Search Results (515)

Bio-based nanofibers are gaining increasing attention in nanotechnology owing to their high surface area, interconnected porosity, and capacity to incorporate bioactive compounds. Among natural polymers, gelatin is particularly attractive because of its abundance, low cost, biodegradability, and versatile physicochemical properties. When processed by electrospinning, gelatin combines its amphiphilic nature with the structural advantages of nanofibers, enabling efficient interactions with a wide range of molecules. Nevertheless, pure gelatin nanofibers have drawbacks, such as poor mechanical strength and high-water solubility. To address these limitations, strategies including polymer blending, chemical and physical crosslinking, and multilayer biomaterials have been developed, resulting in improved stability, functionality, and application-specific performance. Therefore, this review summarizes recent advances in the fabrication and functionalization of gelatin nanofibers, highlighting how processing parameters and gelatin source influence electrospinning outcomes and fiber properties. Key applications are also discussed, with emphasis on biomedical, food, environmental, and biosensing. Therefore, gelatin nanofibers represent a sustainable and versatile biomaterial with high potential for advanced technological applications. Full article

Background: Skin injuries, such as chronic wounds and inflammatory skin diseases, often face limitations in treatment efficacy due to the low efficiency of transdermal drug delivery and insufficient local concentrations. Curcumin (CUR), a natural compound with anti-inflammatory and antioxidant properties, has demonstrated potential in the repair of skin damage; however, its clinical application is hindered by its physicochemical characteristics. This study constructs a novel nanocomposite drug delivery system: CUR-loaded micellar nanocomposite gel (CUR-M-DMNs-Gel). A composite system is used to achieve the efficient solubilization and enhanced transdermal permeation of CUR, thereby providing a novel formulation approach for the treatment of skin diseases. Methods: CUR-loaded micellar (CUR-M) utilizes CUR as the core active ingredient, which possesses multiple pharmacological effects including anti-inflammatory and antioxidant properties. TPGS serves as a micellar carrier that not only enhances the solubility and stability of CUR through its amphiphilic structure but also facilitates drug absorption and transport within the body. In dissolvable microneedles (DMNs), PVP K30 forms a stable three-dimensional network structure through entanglement of polymer chains, ensuring sufficient mechanical strength for effective penetration of the skin barrier. Meanwhile, PVP K90, with its higher molecular weight, enhances the backing’s support and toughness to prevent needle breakage during application. The incorporation of hyaluronic acid (HA) improves both the moisture retention and adhesion properties at the needle tips, ensuring gradual dissolution and release of loaded CUR-M within the skin. In CUR-loaded micellar gel (CUR-M-Gel), PVP K30 increases both adhesive and cohesive forces in the gel through chain entanglement and hydrogen-bonding interactions. Tartaric acid precisely regulates pH levels to adjust crosslinking density; glycerol provides a long-lasting moisturizing environment for the gel; aluminum chloride enhances mechanical stability and controlled drug-release capabilities; NP-700 optimizes dispersion characteristics and compatibility within the system. Results: In vitro experiments demonstrated that the CUR-M-DMNs-Gel composite system exhibited enhanced transdermal penetration, with a cumulative transdermal efficiency significantly surpassing that of single-component formulations. In the mouse skin defect model, CUR-M-DMNs-Gel facilitated collagen deposition and effectively inhibited the expression of inflammatory cytokines (TNF-α, IL-6, and IL-1β). In the mouse skin photoaging model, CUR-M-DMNs-Gel markedly reduced dermal thickness, alleviated damage to elastic fibers, and suppressed inflammatory responses. Conclusions: The CUR-M-DMNs-Gel system can enhance wound healing through subcutaneous localization, achieving long-term sustained efficacy. This innovative approach offers new insights into the treatment of skin injuries. Full article

The development of hydrophilic biodegradable polymers is crucial for a range of biomedical applications, including targeted drug delivery and prosthetics. Ring-opening polymerization of substituted ε-caprolactone monomers provides an efficient method for the synthesis of polyesters with tailored properties. In this work, a synthetic approach for the preparation of ester- and morpholinoamido-disubstituted ε-caprolactone monomers was developed. Poorly defined polymers were obtained from the monomers, bearing two ester groups due to the competitive transesterification of the pendant substituents. On the other hand, the disubstituted morpholinoamido-ε-caprolactone was polymerized in a controlled manner by ring-opening polymerization, and amorphous homopolymers with a high glass transition temperature (112 °C) and good solubility in water were obtained. Statistical and block copolymers with the unsubstituted ε-caprolactone were also prepared, and DLS analysis of the amphiphilic block copolymers in water shows the presence of self-assembled particles. These results demonstrate the potential of morpholinoamido-functionalized ε-caprolactone derivatives as building blocks for the development of biodegradable polymeric materials for biomedical applications. Full article

