Search Results (2,797)

Promoting the green transformation of traditional diesel-powered ships is crucial for achieving carbon peaking and carbon neutrality goals. This study focuses on diesel-engine ships operating in the inland river areas of Anhui Province, China. It proposes two electrification retrofit schemes based mainly on lithium iron phosphate (LIP) batteries: full electrification and diesel-engine redundancy. The economic and environmental impacts of these schemes are analyzed and compared with those of conventional diesel-powered ships. A cost prediction algorithm based on model prediction is proposed, supported by a mathematical model for cost analysis. Results indicate that for electric tankers to become economically viable, battery costs must decrease through yearly improvements in energy density and reduced degradation rates. Additionally, government support is essential, such as raising carbon prices and providing subsidies—either an annual operational subsidy of CNY 80,000 or an initial construction subsidy of CNY 500,000. The study concludes that continued advances in battery technology, together with policy and financial support, will accelerate the large-scale electrification of ships. Full article

This study investigates the corrosion performance of reinforced steel in concrete subjected to carbonation and chloride ingress. Four systems were examined: normal concrete (NC15), chloride-exposed (ClC15), carbonated (COC15), and chloride-exposed carbonated concrete (COClC15). A comprehensive assessment was carried out using electrochemical testing, gravimetric weight loss, chloride profiling, Temkin adsorption isotherm modeling, and SEM analysis. Electrochemical results showed a marked increase in corrosion activity under combined chloride–carbonation exposure. The highest corrosion current density (i_corr) was obtained in COClC15 (0.4779 µA/cm²), compared with only 0.0106 µA/cm² for NC15. Gravimetric analysis confirmed these findings, with COClC15 exhibiting a corrosion rate nearly 1.5 times greater than ClC15 and 52 times higher than NC15 after 120 days. Chloride profiling revealed reduced binding efficiency in carbonated concrete; at 5 mm depth, COClC15 bound only 0.06% chloride, while ClC15 retained 0.43%. The Temkin adsorption isotherm further quantified the weakened binding capacity. The binding coefficient (β) of COClC15 was considerably lower than ClC15 and NC15, reflecting the impact of C–S–H decalcification and aluminate phase transformation into carboaluminates, which restrict Friedel’s salt formation. SEM micrographs corroborated these observations, showing extensive microstructural degradation in COClC15. This study revealed that the synergy of carbonation and chloride ingress reduces chloride-binding capacity, accelerates depassivation, and severely compromises the durability of reinforced concrete in aggressive environments. Full article

Mainlobe interference can severely degrade the performance of distributed phased-array radar systems in the presence of strong jamming or low-reflectivity targets. This paper introduces a signal–data dual-domain cooperative antijamming and localization (SDCAL) framework that integrates adaptive complete ensemble empirical mode decomposition with improved blind source separation and wavelet optimization (CEEMDAN-WOBSS) for signal-level denoising and separation. Following source separation, CFAR-based pulse compression is applied for precise range estimation, and multi-node data fusion is then used to achieve three-dimensional target localization. Under low signal-to-noise ratio (SNR) conditions, the adaptive CEEMDAN–WOBSS approach reconstructs the signal covariance matrix to preserve subspace rank, thereby accelerating convergence of the separation matrix. The subsequent pulse compression and CFAR detection steps provide reliable inter-node distance measurements for accurate fusion. The simulation results demonstrate that, compared to conventional blind-source-separation methods, the proposed framework markedly enhances interference suppression, detection probability, and localization accuracy—validating its effectiveness for robust collaborative sensing in challenging jamming scenarios. Full article

