Search Results (733)

Interior Permanent Magnet Synchronous Motors (IPMSMs) are widely used in the electrification sector; however, reliance on rare-earth magnets imposes constraints stemming from supply instability and mining-related environmental impacts, raising sustainability concerns. To address these issues, this study investigates an IPMSM employing a consequent pole (CP) structure, in which one permanent magnet pole is replaced by iron. Because flux asymmetry in CP IPMSMs can cause torque ripple and associated vibration and noise, we propose an Intersect Consequent Pole (ICP) rotor geometry and evaluate it against a conventional IPMSM under identical stator conditions. The proposed ICP topology reduces permanent magnet usage and provides a rare-earth-reduced design alternative that addresses the vibration/noise trade-off, with a particular focus on electric power steering (EPS) applications. Electromagnetic characteristics and performance were analyzed using finite element analysis (FEA) and verified via FEA-based comparisons. Full article

Iron detection is of growing importance in the critical minerals sector, where unwanted iron ions are typically removed during the processing of target critical metals. The ideal sensor should utilize inexpensive, scalable materials along with a low-cost, robust, and easy-to-use analysis platform. Here, we demonstrate a simple acid–base synthesis of luminescent iron-responsive carbon dots by reacting ethanolamine, phosphoric acid, and m-phenylenediamine. The carbon dots exhibit selective, iron-specific emission quenching, with the ability to detect part-per-billion levels of iron ions even in 0.1 M HCl. After benchmarking the purified materials using a commercial spectrometer, a “low-cost” process is demonstrated in which carbon dots with minimal purification are coupled with a portable fiber-optic spectrometer for analyzing iron content. Carbon dot-coated paper strips are also evaluated as another convenient platform for iron analysis. Taken together, the sensing material and platforms demonstrated here are well-suited for detecting trace quantities of iron in environmentally relevant conditions, with potential applications in tracking iron removal processes during critical mineral production as one exciting area of interest. Full article

Using the Kaya identity and LMDI method, this study analyzes the influence of population, GDP per capita, energy intensity, and carbon intensity on Xinjiang’s carbon emissions, and compares the effects of industrial structure, energy intensity, and carbon intensity on the industrial sectors during the Eighth to Twelfth Five-Year Plan (FYP) periods. Key findings are as follows: (1) Xinjiang’s carbon emissions center on resource- and energy-intensive sectors, emissions from sectors such as extraction of petroleum and natural gas, fuel processing, chemicals, ceramics and cement, iron and steel, and non-ferrous and power generation accounted for 62% of carbon emissions in 2015; (2) after the Sixth FYP, GDP per capita effect turned into the core driver of carbon emission growth, while the population effect played an auxiliary role. Meanwhile, the energy intensity effect exerted a marked inhibitory impact on the increase in carbon emissions, yet the restraining effect of carbon intensity was comparatively limited; (3) during the Eighth to Twelfth FYPs, carbon emission growth was mainly attributed to industrial structure effects of the mining and washing of coal, extraction of petroleum and natural gas, fuel processing, chemicals, ceramics and cement, iron and steel, non-ferrous and power generation. Energy intensity and carbon intensity effects in various industries inhibited emission growth. Based on new trends in Xinjiang’s socioeconomic development, policy recommendations proposed including promoting the low-carbon transformation of industrial structure, profound restructuring of energy consumption, and improving energy efficiency by advancing energy-saving technology. Full article

Against the backdrop of the continuous growth in global demand for mineral resources, efficient and accurate mineral exploration technologies are of paramount importance. Therefore, utilizing remote sensing technology, which features wide coverage, a non-contact nature, and multi-source data acquisition, is of great significance for conducting mineral resource exploration and prospecting research. This study focuses on the Tsagaankhairkhan copper–gold mining area in Mongolia and proposes a structural-alteration anomalies coupling mining prediction method based on the collaboration of multi-source remote sensing data. By comprehensively utilizing multi-source image data from Landsat-8, GF-2, and Sentinel-2, and employing methods such as principal component analysis (PCA), band ratio, and texture analysis, we effectively extracted structural information closely related to mineralization, as well as alteration anomaly information, including hydroxyl alteration anomalies and iron-staining alteration anomalies. Landsat-8 and Sentinel-2 data were employed to extract and mutually validate hydroxyl and iron-staining alteration anomaly information in the study area, thereby delineating alteration anomaly zones. By integrating the results of structural interpretation, the distribution of alteration anomaly information, and their spatial coupling characteristics, we explored the spatial coupling relationship between structural and alteration anomalies, analyzed their mineral control patterns, and identified 7 prospecting target areas. These target areas exhibit abundant mineral anomalies and favorable structural settings, indicating high metallogenic potential. The research findings provide crucial clues for the exploration of the Tsagaankhairkhan copper–gold mine in Mongolia and can guide future mineral exploration and development efforts. Full article

