Search Results (16)

This study investigates the underlying mechanisms of hydrogen peroxide (H₂O₂) sensing using a composite material of bismuth oxide and bismuth oxyselenide (Bi₂O_xSe_y). The antagonistic effect of tungsten (W)-doping on the electrochemical behavior was also examined. Undoped, 2 mol%, 4 mol%, and 6 mol% W-doped Bi₂O_xSe_y nanostructures were synthesized using a one-pot solution phase method involving selenium powder and hydrazine hydrate. W-doping induced a morphological transformation from nanosheets to spherical nanoparticles and amorphization of the bismuth oxyselenide phase. Electrochemical sensing measurements were conducted using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). H₂O₂ detection was achieved over a wide concentration range of 0.02 to 410 µM. In-depth CV analysis revealed the complex interplay of oxidation-reduction processes within the bismuth oxide and Bi₂O₂Se components of the composite material. W-doping exhibited an antagonistic effect, significantly reducing sensitivity. Among the studied samples, undoped Bi₂O_xSe_γ demonstrated a high sensitivity of 83 μA μM⁻¹ cm⁻² for the CV oxidation peak at 0 V, while 6 mol% W-Bi₂O_xSe_y became completely insensitive to H₂O₂. Interestingly, DPV analysis showed a reversal of sensitivity trends with 2 and 4 mol% W-doping. The applicability of these samples for real-world analysis, including rainwater and urine, was also demonstrated. Full article

Strong coupling of quantum states with electromagnetic modes of topological matter offer an interesting platform for the exploration of new physics and applications. In this work, we report a novel hybrid mode, a surface topological plexciton, arising from strong coupling between the surface topological plasmon mode of a ${\mathrm{Bi}}_2{\mathrm{Se}}_3$ topological insulator nanoparticle and the exciton of a two-level quantum emitter. We study the power absorption spectrum of the system by working within the dipole and rotating-wave approximations, using a density matrix approach for the emitter, and a classical dielectric-function approach for the topological-insulator nanoparticle. We show that a Rabi-type splitting can appear in the spectrum suggesting the presence of strong coupling. Furthermore, we study the dependence of the splitting on the separation of the two nanoparticles as well as the dipole moment of the quantum emitter. These results can be useful for exploring exotic phases of matter, furthering research in topological insulator plasmonics, as well as for applications in the far-infrared and quantum computing. Full article

We study the spontaneous emission dynamics of a quantum emitter near a topological insulator Bi${}_2$Se${}_3$ spherical nanoparticle. Using the electromagnetic Green’s tensor method, we find exceptional Purcell factors of the quantum emitter up to ${10}^{10}$ at distances between the emitter and the nanoparticle as large as half the nanoparticle’s radius in the terahertz regime. We study the spontaneous emission evolution of a quantum emitter for various transition frequencies in the terahertz and various vacuum decay rates. For short vacuum decay times, we observe non-Markovian spontaneous emission dynamics, which correspond perfectly to values of well-established measures of non-Markovianity and possibly indicate considerable dynamical quantum speedup. The dynamics turn progressively Markovian as the vacuum decay times increase, while in this regime, the non-Markovianity measures are nullified, and the quantum speedup vanishes. For the shortest vacuum decay times, we find that the population remains trapped in the emitter, which indicates that a hybrid bound state between the quantum emitter and the continuum of electromagnetic modes as affected by the nanoparticle has been formed. This work demonstrates that a Bi${}_2$Se${}_3$ spherical nanoparticle can be a nanoscale platform for strong light–matter coupling. Full article

