Search Results (281)

The ion doping of hydroxyapatite (HA) has gained appeal as a chemical method of improving and adding new characteristics to materials used in biomedical engineering. Dimension, morphology, porosity, surface charge, topology, composition, and other material characteristics make doped HA more suitable for specific biomedical applications. The main aim of this review study was to highlight the role of iHA (iHA) in developing drug delivery systems, tissue engineering, implant coating, wound healing, and multimodal imaging. To the best of our knowledge, depending on the dopant, iHA can have inherent distinct mechanical, physicochemical, and biological properties that make it eligible for biomedical application. More importantly, some ions make iHA a potent antibacterial agent and drug carrier for wound healing (e.g., silver, copper, zinc), have tissue engineering capabilities, improved proangiogenic and osteoconductive properties (e.g., strontium, cobalt, nickel), drug loading capacity (e.g., magnesium, ferric, strontium), metallic implant coating properties (e.g., manganese, silver, copper), and multimodal imaging potential (e.g., terbium, ytterbium, cerium). The concentration of ions and the number of dopants played a vital role in developing new approaches based on iHA. In conclusion, iHA, compared to HA, could show better improvements in biomedical applications. Full article

Small interfering RNAs (siRNAs) are particularly attractive among the frontier drugs due to their high specificity of action, activity on disease-inducing genes, and small molecular weight, thus being one of the most studied agents for gene therapy. However, siRNAs are prone to fast enzymatic degradation in the bloodstream, as well as other limitations that challenge their clinical translation. Nanoparticle (NP) delivery of siRNA has been proposed as a potential solution, overcoming their intrinsic limitations. In this regard, the siRNA delivery by magnetic nanoparticles is of particular interest because, being susceptible to external magnetic fields, it may be guided remotely, maximizing transfection efficiency and minimizing side effects. In addition, magnetic NPs would also allow a theranostic combination of drug delivery, magnetic resonance imaging, and hyperthermia. In this work we have studied the uptake of a model therapeutic siRNA by iron-doped hydroxyapatite nanoparticles (FeHA NPs), which are known to have excellent biocompatibility and magnetic susceptibility. We discovered that FeHA NPs stabilized by citrate (Cit-FeHA NPs) uptake siRNA by adsorption quickly and with high efficiency (ca. 90%) without altering nanoparticles physicochemical properties or colloidal stability. SiRNA-loaded Cit-FeHA NPs are able to slowly release their payload, with a sustained release of 45 days without siRNA degradation. Our work is therefore the preliminary validation of the suitability of FeHA NPs for magnetically guided delivery of therapeutic siRNAs. Full article

One of the main challenges in hydroxyapatite research is to develop cost-effective synthesis methods that consistently produce materials closely resembling natural bone, while maintaining high biocompatibility, phase purity, and mechanical stability for biomedical applications. Traditional synthetic techniques frequently fail to provide desirable mechanical characteristics and antibacterial activity, necessitating the development of novel strategies based on natural precursors and selective ion doping. The present study aims to explore the possibility of synthesizing hydroxyapatite through the co-precipitation method, followed by a microwave-assisted hydrothermal maturation process. The main CaO sources selected for this study are eggshells and mussel shells. Cu²⁺ and Sr²⁺ ions were added into the hydroxyapatite structure at concentrations of 1% and 5% to investigate their potential for biomedical applications. Furthermore, the morpho-structural and biological properties have been investigated. Results demonstrated the success of hydroxyapatite synthesis and ion incorporation into its chemical structure. Moreover, HAp samples exhibited significant antimicrobial properties, especially the samples doped with 5% Cu and Sr. Additionally, all samples presented good biological activity on MC3T3-E1 osteoblast cells, demonstrating good cellular viability of all samples. Therefore, by correlating the results, it could be concluded that the undoped and doped hydroxyapatite samples are suitable biomaterials to be further applied in orthopedic applications. Full article

