Search Results (22)

The Qieliekeqi siderite deposit, located in the Tashkurgan block of western Kunlun, is a carbonate-hosted iron deposit with hydrothermal sedimentary features. This study integrates whole-rock geochemistry, stable isotopes, and zircon U–Pb–Hf data to investigate its metallogenic evolution. Coarse-grained siderite samples, formed in deeper water, exhibit average Al₂O₃/TiO₂ ratios of 29.14, δEu of 2.69, and δCe of 0.83, indicating hydrothermal fluid dominance with limited seawater mixing. Banded samples from shallower settings show an average Al₂O₃/TiO₂ of 17.07, δEu of 3.18, and δCe of 0.94, suggesting stronger seawater interaction under oxidizing conditions. Both types are enriched in Mn, Co, and Ba, with low Ti and Al contents. Stable isotope results (δ¹³C_PDB = −6.0‰ to −4.6‰; δ¹⁸O_SMOW = 16.0‰ to 16.9‰) point to seawater-dominated fluids with minor magmatic and meteoric contributions, formed under open-system conditions at avg. temperatures of 53 to 58 °C. Zircon U–Pb dating yields an age of 211.01 ± 0.82 Ma, with an average εHf(t) of −3.94, indicating derivation from the partially melted ancient crust. These results support a two-stage model involving Late Cambrian hydrothermal sedimentation and Late Triassic magmatic overprinting. Full article

Unusual Ag-(Ni-Co-Sb-As-Hg ± Bi)-bearing fault-fill vein ore shoot mineralization set in a gangue of quartz, fluorite, and barite has been identified in Morocco’s Aouli deposit. The Paleozoic host rocks consist of a succession of Cambrian to Ordovician-aged folded and low- to medium-grade metasediments and metavolcaniclastic rocks with tuff interbeds and amphibolite sills, locally intruded by late Visean calc-alkaline to alkaline granitoid intrusions. Paragenetic relationships indicate that the sequence of ore precipitation comprises a succession of Ni-Co-Fe arsenides, followed by Pb-Sb-As-Ag-Hg sulfarsenides/sulfosalts and then Zn-Pb-Fe sulfides. Results indicate that the ore shoot mineralization formed from episodic stages of fracturing and subsequent fluid migration. Precipitation of ore phases is thought to have occurred as a result of isothermal mixing and subsequent fluid–rock interactions. The timing of mineralization is thought to have occurred between Late Triassic and Late Miocene, coinciding with major crustal extension and Middle Jurassic–Upper Cretaceous alkaline magmatism. Thermal convection and seismic pumping are proposed as the main driving force for the large-scale migration of the ore-forming brines. This research bears directly upon the potential for new exploration targets in Pb-Zn ± fluorite ± barite deposits hosted in Variscan inliers throughout North Africa. Full article

