Search Results (18)

Textile dyeing wastewater, rich in recalcitrant organic compounds such as azo and anthraquinone dyes, poses significant environmental concerns. This study investigates the degradation of methyl orange (MO) using two ozone (O₃) oxidation systems—O₃/H₂O₂ and O₃/K₂S₂O₈—and analyzes the degradation products and toxicity via ESR characterization. The O₃/K₂S₂O₈ system shows a higher removal rate in the initial stage (<4 min) due to rapid ·SO₄^- radical generation. However, O₃/H₂O₂ produces more ·OH radicals, leading to better overall degradation performance. The O₃/K₂S₂O₈ system is more effective for pollutants with electron-rich groups, such as Congo red and sulfamethoxazole, while O₃/H₂O₂ performs better in natural lake water. Mechanistic studies reveal that ·O₂^- is the dominant oxidizing species in O₃/H₂O₂, while ·SO₄^- and ·O₂^- dominate in O₃/K₂S₂O₈. The toxicity of degradation products is assessed, showing lower bioaccumulation and developmental toxicity in most intermediate products compared to MO. This research provides valuable insights into the use of combined ozonation-peroxidation coupling technology for effective wastewater treatment. Full article

Synthetic dyes, exceeding 100,000 types on the market and produced at a global scale of over 700,000 tons annually, are extensively used in the textile industry. This industry, a leading contributor to water contamination, relies on dyes like reactive, azo, anthraquinone, and triphenylmethane, resulting in substantial water usage and significant effluent generation. A significant modern challenge is the pollution caused by dye-mixed wastewater, releasing hazardous chemicals into water bodies and posing threats to ecosystems, plants, and human health. Traditionally, physicochemical techniques have addressed textile dye-containing wastewater, but their drawbacks, including cost, inefficiency, and potential secondary pollution, have steered attention towards biological alternatives. Utilizing microorganisms and enzymes, these biological methods, such as microbial cell enzyme immobilization, the biofilm technique, bioreactors, biofuel/bioelectricity production, and genetic engineering, have emerged as promising, cost-effective, and environmentally friendly solutions for efficient dye removal from wastewater. This review paper specifically highlights advanced biological techniques and emphasizes their efficacy in addressing the challenges posed by synthetic textile dyes. Through a systematic review of recent research papers, published results, and observations, this review paper provides insights into emerging biological treatment strategies for effectively removing synthetic textile dyes and contaminants from wastewater. Full article

To fully harness the potential of laccase in the efficient decolorization and detoxification of single and mixed dyes with diverse chemical structures, we carried out a systematic study on the decolorization and detoxification of single and mixed dyes using a crude laccase preparation obtained from a white-rot fungus strain, Pleurotus eryngii. The crude laccase preparation showed efficient decolorization of azo, anthraquinone, triphenylmethane, and indigo dyes, and the reaction rate constants followed the order Remazol Brilliant Blue R > Bromophenol blue > Indigo carmine > New Coccine > Reactive Blue 4 > Reactive Black 5 > Acid Orange 7 > Methyl green. This laccase preparation exhibited notable tolerance to SO₄²⁻ salts such as MnSO₄, MgSO₄, ZnSO₄, Na₂SO₄, K₂SO₄, and CdSO₄ during the decolorization of various types of dyes, but was significantly inhibited by Cl⁻ salts. Additionally, this laccase preparation demonstrated strong tolerance to some organic solvents such as glycerol, ethylene glycol, propanediol, and butanediol. The crude laccase preparation demonstrated the efficient decolorization of dye mixtures, including azo + azo, azo + anthraquinone, azo + triphenylmethane, anthraquinone + indigo, anthraquinone + triphenylmethane, and indigo + triphenylmethane dyes. The decolorization kinetics of mixed dyes provided preliminary insight into the interactions between dyes in the decolorization process of mixed dyes, and the underlying reasons and mechanisms were discussed. Importantly, the crude laccase from Pleurotus eryngii showed efficient repeated-batch decolorization of single-, two-, and four-dye mixtures. This crude laccase demonstrated high stability and reusability in repeated-batch decolorization. Furthermore, this crude laccase was efficient in the detoxification of different types of single dyes and mixed dyes containing different types of dyes, and the phytotoxicity of decolorized dyes (single and mixed dyes) was significantly reduced. The crude laccase efficiently eliminated phytotoxicity associated with single and mixed dyes. Consequently, the crude laccase from Pleurotus eryngii offers significant potential for practical applications in the efficient decolorization and management of single and mixed dye pollutants with different chemical structures. Full article

