Search Results (3,296)

The present study aims to optimize the extraction process and systematically investigate the bioactivity of polysaccharides derived from Peristrophe roxburghiana (Schult.) Brem. (CPPRs). To this end, the Box–Behnken design–response surface methodology was employed to optimize the extraction parameters of polysaccharides. The optimal extraction conditions were as follows: extraction temperature, 84 °C; extraction duration, 208 min; liquid-to-material ratio, 1:27 g/mL; extraction times, 4 times. The maximum extraction yield reached 17.89%, and the yield under non-optimal extraction conditions is 11–16%. This study systematically investigated the polysaccharides’ physicochemical, structural, and morphological properties using multiple advanced techniques (FTIR, SEM, XRD, HPLC, rheology, and TGA). CPPRs are primarily composed of arabinose, galactose and glucose as the main monosaccharides, amorphous, and capable of low-viscosity gels at low shear rates. Furthermore, CPPRs displayed notable antioxidant activity in vitro, scavenging ABTS^•+ and DPPH^• and reducing Fe³⁺ (with scavenging/reducing rates exceeding 40% at a concentration of 1 mg/mL). Meanwhile, 3 mg/mL CPPRs reduced oxidative damage of red blood cells induced by AAPH, scavenging more than 50% of ROS, and reducing the hemolysis rate by 94.5%. Additionally, CPPRs significantly promoted secretion of cytokines (including TNF-α, IL-6, and IL-10) and NO in RAW264.7 macrophages in vitro compared with the untreated control group. These findings collectively highlight the potential of CPPRs—possessing both antioxidant and immune-enhancing properties—as promising functional ingredients for application in the food and pharmaceutical industries. Full article

The discrete element model of Mactra veneriformis currently employs an oversimplified multi-sphere approach using EDEM’s Hertz–Mindlin model, assuming uniform shell–flesh mechanical properties. This study developed an advanced dual-layer flexible bonding model through comprehensive biomechanical testing. Mechanical properties and shell morphology were experimentally characterized to inform model development. Parameter optimization combined free-fall experiments with Plackett–Burman screening, steepest ascent method, and Box–Behnken RSM, yielding optimal contact parameters: flesh–flesh stiffness (X₁) = 3.64 × 10¹¹ N/m³, shell–flesh interface (X₃) = 1.48×10¹³ N/m³, shell–shell tangential stiffness (X₆) = 3.23 × 10¹² N/m³, and normal strength (X₇) = 8.35 × 10⁶ Pa. Validation showed only 4.89% deviation between simulated and actual drop tests, with hydraulic impact tests confirming excellent model accuracy. The developed model accurately predicts mechanical behavior and shell fracture patterns during harvesting operations. This research provides a validated numerical tool for optimizing clam cultivation and harvesting equipment design, offering significant potential to reduce shell damage while improving harvesting efficiency in bivalve aquaculture systems. Full article

Radioactive wastewater generated from nuclear energy, medical, and industrial sectors poses persistent ecological and health risks, necessitating the development of safe and sustainable treatment strategies. Compared with conventional physicochemical approaches, bioremediation using radiation-resistant bacteria (RRB) provides distinct advantages, including lower energy requirements, reduced secondary pollution, and superior ecological compatibility. This review synthesizes current knowledge on RRB’s biological characteristics, molecular resistance mechanisms, and applications in radioactive wastewater treatment. Moreover, potential applications in non-radioactive wastewater treatment—such as selective removal of heavy metals, degradation of refractory organics, and mitigation of antibiotic resistance—are discussed. Evidence from existing studies indicates that RRB share fundamental adaptive traits, including extraordinary radiotolerance, unique morphological modifications, and cross-tolerance to multiple stressors, which are underpinned by specialized DNA repair systems, potent antioxidant defenses, and radiation-responsive regulatory networks. These mechanisms collectively confer the ability to withstand and mitigate radiation-induced damage. Future research should responsibly prioritize the genetic engineering of RRB and its integration with complementary technologies, such as microbial fuel cells, to achieve synergistic pollutant removal and energy recovery. This synthesis provides a theoretical basis and technical reference for advancing RRB-enabled bioremediation toward sustainable wastewater management. Full article

