov 2026 | 1 articles | Viewed by 1141 | Submission Open

Keywords: quality; quality management; multi-criteria decision making (MDCM); lean manufacturing (LM); life cycle assessment (LCA); environmental management instruments; sustainable development; Industry 5.0; improving products; production engineering

(This special issue belongs to the Section Manufacturing Processes and Systems)

Microstructure, Properties and Application of Innovative Metallic Materials

edited by

Madalina Simona Baltatu

submission deadline 30 Nov 2026 | 1 articles | Viewed by 1061 | Submission Open

Keywords: metallic materials; properties; new applications; microstructure; structural characterization; thermal properties; obtaining; processing

(This special issue belongs to the Section Metals and Alloys)

Modern Wood-Based Materials for Sustainable Building (2nd Edition)

edited by

Dorota Dukarska

and

Jakub Kawalerczyk

submission deadline 30 Nov 2026 | 1 articles | Viewed by 920 | Submission Open

Keywords: wood and wood-based materials as a sustainable building resource; construction and insulating wood-based materials; composite materials in modern wood construction; green composites; biomass in the manufacture of insulation materials; the role of wood and wood-based materials in reducing carbon emissions; joining techniques for wood and wood-based materials; eco-friendly adhesives; the environmental engineering of eco-friendly materials; the protection of wood and wood-based materials from biotic and abiotic factors; energy-efficient construction solutions based on wood and wood-based materials; a healthy indoor environment in wooden buildings; innovative technologies for the prefabrication of building construction elements; evaluation criteria for sustainable building materials; fire safety in wooden buildings; the durability of wooden buildings in the long term

(This special issue belongs to the Section Construction and Building Materials)

Next-Generation Metal Additive Manufacturing: Intelligent Microstructure Design, Mechanical Reliability, and Advanced Material Systems for Industrial Applications

edited by Kapil Gangwar and

Ramulu Mamidala

submission deadline 30 Nov 2026 | 1 articles | Viewed by 917 | Submission Open

Keywords: fracture mechanics; fatigue and damage tolerance; composite materials and structures; microstructure–property relationships; machining and surface integrity; residual stress mitigation; advanced manufacturing for aerospace components; high-performance ceramics and composites; in-situ monitoring and process control; multi-disciplinary materials and manufacturing integration

(This special issue belongs to the Section Manufacturing Processes and Systems)

Sustainable Utilization of Recycled Construction and Demolition Materials in Cementitious Composites

edited by

Vojtěch Václavík

submission deadline 30 Nov 2026 | 1 articles | Viewed by 799 | Submission Open

Keywords: cementitious composites; recycled aggregates; supplementary cementitious materials; industrial by-products; hydration mechanisms; microstructure characterization; durability performance; structure–property relationships

(This special issue belongs to the Section Construction and Building Materials)

Structural Modification of Third-Generation Solar Cells for Indoor and Outdoor Photovoltaic Applications

edited by

Paweł Gnida

submission deadline 30 Nov 2026 | Viewed by 236 | Submission Open

Keywords: indoor and outdoor photovoltaic; third generation solar cells; dye-sensitized solar cells; bulk heterojunction solar; perovskite solar cells

(This special issue belongs to the Section Energy Materials)

Green Porous Materials for Sustainable Catalysis

edited by

Francesco Parrillo

submission deadline 30 Nov 2026 | Viewed by 194 | Submission Open

Keywords: thermochemical conversion; gasification; pyrolysis; catalysis; waste-derived catalyst; tar conversion; syngas cleaning

(This special issue belongs to the Section Porous Materials)

Recent Advances in Metallic Thin Films and Coatings

edited by Sven Ulrich and

Vincent Ott

submission deadline 30 Nov 2026 | Viewed by 142 | Submission Open

Keywords: thin films; metallics; coatings; PVD; CVD; microstructure; alloys; intermetallics; multiple-principal element alloys; high-entropy alloys

(This special issue belongs to the Section Thin Films and Interfaces)

Advances in Function Geopolymer Materials—Second Edition

edited by

Michał Łach

,

Kinga Korniejenko

and

Aleksandar Nikolov

submission deadline 10 Dec 2026 | 9 articles | Viewed by 14636 | Submission Open

Keywords: geopolymer; functional material; modern insulation material; sustainable development; innovation in building materials

(This special issue belongs to the Section Construction and Building Materials)

Advances in Manufacturing and Materials: Additive Manufacturing and High-Performance Alloys

edited by Jianyu Li and Jinliang Zhang

submission deadline 10 Dec 2026 | 5 articles | Viewed by 4898 | Submission Open

Keywords: solid-state additive manufacturing; aluminium alloys; magnesium alloys; metal matrix composites; stirring friction technologies

(This special issue belongs to the Section Manufacturing Processes and Systems)

