Search Results (118)

This paper presents a detailed analysis of the thermal and flammability properties of polylactide- (PLA) and poly(ethylene terephthalate)- (PET) based polymer blends with biofillers, such as calcium lignosulfonate (CLS), lignosulfonamide (SA) and lignosulfonate modified with tannic acid (BMT) and gallic acid (BMG). Calorimetric studies revealed the presence of two glass transitions, one cold crystallization temperature, and two melting points, confirming the partial immiscibility of the PLA and PET phases. The additives had different effects on the temperatures and ranges of phase transformations—BMT restricted PLA chain mobility, while CLS acted as a nucleating agent that promoted crystallization. Thermogravimetric analyses (TGA) analyses showed that the additives significantly affected the thermal stability under oxidizing conditions, some (e.g., BMG) lowered the onset degradation temperature, while the others (BMT, SA) increased the residual char content. The additives also altered combustion behavior; particularly BMG that most effectively reduced flammability, promoted char formation, and extended combustion time. CLS reduced PET flammability more effectively than PLA, especially at higher PET content (e.g., 65% reduction in PET for 2:1/CLS). SA inhibited only PLA combustion, with strong effects at higher PLA content (up to 76% reduction for 2:1/SA). BMT mainly reduced PET flammability (48% reduction in 1:1/BMT), while BMG inhibited PET more strongly at lower PET content (76% reduction for 2:1/BMG). The effect of each additive also depended on the PLA:PET ratio in the blend. FTIR analysis of the char residues revealed functional groups associated with decomposition products of carboxylic acids and aromatic esters. Ultimately, only blends containing BMT and BMG met the requirements for flammability class FV-1, while SA met FV-2 classification. BMG was the most effective additive, offering enhanced thermal stability, ignition delay, and durable char formation, making it a promising bio- based flame retardant for sustainable polyester materials. Full article

This study investigates the surface properties of bio-based unsaturated polyester resin (b-UPR) nanocomposites reinforced with biosilica nanoparticles derived from rice husk. The b-UPR matrix was synthesized from recycled polyethylene terephthalate (PET) and renewable monomers, providing a sustainable alternative to conventional polyester resins. Unmodified and modified biosilica particles with silanes: (3-trimethoxysilylpropyl methacrylate—MEMO, trimethoxyvinylsilane—VYNIL, and 3-aminopropyltrimethoxysilane with biodiesel—AMBD) were incorporated in different amounts to evaluate their influence on the wettability, topography, and viscoelastic behavior of the composites. Contact angle measurements revealed that the addition of modified biosilica significantly improved the hydrophobicity of the b-UPR surface. The greatest increase in the wetting angle, amounting to 79.9% compared to composites with unmodified silica, was observed in the composites containing 5 wt.% SiO₂-AMBD. Atomic force microscopy (AFM) analysis indicated enhanced surface roughness and uniform dispersion of the nanoparticles. For the composite containing 1 wt.% of silica particles, the surface roughness increased by 25.5% with the AMBD modification and by 84.2% with the MEMO modification, compared to the unmodified system. Creep testing demonstrated that the reinforced nanocomposites exhibited improved dimensional stability under sustained load compared to the neat resin. These findings confirm that the integration of surface-modified biosilica not only enhances the mechanical properties but also optimizes the surface characteristics of bio-based polyester composites, broadening their potential for high-performance and sustainable applications. Full article

As the global plastic pollution problem intensifies and the environmental hazards of traditional petroleum-based plastics become increasingly significant, the development of sustainable alternative materials has become an urgent need. This paper systematically reviews the research progress, application status and future trends of new generation bioplastics in the field of food packaging. Bioplastics are categorized into three main groups according to their sources and degradability: biobased biodegradable materials (e.g., polylactic acid PLA, polyhydroxy fatty acid ester PHA, chitosan, and cellulose-based materials); biobased non-biodegradable materials (e.g., Bio-PE, Bio-PET); and non-biobased biodegradable materials (e.g., PBAT, PCL, PBS). Different processing technologies, such as thermoforming, injection molding, extrusion molding and coating technologies, can optimize the mechanical properties, barrier properties and freshness retention of bioplastics and promote their application in scenarios such as food containers, films and smart packaging. Although bioplastics still face challenges in terms of cost, degradation conditions and industrial support, promising future directions are found in the development of the large-scale utilization of non-food raw materials (e.g., agricultural waste, algae), nano-composite technology to enhance the performance, and the development of intelligent packaging functions. Through technological innovation and industry chain integration, bioplastics are expected to transform from an environmentally friendly alternative to a mainstream packaging material, helping to realize the goal of global carbon neutrality. Full article

