Search Results (62)

Xiamen, a rapidly developing coastal metropolis and tourist hub in southeastern China, faces air quality challenges due to its dense population and tourism reliance. This study investigates PM_2.5 sources and temporal variations during autumn 2013–2017 via chemical characterization, mass reconstruction, and receptor modeling. The Positive Matrix Factorization (PMF) model identified five sources: secondary sulfate (31%), coal/vehicle emissions (28%), industrial emissions with secondary organic aerosols (SOA, 20%), ship emissions (14%), and fugitive dust (7%). Interannual variations in source contributions highlighted impacts of anthropogenic activities, meteorology, power plant upgrades, and stricter vehicle standards. PM_2.5 declined 19% (2013–2017), driven by emission controls, while SOA surged 42% (2015–2017) due to VOC oxidation and lower temperatures. Backward trajectory and Potential Source Contribution Function (PSCF) analyses revealed significant regional transport from northern industrial zones (32% contribution) and maritime activities. Ship emissions, which have remained relatively stable over the years, underscore the need for stricter marine regulations. Fugitive dust peaked in 2015 (25.8% of PM_2.5), linked to urban construction. The findings emphasize the interplay of local emissions and regional transport in shaping PM_2.5 pollution, providing a scientific basis for targeted control strategies in coastal cities with similar socioeconomic and geographic contexts. Full article

Carbonaceous aerosols exert significant impacts on human health and climate systems. This study investigates the seasonal variations of carbonaceous components in fine particulate matter (PM_2.5) in Qinhuangdao, a coastal city in northern China, throughout 2023. The mass concentrations of organic carbon (OC) and elemental carbon (EC) averaged 9.44 ± 4.57 μg m⁻³ and 0.84 ± 0.33 μg m⁻³, contributing 26.49 ± 8.74% and 2.81 ± 1.56% to total PM_2.5, respectively. OC exhibited a distinct seasonal trend: winter (12.02 μg m⁻³) > spring (11.96 μg m⁻³) > autumn (8.15 μg m⁻³) > summer (5.71 μg m⁻³), whereas EC followed winter (1.31 μg m⁻³) > autumn (0.73 μg m⁻³) > spring (0.70 μg m⁻³) > summer (0.63 μg m⁻³). Both OC and EC levels were elevated at night compared to daytime. Secondary organic carbon (SOC), estimated via the EC-tractor method, constituted 37.94 ± 14.26% of total OC. A positive correlation between SOC/OC ratios and PM_2.5 concentrations suggests that SOC formation critically influences haze events. In autumn and winter, SOC formation was higher at night, likely driven by aqueous-phase reactions, whereas in summer SOC formation was more pronounced during the day, likely due to enhanced photochemical reactions. Source apportionment analysis revealed that gasoline and diesel vehicles were major contributors to carbonaceous aerosols, accounting for 27.35–29.06% and 14.97–31.83%, respectively. Coal combustion contributed less (10.51–21.55%), potentially due to strict regulations prohibiting raw coal use for domestic heating in surrounding regions. Additionally, fugitive dust was found to have a high contribution to carbonaceous aerosols during spring and summer. Full article

