Reviewer Board
Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Faculty of Engineering, Department of Industrial Engineering and Management, Lucian Blaga University of Sibiu, Sibiu, Romania
Interests: rubber; composite materials; material testing
Interests: rubber; composite materials; material testing
Faculty of Materials Engineering, Silesian University of Technology, Gliwice, Poland
Interests: composites; metal matrix composites (MMCs); fabrication of MMCs (mechanical stirring; infiltration; centrifugal casting); interpenetrating composite structure (IPCs); light alloys (Al, Mg); Microstructure; properties
Interests: composites; metal matrix composites (MMCs); fabrication of MMCs (mechanical stirring; infiltration; centrifugal casting); interpenetrating composite structure (IPCs); light alloys (Al, Mg); Microstructure; properties
Instituto de Química Orgánica (IQOG) del Consejo Superior de Investigaciones Científicas (CSIC), Juan de la Cierva, Madrid, Spain
Interests: selenium; anticancer research; antibacterial activity; cancer multidrug resistance; bacterial multidrug resistance; efflux pumps; medicinal chemistry; organic synthesis; selenium chemistry; antifungal activity; antibiotics; biofilms; selenium nanoparticles
Interests: selenium; anticancer research; antibacterial activity; cancer multidrug resistance; bacterial multidrug resistance; efflux pumps; medicinal chemistry; organic synthesis; selenium chemistry; antifungal activity; antibiotics; biofilms; selenium nanoparticles
Department of Physics and Chemistry of Materials, Institute of Metals and Technology, Lepi pot 11, 1000 Ljubljana, Slovenia
Interests: corrosion; laser ablation; surface science; stainless steel; porous metals; additive manufacturing; EBSD; aes; XPS of thin oxide layers; FIB SEM; EDS/WDS
Interests: corrosion; laser ablation; surface science; stainless steel; porous metals; additive manufacturing; EBSD; aes; XPS of thin oxide layers; FIB SEM; EDS/WDS
Department of Electromechanical Engineering, University of Beira Interior, Covilhã, Portugal
Interests: composites; polymer nanocomposites; additive manufacturing; mechanical characterization; graphene related composites; bonded repair
Interests: composites; polymer nanocomposites; additive manufacturing; mechanical characterization; graphene related composites; bonded repair
Institute of Dentistry, Faculty of Medicine, Vilnius University, Vilnius, Lithuania
Interests: sustainability; design; materials; resistance; construction; performance; testing; moisture; road; APT; binder; asphalt; bitumen; pavement; cracking; asphalt mixture; aggregate; highway; recycled; rutting
Interests: sustainability; design; materials; resistance; construction; performance; testing; moisture; road; APT; binder; asphalt; bitumen; pavement; cracking; asphalt mixture; aggregate; highway; recycled; rutting
Laboratoire de Mécanique Gabriel Lamé, Université de Tours, Tours, France
Interests: machining; cryogenic; additive manufacture
Interests: machining; cryogenic; additive manufacture
Lavrentyev Institute of Hydrodynamics SB RAS, Novosibirsk, Russia
Interests: mechanical properties; powder processing; metal matrix composites; microstructure design; field-assisted sintering; reactive sintering; formation and evolution of interfaces in composite materials
Interests: mechanical properties; powder processing; metal matrix composites; microstructure design; field-assisted sintering; reactive sintering; formation and evolution of interfaces in composite materials
Los Alamos National Laboratory, Los Alamos, NM 87545, USA
Interests: polymers; radiation; bioplastics; materials; aging
Interests: polymers; radiation; bioplastics; materials; aging
Department of Materials Technology, Faculty of Advanced Technologies & Chemistry, Military University of Technology, 00-908 Warsaw, Poland
Interests: additive manufacturing; metals and alloys; relationship between structure and structural and functional properties of metals and alloys; functional graded materials and composites; powder metallurgy; CNC machining
Interests: additive manufacturing; metals and alloys; relationship between structure and structural and functional properties of metals and alloys; functional graded materials and composites; powder metallurgy; CNC machining
Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in Bratislava, 2781/25 Jána Bottu, 917 24 Trnava
Interests: alumiunium alloys; quasicrystals; complex metallic alloys; electron microscopy; microstructural characterization; X-ray diffraction; phase equilibria; phase diagrams; thermal analysis
Interests: alumiunium alloys; quasicrystals; complex metallic alloys; electron microscopy; microstructural characterization; X-ray diffraction; phase equilibria; phase diagrams; thermal analysis