The introduction of synthetic dyes completely changed the industrial production and use of colorants for art materials. From the synthesis of the first synthetic dye, mauveine, in 1856 until today, artists have enjoyed a wider range of colors and selection of chemical properties than was ever available before. However, the introduction of synthetic dyes introduced a wider variety and increased the complexity of the chemical structures of marketed dyes. This work looks towards the analysis of synthetically dyed objects in heritage collections, applying an extraction protocol based on the use of ammonia, which is considered favorable for natural anthraquinone dyes but has never before been applied to acid synthetic dyes. This work also presents an innovative cleanup step based on the use of an ion pair dispersive liquid–liquid microextraction for the purification and preconcentration of historical synthetic dyes before analysis. This approach was adapted from food science analysis and is applied to synthetic dyes in heritage science for the first time in this paper. The results showed adequate recovery of analytes and allowed for the ammonia-based extraction method to be applied successfully to 15 samples of suspected azo dyes from the Azienda Coloranti Nazionali e Affini (ACNA) synthetic dye collection, identified through untargeted HPLC-HRMS analyses. Full article

Anthraquinone dyes are the second most important type of dyes after azo dyes. In particular, 1-aminoanthraquinone has been extensively utilized in the preparation of diverse anthraquinone dyes. This study employed a continuous-flow method to synthesize 1-aminoanthraquinone safely and efficiently through the ammonolysis of 1-nitroanthraquinone at high temperatures. Various conditions (reaction temperature, residence time, molar ratio of ammonia to 1-nitroanthraquinone (M-ratio), and water content) were investigated to explore the details of the ammonolysis reaction behavior. Operation conditions for the continuous-flow ammonolysis were optimized using Box–Behnken design in the response surface methodology, and ~88% yield of 1-aminoanthraquinone could be achieved with an M-ratio of 4.5 at 213 °C and 4.3 min. The developed process’s reliability was evaluated by performing a 4 h process stability test. The kinetic behavior for the preparation of 1-aminoanthraquinone was investigated under continuous-flow mode to guide the reactor design and to gain a deeper understanding of the ammonolysis process. Full article

Bleaching is a common modification method widely used in the industrialization of wood dyeing. Bleaching can regulate the color of the wood, and it also has great effects on the subsequent wood dyeing properties. In this work, three woods, Ayous, Linden, and Poplar, were processed by using the NaOH/H₂O₂/Na₂SiO₃ bleach pretreatment method. Then, the pretreated wood and untreated wood were stained separately by means of water bath dyeing with three dyestuffs: blue anthraquinone and red and yellow double-azo dyestuffs. The study mainly focused on the effect of the bleach pretreatment on the color control and dyeing properties of the wood by analyzing the color difference, staining rate, and final dyeing rate of the dyed wood. The results were as follows: For the color difference, the L* and h* values showed increasing tends, while the a*, b*, and c* values showed decreasing trends. For the staining rate, Ayous reached an equilibrium staining rate at 3~4 h, but for the others, this was not obvious. For the dyeing rate, red and blue Linden veneers and blue Ayous veneers were similar to the unbleached ones, while the final dyeing rate of the other veneers was less than that of the original wood, and the staining rate of the Ayous red and yellow veneer, Linden yellow veneer, and Poplar veneer was less than that of the original wood. The final dyeing rate of the Ayous red and yellow veneers, Linden yellow veneer, and Poplar red, yellow and blue veneers decreased by 4.54%, 2.91%, 5.45%, 10.75%, 2.66%, and 9.55%, respectively. In general, the bleach pretreatment made the staining color of the material surface uniform. The dyeing rate increased due to the increase of the veneers’ permeability. Thus, the veneers quickly reached the equilibrium staining rate, but the equilibrium staining rate of some test pieces decreased. This work provides scientific support for the dyeing process. Full article