Research Advances in Microelectronics Packaging and Devices: From Materials to Reliability

edited by

Zhiheng Huang

submission deadline 10 Dec 2026 | 3 articles | Viewed by 4813 | Submission Open

Keywords: microelectronic packaging; high-power device packaging; materials and device reliability; TSV/TGV; hybrid bonding; AI/ML; microstructure; uncertainty quantification; physical and failure analysis

(This special issue belongs to the Section Electronic Materials)

Magnetic Shape Memory Alloys: Fundamentals and Applications

edited by Zhenzhuang Li and Ziqi Guan

submission deadline 10 Dec 2026 | 3 articles | Viewed by 4699 | Submission Open

Keywords: magnetic shape memory alloys; martensitic transformation; magnetic property; solid-state refrigeration; thermal energy storage

(This special issue belongs to the Section Smart Materials)

Advanced Biomaterials for Dental Applications (2nd Edition)

edited by

Ines Despotović

submission deadline 10 Dec 2026 | 6 articles | Viewed by 4114 | Submission Open

Keywords: multifunctional dental biomaterials; bone tissue engineering approaches; mechanical behavior of dental biomaterials; biocompatibility; osteoinductivity; osteoconductivity; dental coatings; surface modification and surface characterization methods; anticorrosion protection; computational modeling

(This special issue belongs to the Section Biomaterials)

Mechanical Behavior and Multiscale Modeling of Advanced Structural Materials

edited by

Le Chang

and Bojun Zhang

submission deadline 10 Dec 2026 | 5 articles | Viewed by 4010 | Submission Open

Keywords: mechanical behavior; multiscale modeling; lightweight structural materials; microstructure–property relationships; data-driven modeling; deformation mechanisms; extreme service conditions; high-entropy alloys

(This special issue belongs to the Section Materials Simulation and Design)

Sustainable Materials for Renewable Energy Application

edited by Izabela Piasecka, Patrycja Bałdowska-Witos and

Marek Opielak

submission deadline 10 Dec 2026 | 2 articles | Viewed by 2990 | Submission Open

Keywords: sustainable development; clean technology; alternative energy sources; photovoltaic installations; solar installations; wind turbines; heat pumps; biomass installations; fuel cells; sustainable transport; electric vehicle components; alternative fuel systems; life cycle assessment; environmental impact; sustainable materials; bio-based materials; recycled materials; construction materials; smart materials; production techniques; material processing; recycling; energy-saving processes; energy-saving materials

(This special issue belongs to the Section Energy Materials)

New Materials and Methods for Reinforcement and Thermal Improvement of Existing Structures

edited by

Marco Corradi

submission deadline 10 Dec 2026 | 2 articles | Viewed by 2940 | Submission Open

Keywords: green materials; low-carbon composites; bio-based solutions; circular economy; rehabilitation; earthquake engineering; thermal efficiency

(This special issue belongs to the Section Construction and Building Materials)

Organic–Inorganic Composite Materials: From Synthesis and Properties to Applications and Recycling Processes

edited by

Mihaela Baibarac

and

Daniela Berger

submission deadline 10 Dec 2026 | 1 articles | Viewed by 1457 | Submission Open

Keywords: organic–inorganic composites; synthesis; properties; energy storage; sensors; drug delivery; wastewater treatment

(This special issue belongs to the Section Advanced Composites)

Computer Simulations in Electronic and Magnetic Properties of Novel Materials

edited by

Roman Szewczyk

and

Tadeusz Szumiata

submission deadline 10 Dec 2026 | 1 articles | Viewed by 684 | Submission Open

Keywords: magnetic materials modeling; artificial intelligence in materials science; amorphous alloys; nanocrystalline materials; perovskites; piezoelectric materials; open source simulation software; machine learning; magnetoelastic sensors; soft magnetic materials; finite element method; computer-aided material design

(This special issue belongs to the Section Materials Physics)

Advanced Manufacturing of Lightweight Structures: Forming, Simulation, and Green Composites

edited by

Antonio Formisano

submission deadline 10 Dec 2026 | 1 articles | Viewed by 641 | Submission Open

Keywords: lightweight structures; green composites; advanced manufacturing; thermomechanical properties; modeling and simulation; recycling; end-of-life

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advancements in Durability and Mechanical Performance of Hybrid Fiber Reinforced Polymers in Harsh Environments

edited by Ahmed Bahgat Radwan and

Noora Al-Qahtani

submission deadline 10 Dec 2026 | Viewed by 384 | Submission Open

Keywords: hybrid fiber-reinforced polymers (HFRPs); durability; mechanical performance; extreme environments; aging and degradation; interfacial adhesion; composite manufacturing; structural integrity; protective coatings; sustainability and recycling

(This special issue belongs to the Section Polymeric Materials)