The factual circularity of materials needs utilization of materials that keep their quality properties after going through recycling to minimize the inflow of virgin materials in the technosphere. Within the PEF methodology, and based on the economic model approach, the European Commission provides default parameters for the quality changes of the polymers after recycling, but solely for some fossil-based polymers. This study provides a test-based example for the calculation of technical substitutability for 2 fossil-based polymers (HDPE and PET) and 2 bio-based polymers (PLA and PHB) based on mechanical, processing, and optical properties. The results show that the economic substitutability method gives very different results compared to those obtained by considering real technical quality changes of the polymers in multiple-cycle recycling. HDPE proved to have superior circular properties compared to any other polymer under research. In addition, the recent practice of substituting fossil-based with bio-based polymers will need to be re-evaluated after additional research related to the quality change of bio-based polymers in recycling. The results showed the important limitations of the economic substitutability method and a strong need for a harmonized testing method for the calculation of quality degradation of all types of polymers in recycling. Full article

With the increasing urgency of petroleum resource scarcity and environmental challenges, the development of degradable bio-based flame retardants has become crucial for enhancing the fire safety of organic materials. In this work, a phosphorus-containing chitosan derivative (CS-PPOA) was synthesized via a one-step protonation reaction between chitosan (CS) and phenylphosphinic acid (PPOA) under mild conditions. The resulting multifunctional flame-retardant coating was applied to polyester (PET) fabrics. Comprehensive characterization using FT-IR, XPS, and NMR confirmed the successful protonation of chitosan amino groups through electrostatic interactions, forming a stable ionic complex. The CS-PPOA solution exhibited excellent rheological properties and film-forming ability, producing films with over 80% optical transmittance and flexibility. Thermogravimetric analysis (TGA) revealed that CS-PPOA achieved char residue yields of 76.8% and 40.2% under nitrogen and air atmospheres, respectively, significantly surpassing those of acetic acid-protonated chitosan (CS-HAc). The limiting oxygen index (LOI) of CS-PPOA increased to 48.3%, and vertical burning tests demonstrated rapid self-extinguishing behavior. When applied to PET fabrics at a 15% loading, the LOI value improved from 20.3% (untreated fabric) to 27.8%, forming a dense char layer during combustion while completely suppressing melt dripping. Additionally, the coated fabric exhibited broad-spectrum antibacterial activity, achieving a 99.99% inhibition rate against Escherichia coli and Staphylococcus aureus. This study provides a novel strategy for the green and efficient preparation of multifunctional bio-based flame-retardant coatings. Full article

Printed electronics employ established printing methods to create low-cost, mechanically flexible devices including batteries, supercapacitors, sensors, antennas and RFID tags on plastic, paper and textile substrates. This review focuses on the specific contribution of screen printing to that landscape, examining how ink viscosity, mesh selection and squeegee dynamics govern film uniformity, pattern resolution and ultimately device performance. Recent progress in advanced ink systems is surveyed, highlighting carbon allotropes (graphene, carbon nano-onions, carbon nanotubes, graphite), silver and copper nanostructures, MXene and functional oxides that collectively enhance mechanical robustness, electrical conductivity and radio-frequency behavior. Parallel improvements in substrate engineering such as polyimide, PET, TPU, cellulose and elastomers demonstrate the technique’s capacity to accommodate complex geometries for wearable, medical and industrial applications while supporting environmentally responsible material choices such as water-borne binders and bio-based solvents. By mapping two decades of developments across energy-storage layers and functional electronics, the article identifies the key process elements, recurring challenges and emerging sustainable practices that will guide future optimization of screen-printing materials and protocols for high-performance, customizable and eco-friendly flexible devices. Full article