Exploration practice has proved that preservation conditions are one of the critical factors contributing to shale gas enrichment in the Middle Yangtze area. Well Yidi2 is the discovery well of Cambrian shale gas in this area. The paleo-fluid evolution and its implication for preservation conditions of shale gas remains unclear, posing challenges for shale gas exploration and development. In this study, through systematic analysis of fluid inclusions in fractrue-filling vein of the entire core section of this well, combined with carbon and oxygen isotope tests of veins and host rocks, a paleo-fluid profile was established to explore the formation environment of Cambrian paleo-fluids and their implications for the preservation conditions of the Shuijingtuo Formation (SJT Fm.) shale gas. The results suggest that fractures in the SJT Fm. shale at the base of Cambrian Series 2 mainly formed during the deep burial hydrocarbon generation stage, trapping a large number of liquid hydrocarbon inclusions. Subsequently, numerous high-density methane inclusions and a few of gas-liquid two-phase inclusions were trapped. The SO₄²⁻, Ca²⁺ and Mg²⁺ content of fluid inclusion groups in the veins decreased from the Qinjiamiao Formation (QJM Fm.) at the bottom of Cambrian Series 3 upward and downward respectively, and the rNa⁺/rCl⁻ ratio was the lowest in the SJT Fm. and increased overall upward. The δ¹³C values of calcite veins in Tianheban Formation (THB Fm.)-Shipai Formation (SP Fm.) of the middle Cambrian Series 2 and the Loushanguan Formation (LSG Fm.) of the Cambrian Series 3 were lighter compared to the host rocks. Results indicate the later tectonic activities in this area were relatively weak, and the shale interval remained in a state of high gas saturation for a long time. The QJM Fm. was the main source of high-salinity brine, and the SJT Fm. had strong self-sealing properties and was relatively less affected by external fluids. However, the pressure evolution of high-density methane inclusions in the SJT Fm. indicated that the pressure coefficient of the shale section significantly decreased during the Indosinian uplift and erosion stage. The veins in the THB-SP and LSG Fms. were closely related to the oxidation of hydrocarbon gases by TSR (thermochemical sulfate reduction) and the infiltration of atmospheric water, respectively. Therefore, the paleo-fluid in the fractures of Well Yidi2 have integrally recorded the whole geological process including the evolution from oil to gas, the backflow of high-salinity formation water, the upward escape of shale gas, and the process of shale gas reservoirs evolving from overpressure to normal pressure. Considering that Well Yidi2 area is located in a relatively stable tectonic setting, widely distributed fracture veins probably enhance the self-sealing ability, inhibiting the rapid escape of SJT Fm. shale gas. And the rapid deposition of Cretaceous also delayed the loss of shale gas to some extent. The combination of these two factors creates favorable preservation conditions of shale gas, establishing the SJT Fm. as the primary exploration target in this area. Full article

The La’erma and Qiongmo Au–Se deposits are characterized by a paragenetic Au–Se association hosted in the siliceous formation of the Cambrian Taiyangding Group in the western Qinling Orogen, central China. The La’erma and Qiongmo Au–Se deposits, which are considered to be the Carlin gold deposits, comprise a variety of selenides, native gold, and stibnite coexisting with baryte. Four stages have been recognized: sage I comprises pyrite and quartz with minor stibnite; stage II is composed mainly of sulfides; stage III is composed mainly of selenides; and stage IV is dominated by quartz–baryte–dickite. Stages II and III are the main metallogenic stages. Based on changes in mineral assemblages, combined with fluid inclusions and thermodynamic data, we evaluated the physicochemical conditions of the main metallogenic stages. The logfS₂ values of ore-forming fluids at stage II ranged between −10.44 and −14.60 with logfSe₂ being less than −10.70. Comparably, during stage III, which is characterized by numerous selenides, the logfS₂ and logfSe₂ ranged from −7.13 to −12.20 and −13.98 to −8.82, respectively. The occurrence of baryte during the mineralization suggests a consistently oxidizing condition, which can effectively remove Au from fluids. More importantly, this study emphasizes that the oxidizing condition was only a fundamental prerequisite for the deposition of selenides, and a high ∑Se/S ratio of the fluid ultimately controlled the precipitation of selenides. In the La’erma and Qiongmo deposits, intense water–rock reactions occurred as ore-forming fluids flowed into the Se-rich siliceous formations, resulting in an increase in the ∑Se/S ratio of the fluid and in the precipitation of selenides. Full article

The process of soil genesis unfolds as pioneering microbial communities colonize mineral substrates, enriching them with biomolecules released from bedrock. The resultant intricate surface units emerge from a complex interplay among microbiota and plant communities. Under these conditions, host rocks undergo initial weathering through microbial activity, rendering them far from pristine and challenging the quest for biomarkers in ancient sedimentary rocks. In addressing this challenge, a comprehensive analysis utilizing Gas Chromatography Mass Spectrometry (GC-MS) and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) was conducted on a 520-Ma-old Cambrian rock. This investigation revealed a diverse molecular assemblage with comprising alkanols, sterols, fatty acids, glycerolipids, wax esters, and nitrogen-bearing compounds. Notably, elevated levels of bacterial C₁₆, C₁₈ and C₁₄ fatty acids, iso and anteiso methyl-branched fatty acids, as well as fungal sterols, long-chained fatty acids, and alcohols, consistently align with a consortium of bacteria and fungi accessing complex organic matter within a soil-type ecosystem. The prominence of bacterial and fungal lipids alongside maturity indicators denotes derivation from heterotrophic activity rather than ancient preservation or marine sources. Moreover, the identification of long-chain (>C22) n-alkanols, even-carbon-numbered long chain (>C20) fatty acids, and campesterol, as well as stigmastanol, provides confirmation of plant residue inputs. Furthermore, findings highlight the ability of contemporary soil microbiota to inhabit rocky substrates actively, requiring strict contamination controls when evaluating ancient molecular biosignatures or extraterrestrial materials collected. Full article