UV-based advanced oxidation processes (AOPs) (UV/H₂O₂ and UV/S₂O₈²⁻) with a titanium(IV)-doped carbon dot, TiP-CD, as a catalyst were developed for the decomposition of Remazol Brilliant Blue R (Reactive Blue 19), an anthraquinone textile dye (at T = 25 °C and pH = 7). The Ti-CD, with marked catalytic UV properties, was successfully synthesized by the one-pot hydrothermal procedure, using L-cysteine as carbon precursor, ethylenediamine as nitrogen source, PEG (polyethylene glycol) as a capping agent, and titanium(IV) isopropoxide (precursor of TiO₂ doping). Contrary to azo dyes (methyl orange, orange II sodium salt, and reactive black 5), which achieved complete degradation in a time interval less than 30 min in the developed AOP systems (UV/H₂O₂, UV/S₂O₈²⁻, and UV/TiO₂), the RBB-R showed relatively low degradation rates and low discoloration rate constants. In the presence of the catalyzer, the reaction rate significantly increased, and the pseudo-first-order rate constants for the RBB-R discoloration were UV/3.0 mM H₂O₂/TIP-CD-0.0330 min⁻¹ and UV/1.02 mM S₂O₈²⁻/TIP-CD-0.0345 min⁻¹. Full article

A TiO₂/ZnO oxide system was proposed as a support for the immobilization of laccase from Trametes versicolor (LTV). The obtained TiO₂/ZnO/LTV biocatalytic system was then applied in the decolorization/degradation of C.I. Reactive Black 5 and C.I. Acid Green 25 dyes. The efficiency of immobilization was evaluated based on catalytic properties (Bradford method, oxidation reaction of 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)) and physicochemical (spectroscopic, porous, electrokinetic) analysis. The immobilization process was carried out with high performance (99.4%). Immobilized laccase retained about 40% of its activity in the whole analyzed temperature range and after 10 reaction cycles. Immobilization efficiency was also indirectly confirmed by the presence of characteristic functional groups (–C–H and –C–O), nitrogen and carbon on the TiO₂/ZnO/LTV biocatalytic surface, identified by spectroscopic analyses. The increase in the surface area to 126 m²/g, change of isoelectric point (2.0) and zeta potential ranges (from +12.0 to −20.0 mV) after the immobilization process were also observed. The results show that the designed biocatalytic system enables the removal of acid dyes (C.I. Reactive Black 5 and C.I. Acid Green 25) with high efficiency (99% and 70%, respectively). Mass spectroscopy analysis indicated possible degradation products formed by the cleavage of N=N and C–N bonds. Full article

Six fungal strains were isolated from the textile industry effluent in which they naturally occur. Subsequently, the fungal strains were identified and characterized in order to establish their potential decolorizing effect on textile industry effluents. The strains of interest were selected based on their capacity to decolorize azo, indigo, and anthraquinone dyes. Three of the strains were identified as Emmia latemarginata (MAP03, MAP04, and MAP05) and the other three as Mucor circinelloides (MAP01, MAP02, and MAP06), while the efficiency of their decolorization of the dyes was determined on agar plate and in liquid fermentation. All the strains co-metabolized the dyes of interest, generating different levels of dye decolorization. Plate screening for lignin-degrading enzymes showed that the MAP03, MAP04, and MAP05 strains were positive for laccase and the MAP01, MAP02, and MAP06 strains for tyrosinase, while all strains were positive for peroxidase. Based on its decolorization capacity, the Emmia latemarginata (MAP03) strain was selected for the further characterization of its growth kinetics and ligninolytic enzyme production in submerged fermentation under both enzyme induction conditions, involving the addition of Acetyl yellow G (AYG) dye or wheat straw extract, and no-induction condition. The induction conditions promoted a clear inductive effect in all of the ligninolytic enzymes analyzed. The highest level of induced enzyme production was observed with the AYG dye fermentation, corresponding to versatile peroxidase (VP), manganese peroxidase (MnP), and lignin peroxidase (LiP). The present study can be considered the first analysis of the ligninolytic enzyme system of Emmia latemarginata in submerged fermentation under different conditions. Depending on the results of further research, the fungal strains analyzed in the present research may be candidates for further biotechnological research on the decontamination of industrial effluents. Full article

