Topical Advisory Panel
- Biomaterials Section
- Energy Materials Section
- Advanced Composites Section
- Advanced Materials Characterization Section
- Porous Materials Section
- Manufacturing Processes and Systems Section
- Advanced Nanomaterials and Nanotechnology Section
- Smart Materials Section
- Thin Films and Interfaces Section
- Catalytic Materials Section
- Carbon Materials Section
- Materials Chemistry Section
- Materials Physics Section
- Optical and Photonic Materials Section
- Corrosion Section
- Construction and Building Materials Section
- Materials Simulation and Design Section
- Electronic Materials Section
- Advanced and Functional Ceramics and Glasses Section
- Metals and Alloys Section
- Soft Matter Section
- Polymeric Materials Section
- Quantum Materials Section
- Mechanics of Materials Section
- Green Materials Section
Members
Department of Engineering, University of Rome “Niccolò Cusano”, 00166 Rome, Italy
Interests: life cycle analysis; innovative technologies; eco-friendly processes; environmental impact; costs evaluation; fluidized bed; additive manufacturing; laser manufacturing; 3D laser forming; composite protective coatings; surface finishing; electrodeposition process; metal foams.
Interests: life cycle analysis; innovative technologies; eco-friendly processes; environmental impact; costs evaluation; fluidized bed; additive manufacturing; laser manufacturing; 3D laser forming; composite protective coatings; surface finishing; electrodeposition process; metal foams.
Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
Interests: R&D of high strength maraging steels; functional laminated composites
Interests: R&D of high strength maraging steels; functional laminated composites
Department of Chemistry, Inter-Departmental Center Nanostructured Interfaces and Surfaces (NIS) and INSTM, University of Turin, Via Pietro Giuria 7, 10125 Torino, Italy
Interests: hydrogen storage; solid-state electrolyte; complex hydride; borohydride; metal hydride; Intermetallic; TiFe; reactive hydride composite; advanced characterization methods (in-situ XRD, neutron diffraction, calorimetry, Sievert method, SEM, etc); thermodynamic properties; thermodynamic modelling; computational thermodynamics; CALPHAD method
Interests: hydrogen storage; solid-state electrolyte; complex hydride; borohydride; metal hydride; Intermetallic; TiFe; reactive hydride composite; advanced characterization methods (in-situ XRD, neutron diffraction, calorimetry, Sievert method, SEM, etc); thermodynamic properties; thermodynamic modelling; computational thermodynamics; CALPHAD method
State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
Interests: welding; friction stir welding; dissimilar materials joining; friction stir formation; solid-state additive manufacturing; deformation driven metallurgy; joining mechanism
Special Issues, Collections and Topics in MDPI journals
Interests: welding; friction stir welding; dissimilar materials joining; friction stir formation; solid-state additive manufacturing; deformation driven metallurgy; joining mechanism
Special Issues, Collections and Topics in MDPI journals
Division of Chemistry and Biological Chemistry, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371, Singapore
Interests: biomaterials; metal–organic frameworks; nanozymes; cancer treatment; antibacteria
Special Issues, Collections and Topics in MDPI journals
Interests: biomaterials; metal–organic frameworks; nanozymes; cancer treatment; antibacteria
Special Issues, Collections and Topics in MDPI journals
Foundry Research Institute, 30-418 Kraków, Poland
Interests: aluminum alloys; intermetallic phases; microstructure description; microscope observations; in situ analysis (EDS, EBSD)
Special Issues, Collections and Topics in MDPI journals
Interests: aluminum alloys; intermetallic phases; microstructure description; microscope observations; in situ analysis (EDS, EBSD)
Special Issues, Collections and Topics in MDPI journals
Hydro-Québec’s Center of Excellence in Transportation Electrification and Energy Storage, Varennes, QC, Canada
Interests: SEM; EDS; EBSD; Monte Carlo; microanalysis; Li battery; material characterisation
Interests: SEM; EDS; EBSD; Monte Carlo; microanalysis; Li battery; material characterisation
Faculty of Infrastructure Engineering, Dalian University of Technology, Dalian 116024, China
Interests: structural modal parameter identification; rapid bridge detection and device development; data abnormality diagnosis and processing
Special Issues, Collections and Topics in MDPI journals
Interests: structural modal parameter identification; rapid bridge detection and device development; data abnormality diagnosis and processing
Special Issues, Collections and Topics in MDPI journals
Dr. Pu Wang
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
Interests: continuous casting; amorphous/nanocrystalline materials; numerical simulation; electromagnetic applications; atomization technology
Interests: continuous casting; amorphous/nanocrystalline materials; numerical simulation; electromagnetic applications; atomization technology