We conduct an exploration-scale ambient noise tomography (ANT) survey over the Hillside Iron Oxide–Copper–Gold (IOCG) deposit in South Australia, leveraging Fleet’s direct-to-satellite technology for real-time data analysis. The acquisition array consisted of 100 sensors spaced 260 m apart which recorded continuous vertical-component seismic ambient noise for 14 days. High quality Rayleigh wave signals, with a mean signal-to-noise ratio (SNR) of 40, were recovered in the frequency band 1–4 Hz after processing the recorded data between 0.1–9 Hz. Our modelling results capture aspects of the deposit’s known geology, including depth of cover, structures linked to mineralisation, and the mineralised host rock, down to approximately 1 km depth. We compare our velocity model with existing magnetic, gravity, induced polarisation and drilling data, showing strong correlation with each. We identify several new features of the local geology, including the behaviour of key structures down to 1 km, and highlight the significance of a Cambrian-age dolomite that cuts across the main structural corridor that hosts the Hillside deposit. An analysis of model convergence rates with respect to Rayleigh wave SNRs shows that real-time data analysis can reduce recording duration at the site by 65% compared to traditional deployment durations, from ∼14 days to ∼5 days. Finally, we conclude by commenting on the efficacy of the ANT technique for the exploration of IOCG systems more broadly. Full article

Iron and iron–manganese deposits form three closely spaced clusters within the Lesser Khingan Range of the Russian Far East. Fe-Mn mineralization is hosted in Vendian–Cambrian carbonates and composed of magnetite, hematite, braunite, haussmanite, rhodochrosite and pyrolusite. The iron–manganese ores are closely associated with explosive intermediate–felsic breccias, magnetite-rich lavas, dolerites and mineralized lithocrystalloclastic tuffs. Magmatic rocks display both concordant and discordant relationships with Fe-Mn mineralization and contain abundant xenoliths of host carbonates. Both magmatic rocks (with the exception of Nb-enriched dolerites) and Fe-Mn ores are characterized by variable enrichments in large-ion lithophile and light rare earth elements and strong depletions in high-field strength elements compatible with the broad subduction setting for explosive volcanism and associated hydrothermal Fe-Mn ore mineralization. Nd-Sr isotope systematics suggest contamination by both ancient and juvenile continental crust and the involvement of recycled pelagic sediment in the formation of Fe-Mn deposits in the Lesser Khingan Range of the Russian Far East. Full article

The Ediacaran–Cambrian rocks on the northeastern edge of the Saghro inlier experienced polycyclic tectono-thermal events, which are reported here based on a multiscale structural analysis, from field measurements to fluid inclusion planes. Three striking populations were identified, cutting across both the Ediacaran and Cambrian formations. These tectonic structures were generated during four tectonic events. (i) E-W-striking structures that host ore mineralized bodies (sulfide, oxide, quartz, and barite). They display a polyphase tectonic history, caused by a dextral movement in response to a NW–SE-oriented shortening, leading to the formation of quartz gashes and veins. This tectonic event took place during the Neovariscan. These E–W-striking structures were subsequently reactivated during the Mesozoic time under a sinistral strike-slip regime as a result of NE–SW shortening syn-kinematic with barite mineralization. (ii) NE–SW-striking strike-slip structures (dextral or sinistral) crosscut the E–W-striking veins. These faults are related to the NW–SE-oriented shortening that occurred during the Neogene. (iii) The last tectonic episode, related to the N–S shortening, took place during the late Neogene to the Quaternary period. It resulted in NW–SE to N–S-striking structures that were related to dextral and sinistral strike-slip movements, which crosscut the preexisting E–W structures. Full article