Metal chalcogenides are primarily used for thermoelectric applications due to their enormous potential to convert waste heat into valuable energy. Several studies focused on single or dual aliovalent doping techniques to enhance thermoelectric properties in semiconductor materials; however, these dopants enhance one property while deteriorating others due to the interdependency of these properties or may render the host material toxic. Therefore, a strategic doping approach is vital to harness the full potential of doping to improve the efficiency of thermoelectric generation while restoring the base material eco-friendly. Here, we report a well-designed counter-doped eco-friendly nanomaterial system (~70 nm) using both isovalent (cerium) and aliovalent (cobalt) in a Bi₂Se₃ system for enhancing energy conversion efficiency. Substituting cerium for bismuth simultaneously enhances the Seebeck coefficient and electrical conductivity via ionized impurity minimization. The boost in the average electronegativity offered by the self-doped transitional metal cobalt leads to an improvement in the degree of delocalization of the valence electrons. Hence, the new energy state around the Fermi energy serving as electron feed to the conduction band coherently improves the density of the state of conducting electrons. The resulting high power factor and low thermal conductivity contributed to the remarkable improvement in the figure of merit (zT = 0.55) at 473 K for an optimized doping concentration of 0.01 at. %. sample, and a significant nanoparticle size reduction from 400 nm to ~70 nm, making the highly performing materials in this study (${Bi}_{2-x}{Ce}_x{Co}_{\raisebox{1ex}{$2x$}\!\left/ \!\raisebox{-1ex}{$3$}\right.}{Se}_3$) an excellent thermoelectric generator. The results presented here are higher than several Bi₂Se₃-based materials already reported. Full article

Quantum dots (QDs) have attracted a lot of attention over the past decades due to their sharp emission spectrum and color, which can be tuned by changing just the particle size and chromophoric stability. All these advantages of QDs make quantum dot light-emitting diodes (QLEDs) promising candidates for display and light-source applications. This paper demonstrates a large-emitting-area QLED fabricated by a full-solution process. This QLED is composed of indium tin oxide (ITO) as the anode, poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT: PSS) as the hole injection layer (HIL), and poly(N,N′-bis-4-butylphenyl-N,N′-bisphenyl)benzidine (poly-TPD) as the hole-transport layer (HTL). The light-emitting layer (EML) is composed of green CdSe/ZnS quantum dots. By applying the ZnO nanoparticles as the electron-injection/transport layer, QLED devices are prepared under a full-solution process. The large-emitting-area QLED exhibits a low turn-on voltage of around 2~3 V, and the International Commission on Illumination (CIE) 1931 coordinate value of the emission spectrum was (0.31, 0.66). The large emitting area and the unique QLED structure of the device make it possible to apply these features to inkjet printing quantum dot light sources and quantum dot display applications. Full article

Materials with high optical constants are of paramount importance for efficient light manipulation in nanophotonics applications. Recent advances in materials science have revealed that van der Waals (vdW) materials have large optical responses owing to strong in-plane covalent bonding and weak out-of-plane vdW interactions. However, the optical constants of vdW materials depend on numerous factors, e.g., synthesis and transfer method. Here, we demonstrate that in a broad spectral range (290–3300 nm) the refractive index n and the extinction coefficient k of Bi₂Se₃ are almost independent of synthesis technology, with only a $~$10% difference in n and k between synthesis approaches, unlike other vdW materials, such as MoS₂, which has a $~$60% difference between synthesis approaches. As a practical demonstration, we showed, using the examples of biosensors and therapeutic nanoparticles, that this slight difference in optical constants results in reproducible efficiency in Bi₂Se₃-based photonic devices. Full article

Localized surface plasmon resonance (LSPR) is the cause of the photo-thermal effect observed in topological insulator (TI) bismuth selenide (Bi₂Se₃) nanoparticles. These plasmonic properties, which are thought to be caused by its particular topological surface state (TSS), make the material interesting for application in the field of medical diagnosis and therapy. However, to be applied, the nanoparticles have to be coated with a protective surface layer, which prevents agglomeration and dissolution in the physiological medium. In this work, we investigated the possibility of using silica as a biocompatible coating for Bi₂Se₃ nanoparticles, instead of the commonly used ethylene-glycol, which, as is presented in this work, is not biocompatible and alters/masks the optical properties of TI. We successfully prepared Bi₂Se₃ nanoparticles coated with different silica layer thicknesses. Such nanoparticles, except those with a thick, ≈200 nm silica layer, retained their optical properties. Compared to ethylene-glycol coated nanoparticles, these silica coated nanoparticles displayed an improved photo-thermal conversion, which increased with the increasing thickness of the silica layer. To reach the desired temperatures, a 10–100 times lower concentration of photo-thermal nanoparticles was needed. In vitro experiments on erythrocytes and HeLa cells showed that, unlike ethylene glycol coated nanoparticles, silica coated nanoparticles are biocompatible. Full article