Soil fugitive dust (SFD) emissions pose a significant threat to both human health and the environment, highlighting the need for accurate and reliable estimation and assessment in the desert regions of northwest China. This study used climate, soil, and vegetation data from Bayingolin Prefecture (2001–2022) and applied the WEQ model to analyze temporal and spatial variations in total suspended particulate (TSP), PM₁₀, and PM_2.5 emissions and their driving factors. The region exhibited high emission factors for TSP, PM₁₀, and PM_2.5, averaging 55.46 t km⁻² a⁻¹, 27.73 t km⁻² a⁻¹, and 4.14 t km⁻² a⁻¹, respectively, with pronounced spatial heterogeneity and the highest values observed in Yuli, Qiemo, and Ruoqiang. The annual average emissions of TSP, PM₁₀, and PM_2.5 were 3.23 × 10⁷ t, 1.61 × 10⁷ t, and 2.41 × 10⁶ t, respectively. Bare land was the dominant source, contributing 72.55% of TSP emissions. Both total emissions and emission factors showed an overall upward trend, reaching their lowest point around 2012, followed by significant increases in most counties during 2012–2022. Annual precipitation, wind speed, and temperature were identified as the primary climatic drivers of soil dust emissions across all counties, and their influences exhibited pronounced spatial heterogeneity in Bazhou. In Ruoqiang, Bohu, Korla, and Qiemo, dust emissions are mainly limited by precipitation, although dry conditions and sparse vegetation can amplify the role of wind. In Heshuo, Hejing, and Yanqi, stable vegetation helps to lessen wind’s impact. In Yuli, wind speed and temperature are the main drivers, whereas in Luntai, precipitation and temperature are both important constraints. These findings highlight the need to consider emission intensity, land use, or surface condition changes, and the potential benefits of increasing vegetation cover in severely desertified areas when formulating regional dust mitigation strategies. Full article

Long-term source apportionment of PM_2.5 during high-pollution periods is essential for achieving sustained reductions in both PM_2.5 levels and their health impacts. This study conducted PM_2.5 sampling in Shenzhen from January to March over the years 2021–2024 to investigate the long-term impact of coronavirus disease 2019 and the short-term impact of the Spring Festival on PM_2.5 levels. The measured average PM_2.5 concentration during the research period was 22.5 μg/m³, with organic matter (OM) being the dominant component. Vehicle emissions, secondary sulfate, secondary nitrate, and secondary organic aerosol were identified by receptor model as the primary sources of PM_2.5 during the observational periods. The pandemic led to a decrease of between 30% and 50% in the contributions of most anthropogenic sources in 2022 compared to 2021, followed by a rebound. PM_2.5 levels in January–March 2024 dropped by 1.4 μg/m³ compared to 2021, mainly due to reduced vehicle emissions, secondary sulfate, fugitive dust, biomass burning, and industrial emissions, reflecting Shenzhen’s and nearby cities’ effective control measures. However, secondary nitrate and fireworks-related emissions rose significantly. During the Spring Festival, PM_2.5 concentrations were 23% lower than before the festival, but the contributions of fireworks burning exhibited a marked increase in both 2023 and 2024. Specifically, during intense peak events, fireworks burning triggered sharp, short-term spikes in characteristic metal concentrations, accounting for over 50% of PM_2.5 on those peak days. In the future, strict control over vehicle emissions and enhanced management of fireworks burning during special periods like the Spring Festival are necessary to reduce PM_2.5 concentration and improve air quality. Full article

The occurrence of haze pollution significantly deteriorates air quality and threatens human health, yet persistent knowledge gaps in real-time source apportionment of fine particulate matter (PM_2.5) hinder sustained improvements in atmospheric pollution conditions. Thus, this study employed single-particle aerosol mass spectrometry (SPAMS) to investigate PM_2.5 sources and dynamics during winter haze episodes in Yinchuan, Northwest China. Results showed that the average PM_2.5 concentration was 57 μg·m⁻³, peaking at 218 μg·m⁻³. PM_2.5 was dominated by organic carbon (OC, 17.3%), mixed carbonaceous particles (ECOC, 17.0%), and elemental carbon (EC, 14.3%). The primary sources were coal combustion (26.4%), fugitive dust (25.8%), and vehicle emissions (19.1%). Residential coal burning dominated coal emissions (80.9%), highlighting inefficient decentralized heating. Source contributions showed distinct diurnal patterns: coal combustion peaked nocturnally (29.3% at 09:00) due to heating and inversions, fugitive dust rose at night (28.6% at 19:00) from construction and low winds, and vehicle emissions aligned with traffic (17.5% at 07:00). Haze episodes were driven by synergistic increases in local coal (+4.0%), dust (+2.7%), and vehicle (+2.1%) emissions, compounded by regional transport (10.1–36.7%) of aged particles from northwestern zones. Fugitive dust correlated with sulfur dioxide (SO₂) and ozone (O₃) (p < 0.01), suggesting roles as carriers and reactive interfaces. Findings confirm local emission dominance with spatiotemporal heterogeneity and regional transport influence. SPAMS effectively resolved short-term pollution dynamics, providing critical insights for targeted air quality management in arid regions. Full article