The dye-decolorizing peroxidases (DyP) are a family of heme-dependent enzymes present on a broad spectrum of microorganisms. While the natural function of these enzymes is not fully understood, their capacity to degrade highly contaminant pigments such as azo dyes or anthraquinones make them excellent candidates for applications in bioremediation and organic synthesis. In this work, two novel DyP peroxidases from the organism Rhodococcus opacus 1CP (DypA and DypB) were cloned and expressed in Escherichia coli. The enzymes were purified and biochemically characterized. The activities of the two DyPs via 2,2′-azino-bis [3-ethylbenzthiazoline-6-sulphonic acid] (ABTS) assay and against Reactive Blue 5 were assessed and optimized. Results showed varying trends for DypA and DypB. Remarkably, these enzymes presented a particularly high tolerance towards H₂O₂, retaining its activities at about 10 mM H₂O₂ for DypA and about 4.9 mM H₂O₂ for DypB. Full article

DyP-type peroxidases are a family of heme peroxidases named for their ability to degrade persistent anthraquinone dyes. DyP-type peroxidases are subclassified into three classes: classes P, I and V. Based on its genome sequence, Streptomyces avermitilis, eubacteria, has two genes presumed to encode class V DyP-type peroxidases and two class I genes. We have previously shown that ectopically expressed SaDyP2, a member of class V, indeed has the characteristics of a DyP-type peroxidase. In this study, we analyzed SaDyP1, a member of the same class V as SaDyP2. SaDyP1 showed high amino acid sequence identity to SaDyP2, retaining a conserved GXXDG motif and catalytic aspartate. SaDyP1 degraded anthraquinone dyes, which are specific substrates of DyP-type peroxidases but not azo dyes. In addition to such substrate specificity, SaDyP1 showed other features of DyP-type peroxidases, such as low optimal pH. Furthermore, immunoblotting using an anti-SaDyP2 polyclonal antibody revealed that SaDyP1 and/or SaDyP2 is expressed in mycelia of wild-type S. avermitilis. Full article

The co-occurrence of multiple mycotoxins, including aflatoxin B₁ (AFB₁), zearalenone (ZEN) and deoxynivalenol (DON), widely exists in cereal-based animal feed and food. At present, most reported mycotoxins degrading enzymes target only a certain type of mycotoxins. Therefore, it is of great significance for mining enzymes involved in the simultaneous degradation of different types of mycotoxins. In this study, a dye-decolorizing peroxidase-encoding gene BsDyP from Bacillus subtilis SCK6 was cloned and expressed in Escherichia coli BL21/pG-Tf2. The purified recombinant BsDyP was capable of oxidizing various substrates, including lignin phenolic model compounds 2,6-dimethylphenol and guaiacol, the substrate 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid), anthraquinone dye reactive blue 19 and azo dye reactive black 5, as well as Mn²⁺. In addition, BsDyP could efficiently degrade different types of mycotoxins, including AFB₁, ZEN and DON, in presence of Mn²⁺. More important, the toxicities of their corresponding enzymatic degradation products AFB₁-diol, 15-OH-ZEN and C₁₅H₁₈O₈ were significantly lower than AFB₁, ZEN and DON. In summary, these results proved that BsDyP was a promising candidate for the simultaneous degradation of multiple mycotoxins in animal feed and food. Full article