Synthesis, Properties and Applications of Functional Heterocyclic Compounds and Related Materials

edited by

Agnieszka Kącka-Zych

submission deadline 10 Dec 2026 | Viewed by 178 | Submission Open

Keywords: heterocyclic compounds; synthesis; properties; applications; bioactive compounds; cycloadditions; density functional theory; mechanism; natural products

(This special issue belongs to the Section Materials Chemistry)

Current Advances in Luminescent Materials

edited by

Michał Filapek

and Patrycja Filipek

submission deadline 10 Dec 2026 | Viewed by 150 | Submission Open

Keywords: luminogenic materials; fluorescence probes and markers; organic optoelectronics; OLEDs; device processing; donor–acceptor molecule; organic synthesis; push–pull organic molecules; nonlinear optical materials; dyes and sensors

(This special issue belongs to the Section Materials Chemistry)

Size-Dependent and Surface/Interface Effects in Materials

edited by

Yongfu Zhu

submission deadline 10 Dec 2026 | Viewed by 125 | Submission Open

Keywords: size effect; nanocrystals; nanostructured materials; surface; interface; chemical and physical properties

(This special issue belongs to the Section Materials Physics)

Functional Cement-Based Composites for Civil Engineering (3rd Edition)

edited by

Jonathan Oti

submission deadline 20 Dec 2026 | 5 articles | Viewed by 8384 | Submission Open

Keywords: building materials; durability; recycled materials; cement; concrete; stabilization; life cycle assessment; bricks; block; mortar; geo-polymer; steel; timber; green building materials; eco-friendly materials; nano- and fiber composites; ceramics; limes; PFA; GGBS

(This special issue belongs to the Section Construction and Building Materials)

High-Entropy Alloys: Synthesis, Characterization, and Applications

edited by

Bernardo Monteiro

and Marta Dias

submission deadline 20 Dec 2026 | 6 articles | Viewed by 8155 | Submission Open

Keywords: high-entropy alloys; preparation methods; material characterization; applications; design of HEAs (empirical method, CALPHAD, molecular dynamics, Monte Carlo, artificial intelligence, and machine learning); powder metallurgy

(This special issue belongs to the Section Metals and Alloys)

Advanced Steel Materials: 3D Printing, Phase Transformation, and Mechanical Properties

edited by

Wojciech Sitek

and

Mariusz Król

submission deadline 20 Dec 2026 | 5 articles | Viewed by 5493 | Submission Open

Keywords: advanced steels; 3D printing; high-strength steels; stainless steels; high-performance steels; microstructure; phase transformations; mechanical properties; hybrid technologies

(This special issue belongs to the Section Metals and Alloys)

Corrosion Behavior and Mechanical Properties of Metallic Materials (3rd Edition)

edited by Xiaogang Li and

Zulfiqar Ahmad Khan

submission deadline 20 Dec 2026 | 11 articles | Viewed by 5359 | Submission Open

Keywords: metallic materials; corrosion behavior; mechanical properties; microstructure; anti-corrosion methods; corrosion-resistant material; hydrogen embrittlement; electrochemical reaction

(This special issue belongs to the Section Corrosion)

Advanced Thermoelectric Materials and Micro/Nanoscale Heat Transfer

edited by Ziman Wang,

Xinyu Wang

and Man Wang

submission deadline 20 Dec 2026 | 3 articles | Viewed by 5330 | Submission Open

Keywords: thermoelectric materials; power generation; thermoelectric cooling; micro/nanoscale heat transfer; micro/nanoscale interface; phase change; thermophysical properties; phonon and electron transport

(This special issue belongs to the Section Electronic Materials)

Effects of Adding Cement Admixtures on the Microstructure and Properties of Cement Materials (2nd Edition)

edited by Hongwei Wang and Ying Shi

submission deadline 20 Dec 2026 | 4 articles | Viewed by 5254 | Submission Open

Keywords: cement admixtures; microstructure; hydration process; mechanical properties; durability; compressive strength; tensile strength; chemical admixtures; supplementary cementitious materials (SCMS); cement paste; concrete performance; permeability; shrinkage; cracking resistance; sustainable construction materials; high-performance concrete; carbon emissions reduction; durability enhancement

(This special issue belongs to the Section Construction and Building Materials)

High-Performance Concrete: Synergies Between Material Innovation and Structural Health Monitoring

edited by

,

,

, Tao Jin and

submission deadline 20 Dec 2026 | 7 articles | Viewed by 4989 | Submission Open

Keywords: high-performance concrete; fiber reinforcement; ultra-high-performance concrete (UHPC); sustainable construction materials; engineered cementitious composites (ECCs); nanomaterials in concrete; structural health monitoring; non-destructive testing; smart sensors; machine learning applications

(This special issue belongs to the Section Construction and Building Materials)