Antimicrobial use in food animals selects for antimicrobial-resistant (AMR) bacteria, which most commonly reach humans via the food chain. However, AMR bacteria can also escape the feedyard via agricultural runoff, manure used as crop fertilizer, and even dust. A study published in 2015 reported AMR genes in dust from cattle feedyards; however, one of the study’s major limitations was the failure to investigate gene presence in viable bacteria, or more importantly, viable bacteria of importance to human health. Our main objective was to investigate the presence and quantity of viable bacteria and antimicrobial-resistant (AMR) determinants in fugitive bioaerosols from cattle feedyards in the downwind environment. Six bioaerosol sampling campaigns were conducted at three commercial beef cattle feedyards to assess variability in viable bacteria and AMR determinants associated with geographic location, meteorological conditions, and season. Dust samples were collected using four different sampling methods, and spiral plated in triplicate on both non-selective and antibiotic-selective media. Colonies of total aerobic bacteria, Enterococcus spp., Salmonella enterica, and Escherichia coli were enumerated. Viable bacteria, including AMR bacteria, were identified in dust from cattle feedyards. Bacteria and antimicrobial resistance genes (ARGs via qPCR) were mainly found in downwind samples. Total suspended particles (TSPs) and impinger samples yielded the highest bacterial counts. Genes encoding beta-lactam resistance (bla_CMY-2 and bla_CTX-M) were detected while the most common ARG was tet(M). The predominant Salmonella serovar identified was Lubbock. Further research is needed to assess how far viable AMR bacteria can travel in the ambient environment downwind from cattle feedyards, to model potential public health risks. Full article

Background: Only a few studies have reported on chlorinated paraffin (CP) levels, especially long-chain chlorinated paraffins (LCCPs), in submicron particulate matter (PM₁) in the outdoor air around primary and secondary schools. Methods: This study examined concentrations of short-chain CPs (SCCPs), medium-chain CPs (MCCPs), and LCCPs in PM₁ samples from 96 schools across six cities in China’s Pearl River Delta region during the winter (October to December 2018). Results: The median total CP concentration was 34 ng/m³, with median values for SCCP, MCCP, and LCCP of 17.3, 15, and 0.7 ng/m³, respectively. The primary congeners were C₁₃Cl_6–8 for SCCPs, C₁₄Cl_6–9 for MCCPs, and C₁₈Cl_7–10 for LCCPs. The SCCPs and MCCPs largely originated from fugitive dust, whereas the LCCPs were mainly sourced from organic chemical industries. Air masses from the South China Sea contributed most to SCCP and MCCP levels, while those from the east coast accounted for the highest LCCP levels. The concentrations of CP in PM₁ were significantly positively correlated with PM₁ levels. Conclusions: The exposure risk assessments by age indicated a very low current health risk from PM₁-related CP inhalation, although prolonged pollution could raise these risks as CP concentrations in ambient PM may continue to increase. Full article

During the natural cooling process of magnesium slag stockpiles in the open air, the phase transformation of gamma-dicalcium silicate (γ-C₂S) induces a powdering phenomenon, resulting in the generation of a large amount of PM10 and PM2.5 dust. Based on the dust emission model of stockpiles and the Gaussian dispersion model, combined with the Monte Carlo simulation method, this study conducted a quantitative assessment of the environmental risk of heavy metals (Pb, Cd, Hg, As, Cr(VI)) in dust to the surrounding residential areas. The results show that the enrichment degree of heavy metals in PM2.5 is significantly higher than that in PM10. At a downwind distance of 1000 m, the exceedance multiples of Cr(VI), As, and Cd reach 131.5, 23.6, and 51.8 times, respectively. The total carcinogenic risk (9.2 × 10⁻⁷) and total non-carcinogenic hazard quotient (0.15) in the residential area are below the limits, but the contribution rates of As and Cd are relatively high. Sensitivity analysis further reveals that the moisture content of the stockpile, dust removal rate, and distance are the key control parameters affecting the environmental risk. Based on the research findings, it is recommended to increase sprinkling frequency, install windbreak nets, and promote magnesium slag utilization to effectively control dust risks. Full article