In order to minimize the pollution caused by the reuse of textile dyes, technologies and materials have been developed that purify waste water in an efficient and cost-effective manner before it is discharged into a water body. In this context, the presented research investigates the potential of two types of fully cellulose-based membranes as adsorbents for cationic dyes used in the textile industry. The first type combines cellulose nanofibrils (CNFs) and carboxymethylated cellulose (CMC) using the solvent casting process and an esterification coupling reaction, while the second type uses commercial bacterial cellulose (BC) in a native and sodium periodate-treated form (BCox). The corresponding membranes were comprehensively evaluated by means of Fourier Transform Infrared (FTIR) Spectroscopy. Results confirm the esterification process within the CNF/CMC membranes, as well as BC oxidation after periodate treatment, as shown by bands at 1726.2 cm⁻¹ and 895 cm⁻¹, respectively. The Potentiometric Titration shows the highest total negative charge of 1.07 mmol/g for 4CNF/4CMC, which is assigned to the presence of COO⁻ within CMC polymers, and lowest (0.21 mmol/g) for BCox. The Contact Angle Goniometry data confirm the hydrophilicity of all membranes, and the angle increased from 0 ° (in pure BC) to 34.5 ° in CMC-rich and to 31.4 ° in BCox membranes due to the presence of CH₂COO⁻ and CHO groups, respectively. Confocal Fluorescent Microscopy (CFM) demonstrated the highest µ-roughness in 4CNF/4CMC, while Scanning Electron Microscopy (SEM) depicted diverse morphological features between the membranes, from ultrafine nanofiber networks (in BC and BCox) to larger fiber bundles connected within the polymer phase in CNF/CMC membranes. The adsorption experiment followed by UV–VIS spectroscopy, showed ~100% dye removal efficiency in both CNF/CMC-based membranes, while BC and BCox adsorbed only 24.3% and 23.6%, respectively, when anthraquinone dye was used. Azo dye was only adsorbed with an efficiency of 7–9% on CMC/CNF-based membranes, compared with 5.57% on BC and 7.33% on BCox membranes. The adsorption efficiency at equilibrium was highest for BC (1228 mg/g) and lowest for 7CNF/1CMC (419.24 mg/g) during anthraquinone dye adsorption. In the case of azo dye, the BCox was most effective, with 445.7 mg/g. Applicability of a pseudo second-order model was confirmed for both dyes and all membranes, except for BCox in combination with azo dye, showing the fastest adsorption rate in the case of the 7CNF/1CMC membrane. Full article

Electro-fluidic display (EFD) is one of the most promising reflective displays because of its full color and video speed. Colored EFD oil, which normally consists of soluble organic dyes and non-polar solvent, plays a critical role in color, electro-optical behavior, and the reliability of the EFD devices. In this paper, we report our research on two kinds of electro-fluidic dyes based on anthraquinone and azo pyrazolone, including their synthesis, structure characterization, and application properties. Changes of absorbance curves, color coordinates of oils, and photoelectric responses of devices were studied in detail under accelerated irradiation to investigate the photo-stability and reliability properties of synthesized oil materials and devices. Photoelectric responses and photo stability of dyes are highly varied depending on their structures. We found that 1,4-dlialkylamino anthraqinone and mono azo pyrazolone dyes are much more stable than 1,8-dlialkylamino anthraqinone and corresponding bisazo pyrazolone dyes. Full article

A novel blue azo-anthraquinone reactive dye was evaluated in the dyeing of cotton by using a dip–pad–steam process. Dyeing method and properties were examined in detail and the results showed that the dyeing method consisting of dye concentration of 25 g/L, sodium carbonate of 12 g/L, dipping time of 3 min and steaming time of 30 min was the most effective when a conventional “one-dip–one-nip” process was used. The fixation of the dyes on cotton could reach up to 93.4%, the wash and rub fastness both reached grade 4 above, and the light fastness reached grade 4–5 above. Such colored cotton showed very close colorimetric properties. Full article