In underground mining, the stage pillar (SP) is essential for maintaining stope stability, acting as a load-bearing structure between stages. Determining the minimum safe SP thickness is critical to balancing mineral recovery and operational safety. This study investigates the design and mechanical stability of SP under substantial backfill loads, using a representative Iron ore mine as a case study. Based on the geometry of the overlying backfill and core sampling data, extreme loading conditions were identified, with the stope measuring 85 m in height, 72 m in length, and 18 m in width. A mathematical model incorporating the pressure arch effect and triangular pillar geometry was developed to estimate the backfill-induced load. Safety factors for various SP thicknesses were calculated using thin plate and elastic beam theories. Considering sequential excavation of the first- and second-step stopes, the minimum safe SP thickness was determined to be 6.0 m. This design was evaluated using FLAC^3D numerical simulations. The results reveal that during the first step, stress concentrations occurred mainly at the pillar base, with a maximum displacement of approximately 2.0 cm and peak tensile stress of 0.36 MPa—both within acceptable limits. These findings support improved pillar design for safe, efficient ore recovery in underground metal mining. Full article

The presence of toxic elements in drinking water poses important risks to human health. Among the diverse methodologies available to remove these elements from water, adsorption methods are among the most effective; however, many adsorbent materials are either costly, not widely available, or difficult to handle. This work focuses on the application of a new natural geologic material, named “V” material, to prepare an adsorbent substrate applied to water treatment, using its adsorption properties to remove metallic species from aqueous media. The geologic material is a thermally and mechanically resistant material, composed basically of quartz, iron and aluminum oxides, with amphoteric properties. A granular medium or substrate was prepared via thermal treatment using three granulometric fractions of the material: the smaller fraction, less than 250 μm, named the fine fraction, VFF; from 250 μm to 425 μm, named the medium fraction, VMF; and from 425 μm to 1200 μm, named the gross fraction, VGF. The experiments were carried out on both alkaline-treated and non-treated substrates, named activated and non-activated substrates, respectively. The BET and external surface, as well as the pore volume, increased significantly after the calcination process. The adsorption isotherms pointed to a strong interaction between metallic ions and activated substrates, in contrast to the non-activated substrate, which showed much less affinity. This type of isotherm is associated with specific adsorption, where the adsorption occurs chemically between Cu²⁺ ions and the substrate surface, basically composed of amphoteric metallic oxides. The adsorption data fit fairly well to the Freundlich and Langmuir models, where the K values are higher for activated substrates. According to the Freundlich K values, the copper adsorptions on the activated substrates were higher: 5.0395, 3.9814 and 4.2165 mg/g, compared with 0.3622, 1.8843 and 0.4544 mg/g on non-activated substrates. The pH measurements showed the production of 0.56 and 0.10 μmol H⁺ during the adsorption reaction on the activated substrate, following the theoretical model for the chemisorption of transitional metals on amphoteric oxides. These results show the potential applicability of this kind of substrate in retaining transitional metals from polluted drinkable water at low cost. It is environmentally friendly, non-toxic, and available for rural media and mining-impacted regions. Full article

This paper presents a case study on heap bioleaching at the Monywa copper mine in Myanmar. Through mineralogical characterization and leaching tests, specific heap bioleaching technologies were developed and implemented at the mine. These technologies include acidification and start-up of heap bioleaching without external acid addition, ore classification with process optimization, and selective inhibition of pyrite oxidation for acid/iron balance during heap bioleaching. The optimized heap bioleaching technologies implemented at the Monywa copper mine have reduced both capital and operating costs. These advantages are specifically reflected in the use of multi-lift pads for both heap bioleaching and final residue storage, optimized processing based on ore characteristics, and the implementation of a solution closed cycle process without the need for additional acid or neutralization. These findings demonstrate a cost-effective approach to heap bioleaching and provide practical insights for operational optimization in similar copper mines. Full article

Heavy metal contamination in rivers is a serious environmental and public health concern, especially in areas affected by mining. This study evaluated the levels of contamination and the associated ecological and carcinogenic risks in the sediments of the Cunas River, located in the central highlands of Peru. Sediment samples were collected from upstream and downstream sections. Several metals and metalloids were analyzed, including copper (Cu), chromium (Cr), iron (Fe), manganese (Mn), molybdenum (Mo), nickel (Ni), lead (Pb), vanadium (V), zinc (Zn), antimony (Sb), arsenic (As), and cadmium (Cd). The ecological risk assessment focused on ten of these elements, while carcinogenic and non-carcinogenic risks were assessed for seven metals selected based on their toxicological importance. The results showed that Cd and Pb concentrations were higher in the downstream section. Cd and As exceeded ecological risk thresholds. Regarding human health, As and Pb surpassed the acceptable limits for both the Hazard Index (HI) and the Potential Carcinogenic Risk (PCR). According to EPA guidelines, these values indicate a potentially significant lifetime cancer risk. The main exposure routes include direct contact with sediments and the consumption of aquatic organisms. Continuous monitoring, phytoremediation actions, and restrictions on the use of contaminated water are strongly recommended to reduce ecological and health risks. Full article

