Search Results (102)

In the present study three composite materials based on iron in combination with bismuth, copper or lithium carbonates FeNO₃@Li₂CO₃ (SFL), FeNO₃@CuCO₃ (SFC), and FeNO₃@(BiO)₂CO₃ (SFB) were synthesized by coprecipitation. The purpose was to obtain materials that possess targeted adsorbent properties for the recovery of silver ions from aqueous solutions. After synthesis, to emphasize the adsorptive qualities of materials for the recovery of silver ions, the synthesized composite materials, as well as those doped with silver ions following the adsorption process (SFL-Ag, SFC-Ag, and SFB-Ag), were characterized and several adsorption-specific parameters were examined, including temperature, contact time, pH, adsorbent dose, and the initial concentration of silver ions in solution. Subsequently, the ideal adsorption conditions were determined to be as follows: pH > 4, contact time 60 min, temperature 298 K, and solid–liquid ratio (S–L) of 0.1 g of adsorbent to 25 mL of Ag (I) solution for all three materials. The Langmuir model properly fits the experimental equilibrium data of the adsorption process; however, the Ho–McKay model closely represents the adsorption kinetics. The maximum adsorption capacities of the materials, 19.7 mg Ag(I)/g for SFC, 19.3 mg Ag(I)/g for SFB, and 19.9 mg Ag(I)/g for SFL, are comparable. The adsorption mechanism is physical in nature, as evidenced by the activation energies of 1.6 kJ/mol for SFC, 4.15 kJ/mol for SFB, and 1.32 kJ/mol for SFL. The highest Ag(I) concentration used for doping all three materials in the study was 150 mg Ag(I)/L. The process is endothermic, spontaneous, and takes place at the interface between the adsorbent and the adsorbate, according to thermodynamic theory. Subsequently, the antimicrobial activity against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans microorganisms was evaluated by rate of inhibition assessment. The SFC-Ag material showed a percentage of 100% inhibition with respect to the positive control for each microorganism. All synthetized materials have better efficiency as antifungal agents. Full article

Sulfonamides represent a versatile class of biologically active compounds, best known for their antibacterial activity, but increasingly investigated for their potential in oncology. Free sulfonamides themselves display cytotoxic properties; however, coordination with metal ions often enhances both selectivity and potency, while also introducing new mechanisms of action. Although numerous studies have reported sulfonamide–metal complexes with anticancer activity, a systematic overview linking biological properties to the central metal atom has been lacking. This review summarizes current research on sulfonamide complexes with transition metals and selected main-group elements, focusing on their pharmacological potential as anticancer agents. The compounds discussed include complexes of titanium, chromium, manganese, rhenium, ruthenium, osmium, iridium, palladium, platinum, copper, silver, gold, iron, cobalt, nickel, uranium, calcium, magnesium and bismuth. For each group, representative structures are presented along with cytotoxicity data against cancer cell lines, comparisons with reference drugs such as for example cisplatin, and where relevant, studies on carbonic anhydrase inhibition. The survey of available data demonstrates that many sulfonamide–metal complexes show cytotoxic activity comparable to or greater than existing chemotherapeutic agents, while in some cases exhibiting reduced toxicity toward non-cancerous cells. These findings highlight the promise of sulfonamide–metal complexes as a fertile area for anticancer drug development and provide a framework for future design strategies. This review covers the research on anti-cancer activity of sulfonamide complexes during the years 2007–2025. Full article