Soil fugitive dust (SFD) is a significant contributor to environmental particulate matter (PM), which not only pollutes and affects air quality but also poses risks to human health. The emission inventory can provide a basis for the effective prevention and control of SFD pollution. However, current emission inventories with low resolution and frequency make it difficult to assess dust emissions accurately. Obtaining monthly high-resolution bare soil information is one of the solutions for compiling SFD emission inventories. Taking Daxing District, Beijing, as a case study, this study first extracted bare soil for each month of 2020, 2021, and 2022, respectively, using high-spatial-resolution remote sensing satellite data, and then constructed a 10 m-size emission grid and monthly SFD emission inventories based on the wind erosion equation by inputting vegetation cover factor, meteorological data, and soil erosion index. The total emissions of TSP, PM₁₀, and PM_2.5 in Daxing District from 2020 to 2022 were 3996.54 tons, 359.26 tons, and 25.25 tons, respectively. Temporally, the SFD emissions showed a decreasing trend over the years and were mainly concentrated in the winter and spring seasons. Spatially, the SFD emissions were predominantly concentrated in the southern and northern areas. And the emissions of PM₁₀ exhibit a significantly stronger correlation with wind speed and the extent of bare soil area. Full article

Ventilation Air Methane (VAM) significantly contributes to global warming. Capturing and mitigating these emissions can help combat climate change. One effective method is the thermal decomposition of methane, but it requires careful control to prevent explosions from the high temperatures involved. This research investigates the influence of methane concentration and coal dust particle properties on the minimum ignition energy (MIE) required for fugitive methane thermal decomposition and flame propagation properties. This knowledge is crucial for the mining industry to effectively prevent and mitigate accidental fires and explosions in VAM abatement plants. Coal dust samples from three different sources were selected for this study. Experiments were conducted using a modified Hartmann glass tube and a Thermal Gravimetric Analyser (TGA). The chemical properties of coal dust were determined through ultimate and proximate analysis. The particle size distribution was determined using a Mastersizer 3000 apparatus (manufactured by Malvern Panalytical, Malvern, UK). The results showed that the MIE is significantly affected by coal dust particle size, with smaller particles (<74 µm) requiring less energy to ignite compared to coarser particles. Additionally, blending methane with coal dust further reduces the MIE. Introducing methane concentrations of 1% and 2.5% into the combustion space reduced the MIE by 25% and 74%, respectively, for the <74 µm coal dust size fraction. It was observed that coal dust concentration can either raise or lower the MIE. Larger coal dust concentrations, acting as a heat sink, reduce the likelihood of ignition and increase the MIE. This effect was noted at a methane concentration of 2.5% and coal dust levels above 3000 g/m³. In contrast, small amounts of coal dust had little impact on MIE variation. Moreover, the presence of methane during combustion increased the upward flame travel distance and propagation velocity. The flame’s vertical travel distance increased from 124 mm to 300 mm for a coal dust concentration of 300 g·m⁻³ blended with 1% and 2.5% methane, respectively. Full article