Festuca arundinacea Schreb. is a widely used type of forage due to its great ecological breadth and adaptability. An agricultural intervention that improves the selenium content in cultivated plants has been defined as bio-fortification, a complementary strategy to improve human and non-human animals’ nutrition. The advancement of science has led to an increased number of studies based on nanotechnologies, such as the development of nanoparticles (NPs) and their application in crop plants. Studies show that NPs have different physicochemical properties compared to bulk materials. The objectives of this study were (1) to determine the behavior of F. arundinacea Schreb. plants cultivated with Se nanoparticles, (2) to identify the specific behavior of the agronomic and productive variables of the F. arundinacea Schreb. plants, and (3) to quantify the production and quality of the forage produced from the plant (the bioactive compounds’ concentrations, antioxidant activity, and the concentration of selenium). Three different treatments of SeNPs were established (0, 1.5, 3.0, and 4.5 mg/mL). The effects of a foliar fertilization with SeNPs on the morphological parameters such as the root size, plant height, and biomass production were recorded, as well as the effects on the physicochemical parameters such as the crude protein (CP), lipids (L), crude fiber (CF), neutral detergent fiber (NDF), acid detergent fiber (ADF), carbohydrates (CH), the content of total phenols, total flavonoids, tannins, quantification of selenium and antioxidant activity 2,2′-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and 2,2-diphenyl-1-picrylhydrazyl (DPPH). Significant differences (p < 0.05) were found between treatments in all the response variables. The best results were obtained with foliar application treatments with 3.0 and 4.5 mg/mL with respect to the root size (12.79 and 15.59 cm) and plant height (26.18 and 29.34 cm). The F. arundinacea Schreb. plants fertilized with 4.5 mg/L had selenium contents of 0.3215, 0.3191, and 0.3218 mg/Kg MS; total phenols of 249.56, 280.02, and 274 mg EAG/100 g DM; and total flavonoids of 63.56, 64.96, and 61.16 mg QE/100 g DM. The foliar biofortified treatment with a concentration of 4.5 mg/mL Se NPs had the highest antioxidant capacities (284.26, 278.35, and 289.96 mg/AAE/100 g). Full article

The study of the interaction of engineered nanoparticles, including quantum dots (QDs), with cellular constituents and the kinetics of their localization and transport, has provided new insights into their biological consequences in cancers and for the development of effective cancer therapies. The present study aims to elucidate the toxicity and intracellular transport kinetics of CdSe/ZnS and InP/ZnS QDs in late-stage ML-1 thyroid cancer using well-tested HeLa as a control. Our XTT (2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide) viability assay (Cell Proliferation Kit II) showed that ML-1 cells and non-cancerous mouse fibroblast cells exhibit no viability defect in response to these QDs, whereas HeLa cell viability decreases. These results suggest that HeLa cells are more sensitive to the QDs compared to ML-1 cells. To test the possibility that transporting rates of QDs are different between HeLa and ML-1 cells, we performed a QD subcellular localization assay by determining Pearson’s Coefficient values and found that HeLa cells showed faster QDs transporting towards the lysosome. Consistently, the ICP-OES test showed the uptake of CdSe/ZnS QDs in HeLa cells was significantly higher than in ML-1 cells. Together, we conclude that high levels of toxicity in HeLa are positively correlated with the traffic rate of QDs in the treated cells. Full article