To evaluate the effects of quartz precipitation on the abundance and preservation of organic matter pores in marine shale reservoirs, the type of authigenic quartz and the source of silica, as well as the corresponding relation of the Lower Cambrian Shuijingtuo Formation shale in South China were investigated. Quartz in the Shuijingtuo shale occurs as four different types: detrital quartz, replacement of biosiliceous debris, euhedral quartz filled in interparticle pores, and microquartz dispersed in a clay matrix. Euhedral quartz (1–5 μm) and matrix-dispersed microquartz (100–400 nm) are found to be the dominant forms of authigenic quartz. The euhedral quartz accumulates along the interparticle pores, and the porous organic matter fills the interior of the space. Microquartz is mainly wrapped in porous organic matter. Two silica sources were revealed: biogenic silica and clay-derived silica. Biogenic Si is most likely the major source for authigenic quartz in the organic-rich (total organic carbon (TOC) > 2.55 wt.%) samples, which accounts for 23–57 wt.% (average 35 wt.%) of the total Si. Based on petrographic observations, we posit that the precipitation of large-sized euhedral quartz in the interparticle pores most likely originated from biogenic silica in the early stage of diagenesis and that the silica for the clay matrix-dispersed microquartz is provided by biogenic silica and clay-derived silica. The observation of SEM images indicates that the precipitation of early diagenetic euhedral quartz in the interparticle pores enhances rock stiffness, and the buttressing effect can protect the organic matter pores from compaction during the late-stage burial diagenesis. In contrast, the precipitation of late diagenetic microquartz in the clay matrix can lead to a reduction in the capacity of the accommodation space to host retained petroleum, consequently leading to a reduction in the development of organic matter pores and the generation of shale gas. Full article

The Maliping large-scale Pb-Zn deposit is located in the Sichuan-Yunnan-Guizhou Pb-Zn polymetallic metallogenic triangle area (SYGT), where the Pb-Zn ore body is hosted in the interlayer fracture zone at the interface between siliceous cataclastic dolomite and clastic rocks in the Lower Cambrian Yuhucun Formation and is tectonically driven. Unlike other Pb-Zn deposits hosted in the Sinian and Carboniferous carbonate rocks in the area, the metallogenic mechanism and deep and peripheral ore prospecting prediction research require further exploration. In this study, representative samples of a typical orebody profile were systematically collected, and microthermometry of fluid inclusions and H-O isotopes and metal sulfide trace element analyses were performed. The main findings were as follows: (1) The fluid inclusion study showed that the ore-forming fluids have vapor-rich phase reduction characteristics of medium-low temperature, salinity, and density. (2) H-O isotopic studies showed that the ore-forming fluids are derived from the mixing of deep-source fluids flowing through the deep fold basement (Kunyang Group) and organic containing basin brine. (3) Rare earth element (REE) characteristics indicate that the ore-forming materials were primarily derived from the folded basement (Kunyang Group). (4) The trace element study showed that sphalerite is relatively enriched in Cu, Cd, Ga, and Ge, while depleted in Fe, Mn, Sn, and Co, similar to the typical Huize-type (HZT) Pb-Zn deposit in the area. Therefore, it is suitable to explore the deposit using a large-scale “four step style” ore prospecting method for ore prospecting and prediction. Moreover, the results provide a reference for the study of Pb-Zn metallogenic systems and new ideas for the deep and peripheral prospecting of Pb-Zn deposits in this area. Full article

The early Cambrian Takab iron ore deposit is situated in the northern part of the Sanandaj-Sirjan zone, western Iran. It consists of banded, nodular and disseminated magnetite hosted in folded micaschists. Trace element and Fe and O isotopic experiments reveal various hydrothermal precipitation environments under reduced to slightly oxidizing conditions. Disseminated magnetite has high Ti (945–1940 ppm) positively correlated with Mg + Al + Si, and heavy Fe (+0.76 to +1.86‰) and O (+1.0 to +4.07‰) isotopic compositions that support a magmatic/high-T hydrothermal origin. Banded magnetite has low Ti (15−200 ppm), V (≤100 ppm), Si and Mg (mostly ≤300 ppm) and variable Al. The ∂⁵⁶Fe values vary from −0.2‰ to +1.12‰ but most values also support a magmatic/high-T hydrothermal origin. However, variable ∂¹⁸O (−2.52 to +1.22‰) values provide evidence of re-equilibration with lower-T fluid at ~200–300 °C. Nodular magnetite shows high Mn (≤1%), and mostly negative ∂⁵⁶Fe values (average, −0.3‰) indicative of precipitation from an isotopically light hydrothermal fluid. Re-equilibration with carbonated rocks/fluids likely results in a negative Ce anomaly and higher ∂¹⁸O (average, +6.30‰). The Takab iron ore deposit has, thus, experienced a complex hydrothermal history. Full article