To address the synergistic degradation mechanisms in engineering service environments, we propose a boron microalloying strategy to enhance the multifunctional surface performance of AlCoCrFeNiMo-based high-entropy alloys. AlCoCrFeNiMoTiBx coatings (x = 0, 0.5, 1, and 1.5) were fabricated on Q235 steel substrates using laser cladding. The microstructure of the coatings was characterized using scanning electron microscope (SEM) and energy dispersive spectrometer (EDS), while their wear and corrosion resistance were evaluated through tribological and electrochemical tests. The key findings indicate that boron addition preserves the original body-centered cubic (BCC) and σ phases in the coating while promoting the in situ formation of TiB₂, leading to lattice distortion. With increasing B content, the BCC phase becomes refined, and both the fraction and size of TiB₂ particles increase. Boron incorporation improves the coating’s microhardness and wear resistance, with the highest wear resistance achieved at x = 1, where abrasive and oxidative wear predominate. At lower content (x = 0.5), B enhances the stability of the passive film and thereby improves corrosion resistance. In contrast, excessive formation of large TiB₂ particles introduces defects into the passive film, accelerating its degradation. Full article

Biologically treated swine farm wastewater still contains high levels of refractory organics, humic substances and antibiotic residues, posing environmental risks and limiting opportunities for water reuse. Wastewater treatment by ozonation alone suffers from low mass transfer efficiency and selective oxidation. To overcome these limitations, a catalytic ozonation process (O₃/Fe²⁺/H₂O₂) was applied and optimized using Response Surface Methodology (RSM) based on single-factor experiments and Central Composite Design (CCD) for advanced swine farm wastewater treatment. The optimal conditions ([O₃] = 25.0 mg/L, [Fe²⁺] = 25.9 mg/L, [H₂O₂] = 41.1 mg/L) achieved a COD removal of 44.3%, which was 86.8% higher than that of ozonation alone, and increased TOC removal to 29.5%, indicating effective mineralization. Biodegradability (BOD₅/COD) of swine farm wastewater effluent increased from 0.01 to 0.34 after the catalytic ozonation treatment. Humic-like and fulvic-like substances were removed by 93.7% and 95.4%, respectively, and antibiotic degradation was significantly accelerated and enhanced. The synergistic process improved ozone utilization efficiency by 33.1% and removed 53.95% of total phosphorus through Fe³⁺-mediated coprecipitation. These findings demonstrate that with catalytic ozone decomposition and production of hydroxyl radicals, the O₃/Fe²⁺/H₂O₂ system effectively integrates enhanced ozone utilization efficiency, radical synergy, and simultaneous pollutant removal, providing a cost-effective and technically feasible strategy for advanced swine farm wastewater treatment and safe reuse. Full article

This study investigates the air filtration capabilities of fibrous membranes fabricated via electrospinning, with a focus on optimizing processing parameters. Specifically, Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a well-characterized biodegradable polyester, was electrospun to produce membranes exhibiting precisely controlled surface microstructures. The optimal fiber morphology was attained under conditions of a 20 kV applied electric field, a solution flow rate of 0.5 mL·h⁻¹, a polymer concentration of 13 wt.%, and a needle inner diameter of 0.21 mm. The microstructural features of the electrospun PHBV membranes were characterized using scanning electron microscopy (SEM). Complementary analysis via ¹³C nuclear magnetic resonance (NMR) spectroscopy confirmed that the membranes comprised pure 3-hydroxyvalerate (3HV) copolymerized with 3-hydroxybutyrate (3HB) terminal units, with 3HV mole fractions ranging from 17% to 50%. The incorporation of different molar percentages of 3HV in PHBV membrane significantly enhances its durability, as evidenced by Ball Burst Strength (BBS) measurements, with an elongation at burst that is 65–86% greater than that of ASTM F2100 level 3 mask. The nanofibrous membranes exhibited a controlled pore size distribution, indicating their potential suitability for air filtration applications. Particle filtration efficiency (PFE) assessments under standard atmospheric pressure conditions showed that the optimized electrospun PHBV membranes achieved filtration efficiencies exceeding 98%. Additionally, the influence of 3HV content on biodegradation behavior was evaluated through soil burial tests conducted over 90 days. Results indicated that membranes with lower 3HV content (17 mol.%) experienced the greatest weight loss, suggesting accelerated degradation in natural soil environments. Full article