In this paper, uniform Cu_2−xSe-modified Au/Bi₂Se₃ hybrid nanoparticles with porous shells have been prepared through a cation exchange method. Bi₂Se₃/Cu_2−xSe Z-scheme heterojunction is introduced onto Au nanocube by replacing Bi³⁺ with Cu²⁺. Owing to the effective coupling between Au core and semiconductor shells, Au/Bi₂Se₃/Cu_2−xSe hybrids present a broad and strong plasmon resonance absorption in the visible band. More intriguingly, the carrier lifetime of Au/Bi₂Se₃/Cu_2−xSe hybrid photoelectrodes can be further tailored with corresponding Cu_2−xSe content. Through parameter optimization, 0.1-Au/Bi₂Se₃/Cu_2−xSe electrode exhibits the longest electron lifetime (86.03 ms) among all the parallel samples, and corresponding photoelectrochemical performance enhancement is also observed in the tests. Compared with that of pure Bi₂Se₃ (0.016% at 0.90 V vs. RHE) and Au/Bi₂Se₃ (0.02% at 0.90 V vs. RHE) nanoparticles, the maximum photoconversion efficiency of porous Au/Bi₂Se₃/Cu_2−xSe hybrid photoanodes increased by 5.87 and 4.50 times under simulated sunlight illumination, attributing to the cooperation of Z-scheme heterojunction and plasmon resonance enhancement effects. All the results indicate that Au/Bi₂Se₃/Cu_2−xSe porous hybrids combine eco-friendliness with excellent sunlight harvesting capability and effectively inhibiting the charge recombination, which provide a new idea for efficient solar-driven water splitting. Full article

To develop highly efficient thermoelectric materials, the generation of homogeneous heterostructures in a matrix is considered to mitigate the interdependency of the thermoelectric compartments. In this study, Cu₂Te nanoparticles were introduced onto Bi₂Te_2.7Se_0.3 n-type materials and their thermoelectric properties were investigated in terms of the amount of Cu₂Te nanoparticles. A homogeneous dispersion of Cu₂Te nanoparticles was obtained up to 0.4 wt.% Cu₂Te, whereas the Cu₂Te nanoparticles tended to agglomerate with each other at greater than 0.6 wt.% Cu₂Te. The highest power factor was obtained under the optimal dispersion conditions (0.4 wt.% Cu₂Te incorporation), which was considered to originate from the potential barrier on the interface between Cu₂Te and Bi₂Te_2.7Se_0.3. The Cu₂Te incorporation also reduced the lattice thermal conductivity, and the dimensionless figure of merit ZT was increased to 0.75 at 374 K for 0.4 wt.% Cu₂Te incorporation compared with that of 0.65 at 425 K for pristine Bi₂Te_2.7Se_0.3. This approach could also be an effective means of controlling the temperature dependence of ZT, which could be modulated against target applications. Full article

The yield and morphology (length, width, thickness) of stoichiometric Bi₂Se₃ nanoribbons grown by physical vapor deposition is studied as a function of the diameters and areal number density of the Au catalyst nanoparticles of mean diameters 8–150 nm formed by dewetting Au layers of thicknesses 1.5–16 nm. The highest yield of the Bi₂Se₃ nanoribbons is reached when synthesized on dewetted 3 nm thick Au layer (mean diameter of Au nanoparticles ~10 nm) and exceeds the nanoribbon yield obtained in catalyst-free synthesis by almost 50 times. The mean lengths and thicknesses of the Bi₂Se₃ nanoribbons are directly proportional to the mean diameters of Au catalyst nanoparticles. In contrast, the mean widths of the Bi₂Se₃ nanoribbons do not show a direct correlation with the Au nanoparticle size as they depend on the contribution ratio of two main growth mechanisms—catalyst-free and vapor–liquid–solid deposition. The Bi₂Se₃ nanoribbon growth mechanisms in relation to the Au catalyst nanoparticle size and areal number density are discussed. Determined charge transport characteristics confirm the high quality of the synthesized Bi₂Se₃ nanoribbons, which, together with the high yield and tunable morphology, makes these suitable for application in a variety of nanoscale devices. Full article

