Search Results (7)

Polymerization-induced self-assembly (PISA) is a powerful and versatile technique for producing colloidal dispersions of block copolymer particles with desired morphologies. Currently, PISA can be carried out in various media, over a wide range of temperatures, and using different mechanisms. This method enables the production of biodegradable objects and particles with various functionalities and stimuli sensitivity. Consequently, PISA offers a broad spectrum of potential commercial applications. The aim of this review is to provide an overview of the current state of rational synthesis of block copolymer particles with diverse morphologies using various PISA techniques and mechanisms. The discussion begins with an examination of the main thermodynamic, kinetic, and structural aspects of block copolymer micellization, followed by an exploration of the key principles of PISA in the formation of gradient and block copolymers. The review also delves into the main mechanisms of PISA implementation and the principles governing particle morphology. Finally, the potential future developments in PISA are considered. Full article

Block copolymers (BCPs), through their self-assembly, provide an excellent guiding platform for precise controlled localization of maghemite nanoparticles (MNPs). Diblock copolymers (di/BCP) represent the most applied matrix to host filler components due to their morphological simplicity. A series of nanocomposites based on diblock copolymer or triblock terpolymer matrices and magnetic nanoparticles were prepared to study and compare the influence of an additional block into the BCP matrix. MNPs were grafted with low molecular weight polystyrene (PS) chains in order to be segregated in a specific phase of the matrix to induce selective localization. After the mixing of the BCPs with 10% w/v PS-g-MNPs, nanocomposite thin films were formed by spin coating. Solvent vapor annealing (SVA) enabled the PS-g-MNPs selective placement within the PS domains of the BCPs, as revealed by atomic force microscopy (AFM). The recorded images have proven that high amounts of functionalized MNPs can be controllably localized within the same block (PS), despite the architecture of the BCPs (AB vs. ABC). The adopted lamellar structure of the “neat” BCP thin films was maintained for MNPs loading approximately up to 10% w/v, while, for higher content, the BCP adopted lamellar morphology is partially disrupted, or even disappears for both AB and ABC architectures. Full article

Amphotericin B (AmB) is a broad spectrum of antifungal drug used to treat antifungal diseases. However, due to the high toxicity of AmB, treated patients may suffer the risk of side effects, such as renal failure. Nanoencapsulation strategies have been reported to elicit low toxicity, albeit most of them possess low encapsulation efficiency. The aim of this research is to develop micellar delivery systems for AmB with reduced toxicity while maintaining its affectivity by employing retinol (RET)-conjugated amphiphilic block copolymers (ABCs) as precursors. Copolymers composed of poly(ε-caprolactone) (A) and polyethylenglycol (B) of types AB and ABA were synthesized by ring opening polymerization and subsequently conjugated with RET by Steglich esterification. ¹H-NMR spectroscopy was used to corroborate the structure of copolymers and their conjugates and determine their molecular weights. Analysis by gel permeation chromatography also found that the materials have narrow distributions. The resulting copolymers were used as precursors for delivery systems of AmB, thus reducing its aggregation and consequently causing a low haemolytic effect. Upon conjugation with RET, the encapsulation capacity was enhanced from approximately 2 wt % for AB and ABA copolymers to 10 wt %. AmB encapsulated in polymer micelles presented improved antifungal efficiency against Candida albicans and Candida auris strains compared with Fungizone^®, as deduced from the low minimum inhibitory concentration. Full article

Using field-theoretic simulations based on a self-consistent field theory (SCFT) with or without finite compressibility, nanoscale mesophase formation in molten linear AB and ABC block copolymers is investigated in search of candidates for new and useful nanomaterials. At selected compositions and segregation strengths, the copolymers are shown to evolve into some new nanostructures with either unusual crystal symmetry or a peculiar morphology. There exists a holey layered morphology with Im3 symmetry, which lacks one mirror reflection compared with Im3m symmetry. Also, a peculiar cubic bicontinuous morphology, whose channels are connected with tetrapod units, is found to have Pn3m symmetry. It is shown that there is another network morphology with tripod connections, which reveals P432 symmetry. The optimized free energies of these new mesophases and their relative stability are discussed in comparison with those of double gyroids and double diamonds. Full article

The self-assembly of AB diblock copolymers in three-dimensional (3D) soft confinement of nanoemulsions has recently become an attractive bottom up route to prepare colloids with controlled inner morphologies. In that regard, ABC triblock terpolymers show a more complex morphological behavior and could thus give access to extensive libraries of multicompartment microparticles. However, knowledge about their self-assembly in confinement is very limited thus far. Here, we investigated the confinement assembly of polystyrene-block-poly(4-vinylpyridine)-block-poly(tert-butyl methacrylate) (PS-b-P4VP-b-PT or SVT) triblock terpolymers in nanoemulsion droplets. Depending on the block weight fractions, we found spherical microparticles with concentric lamella–sphere (ls) morphology, i.e., PS/PT lamella intercalated with P4VP spheres, or unusual conic microparticles with concentric lamella–cylinder (lc) morphology. We further described how these morphologies can be modified through supramolecular additives, such as hydrogen bond (HB) and halogen bond (XB) donors. We bound donors to the 4VP units and analyzed changes in the morphology depending on the binding strength and the length of the alkyl tail. The interaction with the weaker donors resulted in an increase in volume of the P4VP domains, which depends upon the molar fraction of the added donor. For donors with a high tendency of intermolecular packing, a visible change in the morphology was observed. This ultimately caused a shape change in the microparticle. Knowledge about how to control inner morphologies of multicompartment microparticles could lead to novel carbon supports for catalysis, nanoparticles with unprecedented topologies, and potentially, reversible shape changes by light actuation. Full article

This review is an attempt to update the recent advances in the self-assembly of amphiphilic block and graft copolymers. Their micellization behavior is highlighted for linear AB, ABC triblock terpolymers, and graft structures in non-aqueous selective polar and non-polar solvents, including solvent mixtures and ionic liquids. The micellar characteristics, such as particle size, aggregation number, and morphology, are examined as a function of the copolymers’ architecture and molecular characteristics. Full article

Amphiphilic block-copolymers are known to self-assemble into micelles and vesicles. In this paper, we discuss the multiple options between and beyond these boundaries using amphiphilic AB diblock and ABC triblock copolymers. We adjust the final structure reached by the composition of the mixture, by the preparation temperature, and by varying the time-scale of formation. This leads to the formation of vesicles and micelles, but also internal micelles in larger sheets, lamellar vesicles, and closed tubes, thus broadening the amount of self-assembly structures available and deepening our understanding of them. Full article