To tackle growing resource and environmental challenges, closed-loop chemical recycling of waste PET is gaining significant attention. Methanolysis demonstrates significant industrial potential due to the ease of separation and purification of its depolymerization product, dimethyl terephthalate (DMT). However, conventional methanolysis processes for PET typically require harsh conditions (>200 °C and 2–4 MPa), highlighting the need for more efficient and milder methods. In this work, leveraging Hansen’s solubility parameter theory, a bio-based solvent gamma-valerolactone (GVL) was introduced to construct a binary mixed solvent system, enabling highly efficient depolymerization of PET. Through systematic optimization of reaction conditions, an in-depth analysis of the effects of various factors on depolymerization efficiency and kinetics was conducted. The incorporation of GVL markedly enhanced the compatibility between the solvent and PET, thereby significantly improving depolymerization efficiency while effectively lowering the reaction temperature and pressure. Complete depolymerization of PET can be achieved within 2 h at 150 °C under a pressure of 0.9 MPa, with a DMT yield of up to 97.8%. This GVL/methanol depolymerization system exhibits higher efficiency, milder reaction conditions, and substantial advantages in terms of environmental impact and energy consumption indicators. By using the renewable bio-based solvent GVL, this technology aligns with the core principles of green chemistry and provides an efficient, feasible, and innovative pathway for sustainable closed-loop PET recycling. Full article

Background/Objectives: Gliomas, including the most aggressive subtype—glioblastoma multiforme, are brain tumors with an unfavorable prognosis and high mortality. Early diagnosis is essential to improve treatment efficacy. Positron emission tomography PET with O-(2-[¹⁸F] fluoroethyl)-L-tyrosine ([¹⁸F]FET) has been supported by clinical studies for its role in diagnosis and monitoring the disease. However, the low availability of [¹⁸F]FET in Italy has limited its use in clinical praxis. This study describes the technological transfer of the radiopharmaceutical IASOglio^® (the commercial [¹⁸F]FET developed by Curium Pharma in Italy), with the aim of improving national access to this advanced diagnostic technology. Methods: Three consecutive batches were produced using the automated Trasis AllinOne module, and quality control was performed, including chemical and microbiological tests, to successfully validate the production process. Additionally, the stability of the radiopharmaceutical for its entire shelf life has been demonstrated with stability testing at 14 h after end of synthesis (EOS). Results: The production of [¹⁸F]FET achieved a non-corrected yield between 49% and 52%, with a corrected decay rate ranging from 73% to 79%. The process met the required quality specifications, including bio-burden control and filter integrity. The technological transfer was successfully completed, and production authorization was obtained from the Italian Medicines Agency (AIFA) for the Officina Farmaceutica of Institute of Clinical Physiology of the National Research Council (CNR-IFC) located in Pisa. Conclusions: Local production of [¹⁸F]FET in Italy marks a milestone in glioma diagnosis, thereby contributing to timely treatment and improved clinical outcomes. Full article

Sustainability in food production is a pressing priority due to environmental and political crises, the need for long-term food security, and feeding the populace. Food producers need to increasingly adopt sustainable practices to reduce negative environmental impacts and food waste. The ocean is a source for sustainable food systems; deforestation, water scarcity, and greenhouse gas emissions burden traditional, terrestrial resources. Our oceans contain the largest unexploited resource in the world in the form of mesopelagic fish species, with an estimated biomass of 10 billion metric tons. This resource is largely untapped due in part to the difficulties in harvesting these species. To ensure sustainability of this resource, management of fish stocks and fish processing practices must be optimised. Generation of fish protein hydrolysates from by-catch/underutilised species creates high-value, functional ingredients while also reducing waste. Marine hydrolysates offer a renewable source of nutrition and align with the principles of the circular economy, where waste is minimised and resources are reused efficiently. Ocean-derived solutions demand fewer inputs, generate less pollution, and have a smaller carbon footprint compared to traditional agriculture. This review collates clearly and succinctly the current and potential uses of FPHs for different market sectors and highlights the advantages of their use in terms of the scientifically validated health benefits for humans and animals and fish, and the protection and crop yield benefits that are documented to date from scientific studies. Full article