College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
Interests: metallic materials; composites; grain boundary; deformation behavior; twins; mechanical properties, severe plastic deformation
Special Issues, Collections and Topics in MDPI journals
Interests: metallic materials; composites; grain boundary; deformation behavior; twins; mechanical properties, severe plastic deformation
Special Issues, Collections and Topics in MDPI journals
Mechanics, Surfaces & Materials Processing Lab. - (MSMP), Arts et Métiers, Chalons en Champagne, France
Interests: tribology; wear; lubrication; surface metrology
Interests: tribology; wear; lubrication; surface metrology
School of Materials Science and Engineering, Shanghai JiaoTong University, Shanghai 200240, China
Interests: additive manufacturing; biomimetic 3D printed structures
Special Issues, Collections and Topics in MDPI journals
Interests: additive manufacturing; biomimetic 3D printed structures
Special Issues, Collections and Topics in MDPI journals
School of Life Sciences, Henan University, Kaifeng 475003, China
Interests: magnetic nanopariticle; up-conversion nanoparticle preparation; hyperbranched polymers; molecular mechanism of blood-brain barrier; mechanotransduction and vascular biology
Interests: magnetic nanopariticle; up-conversion nanoparticle preparation; hyperbranched polymers; molecular mechanism of blood-brain barrier; mechanotransduction and vascular biology
Tianjin Key Laboratory of Brine Chemical Engineering and Resource Eco-utilization, Key Laboratory of Marine Resource Chemistry and Food Technology (TUST) Ministry of Education of China, School of Chemical Engineering and Materials Science, Tianjin University of Science and Technology, Tianjin 300457, China
Interests: advanced functional material; separation and purification technology; optical biosensors and chemical sensors; molecularly imprinted polymers; covalent organic framework; metal-organic framework
Interests: advanced functional material; separation and purification technology; optical biosensors and chemical sensors; molecularly imprinted polymers; covalent organic framework; metal-organic framework
Department of Civil Engineering, Chonnam National University, Gwangju 61186, Korea
Interests: cement-based materials; photocatalyst applications; carbon-based composites; recycled construction materials; fibre-reinforced concrete; concrete fracture; computational mechanics; structural engineering
Special Issues, Collections and Topics in MDPI journals
Interests: cement-based materials; photocatalyst applications; carbon-based composites; recycled construction materials; fibre-reinforced concrete; concrete fracture; computational mechanics; structural engineering
Special Issues, Collections and Topics in MDPI journals
State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an 710049, China
Interests: solidificaiton; directional solidificaiton; single crystal blades; superalloys; additive manufacturing of superalloys and sands; joining of ceramics to metals; casting; lightweight casting
Interests: solidificaiton; directional solidificaiton; single crystal blades; superalloys; additive manufacturing of superalloys and sands; joining of ceramics to metals; casting; lightweight casting
Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, 19 Armii Krajowej Av., 42-200 Czestochowa, Poland
Interests: materials engineering; mechanical engineering; ferrous metals; non-ferrous metals; plastic working processes; steel; multiphase steels; AHSS steels; rolling process; drawing process; forging process; wires; tubes; plates; sheet; heat treatment process; welding process
Interests: materials engineering; mechanical engineering; ferrous metals; non-ferrous metals; plastic working processes; steel; multiphase steels; AHSS steels; rolling process; drawing process; forging process; wires; tubes; plates; sheet; heat treatment process; welding process
College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing, China
Interests: biomaterials; tissue engineering; electrospun fibers; scaffolds; stem cells; drug delivery; photothermal therapy
Special Issues, Collections and Topics in MDPI journals
Interests: biomaterials; tissue engineering; electrospun fibers; scaffolds; stem cells; drug delivery; photothermal therapy
Special Issues, Collections and Topics in MDPI journals
1. Beijing Advanced Innovation Center for Materials Genome Engineering, Department of Physical Chemistry, University of Science and Technology Beijing, Beijing 100083, China
2. School of Mathematics and Physics, University of Science and Technology Beijing, Beijing 100083, China
Interests: magnetoelectric materials; ferroelectric materials; thin films; transmission electron microscopy
2. School of Mathematics and Physics, University of Science and Technology Beijing, Beijing 100083, China
Interests: magnetoelectric materials; ferroelectric materials; thin films; transmission electron microscopy
School of Materials Science and Engineering, Harbin Institute of Technology at Weihai, Weihai 264209, China