Advances in 3D Printing Technologies: Design, Manufacturing, and Applications

edited by

Chenchen Tian

, Yi Lu and Quanquan Han

submission deadline 20 Dec 2026 | 4 articles | Viewed by 4547 | Submission Open

Keywords: 3D printing; additive manufacturing; design and optimization; modeling and simulation; material and process; quality and detection

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advanced Metallic and Ceramics Composites: Preparation, Properties and Applications

edited by

Jarosław Woźniak

submission deadline 20 Dec 2026 | 4 articles | Viewed by 4131 | Submission Open

Keywords: 2D materials; MXenes; graphene; MAX phases; ceramic and metallic matrix composites; mechanical properties; microstructure

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Advanced Design and Synthesis in Piezoelectric Smart Materials

edited by Long Jin

submission deadline 20 Dec 2026 | 3 articles | Viewed by 3534 | Submission Open

Keywords: piezoelectric ceramics; piezoelectric polymers; piezoelectric composites; structure design; material synthesis; sensors; actuators; energy harvesting

(This special issue belongs to the Section Smart Materials)

Advanced Welding Technologies and Additive Manufacturing of Alloys and Metals (3rd Edition)

edited by Ting Wang and Ke Han

submission deadline 20 Dec 2026 | 3 articles | Viewed by 3340 | Submission Open

Keywords: welding; additive manufacturing; microstructure; mechanical properties

(This special issue belongs to the Section Manufacturing Processes and Systems)

Multi-Scale Study on Strength and Structural Stability of Low-Carbon Construction Materials

edited by

Shan Gao

submission deadline 20 Dec 2026 | 4 articles | Viewed by 2606 | Submission Open

Keywords: multi-scale; low-carbon; construction materials; aggregates; recycling

(This special issue belongs to the Section Construction and Building Materials)

Advanced Scintillator and Detector Materials for Radiation Physics and Nuclear Medicine

edited by

Yuriy Zorenko

and Janusz Winiecki

submission deadline 20 Dec 2026 | 4 articles | Viewed by 2538 | Submission Open

Keywords: scintillators; radioluminescence; crystals; films; oxides; radiation physics; nuclear medicine

(This special issue belongs to the Section Optical and Photonic Materials)

Research on Vibration of Composite Structures

edited by Rui Zhong, Qingshan Wang and Zhengxiong Chen

submission deadline 20 Dec 2026 | 4 articles | Viewed by 2536 | Submission Open

Keywords: composite structures; vibration modeling and analysis; analytical and numerical methods; experimental characterization; vibration control and optimization

(This special issue belongs to the Section Advanced Composites)

Functionalized Ceramics and Their Composites: Preparation, Properties and Applications—2nd Edition

edited by Ranran Su and Hongliang Zhang

submission deadline 20 Dec 2026 | 2 articles | Viewed by 2257 | Submission Open

Keywords: functionalized ceramics; composites; processing; composition tailoring

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Sustainable Thermoelectric Materials and Energy Conversion Systems

edited by

Chun-I Wu

submission deadline 20 Dec 2026 | 2 articles | Viewed by 2145 | Submission Open

Keywords: thermoelectric materials; sustainable energy conversion; green manufacturing; lifecycle assessment; waste heat recovery; environmental impact; resource efficiency; energy harvesting

(This special issue belongs to the Section Energy Materials)

Advances in Microstructure and Mechanical Behavior of High-Strength Steels

edited by Yuhe Huang and

Shuize Wang

submission deadline 20 Dec 2026 | 4 articles | Viewed by 2083 | Submission Open

Keywords: high-strength steels; microstructure design; mechanical behavior; strength ductility balance; lightweight automotive steels; grain refinement; precipitation strengthening; deformation mechanisms; advanced characterization; sustainable steel materials

(This special issue belongs to the Section Metals and Alloys)

Resilient Building Materials and Structural Systems for Extreme Environments

edited by

Alireza Bahrami

submission deadline 20 Dec 2026 | 2 articles | Viewed by 2078 | Submission Open

Keywords: high-performance materials; resilient building materials; extreme environment design; corrosion-resistant structures; disaster-resilient infrastructure; sustainable construction; cold-climate engineering; seismic-resilient systems; flood-resistant materials; adaptive structural solutions

(This special issue belongs to the Section Construction and Building Materials)

Advanced Rare Earth Doped Functional Materials

edited by Khaldoon Nasser,

Laeticia Petit

and Nirajan Ojha

submission deadline 20 Dec 2026 | 2 articles | Viewed by 1915 | Submission Open

Keywords: rare-earth ions; structure and material design; novel functional materials; glass, glass ceramic, crystals; luminescence; laser and gain media

(This special issue belongs to the Section Optical and Photonic Materials)

Advances in Irradiation Effects of Materials for Current and Future Reactors

edited by

Ferenc Gillemot

and

Murthy Kolluri

submission deadline 20 Dec 2026 | 1 articles | Viewed by 1901 | Submission Open

Keywords: irradiation; transmutation; ageing; steel corrosion; fusion power plant