Self-assembled nanoparticles formed with amphiphilic block or graft copolymers are being extensively studied for their use in a variety of biological and industrial applications, including targeted drug delivery. This study reports a novel strategy to tune the structure of self-assembled nanoparticles for enhancing the cellular uptake by varying the hydrophilic ratio of amphiphilic graft copolymers. We synthesized poly(aspartic acid) (PAsp) substituted with octadecyl chains (C18) at varying degrees of substitution (DS), ranging from 4.5 to 37.5 mol%, which could form self-assemblies in an aqueous solution. As the DS increased, a morphological transition was observed—from spherical assemblies (DS 4.5 and 9.1) to rod-like (DS 19.0), vesicular (DS 25.7), and lamellar-like structures (DS 37.6). Further, Trans-Activator of Transcription (TAT) as the cell penetrating peptide to the synthesized amphiphilic graft copolymers leads to an enhanced cellular uptake of the biomimetic self-assembly. In particular, the lamellar-like self-assemblies resulted in a 1.3-fold increase of cellular uptake, as compared to the spherical self-assemblies, and a 3.6-fold increase, as compared to the vesicles. Therefore, tuning the structure of poly(aspartic acid)s’ self-assemblies was proven as an effective strategy to enhance the cellular uptake, while minimizing invasive cell damage. This new strategy to tune the morphologies of self-assemblies will serve to improve the cell penetrating activity for targeted drug delivery. Full article

To investigate granulocytes under laboratory conditions, centrifugation steps are typically required for the isolation of neutrophil granulocytes from whole blood. However, only a few studies to date have addressed the direct effects of centrifugation itself on the functional state of neutrophils. This study aims to elucidate the mechanisms that contribute to the modification of granulocytes during centrifugation. We hypothesize that granules sustain morphological alterations during centrifugation, leading to the release of highly potent antimicrobial enzymes into the cytosol of the cells. Neutrophils were isolated from whole blood using different methods with and without centrifugation and analyzed by flow cytometry, ELISA, and mass spectrometry. Our findings demonstrate that intracellular granules incur damage during centrifugation, resulting in the presence of intragranular enzymes within the cytosol. Furthermore, the formation of the highly reactive hypochlorous acid (HOCl) as a consequence of centrifugation could be verified. The generation of intracellular HOCl may explain many of the alterations observed in neutrophils following centrifugation-based isolation, including modified surface antigen expression and altered responses to stimulation. In future studies, centrifugation steps during cell isolation should be avoided. The more time-consuming but gentler method of sedimentation is preferable and can be used as long as it is not necessary to obtain a highly purified neutrophil fraction. Full article

This study systematically investigates the influence of varying corrosion severity on the bearing capacity of K-shaped circular-section joints, with explicit consideration of weld line positioning. Four full-scale circular-section joint specimens with clearance gaps were designed to simulate localized corrosion through artificially introduced perforations, and axial static loading tests were performed to assess the degradation of structural performance. Experimental results indicate that the predominant failure mode of corroded K-joints manifests as brittle fracture in the weld-affected zone, attributable to the combined effects of material weakening and stress concentration. The enlargement of corrosion pit dimensions induces progressive deterioration in joint stiffness and ultimate bearing capacity, accompanied by increased displacement at failure. A refined finite element model was established using ABAQUS. The obtained load–displacement curve from the simulation was compared with the experimental data to verify the validity of the model. Subsequently, a parametric analysis was conducted to investigate the influence of multiple variables on the residual bearing capacity of the nodes. Numerical investigations indicate that the severity of corrosion exhibits a positive correlation with the reduction in bearing capacity, whereas web-chord members with smaller inclination angles demonstrate enhanced corrosion resistance, when θ is equal to 30 degrees, K_s decreases from approximately 0.983 to around 0.894. Thin-walled joints exhibit accelerated performance deterioration compared to thick-walled configurations under equivalent corrosion conditions. Furthermore, increased pipe diameter ratios exacerbate corrosion-induced reductions in structural efficiency, when the corrosion rate is 0.10, β = 0.4 corresponds to K_s = 0.98, and when β = 0.7, it is approximately 0.965. and distributed micro-pitting results in less severe capacity degradation than concentrated macro-pitting over the same corrosion areas. Full article

