Search Results (154)

Hydrogen peroxide (H₂O₂) application in several plant species has been widely studied as a plant biostimulant; however, the use of acoustic emissions related to hydric stress (MHAF) in biostimulating plants has not been widely studied, including the response of plants to the interaction of different stress factors. The aim of the present work was to evaluate the stress response in some morphological, biochemical, and molecular variables of the single or combined application of H₂O₂ and MHAF in C. annuum L. plants. Acoustic emission frequencies were obtained in a previous study where the frequencies came from C. annuum plants submitted to medium hydric stress (MHAF). Our results showed that the combination of the two stressors evaluated has a possible synergistic effect on variables such as SOD activity and relative gene expressions of ros1, met1, and MAPkinases (mkk5, mpk4-1, mpk6-2), as well as an antagonistic effect for flavonoid content, DPPH, and ABTS free radical inhibition, and def1 gene expression. MHAF showed increased plant height, PAL activity, and mpk6-1 and erf1 gene upregulation, while H₂O₂ increased POD activity and upregulated pr1a gene. These findings suggest possible stress response pathways that are activated and enhanced by the presence of these stress factors, both individually and in conjunction with one another, making it possible to use them as novel strategies for agricultural stress management. Full article

The most important bauxite deposits in Türkiye are located in the Seydişehir (Konya) and Akseki (Antalya) regions, situated along the western Taurus Mountain, with a total reserve of approximately 44 million tons. Some of the bauxite deposits have been exploited for alumina since the 1970s. In this study, bauxite samples, collected from six different deposits were examined to determine their mineralogical and chemical composition, as well as their REE content, with the aim of identifying which bauxite types are enriched in REEs and assessing their economic potential. The samples included massive, oolitic, and brecciated bauxite types, which were analyzed using optical microscopy, X-ray diffraction (XRD), X-ray fluorescence (XRF) and inductive coupled plasma-mass spectrometry (ICP-MS), field emission scanning electron microscopy (FESEM-EDX), and electron probe micro-analysis (EPMA). Massive bauxites were found to be more homogeneous in both mineralogical and chemical composition, predominantly composed of diaspore, boehmite, and rare gibbsite. Hematite is the most abundant iron oxide mineral in all bauxites, while goethite, rutile, and anatase occur in smaller quantities. Quartz, feldspar, kaolinite, dolomite, and pyrite were specifically determined in brecciated bauxites. Average oxide contents were determined as 52.94% Al₂O₃, 18.21% Fe₂O₃, 7.04% TiO₂, and 2.69% SiO₂. Na₂O, K₂O, and MgO values are typically below 0.5%, while CaO averages 3.54%. The total REE content of the bauxites ranged from 161 to 4072 ppm, with an average of 723 ppm. Oolitic-massive bauxites exhibit the highest REE enrichment. Cerium (Ce) was the most abundant REE, ranging from 87 to 453 ppm (avg. 218 ppm), followed by lanthanum (La), which reached up to 2561 ppm in some of the massive bauxite samples. LREEs such as La, Ce, Pr, and Nd were notably enriched compared to HREEs. The lack of a positive correlation between REEs and major element oxides, as well as with their occurrences in distinct association with Al- and Fe-oxides-hydroxides based on FESEM-EDS and EPMA analyses, suggests that the REEs are present as discrete mineral phases. Furthermore, these findings indicate that the REEs are not incorporated into the crystal structures of other minerals through isomorphic substitution or adsorption. Full article