The outburst of Zonag Lake in the permafrost region of the Qinghai-Tibet Plateau (QTP) has significantly altered the local environment, particularly affecting surface conditions and permafrost dynamics. By employing remote sensing and GIS tools, this study analyzed the spatial and temporal variations in surface environmental changes (surface temperature, vegetation, and dryness) within the Zonag–Salt Lake basin. The results indicate that the outburst caused higher surface temperatures and reduced vegetation cover around Zonag Lake. Analysis using the Temperature–Vegetation Dryness Index (TVDI) reveals higher dryness levels in downstream areas, especially from Kusai Lake to Salt Lake, compared to the upstream Zonag Lake. Temporal trends from 2000 to 2023 show a decrease in average Land Surface Temperature (LST) and an increase in the Normalized Difference Vegetation Index (NDVI). Geographical centroid shifts in environmental indices demonstrate migration patterns influenced by seasonal climate changes and the outburst event. Desertification around Zonag Lake accelerates permafrost development, while the wetting environment around Salt Lake promotes permafrost degradation. The Zonag Lake region is also an ecologically significant area, serving as a key calving ground for the Tibetan antelope (Pantholops hodgsonii), a nationally protected species. Thus, the environmental changes revealed in this study carry important implications for biodiversity conservation on the Tibetan Plateau. These findings highlight the profound impact of the Zonag Lake outburst on the surface environment and permafrost dynamics in the region, providing critical insights for understanding environmental responses to lake outbursts in high-altitude regions. Full article

Yangjiatang Village traces its origins to the late Ming and early Qing dynasties. It has evolved over more than 400 years of history. There are 78 rammed-earth buildings left, making it one of the most complete and largest rammed-earth building complexes in East China. This study investigated the traditional rammed-earth houses in Yangjiatang Village, Songyang County, Zhejiang Province. By combining field investigation, microscopic characterization, and experimental simulation, we systematically revealed the erosion resistance of rammed earth in a subtropical humid climate was systematically revealed. Using a combination of advanced techniques including drone aerial photography, X-ray diffraction (XRD), microbial community analysis, scanning electron microscopy (SEM), and soil leaching simulations, we systematically revealed the anti-erosion mechanisms of rammed-earth surfaces in Yangjiatang Village. The study found that (1) rammed-earth walls are primarily composed of Quartz, Mullite, lepidocrocite, and Nontronite, with quartz and lepidocrocite being the dominant minerals across all orientations. (2) Regulating the community structure of specific functional microorganisms enhanced the erosion resistance of rammed-earth buildings. (3) The surface degradation of rammed-earth walls is mainly caused by four factors: structural cracks, surface erosion, biological erosion and roof damage. These factors work together to cause surface cracking and peeling (depth up to 3–5 cm). (4) This study indicates that the microbial communities in rammed-earth building walls show significant differences in various orientations. Microorganisms play a dual role in the preservation and deterioration of rammed-earth buildings: they can slow down weathering by forming protective biofilms or accelerating erosion through acid production. Full article

Harmonic drive is susceptible to strength failure and performance degradation failure during operation. Given the long life test cycles, limited sample size, and incomplete understanding of degradation laws, this study conducted comprehensive life test and performance degradation test research to enable future failure prediction and reliability assessment for harmonic drive. Building upon established test rigs for a HD life test and performance degradation test, a step-down accelerated life test methodology was developed. Life tests under step-down accelerated conditions were executed, with a concurrent performance degradation test throughout the life test. Key datasets acquired include vibration signal histories, degradation data for critical performance indicators such as stiffness, precision, transmission efficiency, and backlash. Test results show that the predominant strength failure in the atmospheric environment is flexspline fatigue fracture, while significant degradation occurred in stiffness, precision, and backlash across all test conditions; transmission efficiency showed gradual degradation before strength failure followed by a marked decline post-failure. Finally, the failure mechanism of strength and performance degradation is analyzed, and the mechanism consistency of the two failures is verified by Hilbert envelope spectrum analysis and degradation trajectory shape consistency, respectively. The results from this paper provide critical data support and a reference foundation for the proactive maintenance of the harmonic drive. Full article