Cylindrospermopsis raciborskii is a toxin-producing cyanobacterium that is easy to overlook. It has strong environmental adaptability and is currently spreading around the world and gradually dominating to form a persistent bloom, causing ecological and environmental risks and drinking water safety issues. In this study, we systematically investigated the inhibitory effects of oleic acid on C. raciborskii and elucidated the underlying mechanisms through morphological observation, physiological assays, and bioinformatics analysis. Our results demonstrated that oleic acid strongly inhibits the growth of C. raciborskii, with a 72 h half-maximal effective concentration (EC₅₀) of 0.903 mg·L⁻¹. At 1.6 mg·L⁻¹, oleic acid achieved an inhibition rate of 99.5% within 48 h, indicating rapid suppression of cyanobacterial growth. Physiological analyses revealed that oleic acid severely impaired photosynthetic activity, as evidenced by significant reductions in key parameters (rETRmax, α, Fv/Fm, and Fv/Fo) and altered photosynthetic pigment composition, suggesting structural and functional damage to the photosynthetic apparatus. Morphological observations further showed that oleic acid disrupted filament integrity, inducing cell shrinkage, cytoplasmic vacuolation, cell wall detachment, membrane rupture, and eventual cellular disintegration. Kyoto Encyclopedia of Genes and Genomes pathway enrichment analysis indicated that oleic acid interferes with multiple metabolic processes, including nutrient and cofactor synthesis, membrane transport, and signal transduction, ultimately triggering algal cell death. This study highlights oleic acid as a promising eco-friendly agent for mitigating C. raciborskii blooms, offering potential applications in ecological prevention and emergency bloom control. Full article

To address the issue of cracking damage under extreme high-temperature rutting, which is not sufficiently considered in the selection of preventive maintenance programs, the objective of this study was to investigate the preventive maintenance-oriented minor internal damage changes in asphalt concrete with a normal maximum aggregate size of 16 mm (AC-16) under extreme high temperature (70 °C) and load (1.4 MPa) conditions. The changes in void structure within the 0–10 mm rutting depth were tracked through the rutting test and Computer Tomography (CT) image analysis. It was observed that there were notable discrepancies in the three-dimensional (3D) space distribution of void, void volume development, and void morphology between the rut impact zones and the rutted part. The impact zone exhibited a greater prevalence of voids and an earlier onset of cracking. At a rutting depth of only 5 mm, multiple top-down developed cracks (TDCs) of over 6 mm length were observed in the impact zone. At a rutting depth of 10 mm, the TDCs in the impact zone were more numerous, larger, and wider, indicating the necessity for a tailored repair program that includes milling. TDC damage caused by high-temperature rutting is predominantly observed in the upper and middle positions of the height direction, with the bottom position data exhibiting greater inconsistency due to the influence of molding. Furthermore, the combination of void morphology indicators with void volume can effectively track the occurrence and development of microcracks. However, the fine-scale assessment of compaction degree and deformation process using the equivalent void diameter indicator is not sufficiently differentiated. Full article

Background: Ulcerative colitis (UC) is an autoimmune disorder characterized by inflammation of the mucosa that gives rise to a disrupted epithelial morphology. Persistent or recurrent inflammation and the debilitating nature of the associated symptoms make treatment of UC challenging. Cannabinoids derived from Cannabis sativa L. have been used for treatment of gastrointestinal disorders due to the wide-ranging therapeutic benefits of these compounds. Methods: We evaluated a commercial hemp extract, high in cannabigerol (CBG) and cannabidiol (CBD), as a novel treatment for UC symptoms using the dextran sodium sulfate (DSS) model in mice. Hemp extract was administered via two different routes of administration, intraperitoneal (i.p) and oral (p.o). Results: Specifically, we observed that cannabinoid treatment reduced damage to the colonic epithelium. We also observed that CBG/CBD rich hemp extracts help reduce pain-related responses in these animals. Conclusions: Together, the data suggest that cannabinoid administration has the potential to be an effective alternate therapeutic option for UC management. Full article