Background/Objectives:Titanium implant surface modifications enhance osseointegration and prevent microbial colonization, improving implant longevity. Antimicrobial coatings, particularly cerium- and bismuth-doped hydroxyapatite (CeHAp and BiHAp), have gained attention for reducing infection-related complications. This study evaluates the antimicrobial activity of CeHAp and BiHAp coatings on CpTi compared to untreated CpTi in artificial saliva at pH levels of 4.5, 6.5, and 8. Methods: Antibacterial efficacy against Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), and Candida albicans (C. albicans) was assessed using the broth dilution method. Titanium rods coated with test compounds were incubated in inoculated nutrient broth, and microbial inhibition was determined via optical density at 600 nm. A statistical analysis was performed using the Kruskal–Wallis ANOVA test, the median and Interquartile Range were determined for the variables, and a Dwass–Steel–Critchlow–Fligner intergroup pairwise comparison was conducted. Results: The results showed that both the CeHAp and BiHAp coatings demonstrated significant antimicrobial activity against S. aureus (OD = 0.01) at pH 6.5, which was more pronounced than the activity observed against E. coli (OD = 0.05), with the difference being statistically significant (p = 0.001). The least antimicrobial activity was observed against C. albicans (0.21) at pH 8 (p = 0.001). Conclusion: These findings highlight the pH-dependent effectiveness of BiHAp and CeHAp coatings in inhibiting microbial growth. Their application on titanium implants may enhance antimicrobial properties, contributing to improved dental implant success and broader biomedical applications. Full article

To address the biological inertness of pure titanium implants, a composite coating with a strontium-doped hydroxyapatite (Sr-HA) phase and H₂Ti₅O₁₁·H₂O nanorods was engineered via ultrasonic-assisted micro-arc oxidation (UMAO) with hydrothermal treatment (HT). The ultrasonic field was applied to modulate the MAO discharge behavior, enhancing ion transport and coating formation. Structural characterization revealed that UMAO-HT coatings exhibited a lower anatase/rutile ratio and higher Sr-HA crystallinity, as compared to MAO-HT. In vitro simulated body immersion studies showed that UMAO-HT induced rapid apatite formation within 24 h, with a better apatite-inducing ability than the conventional MAO-HT. Density functional theory (DFT) simulations demonstrated that Sr substitution in HA lowered the (001) surface work function, enhancing Ca²⁺ adsorption energy and promoting apatite phase nucleation. This work reported the synergistic effects of ultrasonic-induced microstructure optimization and Sr-HA higher bioactivity, providing a mechanistic framework for designing next-generation bioactive coatings with enhanced osseointegration potential. Full article

Implant-associated infections, particularly those linked to Staphylococcus aureus (S. aureus), continue to compromise the clinical success of β-tricalcium phosphate (β-TCP) implants despite their excellent biocompatibility and osteoconductivity. This investigation aims to tackle these challenges by integrating femtosecond (fs)-laser surface processing with two complementary strategies: ion doping and functionalization with green-synthesized silver nanoparticles (AgNPs). AgNPs were produced via fs-laser photoreduction using green tea leaf extract (GTLE), noted for its anti-inflammatory and antioxidant properties. Fs-laser processing was applied to modify β-TCP scaffolds by systematically varying scanning velocities, fluences, and patterns. Lower scanning velocities generated organized nanostructures with enhanced roughness and wettability, as confirmed by scanning electron microscopy (SEM), optical profilometry, and contact angle measurements, whereas higher laser energies induced significant phase transitions between hydroxyapatite (HA) and α-tricalcium phosphate (α-TCP), as revealed by X-ray diffraction (XRD). AgNP-functionalized scaffolds demonstrated markedly superior antibacterial activity against S. aureus compared to the ion-doped variants, attributed to the synergistic interplay of nanostructure-mediated surface disruption and AgNP-induced bactericidal mechanisms. Although ion-doped scaffolds exhibited limited direct antibacterial effects, they showed concentration-dependent activity in indirect assays, likely due to controlled ion release. Both strategies promoted osteogenic differentiation of human bone marrow mesenchymal stem cells (hBM-MSCs) under defined conditions, albeit with transient cytotoxicity at higher fluences and excessive ion doping. Overall, this approach holds promise for markedly improving antibacterial efficacy and osteogenic compatibility, potentially transforming bone regeneration therapies. Full article