This study evaluates the larvicidal effects of three common water disinfectants, silver (AgNO₃), copper (CuSO₄·5H₂O), and hypochlorite (NaOCl) ions. The treatments were combined at 40–50% of their recommended drinking water guidelines and tested against late first instar and third instar Ae. aegypti larvae. The findings demonstrate that the combined application of water disinfectants yields greater efficacy in suppressing the emergence of Aedes aegypti compared to the use of the individual disinfectants alone. The silver (Ag) and copper (Cu) combination treatment (40 ppb Ag + 600 ppb Cu) showed the greatest efficacy, achieving nearly complete inhibition of emergence of the older instar larvae (98.52% [96.50, 99.47]). All treatments demonstrated high efficacy against late 1st instar Ae. aegypti larvae, with the combined copper and chlorine (Cl) treatment yielding the lowest survival rates, though individual disinfectants also produced substantial mortality. The results of this study provide critical insights to inform the design and implementation of point-of-use water treatment technologies for household water storage containers that both ensure safe drinking water and also strategically target mosquito breeding within household storage containers, thus supporting integrated vector management approaches essential for controlling neglected tropical diseases. Full article

The ion doping of hydroxyapatite (HA) has gained appeal as a chemical method of improving and adding new characteristics to materials used in biomedical engineering. Dimension, morphology, porosity, surface charge, topology, composition, and other material characteristics make doped HA more suitable for specific biomedical applications. The main aim of this review study was to highlight the role of iHA (iHA) in developing drug delivery systems, tissue engineering, implant coating, wound healing, and multimodal imaging. To the best of our knowledge, depending on the dopant, iHA can have inherent distinct mechanical, physicochemical, and biological properties that make it eligible for biomedical application. More importantly, some ions make iHA a potent antibacterial agent and drug carrier for wound healing (e.g., silver, copper, zinc), have tissue engineering capabilities, improved proangiogenic and osteoconductive properties (e.g., strontium, cobalt, nickel), drug loading capacity (e.g., magnesium, ferric, strontium), metallic implant coating properties (e.g., manganese, silver, copper), and multimodal imaging potential (e.g., terbium, ytterbium, cerium). The concentration of ions and the number of dopants played a vital role in developing new approaches based on iHA. In conclusion, iHA, compared to HA, could show better improvements in biomedical applications. Full article

Chitosan is a natural biopolymer with intrinsic antimicrobial properties and strong metal ion chelating properties, making it an ideal matrix for the development of bioactive composites. In this study, silver and copper nanoparticles were synthesized using laser ablation in liquid (LAL) by the ablation of metallic targets into commercial chitosan (Cs) and chitosan produced from Hermetia illucens pupal exuviae (CsE) solutions, avoiding the use of chemical precursors or stabilizing agents. The nanocomposites obtained were characterized by UV–vis spectroscopy, TEM microscopy and FTIR spectroscopy in order to evaluate the size of the nanoparticles and the interactions between the polymer and metal nanoparticles. Antibacterial tests demonstrated the efficacy of Ag-based composites with a minimum inhibitory concentration (MIC) of 0.006 g/L, and Cu-based composites with a MIC of 0.003 g/L against both Escherichia coli and Micrococcus flavus. While the silver composites show antibacterial activity in both colloidal and film forms, the copper composites present antibacterial activity only in colloidal form. Swelling tests indicated that all films maintained a high water absorption capacity, with a swelling index over 200%, unaffected by nanoparticle integration. The results highlight the potential of LAL-synthesized metal–chitosan composites, particularly those based on insect chitosan, as sustainable and effective antimicrobial materials for biomedical and environmental applications. Full article

Copper is essential for various biological functions, but elevated levels in water can pose serious health risks. In this work, we introduce a novel electrochemical sensor designed for the highly sensitive and selective detection of copper ions. The sensor is based on a screen-printed platinum working electrode coated with a solid-state Nafion layer. Compared to previous platinum-based sensors, this design demonstrates enhanced sensitivity, a wide linear detection range (1 µM to 10 mM), and an exceptionally low limit of detection (1 nM). It also offers a rapid response time of 3–6 s, strong selectivity, and excellent stability. Interference from common metal ions such as Cr²⁺, Zn²⁺, Mn²⁺, Pb²⁺, and Fe²⁺ was minimal, with signal deviations remaining below 2%, and performance remained consistent across varying anion concentrations, showing less than 1% deviation. The use of Nafion as a solid-state electrolyte successfully overcomes challenges typically associated with traditional silver-based reference electrodes. These characteristics make the sensor a reliable and practical tool for the rapid, on-site monitoring of water quality. Full article