The precise identification, classification, sorting, and rapid and accurate quality assessment of soybean seeds are extremely important in terms of the continuity of agricultural production, varietal purity, seed processing, protein extraction, and food safety. Currently, commonly used methods for the identification and quality assessment of soybean seeds include morphological analysis, chemical analysis, protein electrophoresis, liquid chromatography, spectral analysis, and image analysis. The use of image analysis and artificial intelligence is the aim of the presented research, in which a method for the automatic classification of soybean varieties, the assessment of the degree of damage, and the identification of geometric features of soybean seeds based on numerical models obtained using a 3D scanner has been proposed. Unlike traditional two-dimensional images, which only represent height and width, 3D imaging adds a third dimension, allowing for a more realistic representation of the shape of the seeds. The research was conducted on soybean seeds with a moisture content of 13%, and the seeds were stored in a room with a temperature of 20–23 °C and air humidity of 60%. Individual soybean seeds were scanned to create 3D models, allowing for the measurement of their geometric parameters, assessment of texture, evaluation of damage, and identification of characteristic varietal features. The developed 3D-CNN network model comprised an architecture consisting of an input layer, three hidden layers, and one output layer with a single neuron. The aim of the conducted research is to design a new, three-dimensional 3D-CNN architecture, the main task of which is the classification of soybean seeds. For the purposes of network analysis and testing, 22 input criteria were defined, with a hierarchy of their importance. The training, testing, and validation database of the SB3D-NET network consisted of 3D models obtained as a result of scanning individual soybean seeds, 100 for each variety. The accuracy of the training process of the proposed SB3D-NET model for the qualitative classification of 3D models of soybean seeds, based on the adopted criteria, was 95.54%, and the accuracy of its validation was 90.74%. The relative loss value during the training process of the SB3D-NET model was 18.53%, and during its validation process, it was 37.76%. The proposed SB3D-NET neural network model for all twenty-two criteria achieves values of global error (GE) of prediction and classification of seeds at the level of 0.0992. Full article

Worker honey bees are crucial for colony stability and ecosystem pollination. However, the cross-scale aging features and underlying mechanisms in the Eastern honey bee (Apis cerana) remain poorly understood. This study systematically investigated age-related changes in A. cerana workers across youth (1~5 days post-emergence, dpe), middle age (29 dpe), and old age (50 dpe) through integrated morphological, ultrastructural, and transcriptomic analyses. With increasing age, the phenotypic deterioration in the old bees (OBs) was significant: the body color brightness decreased by 16.7% compared to the young bees (YBs) (p < 0.001), and the hair density of the head, thorax, and abdomen declined by 63.5%, 97.2%, and 91.5%, respectively (p < 0.0001). The wing wear index (WWI) increased to 96.7% (p < 0.0001). The locomotor performance declined sharply, with only 6.7% of the OBs successfully reaching the feeding platform within 15 s (p < 0.0001). Ultrastructural analysis revealed sensory organ abrasion, flattened thoracic bristles, thickened cuticle, and 90.4% increased mitochondrial damage (p < 0.0001). The autophagosomes showed dynamic changes, with 81.8% reduction versus those of mid-aged bees (MBs) (p < 0.001), which suggests that mitochondrial dysfunction and autophagy dysregulation may be the core driving factors behind aging. Transcriptomics identified 67 differentially expressed genes enriched in lifespan regulation, glutathione metabolism, and lysosomal pathways. Fifteen key aging-related genes were identified, such as major royal jelly protein 3 (MRJP3), synaptic vesicle glycoprotein 2A (SV2A), and apidermin 3 (APD3), whose expression dynamics have been shown to be closely related to nutritional metabolism, behavioral perception, and the decline of epidermal barrier function. This work establishes the first multidimensional aging evaluation system for A. cerana, providing critical insights into bee senescence mechanisms and colony health optimization. Full article

This work successfully achieved pre-intercalation of Fe species in V2CTx MXene through an annealing method. The crystallographic structure, microscopic morphology, and functional groups of the samples before and after pre-intercalation were analyzed by XRD, SEM, and FTIR, and the electrochemical performance of MXene electrodes was studied. Research has shown that the interlayer spacing of pre-intercalated MXene increases with an increase in annealing temperature. The interlayer spacing of MXene annealed at 800 °C is 13.1% higher than that of the original MXene. However, the morphology of the samples was damaged by excessively high annealing temperatures, which also weakened the lithium-ion storage performance. In contrast, the cycling performance of MXene electrodes annealed at 400 °C showed the greatest improvement, reaching 71.65%. This is because iron species, acting as a pillar support structure, expand the interlayer spacing and broaden the transport channels for lithium ions. Meanwhile, high-temperature annealing generates more oxygen-containing functional groups, which provide additional active sites for lithium-ion transport, promote the kinetics of electrode reactions, and thus enhance its lithium-ion storage performance. Full article