(This special issue belongs to the Section Materials Physics)

Advances in Material Characterization and Pavement Modeling (2nd Edition)

edited by

Guozhi Fu

, Yi Li, Zhanchuang Han,

Mingchen Li

and

Yiren Sun

submission deadline 20 Dec 2026 | 3 articles | Viewed by 1376 | Submission Open

Keywords: material characterization; pavement modeling; recycled paving materials; long-term performance evaluation; sustainability; environmental efficiency; airport runways and highway structures

(This special issue belongs to the Section Construction and Building Materials)

Polymer Composites Reinforced by Metallic Architectures and Inserts

edited by

Cristiano Fragassa

,

Ana Pavlovic

and

Carlo Santulli

submission deadline 20 Dec 2026 | 1 articles | Viewed by 1290 | Submission Open

Keywords: polymer–metal hybrid composites; metallic architectures in composites; embedded metal reinforcements; architected metal inserts; metal–polymer interface engineering; load transfer and interfacial adhesion; multifunctional composite materials; impact and energy absorption behavior; hybrid additive manufacturing (polymer–metal); topology-driven composite design

(This special issue belongs to the Section Polymeric Materials)

Advanced Functional Materials in Energy Storage and Conversion

edited by Bei Li

submission deadline 20 Dec 2026 | 1 articles | Viewed by 1270 | Submission Open

Keywords: catalysis; CO2 conversion; hydrogen production; energy storage and conversion; sustainable energy technologies; modelling and simulation; machine learning; in situ characterization; green synthesis

(This special issue belongs to the Section Energy Materials)

Thermodynamic Modeling, Microstructural Design and Surface Engineering of Advanced Metal Alloys

edited by

Ligang Zhang

and Min-suk Oh

submission deadline 20 Dec 2026 | 2 articles | Viewed by 1092 | Submission Open

Keywords: corrosion resistance; surface technology; thermodynamic modeling; composite coating; microstructural design; metal additive manufacturing; metals and alloys; metal matrix composites

(This special issue belongs to the Section Metals and Alloys)

Multifunctionalization of Polymer Composites for Improved Thermal Performance

edited by

Marta Worzakowska

submission deadline 20 Dec 2026 | 1 articles | Viewed by 982 | Submission Open

Keywords: polymer composites; multifunctionalization; reinforcements; thermal performance; properties; applications

(This special issue belongs to the Section Polymeric Materials)

Computational Simulation for Material Applications: From Density Functional Theory (DFT) to Molecular Dynamics (MD)

edited by

Mehrdad Faraji

submission deadline 20 Dec 2026 | 2 articles | Viewed by 981 | Submission Open

Keywords: computational materials simulation ; density functional theory (DFT) ; molecular dynamics (MD) ; multiscale modeling; condensed matter physics ; structural properties ; electronic and optical properties ; charge transfer mechanisms ; 2D materials ; nanophysics ; machine learning

(This special issue belongs to the Section Materials Simulation and Design)

Intelligent Construction in Civil Engineering: Additive Manufacturing of Cementitious Materials and Concrete

edited by Chengfang Yuan and

Zhanqi Cheng

submission deadline 20 Dec 2026 | 2 articles | Viewed by 832 | Submission Open

Keywords: intelligent construction; additive manufacturing; 3D printing; cement-based materials; concrete

(This special issue belongs to the Section Construction and Building Materials)

Leather, Textiles and Bio-Based Materials (2nd Edition)

edited by

Valeika Virgilijus

submission deadline 20 Dec 2026 | 1 articles | Viewed by 811 | Submission Open

Keywords: leather processing; collagen changes; tanning; application of enzymes; wool; textile functions; natural fiber biocompatibility; composites containing bio-based materials; biodegradability of biomaterials; hydrolysis of biomaterials; life cycle assessment

(This special issue belongs to the Section Biomaterials)

Next-Generation Sorbent Materials: From Fundamentals to Applications

edited by

Paweł Staroń

and

Jarosław Chwastowski

submission deadline 20 Dec 2026 | 1 articles | Viewed by 766 | Submission Open

Keywords: sorbent materials; adsorption; bio-based sorbents; nanomaterials; porous materials; environmental remediation; heavy metal removal; adsorption mechanisms; material design; resource recovery

(This special issue belongs to the Section Porous Materials)

Advanced Materials in Implant and Prosthetic Dentistry: From Innovation to Clinical Application

edited by

Tonino Traini

and

Eugenio Velasco-Ortega

submission deadline 20 Dec 2026 | Viewed by 754 | Submission Open

Keywords: implant materials; prosthetic materials; surface modification; biocompatibility; CAD/CAM; dental ceramics; titanium alloys; bioactive surfaces; bone–implant interface; digital dentistry