The Western Qinling orogenic belt (WQOB) is one of the most important prospective gold districts in China, with widely distributed Indosinian intermediate–acidic intrusions. The Liziyuan Au deposit is a representative orogenic deposit in the northern WQOB, hosting several sections spatially associated with igneous rocks. The Au deposit is hosted by meta-sedimentary volcanic rocks of the Cambrian–Ordovician Liziyuan Group and the Tianzishan monzogranite. Two periods, including five stages of mineralization, are recognized in this area: an early metamorphic mineralization period (PI), including quartz–pyrite (Stage I) and banded quartz–polymetallic sulfide (Stage II) veins, and a later magmatic mineralization period (PII) including quartz–K-feldspar–pyrite–molybdenite veins (Stage III), quartz–polymetallic sulfide–chlorite ± calcite veinlets and stockwork (Stage IV), and late calcite–quartz veinlets (Stage V). Geochronological studies indicate a SHRIMP zircon U-Pb age of 236.1 Ma for the Tianzishan monzogranite, and our published ages of ore-bearing diorite porphyrite of the Suishizi section and granite porphyry of the Jiancaowan section being 213 and 212 Ma, respectively. Pyrites formed in association with PI and PII mineralization have well-defined Rb–Sr ages of 220 ± 7.5, 205.8 ± 8.7, and 199 ± 15 Ma, with close temporospatial coupling between mineralization and magmatism. The δ¹⁸O and δD values of fluid inclusions in Stage IV auriferous quartz veins range from −0.03‰ to +5.24‰ and −93‰ to −75‰, respectively, suggesting that mineralizing fluid was likely of magmatic origin. Three distinct ranges of δ³⁴S values are identified in the studied sections (i.e., 7.04‰–9.12‰, −4.95‰ to −2.44‰, and 0.10‰–3.08‰), indicating a source containing multiple sulfur isotopes derived from magmatic and metamorphic fluids. The Liziyuan Au deposit is thus likely an orogenic deposit closely related to magmatism. Geochemical characteristics indicate that Tianzishan monzogranite is adakitic and was derived from thickened lower crust during Triassic orogenesis. The ore-bearing diorite porphyrite and granite porphyry formed in a post-collision extensional setting. Together with previous geological and geochemical data, our results indicate that the Liziyuan orogenic Au deposit was formed by early collisional–compressional metamorphism and late post-collision extensional magmatic fluids related to the evolution of the WQOB. Full article