Waste drilling fluids represent a complex gel–colloidal system containing structurally stable polymeric networks and heavy-metal ions that can cause tremendous damage to the ecosystem. The current disposal methods, like solidification/landfills, formation reinjection, and chemical treatment, commonly suffer from high secondary pollution risks, poor resource recovery, and incomplete detoxification. This paper developed a photocatalytic approach to complex gel system treatment by hydrothermally synthesizing a novel sulfur-doped, oxygen-vacancy-modified 3D flower-like xS-BiOBr₀.₅Cl₀.₅ structure which effectively narrowed the bandgap of BiOX and thus significantly enhanced its catalytic activity. The chemical composition, morphology, specific surface areas, and bandgaps of the materials were characterized. The photocatalytic performance and cyclic stability of the materials were measured, and 0.5S-BiOBr_0.5Cl_0.5 showed the best photocatalytic performance. The rhodamine B(RhB) degradation and polymer degradation efficiencies of 0.5S-BiOBr_0.5Cl_0.5 were up to 91% and 79%, respectively, while the Hg(II), Cr(VI), and Cr(III) reduction efficiencies of the material were up to 48.10%, 96.58%, and 96.41%, respectively. The photocatalytic mechanism of the xS-BiOBr_0.5Cl_0.5 materials was evaluated through an oxygen vacancy analysis, active species capture experiments, and density functional theory (DFT) computations. Overall, the xS-BiOBr_0.5Cl_0.5 materials can provide a low-cost and harmless treatment method for waste drilling fluids and promote the “green” development of oil and gas. Full article

To investigate the damage degradation of recycled concrete under mesoscale morphology and the critical expansion force of concrete cracking following sulfate wet–dry cycles, an experimental sulfate wet–dry cycle was designed. In situ scanning of recycled concrete was conducted using X-ray computed tomography (CT). Analysis of the CT images revealed the relationship between the gray scale changes and the sulfate salt wet–dry cycle, along with pore alterations and crack propagation in recycled concrete. A CT image analysis method based on grayscale inversion for crack propagation was developed. By integrating sulfate attack with fracture mechanics, this study explored the phenomenon of pore expansion in recycled concrete subjected to dry–wet cycling tests. The concrete fracture criterion provided the basis for determining the critical expansion force of recycled concrete after the wet–dry cycles. Results indicated that as the duration of sulfate wet–dry cycles increased, the gray scale first increased and then decreased. On the 40th day of the cycling test, the average grayscale value increased by 10.4%. The number of pores in recycled concrete continuously decreased, pore size diminished, and cracks appeared on the specimen’s weak surface. The use of gray scale changes to reveal the degradation of recycled concrete after sulfate wet–dry cycles proved to be both feasible and effective. As the length of the interface crack increased, the stress intensity factor at the crack tip also increased, while the critical expansion force decreased. Additionally, as the pore diameter increased, the stress intensity factor at the crack tip rose. The critical expansion force of a symmetric crack at the edge of a pore was 53 times greater than that of a single crack. Full article

In recent years, high temperature and drought have severely impacted the growth and development of loquat [Eriobotrya japonica (Thunb.) Lindl.] plants. Although dopamine can improve the stress resistance of plants, its role in combined stress requires further exploration. This study investigated the alleviative effect and mechanism of exogenous dopamine on loquat seedlings subjected to the combined stress of high temperature and drought. The combined stress significantly reduced root viability, photosynthetic pigment content, and net photosynthetic rate (Pn) while markedly increasing reactive oxygen species (ROS) levels, thiobarbituric acid-reactive substances (TBARS) content, and electrolyte leakage (EL). The seedlings exhibited pronounced wilting symptoms, along with markedly reduced root surface area and volume. Dopamine treatment significantly alleviated combined stress-induced damage. This mitigation was manifested through substantially enhanced root viability, photosynthetic pigment content, Pn, antioxidant enzyme activities, and osmotic adjustment substances concomitantly with marked reductions in ROS, TBARS content, and EL. Dopamine significantly reduced seedling wilting severity and improved root morphological parameters. This study demonstrates that dopamine enhances loquat seedlings’ tolerance to combined stress through coordinated mechanisms: maintaining photosynthetic pigments and improving stomatal conductance to sustain photosynthetic efficiency, enhancing antioxidant enzyme activity and ROS scavenging capacity to mitigate oxidative damage, and promoting osmotic solute accumulation for osmotic potential regulation. Full article