Mining activities, particularly in large excavations like the Bingham Canyon Copper Mine in Utah, have been increasingly linked to respiratory conditions due to heavy-metal-enriched waste and dust. Operating continuously since 1906, the Bingham Canyon Copper Mine contributes 4.4% of the Salt Lake Valley PM2.5 pollution. However, the extent of its contributions to larger-sized particulate matter (PM10) dust, soil and water contamination, and human health impacts is largely unknown. Aerosol optical depth data from Sentinel-2 imagery revealed discernible dust clouds downwind of the mine and smelter on non-prevailing-wind days, suggesting potential heavy metal dispersion from this fugitive dust and subsequent deposition to nearby surface soils. Our analysis of topsoils from across the western Salt Lake Valley found mean arsenic, copper, lead, and zinc concentrations to be well above global background concentrations. Also, the minimum values for arsenic and maximum values for lead were well above the US EPA regional screening levels for residential soils. Thus, arsenic is the metal of greatest concern for impacts on human health. Elevated concentrations of all metals were most notable near the mine, smelter, and tailings pond. Our study linked these elevated heavy metal levels to regional asthma outcomes through cluster analysis and distance-related comparison tests. Significant clusters of high asthma rates were observed in regions with elevated topsoil heavy metal concentrations, impacting both low- and high-income neighborhoods. The findings of this preliminary study suggest that the mine, smelter, and recent construction activities, especially on lands reclaimed from former tailings ponds, could be contributing to atmospheric dust containing high levels of heavy metals and exacerbating asthma outcomes for residents. However, the methods used in the study with aggregated health outcome data cannot determine causal links between the heavy metal contents of soil and health outcomes; they can only point to potential links and a need for further investigation. Such further investigation should involve individual-level data and control for potential confounding factors, such as socioeconomic status, access to healthcare, and lifestyle factors, to isolate the effect of metal exposures on asthma outcomes. This study focused on atmospheric deposition as a source of heavy metal enrichment of topsoil. However, future research is also essential to assess levels of heavy metals in subsoil parent materials and local surface and groundwaters to be able to assess the links between the sources or methods of soil contamination and health outcomes. Full article

Fugitive dust is an important source of total suspended particulate matter in urban ambient air. The existing segmentation methods for dust sources face challenges in distinguishing key and secondary features, and they exhibit poor segmentation at the image edge. To address these issues, this paper proposes the Dust Source U-Net (DSU-Net), enhancing the U-Net model by incorporating VGG16 for feature extraction, and integrating the shuffle attention module into the jump connection branch to enhance feature acquisition. Furthermore, we combine Dice Loss, Focal Loss, and Activate Boundary Loss to improve the boundary extraction accuracy and reduce the loss oscillation. To evaluate the effectiveness of our model, we selected Jingmen City, Jingzhou City, and Yichang City in Hubei Province as the experimental area and established two dust source datasets from 0.5 m high-resolution remote sensing imagery acquired by the Jilin-1 satellite. Our created datasets include dataset HDSD-A for dust source segmentation and dataset HDSD-B for distinguishing the dust control measures. Comparative analyses of our proposed model with other typical segmentation models demonstrated that our proposed DSU-Net has the best detection performance, achieving a mIoU of 93% on dataset HDSD-A and 92% on dataset HDSD-B. In addition, we verified that it can be successfully applied to detect dust sources in urban areas. Full article