Interests: materials science; metal forming; mechanical behavior of metallic materials; friction; layered materials; plastic deformation; micro-forming; size effects; flexible forming; formability; constitutive modeling; metallurgy; accumulative roll bonding
Interests: materials science; metal forming; mechanical behavior of metallic materials; friction; layered materials; plastic deformation; micro-forming; size effects; flexible forming; formability; constitutive modeling; metallurgy; accumulative roll bonding
Department of Materials and Mineral Resources Engineering, National Taipei University of Technology, Taipei 10608, Taiwan
Interests: powder metallurgy; sintering theory; additive manufacturing; metals and alloys; material analysis; mechanical property; fracture
Special Issues, Collections and Topics in MDPI journals
Interests: powder metallurgy; sintering theory; additive manufacturing; metals and alloys; material analysis; mechanical property; fracture
Special Issues, Collections and Topics in MDPI journals
School of Mechanical Engineering and Automation, Harbin Institute of Technology, Shenzhen, China
Interests: fabrication of functional structures and devices; microscale manufacturing and forming; micromilling; laser processing; microscale heat and mass transfer; microchannel heat sinks; heat pipes; cooling
Special Issues, Collections and Topics in MDPI journals
Interests: fabrication of functional structures and devices; microscale manufacturing and forming; micromilling; laser processing; microscale heat and mass transfer; microchannel heat sinks; heat pipes; cooling
Special Issues, Collections and Topics in MDPI journals
School of Mechanical and Mechatronic Engineering, University of Technology Sydney, Ultimo, NSW 2007, Australia
Interests: micro forming; numerical modeling of material processing; tribology in metal forming; advanced materials testing technology
Special Issues, Collections and Topics in MDPI journals
Interests: micro forming; numerical modeling of material processing; tribology in metal forming; advanced materials testing technology
Special Issues, Collections and Topics in MDPI journals
College of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China
Interests: hydrogel; double-network hydrogel; smart materials; biomedical materials; flexible sensor and tissue adhesive
Special Issues, Collections and Topics in MDPI journals
Interests: hydrogel; double-network hydrogel; smart materials; biomedical materials; flexible sensor and tissue adhesive
Special Issues, Collections and Topics in MDPI journals
Department of Mechanical and Energy Engineering, Southern University of Science and Technology (SUSTech), No. 1088, Xueyuan Road, Shenzhen 518055, Guangdong, China
Interests: atomic-scale manufacturing; ultraprecision polishing; plasma manufacturing; electrochemical manufacturing
Interests: atomic-scale manufacturing; ultraprecision polishing; plasma manufacturing; electrochemical manufacturing
Dr. Liwei Yang
Department of Biomedical Engineering, Stony Brook University, Stony Brook, NY 11794, USA
Interests: biomaterials; surface modification; biocompatible; single-cell analysis; microchip; microfluidics; nanotechnology; tissue engineering; regenerative medicine; hydrogel
Interests: biomaterials; surface modification; biocompatible; single-cell analysis; microchip; microfluidics; nanotechnology; tissue engineering; regenerative medicine; hydrogel
Department of Civil and Environmental Engineering, Technical University of Catalonia-BarcelonaTech, Building C1 Campus Nord, 08034 Barcelona, Spain
Interests: computational mechanics; thermo-mechanical processes; advanced manufacturing technologies; friction stir welding; additive manufacturing
Interests: computational mechanics; thermo-mechanical processes; advanced manufacturing technologies; friction stir welding; additive manufacturing
Department of Highway and Transportation Engineering, Faculty of Civil and Environmental Engineering, Gdansk University of Technology, 80-263 Gdansk, Poland
Interests: road engineering; pavement design; road materials; asphalt pavements; asphalt mixtures; effect of heavy loads on pavement structure; bituminous materials
Special Issues, Collections and Topics in MDPI journals
Interests: road engineering; pavement design; road materials; asphalt pavements; asphalt mixtures; effect of heavy loads on pavement structure; bituminous materials
Special Issues, Collections and Topics in MDPI journals
Multidisciplinary Research Center, Cardinal Stefan Wyszynski University in Warsaw, Warsaw, Poland
Interests: additive manufacturing; titanium alloys; chemical polishing; cellular structures; implants; bioengineering; AI/ML
Special Issues, Collections and Topics in MDPI journals
Interests: additive manufacturing; titanium alloys; chemical polishing; cellular structures; implants; bioengineering; AI/ML
Special Issues, Collections and Topics in MDPI journals
Key Laboratory of Ministry of Education for Solid Waste Treatment and Resource Recycle, Southwest University of Science and Technology, Mianyang 621010, China
Interests: mineral extracitve metallurgy
Interests: mineral extracitve metallurgy