This study examined a novel ethoxy-segment-regulated hydrophobic associative amphiphilic copolymer, P(AA-AAEO_n), and systematically evaluated its solution self-assembly behavior and enhanced oil recovery (EOR) performance. The influence of ethylene oxide (EO) chain length and polymer concentration on particle size distribution and aggregation morphology was analyzed using dynamic light scattering (DLS). The results revealed a concentration-dependent transition from intramolecular to intermolecular association, accompanied by a characteristic decrease followed by an increase in hydrodynamic diameter. At a fixed AA:AAEO_n molar ratio (400:1), increasing EO segment length increased aggregate size and improved colloidal stability. Viscometric analysis showed that longer EO chains markedly increased molecular chain flexibility and solution viscosity. Interfacial tension measurements demonstrated superior interfacial activity of P(AA-AAEO_n) compared to polyacrylic acid (PAA), and longer EO chains further reduced oil–water interfacial tension. Emulsification tests verified its strong ability to emulsify crude oil. Sandpack flooding experiments and micromodel studies demonstrated effective conformance control and high displacement efficiency, achieving up to 30.65% incremental oil recovery. These findings offered essential insights for designing hydrophobic associative polymers with tunable interfacial properties for EOR applications. Full article

Epoxy asphalt is a superior polymer-modified asphalt material; however, significant differences in physicochemical properties, such as solubility parameters and dielectric constants, between epoxy resin and asphalt have led to compatibility issues that hinder its development. This study employed molecular dynamics simulations to investigate the effect of maleic anhydride-grafted styrene-butadiene-styrene (MAH-g-SBS) on the compatibility of epoxy asphalt. By analyzing parameters such as cohesive energy density, solubility parameters, energy distribution, interaction energy, radial distribution function, free volume fraction, and mean square displacement, the molecular mechanism underlying the enhanced compatibility was elucidated. The results indicate that the amphiphilic molecular structure of MAH-g-SBS significantly improves the thermodynamic compatibility between asphalt and epoxy resin, enhances interfacial affinity and stability, reduces the system’s total interaction and nonbonded energies, facilitates the dispersion and permeation of epoxy molecules into asphalt, and increases molecular mobility, thereby comprehensively enhancing the compatibility of the epoxy asphalt blend. Segregation tests and fluorescence microscopy further verified the simulation results, demonstrating that MAH-g-SBS improves the storage stability and phase uniformity of the epoxy asphalt system. Full article

Molecular-mimetic nanocolloids (MMNCs) are promising for advanced materials, yet self-assembly fabrication faces challenges in purity and programmability. We report a total synthesis strategy for surfactant-mimetic nanocolloids (SMNCs), an amphiphilic MMNC subclass. SMNCs consist of a ~5 nm silica nanoparticle head and a bottlebrush polymer tail. Regioselective silica deposition on linear-block-brush polymers via the modified sol–gel method enables precise control. This strategy is versatile and can be adapted to synthesize other MMNCs with different components. It offers a more controlled alternative to self-assembly methods, advancing MMNC synthesis and enabling their broader use in emerging technologies. Full article