Faculty of Civil and Environmental Engineering and Architecture, Bydgoszcz University of Science and Technology, Bydgoszcz, Poland
Interests: wind engineering; earthquakes; damping systems; spectral element method; concrete mixtures; composites materials
Interests: wind engineering; earthquakes; damping systems; spectral element method; concrete mixtures; composites materials
Department of Chemistry, Faculty of Science, Western University,
London, ON, Canada
Interests: corrosion; cell-material interactions; analytical electrochemistry; corrosion electrochemistry; development of corrosion inhibition routes for industrial material protection with special interests in protective coatings/inhibitor designs for biocorrosion/biofouling remediation
Interests: corrosion; cell-material interactions; analytical electrochemistry; corrosion electrochemistry; development of corrosion inhibition routes for industrial material protection with special interests in protective coatings/inhibitor designs for biocorrosion/biofouling remediation
Mechanical Engineering, Texas Tech University, Lubbock, TX 79409, USA
Interests: biomaterials; polymers; scaffolds; tissue engineering; design; optimization; muscle; food; mechanics; additive manufacturing; 3D printing; finite element analysis; lattices; architected structures
Interests: biomaterials; polymers; scaffolds; tissue engineering; design; optimization; muscle; food; mechanics; additive manufacturing; 3D printing; finite element analysis; lattices; architected structures
Faculty of Engineering and Mathematics, Bielefeld University of Applied Sciences, 33619 Bielefeld, Germany
Interests: magnetism; 3D printing; textile technologies; polymer
Interests: magnetism; 3D printing; textile technologies; polymer
Department of Silicate Technology, Faculty of Chemical Technology, Kaunas University of Technology, Kaunas, Lithuania
Interests: hydrothermal synthesis; hydration properties and products; cement; synthetic additive and application in cement chemistry and etc.; calcium silicate hydrates; calcium aluminate hydrate; microcalorimetry analysis; thermal stability; heavy metals ions - adsorption properties and immobilization in cement stone; XRD, STA, BET, FT-IR analysis
Interests: hydrothermal synthesis; hydration properties and products; cement; synthetic additive and application in cement chemistry and etc.; calcium silicate hydrates; calcium aluminate hydrate; microcalorimetry analysis; thermal stability; heavy metals ions - adsorption properties and immobilization in cement stone; XRD, STA, BET, FT-IR analysis
Particles and Process Engineering, University of Bremen, Mechanical Process Engineering, Bremen, Germany
Interests: melt atomization; droplet generation; additive manufacturing; materials design; high throughput; spray forming; rapid solidification
Interests: melt atomization; droplet generation; additive manufacturing; materials design; high throughput; spray forming; rapid solidification
Department of Physics, Faculty of Sciences and Technology, University of Coimbra, 3004-531 Coimbra, Portugal
Interests: mechanics of materials; materials design; fabrication; optimum design; modeling; renewable energy; sustainable mobility; thermodynamics; energy conversion; quantum energy & condensed matter; materials physics; transport properties; composites; tribology; micro/nano-machines
Interests: mechanics of materials; materials design; fabrication; optimum design; modeling; renewable energy; sustainable mobility; thermodynamics; energy conversion; quantum energy & condensed matter; materials physics; transport properties; composites; tribology; micro/nano-machines
Faculty of Chemical Engineering and Biotechnologies, Department of Science and Engineering of Oxide Materials and Nanomaterials, University Politehnica of Bucharest, Bucharest, Romania
Interests: thin films; interfaces; sputtering; nanomaterials; thin films deposition methods; biomaterials; 3D printed scaffolds; advanced ceramics; characterization methods (X-ray diffraction and electron microscopy)
Interests: thin films; interfaces; sputtering; nanomaterials; thin films deposition methods; biomaterials; 3D printed scaffolds; advanced ceramics; characterization methods (X-ray diffraction and electron microscopy)
Institute of Physics of Advanced Materials, Ufa State Aviation Technical University, Ulitsa Karla Marksa, 12, Ufa, Republic of Bashkortostan 450077, Russia
Interests: severe plastic deformation; nanostructured and ultrafine-grained materials; X-ray analysis; crystallographic texture; multi-scale simulation; deformation mechanisms; strengthening; segregations; Grain Boundaries; radiation resistance; steels; Al alloys
Interests: severe plastic deformation; nanostructured and ultrafine-grained materials; X-ray analysis; crystallographic texture; multi-scale simulation; deformation mechanisms; strengthening; segregations; Grain Boundaries; radiation resistance; steels; Al alloys