Objective: Fluoride is widely recognized for its preventive role against secondary caries. This systematic review aimed to evaluate how environmental and material factors influence fluoride ion release from metal-reinforced glass ionomer cements. Methods: A structured literature search was performed in March 2025 across PubMed, Scopus, and Web of Science databases. Search terms included combinations of fluoride release AND glass ionomer AND silver OR zinc OR strontium OR copper. The study selection process followed PRISMA 2020 guidelines and was organized using the PICO framework. Out of 281 initially identified records, 153 were screened based on titles and abstracts. After applying predefined eligibility criteria, 23 studies met the inclusion requirements and were included in the qualitative analysis. Results: Among the 23 included publications, 12 involved glass ionomers modified with silver, and 6 of these reported an increase in fluoride release. Seven studies focused on zinc-modified cements, and four examined materials reinforced with strontium. Conclusions: The addition of strontium, titanium oxide, silver nanoparticles, or zirconium oxide increases the release of fluoride ions, while sintered silver reduces it. There is a great discrepancy among researchers regarding the effect of the addition of zinc oxide and its appropriate amount in the glass ionomer material. Full article

Direct-writing submicron copper circuits on glass with laser precision—without lithography, vacuum deposition, or etching—represents a transformative step in next-generation microfabrication. We present a high-resolution, maskless method for metallizing glass using ultrashort pulse Bessel beam laser processing, followed by silver ion activation and electroless copper plating. The laser-modified glass surface hosts nanoscale chemical defects that promote the in situ reduction of Ag⁺ to metallic Ag⁰ upon exposure to AgNO₃ solution. These silver seeds act as robust catalytic and adhesion sites for subsequent copper growth. Using this approach, we demonstrate circuit traces as narrow as 0.7 µm, featuring excellent uniformity and adhesion. Compared to conventional redistribution-layer (RDL) and under-bump-metallization (UBM) techniques, this process eliminates multiple lithographic and vacuum-based steps, significantly reducing process complexity and production time. The method is scalable and adaptable for applications in transparent electronics, fan-out packaging, and high-density interconnects. Full article

Metallic lithium anodes possess the lowest redox potential (−3.04 V vs. SHE) and an ultra-high theoretical capacity (3860 mAh g⁻¹, 2061 mAh cm⁻³). However, during electrochemical cycling, lithium metal tends to plate unevenly, leading to the formation of lithium dendrites. Moreover, severe electrochemical corrosion occurs at the interface between metallic lithium and traditional copper foil current collectors. To address these issues, we selected corrosion-resistant carbon paper as a lithium metal host and modified a uniform distribution of silver nanoparticles and a F-doped amorphous carbon structure as a highly lithiophilic F-CP@Ag host to enhance lithium-ion transport kinetics and achieve improved affinity with lithium metal. The silver nanoparticles reduced the lithium nucleation energy barrier, while F doping resulted in a LiF-rich solid electrolyte interphase that better accommodated volume changes in lithium metal. These two strategies worked together to ensure uniform and stable lithium metal plating/stripping on the F-CP@Ag host. Consequently, under the conditions of 1 mA cm⁻² and 1 mAh cm⁻², the symmetric cell exhibited stable cycling with a polarization voltage of 8 mV for up to 1400 h. This work highlights the corrosion problem of lithium metal on traditional copper foil current collectors and provides guidance for the long-term cycling stability of lithium metal anodes. Full article