The long-distance high-voltage transmission tower-line system, frequently traversing active fault zones, is vulnerable to severe symmetry-breaking damage during earthquakes due to asymmetric permanent ground displacements. However, the seismic performance of such systems, particularly concerning symmetry-breaking effects caused by asymmetric fault displacements, remains inadequately studied. This study investigates the symmetry degradation mechanisms in a 1:40 scaled 500 kV tower-line system subjected to cross-fault ground motions via shaking table tests. The testing protocol incorporates representative fault mechanisms—strike-slip and normal/reverse faults—to systematically evaluate their differential impacts on symmetry response. Measurements of acceleration, strain, and displacement reveal that while acceleration responses are spectrally controlled, structural damage is highly fault-type dependent and markedly asymmetric. The acceleration of towers without permanent displacement was 35–50% lower than that of towers with permanent displacement. Under identical permanent displacement conditions, peak displacements caused by normal/reverse motions exceeded those from strike-slip motions by 50–100%. Accordingly, a fault-type-specific amplification factor of 1.5 is proposed for the design of towers in dip-slip fault zones. These results offer novel experimental insights into symmetry violation under fault ruptures, including fault-specific correction factors and asymmetry-resistant design strategies. However, the conclusions are subject to limitations such as scale effects and the exclusion of vertical ground motion components. Full article

Accelerated artificial aging of zinc oxide (ZnO)-based acrylic artists’ paint, filled with calcium carbonate (CaCO₃) as an extender, was carried out for a total of 1963 h (~8 × 10⁷ lux·h), with assessments at specific intervals. The total color difference ΔE* was <2 (CIELab-76 system) over 1725 h of aging, while the human eye notices color change at ΔE* > 2. Oxidative degradation of organic components in the paint to form volatile products was revealed by attenuated total reflectance–Fourier transform infrared (ATR-FTIR) spectroscopy, micro-Raman spectroscopy, and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS). It appears that deep oxidation of organic intermediates and volatilization of organic matter may be responsible for the relatively small value of ΔE* color difference during aging of the samples. To elucidate the degradation pathways, principal component analysis (PCA) was applied to the spectral data, revealing: (1) the catalytic role of ZnO in accelerating photodegradation, (2) the Kolbe photoreaction, (3) the decomposition of the binder to form volatile degradation products, and (4) the relative photoinactivity of CaCO₃ compared with ZnO, showing slower degradation in areas with a higher CaCO₃ content compared with those dominated by ZnO. These results provide fundamental insights into formulation-specific degradation processes, offering practical guidance for the development of more durable artist paints and conservation strategies for acrylic artworks. Full article

Background: Ultraviolet B (UVB) radiation accelerates skin aging by inducing oxidative stress, collagen degradation, and cellular senescence. Although Petasites japonicus is known for its antioxidant properties, its anti-photoaging potential remains underexplored. This research explored the protective properties of a hot water extract from P. japonicus leaves (KP-1) against photoaging caused by UVB exposure. Methods: Hairless mice were exposed to UVB three times per week and orally administered KP-1 for 13 weeks. Wrinkle formation, epidermal thickness, skin hydration, and collagen content were assessed. Protein expression related to MAPK/AP-1, TGF-β/Smad2/3, and p53/p21 pathways was analyzed by Western blotting. Results: KP-1 significantly reduced UVB-induced wrinkle area, epidermal and dermal thickening, and transepidermal water loss while restoring collagen density and skin hydration. KP-1 inhibited MMP-1 expression, enhanced COL1A1 levels, suppressed MAPK/AP-1 activation, and activated TGF-β/Smad2/3 signaling. It also balanced p53/p21 expression and restored cyclin D1 and CDK4 levels, thereby preventing UVB-induced senescence. Conclusions: The findings of this research revealed that KP-1 can serve as a promising natural substance for safeguarding the skin from damage and aging caused by UVB exposure. Full article