This paper presents an experimental investigation of six different types of composite sandwich panels manufactured from waste-based materials, which are comprised of two different types of skins (made from hemp and recycled PET (Polyethylene terephthalate) fabrics with bio-epoxy resin) and three different cores (composite wood, recycled plastic, and styrofoam) materials. The skins of these sandwich panels were investigated under five different environmental conditions (normal air, water, hygrothermal, saline solution, and 80 °C elevated temperature) over seven months to evaluate their durability performance. In addition, the tensile and dynamic mechanical properties of those sandwich panels were studied. The bending behavior of cores and sandwich panels was also investigated and compared. The results indicated that elevated temperatures are 30% more detrimental to fiber composite laminates than normal water. Composite laminates made of hemp are more sensitive to environmental conditions than composite laminates made of recycled PET. A higher-density core makes panels more rigid and less susceptible to indentation failure. The flexible plastic cores are found to be up to 25% more effective at increasing the strength of sandwich panels than brittle wood cores. Full article

The need for sustainable and efficient water decontamination methods has led to the increasing use of redox enzymes such as glucose oxidase (GOx). GOx immobilization on textile supports provides a promising alternative for catalyzing pollutant degradation in bio-Fenton (BF) and bio-electro-Fenton (BEF) systems. However, challenges related to enzyme stability, reusability, and environmental impact remain a concern. This communication paper outlines innovative strategies developed to address these challenges, notably the use of ecotechnologies to achieve efficient GOx immobilization while maintaining biocatalytic activity. Plasma ecoprocesses, amino-bearing biopolymer-chitosan, as well as a bio-crosslinker genipin have been used efficiently on conductive carbon and non-conductive polyester-PET nonwovens. In certain cases, immobilized GOx can retain high catalytic activity after multiple cycles, making them an effective biocatalyst for organic dye degradation (Crystal Violet and Remazol Blue) via bio-Fenton reactions, including total heterogeneous bio-Fention system. Moreover, the conductive carbon felt-based bioelectrodes successfully supported simultaneous pollutant degradation and energy generation in a BEF system. This work highlights the potential of textile-based enzyme immobilization for sustainable wastewater treatment, bio-electrochemical energy conversion, and also for bacterial deactivation. Future research will focus on optimizing enzyme stability and enhancing BEF efficiency for large-scale applications. Full article

Nanoarchitectonics influences the properties of objects at micro- and even macro-scales, aiming to develop better structures for protection of product. Although its applications were analyzed in different areas, nanoarchitectonics of food packaging—the focus of this review—has not been discussed, to the best of our knowledge. The (A) structural and (B) functional hierarchy of food packaging is discussed here for the enhancement of protection, extending shelf-life, and preserving the nutritional quality of diverse products including meat, fish, dairy, fruits, vegetables, gelled items, and beverages. Interestingly, the structure and design of packaging for these diverse products often possess similar principles and methods including active packaging, gas permeation control, sensor incorporation, UV/pulsed light processing, and thermal/plasma treatment. Here, nanoarchitechtonics serves as the unifying component, enabling protection against oxidation, light, microbial contamination, temperature, and mechanical actions. Finally, materials are an essential consideration in food packaging, particularly beyond commonly used polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), polystyrene (PS), and polyvinyl chloride (PVC) plastics, with emphasis on biodegradable (polybutylene succinate (PBS), polyvinyl alcohol (PVA), polycaprolactone (PCL), and polybutylene adipate co-terephthalate (PBAT)) as well as green even edible (bio)-materials: polysaccharides (starch, cellulose, pectin, gum, zein, alginate, agar, galactan, ulvan, galactomannan, laccase, chitin, chitosan, hyaluronic acid, etc.). Nanoarchitechnotics design of these materials eventually determines the level of food protection as well as the sustainability of the processes. Marketing, safety, sustainability, and ethics are also discussed in the context of industrial viability and consumer satisfaction. Full article