Extensive bone loss represents a great challenge for orthopedic and reconstructive surgery. On an in vivo rabbit model, the healing of two bone defects on a long bone, tibia, was studied. A polybutylene succinate (PBS) microfibrillar scaffold was implemented with BMP-2 protein and hydroxyapatite (HA) as potential osteogenic factors. The present study was carried out on 6 male New Zealand white (4–6 months old) rabbits in vivo model. One bone defect was created in each subject on the tibia. The controls were left to heal spontaneously while the study samples were treated with the polybutylene succinate (PBS) microfibrillar scaffolds doped with BMP-2 and HA. Histological and immunohistochemical analyses were performed after euthanasia at 3 and 6 months. The bone defect treated with the BMP-2 PBS scaffold shows, from 3 months, a significantly increased presence of activated osteoblasts with mineralized bone tissue deposition. This study confirms the great potential of PBS scaffolds in the clinical treatment of bone defects. Full article

A spin-coating technique was used to produce new thin films of fluoride-doped hydroxyapatite (HApF) and fluoride-doped hydroxyapatite in a dextran matrix (HApF-Dx) with the potential to be used as nanocoatings for various biomedical implants. The stability of the suspensions used in obtaining the thin films was confirmed by ultrasonic measurements with double-distilled water as a reference. The HApF and HApF-Dx thin films obtained by spin-coating showed diffraction patterns corresponding to hexagonal hydroxyapatite. The X-ray photoelectron spectroscopy studies confirmed the partial substitution of hydroxyl groups (-OH) by fluoride ions. The FTIR studies were conducted in order to highlight the presence of the functional group specific for the HAp in the samples and the influence of the dextran addition on the vibrational characteristics. The surface morphologies of the HApF and HApF-Dx thin films were explored using scanning electron microscopy (SEM), atomic force microscopy (AFM), and metallographic microscopy (MM). The surfaces of the HApF and HApF-Dx thin films were found to be smooth, homogenous, and nanostructured. The biocompatibility assays on HGF-1 cells confirmed that both coatings exhibited good cell viability for all the tested time intervals (24 and 48 h). The findings highlighted the potential of HApF and HApF-Dx coatings for biomedical applications. Additional information about the HGF-1 adherence and development on the surface of the HApF and HApF-Dx coatings was obtained using metallographic microscopy, scanning electron microscopy, and atomic force microscopy techniques. This research demonstrates that the spin-coating method can be successfully used to fabricate HApF and HApF-Dx nanocoatings for potential biomedical applications. Full article

In this study, two biochar composites, namely hydroxyapatite/mulberry stem biochar (HMp) and magnesium-doped HMp (Mg0.1-HMp), were prepared using mulberry stem as the major raw material using the sol–gel process. Characterization and batch experiments were carried out on HMp and Mg0.1-HMp to investigate the Pb(II) adsorption mechanism and the factors affecting the adsorption, respectively. The results indicated that carboxylic compounds, phenols, and carbonyl functional groups were formed on the surfaces of HMp and Mg0.1-HMp. At an optimal pH of 5, an adsorption period of 6 h was achieved at an initial Pb(II) concentration of 100 mg/L and adsorbent quantity of 2 g/L. The maximum Pb(II) adsorption capacities of the HMp and Mg0.1-HMp were 303.03 and 312.50 mg/g, respectively, at 25 °C. The maximum Pb(II) adsorption capacity of Mg0.1-HMp was 2.55 times more than that of mulberry stem biochar (MBC). The adsorption of Pb(II) by HMp and Mg0.1-HMp is consistent with the Langmuir isotherm and pseudo-second-order kinetic models, demonstrating a spontaneous, endothermic, and irreversible process dominated by monolayer chemical adsorption. These results show that the mechanisms of Pb(II) by Mg0.1-HMp mainly involved electrostatic interaction, complexation, precipitation, and ion exchange. Full article