This study investigates strategies for urban-scale renewable energy integration through a photovoltaic-centric approach, with a case study of a district in Barcelona. The methodology integrates spatial and morphological data using a geographic information system (GIS)-based and clustering framework to address challenges of CO₂ emissions, air pollution, and energy inefficiency. Rooftop availability and photovoltaic (PV) design constraints are analysed under current urban regulations. The spatial analysis incorporates building geometry and solar exposure, while an evolutionary optimisation algorithm in Grasshopper refines shading analysis, energy yield, and financial performance. Clustering methods (K-means and 3D proximity) group PV panels by solar irradiance uniformity and spatial coherence to enhance system efficiency. Eight PV deployment scenarios are evaluated, incorporating submodule integrated converter technology under a solar power purchase agreement model. Results show distinct trade-offs among PV scenarios. The standard fixed tilted (31.5° tilt, south-facing) scenario offers a top environmental and performance ratio (PR) = 66.81% but limited financial returns. In contrast, large- and huge-sized modules offer peak financial returns, aligning with private-sector priorities but with moderate energy efficiency. Medium- and large-size scenarios provide balanced outcomes, while a small module and its optimised rotated version scenarios maximise energy output yet suffer from high capital costs. A hybrid strategy combining standard fixed tilted with medium and large modules balances environmental and economic goals. The district’s morphology supports “solar neighbourhoods” and demonstrates how multi-scenario evaluation can guide resilient PV planning in Mediterranean cities. Full article

The spectroscopic properties of Pr³⁺ ions in the aluminosilicate matrix were investigated for the first time. Synthesis of CaAl₂SiO₆ (CASO) polycrystals doped with Pr³⁺ ions was carried out using the sol–gel method. The crystalline structures have been confirmed with XRD measurement. The absorption, excitation, emission spectra, and time decay profiles of the praseodymium (III) ions were measured and analyzed. It was found that upon excitation with visible light, this material exhibits emission mainly in the UVC region, via an upconversion emission process. The Stokes emission in the visible range is observed mainly from the ³P₀ and ¹D₂ energy levels. The ¹D₂→³H₄ emission is very stable even at very high temperatures. The studied aluminosilicate phosphors possess characteristics that confirm their potential in upconversion emission applications. Full article

The use of CH₄ and CO₂ as fuels in direct internal reforming solid oxide fuel cells (DIR-SOFCs) is a promising strategy for efficient power generation with reduced greenhouse gas emissions. In this study, Ni catalysts supported on Ce–Pr mixed oxides with varying Pr contents (0–80 mol%) were synthesized, calcined at 1200 °C, and tested for dry reforming of methane (DRM), aiming at their application as catalytic layers in SOFC anodes. Physicochemical characterization (XRD, TPR, TEM) showed that increasing Pr loading enhances catalyst reducibility and promotes the formation of the Pr₂NiO₄ phase, which contributes to the generation of smaller Ni⁰ particles after reduction. Catalytic tests revealed that all samples exhibited low-carbon deposition, attributed to the large Ni crystallites. The catalyst with 80 mol% Pr showed the best performance, achieving the highest CH₄ conversion (72%), a H₂/CO molar ratio of 0.89, and improved stability. These findings suggest that Ni/Ce_0.2Pr_0.8 could be a promising candidate for use as a catalyst layer of anodes in DIR-SOFC anodes. Although electrochemical data are not yet available, future work will evaluate the catalyst’s performance and durability under SOFC-relevant conditions. Full article

High-entropy ceramics have gained wider attention due to their structural integrity and stability, which can be used in various functional applications. Especially, high-entropy oxides exhibit excellent thermal stability, particularly at high temperatures. Thermal barrier coating materials must demonstrate good thermal stability without any phase transformation or phase separation, which is critical in aerospace and energy conversion applications. To address this, we have prepared new high-entropy stannate pyrochlore oxide nanoparticles with the composition (Gd_0.2Nd_0.2La_0.2Pr_0.2Sm_0.2)₂Sn₂O₇ through a simple glycine-assisted sol–gel synthesis. The phase evolution was probed at different heat-treatment temperatures from 1000 °C to 1500 °C. Among the temperatures investigated, a single-phase pyrochlore oxide was formed from 1300 °C without any impurity or phase separation. The obtained nanoparticles were characterized using various techniques, including X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), nanoindentation, and dilatometry to investigate their physiochemical and mechanical properties. The Vickers hardness of high-entropy oxides is 4.2 ± 0.33 GPa, while a thermal expansion coefficient (TEC) of 8.7 × 10⁻⁶ K⁻¹ at 900 °C is calculated. The results show that the prepared high-entropy pyrochlore oxide can be a suitable candidate for thermal barrier coating. Full article