Road silt loading (sL) directly affects the fugitive road dust (FRD) emission factor, which is an important parameter in the study of FRD emissions. In this study, an improved collection method combined with the AP−42 method was newly developed to estimate the sL of asphalt roads in Jinan, China. The characteristics of sL in Jinan followed the order National highway (NH) > Branch road (BR) > Provincial highway (PH) > Country highway (CH) > Minor arterial (MiA) > Major arterial (MaA) > Urban expressway (UE) with 3.9 ± 2.5, 3.9 ± 1.9, 3.8 ± 2.8, 3.8 ± 0.9, 2.1 ± 1.4, 1.7 ± 1.2, and 1.4 ± 1.2 g/m², respectively. The size orders of PM_2.5 and PM₁₀ emission factors are consistent with total suspended particulate (TSP). The characteristics of the TSP emission factor of FRD followed the order NH > PH > CH > Expressway (EW) > MiA > BR > MaA > UE with 27.3, 23.4, 19.4, 13.7, 7.7, 7.4, 6.2, and 3.0 g/VKT (vehicle kilometers traveled), respectively. The annual emissions of TSP, PM₁₀, and PM_2.5 from FRD in Jinan in 2020 were about 985.2, 209.8, and 57.8 kt, respectively. Laiwu, Jiyang, and Licheng districts show the top three TSP emissions of FRD; the sum of their emissions accounts for 44.7% of the TSP emissions from FRD in Jinan. TSP emissions from municipal roads and administrative roads accounted for about 29.2% and 70.8% of the total emissions in Jinan, respectively, of which emissions from MiA accounted for the largest proportion of TSP emissions from municipal roads, contributing about 37.9%, while TSP emissions from NH made the largest contribution to TSP emissions from administrative roads, with a contribution of about 35.8%. Based on Monte Carlo simulation results using Crystal Ball, the uncertainty range of the emission inventory of FRD in Jinan ranged from −79.9 to 151.8%. In 2020, about 985,200 tons of road particulate matter in Jinan City entered the atmosphere, having an adverse effect on air quality and human health. Full article

Since 2016, the Ministry of Ecology and Environment and the Beijing Municipal Government have adjusted the minimum concentration limit for ambient air dustfall several times, indicating that they attach great importance to dustfall. To grasp the pollution characteristics and sources of dustfall, in this work, the filtration method was used to determine the insoluble dustfall and water-soluble dustfall in the urban area of Beijing. From our analysis, the influence of the meteorological parameters on dustfall was found, and the chemical components of dustfall were determined. The positive matrix factorization (PMF) model was also utilized to analyze the sources of dustfall. The results indicated that the average amount of dustfall in 2021–2022 was 4.4 t·(km²·30 d)⁻¹, and the proportion of insoluble dustfall deposition was 82.4%. Dustfall was positively correlated with the average wind speed and temperature and negatively correlated with the relative humidity and rain precipitation. The impact of the meteorological parameters on insoluble dustfall and water-soluble dustfall was the opposite. The average proportions of crustal material, ions, organic matter, element carbon, trace elements, and unknown components were 48%, 16%, 14%, 1.4%, 0.20%, and 20%, respectively. The proportions of the crustal material and ions were the highest in spring (57%) and summer (37%). The contribution rates of fugitive dust source, secondary inorganic source, mobile source, coal combustion source, snow melting agent source, and other sources were 42.4%, 19.3%, 8.3%, 3.0%, 2.7%, and 24.3%, respectively. This study supported dustfall pollution control by analysing the pollutant characteristics and sources of dustfall from the standpoint of total chemical components. In order to better control dustfall pollution, control measures and evaluation standards for fugitive dust pollution should be formulated. Full article

The construction industry strives for sustainable solutions to tackle environmental challenges and optimize resource use. One such focus area is the management of industrial byproducts and waste materials, including fugitive dust control through wheel washers. While wheel washers play a pivotal role in dust management, they generate a challenging byproduct known as wheel washer sludge (WWS). The disposal of WWS is complicated due to its composition and potential hazards. Recent research explores reusing WWS in construction materials, particularly in repair mortar, aiming for sustainability and circular economy principles. This study investigates the incorporation of WWS into repair mortar formulations, evaluating mechanical properties, durability, and environmental implications. Results show that WWS enhances workability but prolongs setting time. Mechanical strength tests reveal improvements with WWS addition, especially when pretreated. Water absorption rates decrease with pretreated WWS, indicating enhanced durability. Chemical attack tests demonstrate resistance to carbonation and chloride penetration, especially with modified WWS. Freeze–thaw tests reveal improved resistance with WWS addition, particularly modified. Microstructure analysis confirms hydration products and denser matrices with WWS inclusion. Environmental hazard analysis shows WWS contains no harmful heavy metals, indicating its suitability for use in repairs. Overall, this study highlights the technical feasibility and environmental benefits of incorporating WWS into repair mortar, contributing to sustainable construction practices. Full article