(This special issue belongs to the Section Biomaterials)

Welding, Joining and Additive Manufacturing of Metals and Alloys (Fourth Edition)

edited by

Damjan Klobcar

,

Tomaž Vuherer

and Drago Bračun

submission deadline 20 Dec 2026 | 2 articles | Viewed by 663 | Submission Open

Keywords: welding and joining technologies; brazing and soldering; additive manufacturing; adhesive bonding; weldability of materials

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Renewable Energy Materials and Integrated Solutions

edited by Ahmed Ennaoui, Charaf Hajjaj and Abdeltif Bouaichi

submission deadline 20 Dec 2026 | Viewed by 662 | Submission Open

Keywords: renewable energy systems; photovoltaic technology; concentrated solar power (CSP); energy storage solutions; smart grids; green hydrogen; electric mobility; water–energy–food nexus; energy transition; sustainable energy integration

(This special issue belongs to the Section Energy Materials)

Nanomaterials for Enhanced Photoluminescence: Design, Synthesis, and Applications

edited by

Adam Watras

and

Rafał Jakub Wiglusz

submission deadline 20 Dec 2026 | 1 articles | Viewed by 626 | Submission Open

Keywords: rare-earth-doped nanomaterials; inorganic phosphors; lanthanide luminescence; up-conversion/down-shifting; energy transfer mechanisms; optical sensing

(This special issue belongs to the Section Optical and Photonic Materials)

Advanced Fibrous Materials

edited by

Can Ge

, Fan Feng and Muhammad Ahmad

submission deadline 20 Dec 2026 | 1 articles | Viewed by 626 | Submission Open

Keywords: fiber surface and interface; fiber manufacturing and characterization; biomedical fibers; yarn processing; smart textiles; wearable electronics; technology

Advancements in Optical Materials and Photonic Device Technologies—2nd Edition

edited by Ivan Zorin and

Bettina Heise

submission deadline 20 Dec 2026 | 1 articles | Viewed by 621 | Submission Open

Keywords: advanced optial materials; enhanced optical properties; glasses; photonic crystals; semiconductors; optical fibers; nonlinear crystals; metamaterials; material aspects of photonic devices; coatings

(This special issue belongs to the Section Optical and Photonic Materials)

Cement-Based/Non-Cement-Based Construction Materials: Multiscale Mechanics Under Diverse Loadings (Second Edition)

edited by

,

,

and

submission deadline 20 Dec 2026 | 2 articles | Viewed by 613 | Submission Open

Keywords: cement-based materials; non-cement-based materials; multiscale modeling; strain rate effects; dynamic mechanical behavior; damage and fracture mechanisms; composite structures; experimental testing; simulation method; machine learning

(This special issue belongs to the Section Construction and Building Materials)

Advanced Materials for Radiation Protection and Shielding

edited by

İskender Akkurt

, Seher Polat and

Sabiha Anas Boussaa

submission deadline 20 Dec 2026 | Viewed by 609 | Submission Open

Keywords: material science; AI application on material science; AI application on radiation; radiation physics; shielding materials; radiation protection; natural radioactivity; radiation measurement

(This special issue belongs to the Section Electronic Materials)

Future Trends in High-Entropy Alloys (3rd Edition)

edited by

Jason Shian-Ching Jang

and Tsai-Fu Chung

submission deadline 20 Dec 2026 | 1 articles | Viewed by 608 | Submission Open

Keywords: high-entropy alloys (HEAs); medium-entropy alloys (MEAs); high-entropy alloy thin film; computational alloy design; phase diagram; microstructure characterization; mechanical properties; thermomechanical treatment; hetero-structural microstructure; functional application

(This special issue belongs to the Section Metals and Alloys)

Advanced Materials: Process, Properties, and Applications—Second Edition

edited by

Pradeep Menezes

submission deadline 20 Dec 2026 | Viewed by 512 | Submission Open

Keywords: cermet; high-entropy alloys; functional-grade materials; advanced high-strength steels; nanomaterials and nanocomposites; self-lubricating materials; MAX phase materials—MXenes; additive manufacturing; microstructural characterization; mechanical properties; computational modeling and simulations

(This special issue belongs to the Section Manufacturing Processes and Systems)

Modeling and Analysis of Composite Materials and Structures in Civil Engineering (3rd Edition)

edited by

Yiming Zhang

, Linlong Mu and Jiale Li

submission deadline 20 Dec 2026 | 1 articles | Viewed by 499 | Submission Open

Keywords: composite structures; construction materials; mechanical behavior; modeling and simulations; cement-based materials strength; damage; fatigue; structural performance; machine learning

(This special issue belongs to the Section Construction and Building Materials)