Selenium nanoparticles (SeNPs) are successfully synthesized through microwave heating by using Theobroma cacao L. bean shell extract as a stabilizing and capping agent. Response surface methodology is used to obtain optimal synthesis conditions. The effect of microwave power, irradiation time and amount of Na₂SeO₃ are evaluated on crystalline size by X-ray Diffraction (XRD) and Z-potential by Dynamic Light Scattering (DLS) using a central composite design (CCD). Optimal synthesis conditions are determined as 15.6 min, 788.6 W and 0.14 g of sodium selenite using 50 mL of Theobroma cacao L. bean shell extract. The successful biosynthesis of SeNPs is confirmed by UV-visible and Fourier Transformed Infrared (FTIR) spectroscopic analyses. The XRD pattern and Raman spectra show the presence of trigonal and amorphous synthesized SeNPs. Spherical SeNPs are observed by Transmission Electron Microscopy (TEM) with a particle size of 1–3 nm in diameter, at least one order of magnitude lower than those previously reported. The obtained SeNPs can be stable up to 55 days at 4 °C. Additionally, the SeNPs show an excellent antioxidant performance by the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) and ferric reducing antioxidant power (FRAP) methods, with potential application in different sectors, such as food, medical and pharmaceutical. Full article

The effects of nanoparticles (NPs) on plants are contrasting; these depend on the model plant, the synthesis of the nanoparticles (concentration, size, shape), and the forms of application (foliar, substrate, seeds). For this reason, the objective of this study was to report the impact of different concentrations of selenium (Se) and copper (Cu) NPs on yield, antioxidant capacity, and quality of tomato fruit. The different concentrations of Se and Cu NPs were applied to the substrate every 15 days (five applications). The yield was determined until day 102 after the transplant. Non-enzymatic and enzymatic antioxidant compounds were determined in the leaves and fruits as well as the fruit quality at harvest. The results indicate that tomato yield was increased by up to 21% with 10 mg L⁻¹ of Se NPs. In leaves, Se and Cu NPs increased the content of chlorophyll, vitamin C, glutathione, 2,2′-azino-bis(3-ethylbenzthiazolin-6-sulfonic acid (ABTS), superoxide dismutase (SOD), glutathione peroxidase (GPX) and phenylalanine ammonia liasa (PAL). In fruits, they increased vitamin C, glutathione, flavonoids, firmness, total soluble solids, and titratable acidity. The combination of Se and Cu NPs at optimal concentrations could be a good alternative to improve tomato yield and quality, but more studies are needed to elucidate their effects more clearly. Full article

Photocatalysts are widely used for the elimination of organic contaminants from waste-water and H₂ evaluation by water-splitting. Herein, the nanohybrids of lanthanum (La) and selenium (Se) co-doped bismuth ferrites with graphene oxide were synthesized. A structural analysis from X-ray diffraction confirmed the transition of phases from rhombohedral to the distorted orthorhombic. Scanning electron microscopy (SEM) revealed that the graphene nano-sheets homogenously covered La–Se co-doped bismuth ferrites nanoparticles, particularly the (Bi_0.92La_0.08Fe_0.50Se_0.50O₃–graphene oxide) LBFSe50-G sample. Moreover, the band-gap nanohybrids of La–Se co-doped bismuth ferrites were estimated from diffuse reflectance spectra (DRS), which showed a variation from 1.84 to 2.09 eV, because the lowering of the band-gap can enhance photocatalytic degradation efficiency. Additionally, the photo-degradation efficiencies increased after the incorporation of graphene nano-sheets onto the La–Se co-doped bismuth ferrite. The maximum degradation efficiency of the LBFSe50-G sample was up to 80%, which may have been due to reduced band-gap and availability of enhanced surface area for incoming photons at the surface of the photocatalyst. Furthermore, photoluminescence spectra confirmed that the graphene oxide provided more electron-capturing sites, which decreased the recombination time of the photo-generated charge carriers. Thus, we can propose that the use of nanohybrids of La–Se co-doped bismuth ferrite with graphene oxide nano-sheets is a promising approach for both water-treatment and water-splitting, with better efficiencies of BiFeO₃. Full article