Seaports, as major transportation hubs, generate significant air pollution due to intensive ship traffic, directly affecting local air quality. While emission inventories are commonly used to manage ship-based air pollution, they reflect only the emission-related aspect of a specified period and area, limiting the broader interpretability and comparability of the results. To overcome the mentioned challenges, this research presents the PrE-PARE model, which enables the prediction, analysis, and risk evaluation of ship-sourced air pollution in port areas. The model comprises three interconnected modules. The first is applied for quantifying emissions using detailed technical and movement datasets, which are combined into individual voyage trajectories to enable a high-resolution analysis of ship-based air pollutants. In the second module, the Multivariate Adaptive Regression Splines (MARS) machine learning method is adapted to predict emissions in varying operational scenarios. In the third module, novel metric methods are introduced, enabling a standardised efficiency comparison between ships. These methods are supported by a unique classification system to determine the emission risk in different periods, evaluate the intensity of various ship types, and rank individual ships based on their operational efficiency and emission optimisation potential. By combining new methods with technical and operational shipping data, the model provides a transparent, comparable, and adaptable system for emissions monitoring. The results demonstrate that the PrE-PARE model has the potential to improve strategic planning and air quality management in ports while remaining flexible enough to be applied in different contexts and future scenarios. Full article

Under China’s “dual-carbon” goal, it is necessary to coordinate the relationship between economic growth and emission reduction. Based on the panel data of 30 provinces in China from 2011 to 2021, this paper explores the coordination level among carbon cutting (CC), pollution reduction (PR), and economic growth (EG) by using the coupling coordination degree (CCD) model, a cold and hot spot analysis, and the Dagum Gini coefficient. Furthermore, we analyze the influencing factors of CCD from a spatial perspective using the geographically weighted regression (GWR) model. The results show that the coordination level of CC, PR, and EG in China has continued to improve and entered a moderately coordinated stage. Meanwhile, regional differences are also evident. The eastern region is a high-CCD concentration area, while the northwest and northeast regions are low-CCD concentration areas. However, inter-regional differences in CCD are decreasing. Urbanization, foreign direct investment, and new quality productive forces contribute significantly to achieving synergies among CC, PR, and EG. However, the effect of industry digitization on CCD fails the significance test in most provinces. The effects of the factors on CCD exhibit obvious spatial heterogeneity characteristics. These findings can provide an important basis for the formulation of regionally differentiated green and low-carbon development policies. Full article

Soil organic carbon (SOC) and total nitrogen (TN) sequestration are vital for maintaining soil fertility and mitigating climate change. This study aimed to evaluate the effects of different amendments (chemical and biological) and crop rotations on SOC, TN sequestration, and soil aggregate distribution. A six-year field study was conducted, involving five different treatments: a monoculture of peanut (PC), a monoculture of maize (MC), a maize-peanut rotation (M-PR), and peanut continuous cropping with chemical (PCCA) and biological (PCBA) amendments. Soil properties, aggregate size distribution, SOC, TN, and enzyme activities were measured. The results show that the bulk density increased, while the field water−holding capacity and porosity decreased with depth. M-PR had the highest macroaggregate (>0.25 mm) proportion, increasing by 21.6–50.8%. SOC and TN increased with aggregate size and were 23.9–103.6% and 7.0–82.9% higher, than PC and MC, respectively, under the treatments. PCCA showed the highest SOC, TN, and enzyme activities. Structural equation modeling indicated that the C and N contents of aggregates directly influenced SOC and TN sequestration. In conclusion, crop rotation and amendments, especially PCCA, effectively improve soil C and N sequestration, and enhance the soil structure, thereby reducing degradation risks, and potentially decreasing on−farm greenhouse gas emissions. Full article