Advanced Micro/Nanomaterials for Electronic Packaging and Energy Storage

edited by

Shang Wang

, Malik Dishad Khan and

Shuyue Li

submission deadline 20 Dec 2026 | 1 articles | Viewed by 483 | Submission Open

Keywords: micro/nano-scale materials; electronic packaging; energy harvesting and storage; interface engineering; thermal management; multifunctional integration

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Advanced Materials for Heritage and Archaeology (Third Edition)

edited by

Angela Calia

and

Mariateresa Lettieri

submission deadline 20 Dec 2026 | 1 articles | Viewed by 468 | Submission Open

Keywords: archeology and heritage buildings; non-destructive or micro-destructive analysis of cultural heritage plasters, ceramics, potteries and glasses; non-destructive techniques for surface characterization; residue analysis; investigation of raw materials and production methods of ancient technologies; investigation of weathering effects; material conservation technologies; heritage building protection; nanomaterials; monitoring technologies

(This special issue belongs to the Section Advanced Materials Characterization)

New Perspectives in Welding and Joining Processes of Metallic Materials—Second Edition

edited by

Fabio Giudice

and

Cristina Scolaro

submission deadline 20 Dec 2026 | Viewed by 427 | Submission Open

Keywords: welding techniques; fusion welding; solid-state welding; process simulation and setting; weldability of metals; defects; residual stress and distortion; non-destructive testing; metallurgical characterization; mechanical properties; welding and joining sustainability

(This special issue belongs to the Section Metals and Alloys)

Polymer Foams and Their Multifunctional Application

edited by Jialong Chai, Jinchuan Zhao and Ya Liu

submission deadline 20 Dec 2026 | Viewed by 366 | Submission Open

Keywords: polymer foams; multifunctional materials; cellular structure; supercritical foaming; nanocomposite foams; thermal management; shielding and insulation; absorption and filtration; sustainable materials

(This special issue belongs to the Section Polymeric Materials)

Thermoelectric Thin Films, Thick Films, and Composites: From Materials to Devices

edited by

Seungki Jo

submission deadline 20 Dec 2026 | Viewed by 345 | Submission Open

Keywords: thermoelectrics; thin films; thick films; composites; 3D printing; hybrid materials; wearable devices; energy harvesting

(This special issue belongs to the Section Electronic Materials)

Terahertz Materials and Technologies in Materials Science (Second Edition)

edited by Meng Liu,

Guanhua Ren

and Xueqian Zhang

submission deadline 20 Dec 2026 | 1 articles | Viewed by 343 | Submission Open

Keywords: terahertz; metasurfaces; light field manipulation; dynamic control; active medium; terahertz spectroscopy

(This special issue belongs to the Section Optical and Photonic Materials)

Development and Application of Adhesive Bonding in Structural, Civil, Mechanical, Aeronautical and Industrial Fields

edited by

Marco Lamberti

, Francesco Ascione,

Aurelien Maurel-Pantel

and

Frédéric Lebon

submission deadline 20 Dec 2026 | Viewed by 339 | Submission Open

Keywords: adhesive; fem; interface; cohesive; mechanical behavior; fracture mechanics; experiments

(This special issue belongs to the Section Advanced Composites)

Laser Processing for Materials Fabrication and Surface Engineering

edited by

Shibing Liu

and

Haiying Song

submission deadline 20 Dec 2026 | Viewed by 329 | Submission Open

Keywords: laser processing; laser materials fabrication; laser surface engineering; laser high-precision; laser intelligent manufacturing

(This special issue belongs to the Section Manufacturing Processes and Systems)

Non-Destructive Testing in Industrial Applications

edited by Grzegorz Tytko,

Anna Knitter-Piątkowska

and Alessandro Sardellitti

submission deadline 20 Dec 2026 | 1 articles | Viewed by 321 | Submission Open

Keywords: non-destructive testing; defectoscopy; diagnostics; damage assessment; industrial inspections; material engineering; artificial intelligence in NDT; structural integrity; material characterization

(This special issue belongs to the Section Advanced Materials Characterization)

Advances in 3D Concrete Printing: Design, Materials and Construction

edited by

Mustafa Batikha

,

Adil Tamimi

and

Samer Al Martini

submission deadline 20 Dec 2026 | 1 articles | Viewed by 319 | Submission Open

Keywords: 3D concrete printing; fresh and hardened concrete properties for 3D concrete printing; interlayer bonding, interface mechanics, and anisotropy in 3D concrete printed materials; flexural behaviour of 3D concrete printed elements; geometrical optimisation of 3D concrete printed elements; standardisation frameworks for 3D concrete printing; reinforcement strategies for 3D concrete printing; long-term durability performance of 3D concrete printed elements; applications of geopolymer in 3D concrete printing; holistic approach for 3D concrete printing; on-site concrete printing strategies; cost analysis of 3D concrete printing in construction; assessment of the carbon footprint in 3D concrete printing; modular and prefabricated construction enabled by 3D concrete printing; project planning, logistics, and construction management for modular 3D concrete printing systems; monitoring, quality control, and structural health assessment of 3D concrete printed structures; digital twins, data-driven modelling, and real-time process control in 3D concrete printing