Background/Objectives: In this paper, we report the development of the first chrome-doped hydroxyapatite in a poly (vinyl alcohol) (PVA) matrix enriched with amoxicillin for biomedical applications. The development of chromium-doped hydroxyapatite coatings in a PVA matrix enriched with amoxicillin aims to provide new biomaterials with improved physico-chemical and biological properties, making them promising candidates for biomedical applications. Methods: Through ultrasound studies, we obtained valuable information on the stability of the samples. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, metallographic microscopy (MM), and atomic force microscopy (AFM) were employed for the characterization of the samples. The biocompatibility of the CrHApAPV and CrHApAPV-Ax coatings was assessed using the MG63 human osteoblast-like cell line. To evaluate the cytotoxic potential of these coatings, the cell viability was quantified using the MTT assay after 24 h of incubation. The antibacterial activity of the coatings was evaluated with the aid of the reference strain Pseudomonas aeruginosa ATCC 27853 (P. aeruginosa). Results: The XRD patterns of CrHApAPV and CrHApAPV-Ax samples were examined to evaluate the effects of PVA and amoxicillin on the lattice parameters, unit cell volume, and average crystallite sizes. The results of the in vitro antibacterial assay demonstrated that both the CrHApAPV and CrHApAPV-Ax coatings exhibited very good antibacterial properties for all the tested time intervals. Conclusions: Our results underline the stability of the analyzed samples. Moreover, our physico-chemical and biological studies highlight that CrHApAPV and CrHApAPV-Ax coatings could be considered promising materials for biomedical uses. Full article

Hydroxyapatite nanowires (HAW) can effectively improve the bone repair ability in bone engineered tissue. However, due to their single function, the application of HAWs in biological tissue engineering materials is limited. In this study, strontium-doped hydroxyapatite nanowires (SrHAW) were synthesized by a hydrothermal method and coated with polydopamine (PDA) to improve the function of HAWs. The material structure, biocompatibility evaluation, and differentiation capability testing of PDA-coated strontium-doped hydroxyapatite (SrHAW@PDA) nanowires were conducted. Then, the nanowires were co-cultured with rat bone marrow mesenchymal stem cells (BMSCs) and rat umbilical vein endothelial cells (UVECs) to prepare cell spheroids. Compared with the undoped and uncoated HAW, the SrHAW@PDA nanowires enhanced the cell activity and their angiogenesis and osteogenesis abilities. In addition, their performance in the three-dimensional spheroid also played a positive role in the cells in the spheroid. Due to the presence of PDA, the adhesion between the cells in the three-dimensional spheroid and the nanowires were enhanced. In summary, these results show that SrHAW@PDA has the potential to be used as an alternative material to regulate cell biological activity in three-dimensional cell spheroids. Full article

The present work investigates the rheological behavior of ceramic slurries made of hydroxyapatite powders doped with magnesium and strontium ions and selected as particularly relevant for biomedical applications. The incorporation of doping ions into the apatite crystal structure is a well-known way to enhance the bioactivity of hydroxyapatite through compositional and structural changes, however, this also affects the rheological properties relevant to the fabrication of ceramic devices by forming techniques based on the manipulation of aqueous slurries. We analyzed the effect of different apatitic chemical compositions, powder content, and dispersant amount on the shear behavior and flowability of slurries, thus finding that the structural changes in hydroxyapatite induced by ion doping significantly affected the colloidal stability of the apatite powders and the viscoelasticity of the slurries. This leads to improved rheological behavior in the hydroxyapatite suspensions, which is suitable for the future development of ceramic slurries, particularly for achieving novel ceramic devices by extrusion-based techniques. Full article