Nanotechnology is emerging as an innovative and sustainable agricultural approach that minimizes environmental impacts by developing nanostructured materials to promote plant growth and combat plant-parasitic nematodes (PPNs). Plant-based nanoparticles (NPs) are attracting increasing attention as they are more environmentally friendly, economical and biocompatible compared to traditional chemical and physical synthesis methods. The ability of plants to reduce and stabilize metal ions and form NPs of specific size and morphology through their biochemical content offers great advantages for agricultural applications. Phytochemicals produced by plants enable the biological synthesis of metal and metal oxide NPs by acting as reducing agents and coating agents in NP synthesis. The effects of plant-based NPs in nematode control are based on mechanisms such as the disruption of the nematode cuticle, induction of oxidative stress and interference with parasite metabolism. Several plant species have been investigated for the synthesis of metal and metal oxide nanoparticles such as silver (Ag-NPs), nickel oxide (NiO-NPs), zinc oxide (ZnO-NPs), copper oxide (CuO-NPs) and iron (Fe-NPs). These biologically synthesized NPs show potent biological activity against important PPNs such as Meloidogyne spp., Pratylenchus spp. and Heterodera spp. The integration of plant-derived NPs into agricultural systems has significant potential for plant growth promotion, nematode suppression and soil health improvement. This review highlights their role in reducing environmental impact in agricultural applications by examining the sustainable synthesis processes of plant-based NPs. Full article

Background/Objectives. Chronic wounds pose a substantial global healthcare burden exacerbated by aging populations and the increasing prevalence of conditions such as diabetes, peripheral vascular disease, and venous insufficiency. Impaired physiological repair mechanisms, including angiogenesis, collagen synthesis, and re-epithelialization, hinder the healing process in chronic wounds. Many of these physiological processes are dependent on their interaction with copper. We hypothesized that the targeted delivery of copper ions to the wound bed would enhance healing. Methods. Wound dressings impregnated with copper oxide microparticles were designed to ensure the controlled release of copper ions. The efficacy of these dressings was evaluated using non-infected wound models, including diabetic mouse models compared against control and silver dressings. Outcome measures included wound closure rates, epidermal skin quality assessed by histopathological examination, and gene expression profiling. Clinical applications were assessed through diverse case studies and controlled trials involving chronic wound management. Results. Copper dressings significantly accelerated wound closure and enhanced angiogenesis compared to control and silver dressings. Histopathological analyses revealed faster granulation tissue formation, epidermal regeneration, and neovascularization. Gene expression studies showed upregulation of critical angiogenic factors such as VEGF and HIF-1α. Investigations and clinical observations corroborated improved healing across various chronic wound types, including non-infected wounds. Conclusions. Copper is essential for wound healing, and copper-impregnated dressings provide a promising solution for chronic wound management. By enhancing angiogenesis and tissue regeneration, these dressings go beyond antimicrobial action, offering a cost-effective and innovative alternative to conventional therapies. Copper dressings represent a transformative advancement in addressing the challenges of chronic wound care. Full article

Background: The skin represents the first barrier of defense, and its integrity is crucial for overall health. Skin wounds present a considerable risk seeing how their progression is rapid and sometimes they are caused by comorbidities like diabetes and venous diseases. Nutraceutical combinations like the ones between polyphenols and metal ions present considerable applications thanks to their increased bioavailability and their ability to modulate intrinsic molecular pathways. Methods: The research findings presented in this paper are based on a systematic review of the current literature with an emphasis on nanotechnology and regenerative medicine strategies that incorporate polyphenols and metallic nanoparticles (NPs). The key studies which described the action mechanisms, efficacy, and safety of these hybrid formulations were reviewed. Results: Nanocomposites of polyphenol and metal promote healing by activating signaling pathways such as PI3K/Akt and ERK1/2, which in turn improve fibroblast migration and proliferation. Nanoparticles of silver and copper have antibacterial, angiogenesis-promoting, inflammation-modulating capabilities. With their ability to induce apoptosis and restrict cell growth, these composites have the potential to cure skin malignancies in addition to facilitating wound healing. Conclusions: Nanocomposites of polyphenols and metals provide hope for the treatment of cancer and chronic wounds. Their antimicrobial capabilities, capacity to modulate inflammatory responses, and enhancement of fibroblast activity all point to their medicinal potential. Furthermore, these composites have the ability to decrease inflammation associated with tumors while simultaneously inducing cell death in cancer cells. Clarifying their mechanisms, guaranteeing stability, and enhancing effective delivery techniques for clinical usage should be the focus of future studies. Full article