(This special issue belongs to the Section Construction and Building Materials)

Durability and Performance of Sustainable Concrete

edited by Tomasz Ponikiewski and

Andrzej Cwirzen

submission deadline 20 Dec 2026 | Viewed by 302 | Submission Open

Keywords: concrete technology; special concretes; self-compacting concrete; fibre-reinforced concrete; X-ray computed tomography research; non-destructive testing (NDT) of concrete; 3D-printed building materials; waste and recycled materials

(This special issue belongs to the Section Construction and Building Materials)

Next-Generation Pavement Materials: Durability and Sustainability

edited by

Greg White

submission deadline 20 Dec 2026 | Viewed by 292 | Submission Open

Keywords: life cycle analysis; sustainability; resiliency; asphalt; concrete; pavement

(This special issue belongs to the Section Construction and Building Materials)

Recent Advances in Plasma Technology for Materials Science

edited by

Shih-Nan Hsiao

submission deadline 20 Dec 2026 | Viewed by 266 | Submission Open

Keywords: coating; thin film deposition; surface functionalization; plasma etching; plasma synthesis; ALD/ALE; bio-medical and agricultural applications; atmospheric pressure plasma

(This special issue belongs to the Section Manufacturing Processes and Systems)

Performance Enhancement of New and Existing Concrete and Masonry Structural Materials

edited by

Marco Lamberti

and

Annalisa Napoli

submission deadline 20 Dec 2026 | Viewed by 258 | Submission Open

Keywords: concrete; masonry; debonding; FRP/FRCM/TRM; sustainable materials; interface behaviour; green concrete; HPFRC; aging

(This special issue belongs to the Section Construction and Building Materials)

Structure and Properties of Rapidly Solidified High-Entropy Alloys

edited by

Rafał Babilas

submission deadline 20 Dec 2026 | Viewed by 226 | Submission Open

Keywords: multi-principal component alloys; high-entropy alloys; metallic glasses; rapid solidification; crystalline, nanocrystalline, and metastable materials; structural characterization and modelling; anticorrosion and electrochemical properties; magnetic properties; mechanical properties; wear resistance

(This special issue belongs to the Section Metals and Alloys)

Machine Learning and AI in Materials Design and Discovery

edited by Shunda Chen

submission deadline 20 Dec 2026 | Viewed by 220 | Submission Open

Keywords: machine learning; artificial intelligence; materials informatics; materials discovery; materials design; machine learning interatomic potentials; generative models for materials; high-throughput materials screening; computational materials science; inverse materials design

(This special issue belongs to the Section Materials Simulation and Design)

Novel Materials for Sound-Absorbing Applications—Second Edition

edited by Eulalia Gliścińska

submission deadline 20 Dec 2026 | Viewed by 219 | Submission Open

Keywords: sound-absorbing material; sound frequency; impedance tube; technology; material composition; structure; surface; modification; additives; functional properties

(This special issue belongs to the Section Materials Physics)

Additive Manufacturing of Advanced Metallic Composite Materials

edited by

Behzad Sadeghi

and

Pradyumn Kumar Arya

submission deadline 20 Dec 2026 | Viewed by 216 | Submission Open

Keywords: additive manufacturing; metal matrix composite; microstructure; mechanical properties; machine learning; wear; corrosion; heat treatment; finite element analysis

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Powder Metallurgy Processes and Materials

edited by

Andrzej Miklaszewski

submission deadline 20 Dec 2026 | Viewed by 213 | Submission Open

Keywords: powder metallurgy; innovative approach in powder sintering and processing; current and microwave-assisted sintering; in situ materials processing; structure size; strain and morphology factors

(This special issue belongs to the Section Manufacturing Processes and Systems)

The Study of the Structure, Properties, and Surface Features of Biomimetic Metamaterials

edited by

Shyh-Chour Huang

submission deadline 20 Dec 2026 | Viewed by 207 | Submission Open

Keywords: biomimetic metamaterials; hierarchical structures; mechanical properties; surface engineering; multiscale design; negative poisson’s ratio; wave manipulation; additive manufacturing; functional surfaces; energy absorption

(This special issue belongs to the Section Smart Materials)

Materials for Electrochemical Energy Storage

edited by Qiangchao Sun

submission deadline 20 Dec 2026 | Viewed by 195 | Submission Open

Keywords: electrochemical energy storage; battery materials; solid-state electrolytes; electrode architectures; degradation mechanisms; sustainable material resources; dendrite suppression; aqueous battery chemistry

(This special issue belongs to the Section Energy Materials)

Journal Menu

Journal Browser

Special Issues

Further Information

Guidelines

MDPI Initiatives

Follow MDPI