Against the backdrop of global energy transition and strict environmental regulations, supercritical carbon dioxide (scCO₂) fracturing and oil displacement technologies have emerged as pivotal green approaches in shale gas exploitation, offering the dual advantages of zero water consumption and carbon sequestration. However, the inherent low viscosity of scCO₂ severely restricts its sand-carrying capacity, fracture propagation efficiency, and oil recovery rate, necessitating the urgent development of high-performance thickeners. The current research on scCO₂ thickeners faces a critical trade-off: traditional fluorinated polymers exhibit excellent philicity CO₂, but suffer from high costs and environmental hazards, while non-fluorinated systems often struggle to balance solubility and thickening performance. The development of new thickeners primarily involves two directions. On one hand, efforts focus on modifying non-fluorinated polymers, driven by environmental protection needs—traditional fluorinated thickeners may cause environmental pollution, and improving non-fluorinated polymers can maintain good thickening performance while reducing environmental impacts. On the other hand, there is a commitment to developing non-noble metal-catalyzed siloxane modification and synthesis processes, aiming to enhance the technical and economic feasibility of scCO₂ thickeners. Compared with noble metal catalysts like platinum, non-noble metal catalysts can reduce production costs, making the synthesis process more economically viable for large-scale industrial applications. These studies are crucial for promoting the practical application of scCO₂ technology in unconventional oil and gas development, including improving fracturing efficiency and oil displacement efficiency, and providing new technical support for the sustainable development of the energy industry. This study innovatively designed an amphiphilic modified amino silicone oil polymer (MA-co-MPEGA-AS) by combining maleic anhydride (MA), methoxy polyethylene glycol acrylate (MPEGA), and amino silicone oil (AS) through a molecular bridge strategy. The synthesis process involved three key steps: radical polymerization of MA and MPEGA, amidation with AS, and in situ network formation. Fourier transform infrared spectroscopy (FT-IR) confirmed the successful introduction of ether-based CO₂-philic groups. Rheological tests conducted under scCO₂ conditions demonstrated a 114-fold increase in viscosity for MA-co-MPEGA-AS. Mechanistic studies revealed that the ether oxygen atoms (Lewis base) in MPEGA formed dipole–quadrupole interactions with CO₂ (Lewis acid), enhancing solubility by 47%. Simultaneously, the self-assembly of siloxane chains into a three-dimensional network suppressed interlayer sliding in scCO₂ and maintained over 90% viscosity retention at 80 °C. This fluorine-free design eliminates the need for platinum-based catalysts and reduces production costs compared to fluorinated polymers. The hierarchical interactions (coordination bonds and hydrogen bonds) within the system provide a novel synthetic paradigm for scCO₂ thickeners. This research lays the foundation for green CO₂-based energy extraction technologies. Full article

Because of their potential “smart” applications, multifunctional stimuli-responsive polymers are gaining increasing scientific interest. The present work explores the possibility of developing such materials based on the hydrolytically stable N-3-dimethylamino propyl methacrylamide), DMAPMA. To this end, the properties in aqueous solution of the homopolymer PDMAPMA and copolymers P(DMAPMA-co-MMA_x) of DMAPMA with the hydrophobic monomer methyl methacrylate, MMA, were explored. Two copolymers were prepared with a molar content x = 20% and 35%, as determined by Proton Nuclear Magnetic Resonance (¹H NMR). Turbidimetry studies revealed that, in contrast to the homopolymer exhibiting a lower critical solution temperature (LCST) behavior only at pH 14 in the absence of salt, the LCST of the copolymers covers a wider pH range (pH > 8.5) and can be tuned within the whole temperature range studied (from room temperature up to ~70 °C) through the use of salt. The copolymers self-assemble in water above a critical aggregation Concentration (CAC), as determined by Nile Red probing, and form nanostructures with a size of ~15 nm (for P(DMAPMA-co-MMA₃₅)), as revealed by transmission electron microscopy (TEM) and dynamic light scattering (DLS). The combination of turbidimetry with ¹H NMR and automatic total organic carbon/total nitrogen (TOC/TN) results revealed the potential of the copolymers as visual CO₂ sensors. Finally, the alkylation of the copolymers with dodecyl groups lead to cationic amphiphilic materials with an order of magnitude lower CAC (as compared to the unmodified precursor), effectively stabilized in water as larger aggregates (~200 nm) over a wide temperature range, due to their increased ζ potential (+15 mV). Such alkylated products show promising biocidal properties against microorganisms such as Escherichia coli and Staphylococcus aureus. Full article

In order to improve oil recovery efficiency in low-permeability reservoirs, this study developed amphiphilic Janus-SiO₂ nanoparticles to prepare polymer gel microspheres for enhanced oil recovery (EOR). Firstly, Janus-SiO₂ nanoparticles were synthesized via surface modification using (3-aminopropyl)triethoxysilane and α-bromoisobutyryl bromide. Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) characterization confirmed the successful grafting of amino and styrene chains, with the particle size increasing from 23.8 nm to 32.9 nm while maintaining good dispersion stability. The Janus nanoparticles exhibited high interfacial activity, reducing the oil–water interfacial tension to 0.095 mN/m and converting the rock surface wettability from oil-wet (15.4°) to strongly water-wet (120.6°), thereby significantly enhancing the oil stripping efficiency. Then, polymer gel microspheres were prepared by reversed-phase emulsion polymerization using Janus-SiO₂ nanoparticles as emulsifiers. When the concentration range of nanoparticles was 0.1–0.5 wt%, the particle size range of polymer gel microspheres was 316.4–562.7 nm. Polymer gel microspheres prepared with a high concentration of Janus-SiO₂ nanoparticles can ensure the moderate swelling capacity of the particles under high-temperature and high-salinity conditions. At the same time, it can also improve the mechanical strength and shear resistance of the microspheres. Core displacement experiments confirmed the dual synergistic effect of this system. Polymer gel microspheres can effectively plug high-permeability zones and improve sweep volume, while Janus-SiO₂ nanoparticles enhance oil displacement efficiency. Ultimately, this system achieved an incremental oil recovery of 19.72%, exceeding that of conventional polymer microsphere systems by more than 5.96%. The proposed method provides a promising strategy for improving oil recovery in low-permeability heterogeneous reservoir development. Full article