The coexistence of numerous Mississippi Valley-type (MVT) Pb–Zn deposits and oil/gas reservoirs in the world suggests a close genetic relationship between mineralization and hydrocarbon accumulation. The Wusihe MVT Pb–Zn deposits are located along the southwestern margin of the Sichuan Basin. Based on the spatiotemporal relation between Pb–Zn deposits and paleo-oil/gas reservoirs, ore material sources, and processes of mineralization and hydrocarbon accumulation, a new genetic relationship between mineralization and hydrocarbon accumulation is suggested for these deposits. The Wusihe Pb–Zn deposits are hosted in the Ediacaran Dengying Formation dolostone, accompanied by a large amount of thermally cracked bitumen in the ore bodies. The Pb–Zn deposits and paleo-oil/gas reservoirs are distributed along the paleokarst interface; they overlap spatially, and the ore body occupies the upper part of the paleo-oil/gas reservoirs. Both the Pb–Zn ore and sphalerite are rich in thermally cracked bitumen, in which µm sized galena and sphalerite may be observed, and the contents of lead and zinc in the bitumen are higher than those required for Pb–Zn mineralization. The paleo-oil/gas reservoirs experienced paleo-oil reservoir formation, paleo-gas reservoir generation, and paleo-gas reservoir destruction. The generation time of the paleo-gas reservoirs is similar to the metallogenic time. The source rocks from the Cambrian Qiongzhusi Formation not only provided oil sources for paleo-oil reservoirs but also provided ore-forming metal elements for mineralization. Liquid oil with abundant ore-forming metals accumulated to form paleo-oil reservoirs with mature organic matter in source rocks. As paleo-oil reservoirs were buried, the oil underwent in situ thermal cracking to form overpressure paleo-gas reservoirs and a large amount of bitumen. Along with the thermal cracking of the oil, the metal elements decoupled from organic matter and H₂S formed by thermochemical sulfate reduction (TSR) and minor decomposition of the organic matter dissolved in oilfield brine to form the ore fluid. The large-scale Pb–Zn mineralization is mainly related to the destruction of the overpressured paleo-gas reservoir; the sudden pressure relief caused the ore fluid around the gas–water interface to migrate upward into the paleo-gas reservoirs and induced extensive metal sulfide precipitation in the ore fluid, resulting in special spatiotemporal associated or paragenetic relations of galena, sphalerite, and bitumen. Full article

In the course of attempting to date the host rocks of Viburnum metal deposits from the US state of Missouri, the purpose was here a detailed examination and contribution of the constitutive minerals of glauconite-rich pellets to the isotopic dating of these deposits. The glauconite pellets of Cambrian sediments hosting metal concentrates were dated here by the K-Ar method to complement earlier published Rb-Sr data. The study confirmed that the preparation and purification step of such glauconite pellets is especially critical with the need for a specific cleaning step to not only remove the detrital counterparts but also all Sr-rich components occurring as accessory minerals such as the carbonates, sulfates and oxides that apparently “contaminated” the Rb-Sr results. The K-Ar data and the previously released Rb-Sr results obtained on strictly the same glauconite-rich separates outline clear age discrepancies that can be summarized by higher, “older” K-Ar age data at about 440, 415 and 390 Ma, and lower, “younger” Rb-Sr data at about 400 and 370 Ma. The glauconite separates of most samples being apparently not contaminated by various detrital K-rich crystals, the two dating methods should have been affected similarly. The analytical dispersion seems, then, to result from a diagenetic event that affected the Rb-Sr system more than the K-Ar system by a plausible addition/subtraction of one or several Sr-rich and Rb-poor and, therefore, K-poor minerals. In turn, the studied pellets were apparently impregnated after deposition by flowing metal-rich fluids in a low-temperature environment not affected by a significant thermal impact. The Bonneterre Formation acted apparently as a regional drain for metal-rich fluids that percolated throughout the region at a probable burial depth of less than 2000 m. Full article

Geological mapping, stratigraphic observations, and U/Pb dating allow reconstructing the pre-orogenic setting of the transition zone between the distal European passive margin and the Alpine Tethys in the southwestern Alps. Although convergent tectonics overprinted the syn-rift Jurassic tectonic features, our data document an articulated Jurassic physiography. From the distal European passive margin oceanward, we distinguished: the Dronero Unit (the southernmost Dora Maira massif), represents a continental margin composite basement wherein monometamorphic metasediments are interlayered with Late Permian (253.8 ± 2.7 Ma) metavolcanic rocks; the Sampeyre Unit, represents a structural high consisting of Lower Triassic Verrucano-facies siliciclastic metasediments unconformably sealed by Cretaceous calcschist bearing Globotruncana sp.; the Maira Unit, corresponds to a Middle Triassic platform succession detached from the Sampeyre Unit; the Grana Unit, corresponds to a Late Triassic–Late Jurassic platform to basin succession; the Queyras Schistes Lustrès Complex, represents the ocean basin succession. Tectonic slices of Cambrian (513.9 ± 2.7 Ma) metadiorite hosted in the Valmala Shear Zone, separating the Dronero Unit from the underlying (U)HP units of the Dora Maira massif, suggests a potential pre-Alpine activation of the shear zone. Full article