Department of Material Engineering, Institute of Environmental Engineering, Faculty of Civil Engineering, Technical University of Kosice, Vysokoskolska 4, Kosice 042 00, Slovakia
Interests: durability; life cycle assessment (lca); biocorrosion; cement composites; environmental properties (leachability of metals, and radioactivity)
Interests: durability; life cycle assessment (lca); biocorrosion; cement composites; environmental properties (leachability of metals, and radioactivity)
Department of Civil & Environmental Engineering, University of Alaska Fairbanks, Fairbanks, AK, USA
Interests: rheology; modeling and simulation; recycling; mechanics of materials; statistics; fracture mechanics; mathematical modelling; construction materials; plasticity; microstructure; finite element analysis; waste materials; failure analysis; pavement engineering; chemo-mechanical analysis
Interests: rheology; modeling and simulation; recycling; mechanics of materials; statistics; fracture mechanics; mathematical modelling; construction materials; plasticity; microstructure; finite element analysis; waste materials; failure analysis; pavement engineering; chemo-mechanical analysis
Centre for Future Materials, University of Southern Queensland, Toowoomba, QLD 4350, Australia
Interests: carbon fibers; fiberglass; natural fibers; physical properties of fibers
Interests: carbon fibers; fiberglass; natural fibers; physical properties of fibers
Department of Civil, Chemical, Environmental, and Materials Engineering (DICAM), University of Bologna, Viale del Risorgimento 2, 40136 Bologna, Italy
Interests: structural mechanics; mechanical behavior at multiple length scales; materials characterization; non-destructive testing; concrete structures; use of waste materials in concrete; fiber-reinforced structures; masonry strengthening; computational mechanics; contact mechanics; damage and fracture initiation; crack propagation modeling; additive manufacturing of concrete and earth structures
Interests: structural mechanics; mechanical behavior at multiple length scales; materials characterization; non-destructive testing; concrete structures; use of waste materials in concrete; fiber-reinforced structures; masonry strengthening; computational mechanics; contact mechanics; damage and fracture initiation; crack propagation modeling; additive manufacturing of concrete and earth structures
Vasco da Gama CoLAB—Armazenamento de Energia, Porto, PT, Portugal
Interests: sensors; electrocatalysis; corrosion; electrochemistry; semiconductors; concrete structures; hybrid sol-gel materials; alkalis-silica reaction
Interests: sensors; electrocatalysis; corrosion; electrochemistry; semiconductors; concrete structures; hybrid sol-gel materials; alkalis-silica reaction
Department of Chemical Sciences, Università degli Studi di Catania, Via A. Doria 6, 95125 Catania, Italy
Interests: heterogeneous catalysis; photocatalysis; CO2 valorization; semiconductor photocatalysts; VOCs removal; h2 production and purification; co-prox reaction
Interests: heterogeneous catalysis; photocatalysis; CO2 valorization; semiconductor photocatalysts; VOCs removal; h2 production and purification; co-prox reaction
Department of Transport Infrastructure and Water Resources Engineering, Széchenyi István University, Győr, Hungary
Interests: geotechnical engineering; geometry; transportation; higher education; transportation planning; car; Civil Engineering; economic analysis; economics analysis; geotechnics
Interests: geotechnical engineering; geometry; transportation; higher education; transportation planning; car; Civil Engineering; economic analysis; economics analysis; geotechnics
Advanced Materials Processing and Analysis Center, University of Central Florida, Orlando, FL, USA
Interests: biomaterials; tissue engineering; stem cells; tumor microenvironment; regenerative medicine; cell-material interaction
Interests: biomaterials; tissue engineering; stem cells; tumor microenvironment; regenerative medicine; cell-material interaction
Dipartimento di Culture del Progetto (DCP)-Department of Architecture and Arts, Università Iuav di Venezia, Dorsodure, 2206 Venice, Italy
Interests: seismic engineering; structural engineering
Interests: seismic engineering; structural engineering
Faculty of Chemistry, Department of Polymer Technology, Gdańsk University of Technology, Gabriela Narutowicza 11/12, 80–233 Gdańsk, Poland
Interests: plastics and rubber recycling; reactive processing; composites; polymer blends and composites compatibilization; bitumen modification
Interests: plastics and rubber recycling; reactive processing; composites; polymer blends and composites compatibilization; bitumen modification