Sr₂LaF₇:xPr³⁺ (x = 0.2, 1, 2, 3, 5, 10, and 25 mol%) nanophosphors with a cubic Fm3m structure were hydrothermally synthesized, forming nearly spherical nanoparticles with an average diameter of approximately 32 nm. Diffuse reflectance measurement and excitation spectra showed a primary excitation peak of Pr³⁺ at 443 nm, corresponding to the ground state to the ³P₂ level transition. Upon blue light excitation, Pr³⁺-activated Sr₂LaF₇ nanophosphors showed rich emission structure across the visible region of the spectrum, with blue (~483 nm), green (~525 nm), orange (~600 nm), and red (~640 nm) emissions, blue and orange being the most prominent ones. The relative intensities of these emissions varied with Pr³⁺ concentration, leading to tunable emission colors. The chromaticity showed slight variation with the Pr³⁺ content (0.350 < x < 0.417, 0.374 < y < 0.380), while the CCT value increased from 3118 K to 4901 K as the doping concentration increased. The optimized Sr₂LaF₇ with 2 mol% Pr³⁺ had the most intense emission with correlated color temperature (CCT) of 3628 K, corresponding to the warm white color. The proposed Pr³⁺-doping strategy offers valuable insights into discovering or optimizing single-phase phosphors for white-light-emitting applications. Full article

This paper presents the results of field tests conducted in the project “Implementation of TV White Spaces (TVWS) for Internet Access in Brazil”. This study evaluates the feasibility and regulatory implications of TVWS in rural and remote areas. TVWS systems are promising for sensor network applications, enabling efficient and long-range connectivity. The experiments assess the coexistence of TVWS signals, applying, for example, the Remote Area Access Network System for the Fifth Generation (5G-RANGE) using the generalized frequency division multiplexing (GFDM) technique, with the Integrated Services Digital Broadcasting–Terrestrial (ISDB-T) system. Laboratory tests determined the protection ratio (PR) between digital television (DTV) signals and interfering signals, with minimum PR values of $-31.38$ dB on channel n$-1$ and $-33.24$ dB on channel $n+1$ for 5G-RANGE using GFDM, highlighting its low out-of-band emission (OOBE). Field tests confirmed the laboratory results, with the worst recorded PR causing interference being $-30.2$ dB on channel $n-1$. The power restriction to 1 Wp limited coverage, allowing 96 Mbps in 24 MHz BW at 14.7 km from the base station. These results highlight that regulatory adjustments can be made to support TVWS deployment in Brazil. Full article

This paper addresses the upconversion of blue light to ultraviolet-C (UVC) with Pr³⁺-activated materials for antibacterial applications of UVC. It discusses the processes through which UV radiation provides biocidal effects on microorganisms, along with the most popular UVC sources employed in these processes. We describe the electronic and optical properties of the Pr³⁺ ion, emphasizing the conditions the host material must meet to obtain broad and intense emission in the UVC from parity-allowed transitions from the 4f5d levels and provide a list of materials that fulfill these conditions. This paper also delineates lanthanide-based upconversion, focusing on Pr³⁺ blue to UVC upconversion via the ³P₀ and ¹D₂ intermediate states, and suggests routes for improving the quantum efficiency of the process. We review literature related to the use of upconversion materials in antimicrobial photodynamic treatments and for the blue to UVC upconversion germicidal effects. Further, we propose the spectral overlap between the UVC emission of Pr³⁺ materials and the germicidal effectiveness curve as a criterion for assessing the potential of these materials in antimicrobial applications. Finally, this paper briefly assesses the toxicity of materials commonly used in the preparation of upconversion materials. Full article