Group 11 metals form with pyrazolate ligand complexes with a general formula of [MPz]_n. The value of “n” varies depending on the type of substituent in the ligand and the metal atom. Copper(I) and silver(I) ions mainly form cyclic di-, tri-, and tetra-nuclear complexes or polymeric structures. Cyclic trinuclear d¹⁰ metal pyrazolates [MPz^m]₃ (M = Cu(I) and Ag(I); Pz = substituted pyrazolate ligand) are of particular interest because their planar structure allows them to form supramolecular aggregates via noncovalent metal–metal, metal–π, and metal–electron donor interactions. Designing complexes based on these interactions has been a focus of research for the last two decades. The ability of cyclic trinuclear copper(I) and silver(I) pyrazolates to form coordination and supramolecular structures determines their properties and potential applications in catalysis, gas sensing, molecular recognition, and photoluminescence. In this review, we discuss noncovalent interactions between cyclic trinuclear silver(I) and copper(I) complexes with various types of ligands. Full article

Antimicrobial polymeric coatings rely not only on their surface functionalities but also on nanoparticles (NPs). Antimicrobial coatings gain their properties from the addition of NPs into a polymeric matrix. NPs that have been used include metal-based NPs, metal oxide NPs, carbon-based nanomaterials, and organic NPs. Copper NPs and silver NPs exhibit antibacterial and antifungal properties. So, when present in coatings, they will release metal ions with the combined effect of having bacteriostatic/bactericidal properties, preventing the growth of pathogens on surfaces covered by these nano-enhanced films. In addition, metal oxide NPs such as titanium dioxide NPs (TiO₂ NPs) and zinc oxide NPs (ZnONPs) are used as NPs in antimicrobial polymeric coatings. Under UV irradiation, these NPs show photocatalytic properties that lead to the production of reactive oxygen species (ROS) when exposed to UV radiation. After various forms of nano-carbon materials were successfully developed over the past decade, they and their derivatives from graphite/nanotubes, and composite sheets have been receiving more attention because they share an extremely large surface area, excellent mechanical strength, etc. These NPs not only show the ability to cause oxidative stress but also have the ability to release antimicrobial chemicals under control, resulting in long-lasting antibacterial action. The effectiveness and life spans of the antifouling performance of a variety of polymeric materials have been improved by adding nano-sized particles to those coatings. Full article

The rise in antimicrobial resistance (AMR) in Mycoplasma bovis underscores the urgent need for alternative treatments. This study evaluated the minimal inhibitory concentrations (MICs) of four metal ions (cobalt, copper, silver, and zinc) and colloidal silver against 15 clinical M. bovis isolates, alongside conventional antimicrobials (florfenicol, tetracycline, tulathromycin, and tylosin). Colloidal silver demonstrated the most effective antimicrobial activity, inhibiting 81.25% of isolates at 1.5 mg/L, while silver inhibited 93.7% of isolates at concentrations above 1.5 mg/L. Copper exhibited notable efficacy, inhibiting 37.5% of isolates at 1.5 mg/L, with a small proportion responding at 0.1 mg/L. Cobalt and zinc displayed variable activity, with MIC values ranging from 0.7 to 12.5 mg/L. In contrast, conventional antimicrobials showed limited effectiveness: tetracycline inhibited 31.25% of isolates at ≥16 mg/L, tylosin inhibited 25% at 16 mg/L, and tulathromycin MICs ranged from 0.5 to 8 mg/L. Time–kill assays revealed a reduction in M. bovis viability after eight hours of exposure to silver and colloidal silver, though higher concentrations (4×–8× MIC) were required for complete eradication. These findings highlight the significant potential of colloidal silver and copper as alternatives for treating M. bovis infections and combating AMR. Further research is essential to explore their standalone and synergistic applications for therapeutic use. Full article