Biological hydroxyapatite (BHA) has been extensively employed in alveolar socket preservation, yet its clinical application is often compromised by delayed bone healing triggered by macrophage-mediated pro-inflammatory responses. Building upon our previous work, in which we successfully incorporated fluorine into BHA to develop fluorinated biogenic hydroxyapatite (FBHA) with superior physicochemical and biological properties, this study systematically investigated the effects of fluorine doping on macrophage-mediated osteoimmunomodulation and socket bone healing. The synthesized FBHA was characterized using SEM, EDS, and fluoride ion release assays to confirm fluorine incorporation. In macrophage co-culture models, FBHA demonstrated significant advantages over BHA, effectively suppressing iNOS and TNFα gene expression, reducing NO release, and inhibiting phagocytic activity in M1 macrophages. RNAseq analysis revealed that the M1 phenotype suppression might be mediated through enhanced cellular antioxidant activity. Moreover, in macrophage-conditioned microenvironments, FBHA significantly upregulated osteogenic gene expression and ALP activity of pre-osteoblasts. In vivo experiments demonstrated FBHA’s superior performance in alveolar ridge preservation, especially in new bone formation and mineralization inside sockets. Fluorine doping significantly boosted socket bone healing via suppressing the inflammatory response of macrophages and enhancing osteogenic differentiation of pre-osteoblasts. These findings provide valuable insights into the development of next-generation biomaterials for alveolar socket preservation. Full article

Osteochondral defects, involving both articular cartilage and subchondral bone, pose significant challenges to joint function and health due to the lack of spontaneous healing and the risk of long-term degenerative diseases like osteoarthritis. Biomaterials have emerged as important components in the development of scaffolds, providing structural support that facilitates tissue growth, integration, and regeneration. This study aims to demonstrate the effectiveness of a tomographic assessment method for optimizing the evaluation of osteochondral regeneration, particularly using Hounsfield units, to enable the evaluation of scaffold integration and tissue regeneration. The sheep model was selected as a model study. Two distinct configurations of biomaterials were utilized in this study: Honey (HMG—Mg doped hydroxyapatite; HWS—wollastonite–hydroxyapatite) and Bi-layer (BWS—wollastonite–hydroxyapatite). The HMG scaffold demonstrated superior integration, reparative tissue quality, and regeneration potential compared to the HWS, BWS, and CTRL groups. The findings underscore the significance of CT assessment as a preliminary method for evaluating hard tissue, such as bone, employing Hounsfield units. Statistical evaluations validated the significant differences in performance, particularly favoring the HMG group. The results of this study underscore the importance of tomographic assessment in evaluation of osteochondral regeneration. Full article

Bacterial resistance and the demand for novel antibacterial strategies represent major challenges in contemporary medicine. In this study, zinc-doped hydroxyapatite (Zn-HA) samples with 3, 5, and 10 wt% Zn(II) were synthesized using wet precipitation synthesis and sintered at 700 and 800 °C. The samples were characterized by X-ray Diffraction, Fourier Transform Infrared Spectroscopy, Raman Spectroscopy, and Scanning Electron Microscopy. The antimicrobial properties of the Zn-HA were tested against four bacterial strains—Staphylococcus aureus, Enterococcus faecalis, Salmonella typhimurium, Escherichia coli—and the fungus Candida albicans. Both 5 wt% and 10 wt% Zn-HA effectively inhibited the growth of all microorganisms. Notably, 10wt% Zn-HA exhibited the best results, with inhibition rates of 50.2% against S. aureus, 36.5% against E. faecalis, 47.5% against P. aeruginosa, 31.8% against E. coli, and 24.7% against C. albicans. There were no significant differences in the growth of adipose mesenchymal stem cells between the prepared samples and the control. For osteogenic differentiation, dye uptake was 1.2 times higher for HA and 5 wt% Zn-HA, and 1.3 times higher for 3 wt% Zn-HA compared to the control. These results suggest that developed ceramics may be effective in regenerative medicine, paving the way for innovative treatments. Full article