With the escalating environmental issues, the imperatives to mitigate greenhouse gas emissions and advance energy products through innovation, energy production, and consumption frequently result in environmental externalities. Conventional markets frequently struggle to address these external factors, resulting in market failures. Consumers are more aware of the environmental repercussions, regulatory mandates, and potential economic benefits of new energy vehicles (NEVs). Consequently, there has been a substantial surge in the demand for NEVs as alternatives to conventional vehicles. This study analyses the method by which innovative technology moves from the stage of purchase intention dissemination toward market adoption and explores strategies to expedite this process. Moreover, it examines how the intentions of customers to purchase ecologically friendly energy goods and their receptiveness to such products affect the expansion of the market. Further analysis indicates that the factors influencing consumers’ attitudes towards NEVs include the adoption of ecological innovation, awareness of environmental product knowledge, and perceived value of innovative, environmentally friendly energy products. The purpose of this study is to expand upon the existing literature on consumer demand, examining the influential factors that extend the Theory of Planned Behaviour (TPB) to enhance consumer intention through internal mechanisms. It explicitly focuses on these aspects, as well as perceived risk (PR) and perceived value (PV), to identify gaps in the literature and contribute to intentions to purchase NEVs in China. This study presents a thorough research framework for efficiently examining customer demand for comparable eco-friendly energy products. It investigates the potential influence of attitudes, subjective norms, perceived behavioural control, and environmental perceptions, specifically those concerning environmental knowledge and concerns. Moreover, personal factors such as attitude, normative beliefs, and perceived control beliefs were found to impact consumer attitudes towards NEVs. The key factor influencing purchasing intention was the attitude towards NEVs. Simultaneously, subjective norms did not have a direct effect on purchase intentions. However, social influence played a significant role in the decision-making process, with perceived behavioural control and subjective norms exerting considerable influence. Full article

Ce-doped Lu₂Si₂O₇ has a high density, high luminescence efficiency even at high temperatures, and a high effective atomic number, making it a promising candidate for use as a radiation detector in medical devices and resource exploration equipment. In this study, we grow and characterize Pr³⁺ and Ce³⁺-doped Lu₂Si₂O₇ single crystals by systematically varying the Ce³⁺ to Pr³⁺ ratio to further improve scintillation properties. The optical characterization results show a bidirectional energy transfer: from the Pr³⁺ 5d levels to the Ce³⁺ 5d levels and from the Ce³⁺ 5d levels to the Pr³⁺ 4f levels. Consistently with this result, the PL decay time of emission from the Pr³⁺ 5d–4f transition tends to become faster as the Ce³⁺/Pr³⁺ ratio increases, due to the energy transfer from the Pr³⁺ 5d levels to the Ce³⁺ 5d levels. Additionally, (Ce_0.0022 Pr_0.0016 Lu_0.9962)₂Si₂O₇ exhibits a high light yield comparable to Ce-doped Lu₂Si₂O₇ and a slightly faster decay time than Ce-doped Lu₂Si₂O₇. Full article

Tailoring the bandgap of a material is necessary for improving its optical properties. Here, the optical bandgap of high-entropy oxide Ce_0.2Gd_0.2Sm_0.2Y_0.2Zr_0.2O_2-δ (HEO) nanoparticles was modified using Pr³⁺. Various concentrations of Pr³⁺ (x = 0, 0.01, 0.02, 0.05, 0.075, 0.1, 0.15) were incorporated into the host high-entropy oxide using a gel combustion synthesis. After the gel combustion step, the powders were heat-treated at various temperatures (650 °C, 800 °C, 950 °C) for 2 h. The obtained Pr³⁺-incorporated HEO powders were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and UV–visible spectroscopy. The results indicate that, when the samples are calcined at 950 °C, a single-phase cubic fluorite structure is obtained without any phase separation or impurity. The optical absorbance red-shifts to higher wavelengths when the concentration of Pr³⁺ is increased. This reduces the bandgap of the material from 3.15 eV to 1.87 eV for Pr³⁺ concentrations of x = 0 (HEO-0) and x = 0.15 (HEO-6), respectively. The obtained HEOs can be suitable candidates for photocatalytic applications due to their absorbance in the visible region. Full article