Background/Objectives: In this study, we present a green, scalable platform for the production of water-dispersible powders co-encapsulating the lipophilic bioactives curcumin (Cur) and eugenol (Eug) within the amphiphilic polymer Soluplus^® (SP) via low-temperature spray drying. Methods: The amount of Cur (1%, 5%, and 10%) and Eug (5%, 10%, 15%, and 20%) was varied to achieve single- and double-loaded water-soluble powders with the maximum amount of active substances. The powders containing a higher loading of Cur, 5% and 10% (and Eug), were obtained from water/ethanol mixtures (2:1 and 5:1 v/v ratio), while the formulation with 1% of Cur was spray-dried by using water as a solvent. Results: By leveraging aqueous or aqueous–ethanolic feed systems, we achieved high loading of the bioactive substances—up to 10% Cur and 20% Eug (w/w)—while minimizing organic solvent use. Myo-inositol was incorporated as a stabilizing excipient to modulate particle morphology, improve powder flowability, and enhance redispersibility. Physicochemical characterization revealed nanoscale micellization (53–127 nm), amorphization of both actives as confirmed by XRD and DSC, and the absence of crystalline residue. Encapsulation efficiencies exceeded 95% for Cur and 93% for Eug. Dissolution tests demonstrated a rapid release from the 5% Cur/5% Eug formulation (>85% in 5 min), while higher-loaded single-formulations showed progressively slower release (up to 45 min). Conclusions: This work demonstrates a robust and environmentally responsible encapsulation strategy, suitable for delivering poorly water-soluble phytochemicals with potential applications in oral nutraceuticals and pharmaceutical dosage forms. Full article

Objectives: Nanosized polymeric micelles (PMs) with an average size of about 80 nm and moderately positive ζ potential, based on an amphiphilic poly(4-methyl-piperazin-1-yl)-propenone)-b-polylactide (PMPP-PLA) block copolymer, were prepared. They were used as platforms for the delivery of bioactive sesquiterpene lactones from Inula helenium L. root extract. Methods: The PMs were characterized with good encapsulation efficiency as a maximum value of 72% was reached at a polymer-to-extract mass ratio of 10:1. The loaded micelles exhibited good colloidal stability. An in vitro release was performed showing a burst release profile. The biocompatibility of the resulting PMs was confirmed by assessing their cytotoxic effect on human keratinocytes in vitro by colorimetric assay and flow cytometry. Results: The systems demonstrated the capability to reduce the biomass of pre-formed Gram-positive and Gram-negative bacterial biofilms. Conclusions: The obtained data clearly determine a trend for a strong combined effect between the PMs and the root extract, distinguishing them with an excellent anti-biofilm potential and prospects for future applications in medical practice. Full article

Helical ladder polymers attract attention because of their well-defined, one-handed helical ladder structures and unique properties, which differ from precursor polymers that have random-coil conformations. However, the synthesis of helical ladder polymers is difficult and inhibits their functions and applications. In this study, we reported the synthesis of amphiphilic optically active 2,2′-tethered binaphthyl-embedded helical ladder polymers carrying hydrophilic oligo (ethylene glycol) (OEG) as side chains through quantitative and chemoselective acid-promoted intramolecular cyclization of random-coil precursor polymers. The obtained helical ladder polymers exhibited dramatic circular dichroism (CD) and circularly polarized luminescence (CPL) enhancement. Moreover, we further established a circularly polarized fluorescence-energy transfer (CPF-ET) strategy in which the helical ladder polymers work as a donor, emitting circularly polarized fluorescence to excite an achiral fluorophore (coumarin-6) as the acceptor, producing green CPL with luminescence dissymmetry factor (2.5 × 10⁻⁴). Full article