Human–animal relationships have long been idealized as universally positive, but recent studies highlight the complexities and contradictions inherent in this bond. This study re-analyzes previously published data to examine the nuanced effects of pet ownership on human well-being, particularly under stressful circumstances such as the COVID-19 pandemic. Using a mixed-methods approach, data from three independent surveys (n = 840) were re-analyzed to explore the bio-psychosocial implications of pet companionship. Key instruments included the Quality of Life Questionnaire (WHOQOL-BREF), Beck Depression Inventory (BDI-II), and Lexington Attachment to Pets Scale (LAPS). Results revealed that pet ownership was significantly associated with higher levels of psychosocial stress, challenging the assumption that pets universally improve quality of life. Notably, individuals with current pet ownership reported lower quality of life compared to non-owners. However, qualitative analyses illustrated perceived emotional and social support among pet owners, reflecting the “pet-effect paradox.” Mental health variables such as depression and loneliness emerged as stronger predictors of well-being than pet attachment. This study introduces the “Aunty Phenomenon” as a conceptual framework to describe the idealization of pet relationships, while acknowledging the responsibilities they entail. These findings underscore the importance of a holistic approach to human–animal bond research. Full article

Poly(ethylene furanoate) (PEF) has been identified as a bio-based alternative or supplement to poly(ethylene terephthalate) (PET) for various applications such as food packaging and bottles as well as technical- and high-performance fibers and yarns. In this study, the processing of PEF nonwovens in the meltblow process is successfully demonstrated and reported for the first time, according to our best knowledge The resulting fabrics achieved median fiber diameters of 2.04 µm, comparable to PET. The filtration efficiency of 25 g m⁻² fabrics exceeded 50% comparable to PET and PBT of the same grammage and was raised to over 90% with post-process electrostatic charging, maintaining stability. As for other aromatic polymers, applying infrared heating modules into the process indicated the potential to minimize heat shrinkage. However, the suppressed ring rotation and slower crystallization kinetics of PEF showed the need for longer post-treatment times as the heat shrinkage remained between 20% and 40% at 10 °C. Overcoming this, PEF can be a viable, bio-based alternative to PET, particularly for such high-temperature nonwoven applications that require thin layers. Full article

Plastic pollution, particularly from microplastics (MPs) and nanoplastics (NPs), has become a critical environmental and health concern due to their widespread distribution, persistence, and potential toxicity. MPs and NPs originate from primary sources, such as cosmetic microspheres or synthetic fibers, and secondary fragmentation of larger plastics through environmental degradation. These particles, typically less than 5 mm, are found globally, from deep seabeds to human tissues, and are known to adsorb and release harmful pollutants, exacerbating ecological and health risks. Effective detection and quantification of MPs and NPs are essential for understanding and mitigating their impacts. Current analytical methods include physical and chemical techniques. Physical methods, such as optical and electron microscopy, provide morphological details but often lack specificity and are time-intensive. Chemical analyses, such as Fourier transform infrared (FTIR) and Raman spectroscopy, offer molecular specificity but face challenges with smaller particle sizes and complex matrices. Thermal analytical methods, including pyrolysis gas chromatography–mass spectrometry (Py-GC-MS), provide compositional insights but are destructive and limited in morphological analysis. Emerging (bio)sensing technologies show promise in addressing these challenges. Electrochemical biosensors offer cost-effective, portable, and sensitive platforms, leveraging principles such as voltammetry and impedance to detect MPs and their adsorbed pollutants. Plasmonic techniques, including surface plasmon resonance (SPR) and surface-enhanced Raman spectroscopy (SERS), provide high sensitivity and specificity through nanostructure-enhanced detection. Fluorescent biosensors utilizing microbial or enzymatic elements enable the real-time monitoring of plastic degradation products, such as terephthalic acid from polyethylene terephthalate (PET). Advancements in these innovative approaches pave the way for more accurate, scalable, and environmentally compatible detection solutions, contributing to improved monitoring and remediation strategies. This review highlights the potential of biosensors as advanced analytical methods, including a section on prospects that address the challenges that could lead to significant advancements in environmental monitoring, highlighting the necessity of testing the new sensing developments under real conditions (composition/matrix of the samples), which are often overlooked, as well as the study of peptides as a novel recognition element in microplastic sensing. Full article