Artificial intelligence-based image processing is critical for sensor fusion and image transformation in mobility systems. Advanced driver assistance functions such as forward monitoring and digital side mirrors are essential for driving safety. Degradation due to raindrops, fog, and high-dynamic range (HDR) imbalance caused by lighting changes impairs visibility and reduces object recognition and distance estimation accuracy. This paper proposes a diffusion framework to enhance visibility under multi-degradation conditions. The denoising diffusion probabilistic model (DDPM) offers more stable training and high-resolution restoration than the generative adversarial networks. The DDPM relies on large-scale paired datasets, which are difficult to obtain in raindrop scenarios. This framework applies the Palette diffusion model, comprising data augmentation and raindrop-removal modules. The data augmentation module generates raindrop image masks and learns inpainting-based raindrop synthesis. Synthetic masks simulate raindrop patterns and HDR imbalance scenarios. The raindrop-removal module reconfigures the Palette architecture for image-to-image translation, incorporating the augmented synthetic dataset for raindrop removal learning. Loss functions and normalization strategies improve restoration stability and removal performance. During inference, the framework operates with a single conditional input, and an efficient sampling strategy is introduced to significantly accelerate the process. In post-processing, tone adjustment and chroma compensation enhance visual consistency. The proposed method preserves fine structural details and outperforms existing approaches in visual quality, improving the robustness of vision systems under adverse conditions. Full article

Accelerating urbanisation and industrial activity have led to the widespread release of polycyclic aromatic hydrocarbons (PAHs), a class of persistent organic pollutants with serious ecological and health consequences. While physical and chemical remediation techniques are widely used, they often require nonrenewable resources and generate secondary waste. Fungal-based bioremediation offers a promising alternative, leveraging the unique metabolic pathways and structural properties of fungi to break down or adsorb PAHs. This review focuses on three strategies of PAH remediation in aquatic environments: biofiltration, biosorption, and metabolic degradation. We conduct a comparison between conventional systems and fungal approaches with reference to the literature (2000–2025). Fungal matrices are identified as being able to capture and adsorb PAHs, facilitating localised remediation that capitalises on the biological capabilities of fungal organisms while requiring lower resource inputs than conventional methods. This review highlights fungal matrices as multifunctional water filtration membranes and provides insights for the application and development of engineered living materials (ELMs) for the water detoxification of PAHs. Full article

Dye-contaminated wastewater has become one of the most severe environmental challenges due to the non-biodegradability and toxicity of synthetic dyes. While photocatalytic degradation is considered a green and efficient technology for wastewater purification, conventional TiO₂ suffers from limited light utilization and rapid electron–hole recombination. In this exploration, Ag-TiO₂-RGO nanocomposites were successfully fabricated and systematically investigated by XRD, SEM, TEM, XPS, Raman, and PL spectroscopy. The incorporation of Ag nanoparticles and reduced graphene oxide (RGO) synergistically improved charge separation and transfer efficiency. Photocatalytic activity was evaluated using different dyes as pollutants under visible light irradiation. Among the samples, Ag-TiO₂-RGO-3% exhibited the highest RhB degradation efficiency of 99.5% within 75 min, with a rate constant (K) of 0.05420 min⁻¹, which was nearly three times higher than that of pure TiO₂. The photocatalyst also showed excellent reusability with only minor efficiency loss after five cycles, and its activity remained stable across a wide pH range. Radical trapping experiments revealed that •O₂⁻ served as the dominant reactive species, with additional contributions from •OH and photogenerated holes (h⁺). A possible photocatalytic mechanism was proposed, in which Ag nanoparticles and RGO effectively suppressed electron–hole recombination and accelerated the formation of reactive oxygen species for efficient dye mineralization. These findings demonstrate that Ag-TiO₂-RGO-3% is a promising photocatalyst with high activity, stability, and environmental adaptability for wastewater remediation. Full article