Background/Objectives: This research focuses on the development and optimization of polymer–lipid hybrid nanoparticles (PLHNs) using two grades of mPEG-PCL co-polymers in combination with DPPC and lecithin to address the biopharmaceutical challenges of acalabrutinib (ACP), a selective treatment for different hematological malignancies. Methods: Variations in the mPEG-to-ε-caprolactone ratio influenced both the molecular weight (Mw) of the synthesized co-polymers and their aqueous phase affinity. The ACP-loaded PLHNs (ACP-PLHNs) were optimized using a circumscribed central composite design. The in vivo studies were performed in Wistar rats. Results: The lipophilic mPEG-PCL (Mw = 9817.67 Da) resulted in PLHNs with a particle size of 155.91 nm and 40.08% drug loading, while the hydrophilic mPEG-PCL (Mw = 23,615.84 Da) yielded PLHNs with a relatively larger size (223.46 nm) and relatively higher drug loading (46.59%). The drug release profiles were polymer-grade dependent: lipophilic ACP-PLHNs (lACP-PLHNs) sustained release up to 30 h in pH 7.2 buffer, while hydrophilic ACP-PLHNs (hACP-PLHNs) completed release within 24 h. Stability studies showed greater stability for lACP-PLHNs, likely due to reduced molecular rearrangement from the chemically stable lipophilic co-polymer. Conclusions: Oral administration of both formulations exhibited a 2-fold (p < 0.001) improvement in the C_max and AUC_0-tlast and a 3.9-fold (p < 0.001) increase in the relatively oral bioavailability compared to the conventional ACP suspension in male wistar rats. Full article

Nanomedicine is rapidly evolving, with tailored nanoparticles enabling precise cellular-level interventions. Despite significant advances, challenges, such as rapid clearance and off-target effects, hinder the clinical translation of many nanosystems. Among the available nanoplatforms, gold nanoparticles (AuNPs) stand out due to their unique surface chemistry, low toxicity, and excellent biocompatibility. In this work, we present a multi-level computational investigation of ultra-small AuNPs coated with non-conventional amphiphilic polymer chains via atomistic and coarse-grained molecular dynamics. Through high-level-resolution atomistic simulations, we investigate how variations in grafting density impact the collective behaviors of these amphiphilic polymer chains within the coating by quantifying relevant conformational, structural, and energetic descriptors, such as the radius of gyration, terminal group presentation, polymer coating thickness, brush height, and solvation energy. Our results reveal a conformational shift of polymer chains from coiled to stretched as grafting density increases, with a direct effect on the polymer conformational regime, terminal group presentation, and coating thickness. In parallel, we further benchmark low-level coarse-grained models using the atomistic data as a reference, demonstrating their ability to correctly reproduce the atomistic trends. This computational investigation reveals how key descriptors vary with grafting density and provides the tools for conducting similar studies on broader time and length scales, thereby advancing the rational design of nanosystems for nanomedicine. Full article

Nanotechnology offers alternative approaches to the discovery of anticancer drugs. Hydrophobic bioactive components can be included in the cores of amphiphilic nanocarriers, which leads to the formation of a water-dispersible product with improved bioavailability, facilitated excretion, and reduced systemic toxicity in the treated organisms. This study was aimed at the formation of polymer nanocarriers, loaded with anticancer drug precursor podophylotoxin (PPT) or PPT-containing juniper leaf extracts, seeking to study their antineoplastic activity in A-431 epidermoid carcinoma cells and HaCaT normal keratinocytes. The amphiphilic, biodegradable, and biocompatible MPEG-b-PLA diblock copolymer was self-assembled in aqueous media into nanosized particles, whose physicochemical characteristics were studied by dynamic light scattering, transmission electron microscopy, and other methods. High encapsulation efficiency was determined for the PPT component-loaded micelles. DNA fragmentation, cell cycle arrest, nuclear condensation, membrane lipid order assessment, reactive oxygen species, and apoptosis induction by the loaded nanocarriers in A-431 or HaCaT cells were analyzed by the comet assay, FACS, Hoechst DNA staining, Laurdan generalized polarization, and other methods. As a result of various cellular processes induced by the PPT component-loaded nanoparticles, effector caspase-3 and caspase-7 activation showed selectivity towards tumor cells compared to the normal cells. The newly obtained PPT-containing nanoparticles have applications as potential drugs in the prospective nanomedicine. Full article