The chemical composition of bottom sediments in the northern part of Lake Umbozero, located in close proximity to a closed rare metal mine in the Murmansk Region, was studied. This study is a continuation of our research into the impact of closed rare metal mines and tailings on the environment. Samples were collected using an open gravity sampler in two sections of the lake in three replicates. The content of rare earth elements was determined using inductively coupled plasma mass spectrometry. The total content of elements was determined both in the surface layers of bottom sediments and in the deep layers that were formed in the preindustrial period and, thus, characterize the geochemical background of the study area. The average ∑REE in the surface layers of bottom sediments of Lake Umbozero in the wastewater reception area (Site 1) reaches 774 mg/kg, while for the area located north of the discharge site (Site 2), ∑REE was 208 mg/kg. The enrichment factor (EF), the geoaccumulation index (I_geo), the coefficient of the index of potential ecological risk (E_ir) and the index of potential ecological hazard (RI) were calculated. Assessing the total pollution of bottom sediments of Lake Umbozero with rare earth elements, the value of potential ecological risk reaches values corresponding to the level of low and moderate ecological risk of pollution (RI_{Site 1} = 164; RI_{Site 2} = 104). The conducted correlation analysis allowed us to establish the main phases containing rare earth elements in the bottom sediments of Lake Umbozero—oxyhydroxide complex compounds with iron and manganese. Full article

K-jarosite (KFe₃(SO₄)₂(OH)₆), the most common jarosite-type mineral in natural and industrial settings, has been widely studied to understand its dissolution behavior in both environmental and industrial contexts. However, reported kinetic data remain inconsistent due to the combined influence of kinetic factors, despite the importance of such data for optimizing system conditions and improving process control and environmental management. The present work aims to help elucidate K-jarosite dissolution by carrying out new experiments in sulfuric acid medium (pH 1 and 2) at different temperatures (296, 323 and 343 K) and using two initial concentrations (0.4 and 1 g of K-jarosite/kg of solution). K-jarosite was synthesized and characterized by analytical techniques (XRD, SEM and BET), and the composition was determined by induction-coupled plasma optical emission spectroscopy (ICP-OES). Derivative (DVKM), Noyes–Whitney (NWKM) and Shrinking Core (SCKM) kinetic models previously used in the literature of jarosite-type compounds were adjusted to the data obtained here and compared. The results showed that higher temperatures and lower pH led to faster dissolution rates. Smaller initial concentrations decreased the rates slightly but had less impact than the other variables. Experiments at pH 1 led to the dissolution of all jarosite solids, while at pH 2 they led to incomplete dissolution. Remarkably, at pH 2 and at higher temperatures (mainly at 343 K), there was slight reprecipitation of the iron. XRD analysis identified no peak other than K-jarosite peaks after dissolution. DVKM and NWKM represented the effect of the studied parameters well. However, only using SCKM was a kinetic equation describing the dissolution process obtained. While the behavior of the kinetic curve is well established, the model fails to correctly describe the induction period. Under extreme conditions (>323 K, pH 1), dissolution is described by a chemical reaction controlling stage and it changes to mass transport in mild conditions. As theoretically expected, the results obtained in this work give important information about the prediction of the behavior of jarosite dissolution in terrestrial environments (acid mine and acid rock drainages) and hydrometallurgical process in mild acidic conditions and high temperatures. Full article

The study of the material composition, textural, and structural features of skarns and magnetite ores is of great importance for increasing the efficiency of iron ore mining and its subsequent processing and enrichment. In the northwestern Balkhash region of Central Kazakhstan, there is a reserve iron ore region represented by a series of skarn contact-metasomatic deposits: Bapy, Zhuantobe, Karaulken, Akchagyl, Ushtobe, Kiyik, Taitobe, Tomashev, Kyzyl-Sayak, and others. The results of field investigations and laboratory analyses have enabled the characterization of the mineralogical and petrographic composition of the skarns, as well as their material composition and textural–structural features. All these specified characteristics of skarns reflect the stage-by-stage nature of the contact-metasomatic processes of iron ore formation. The skarn formation model at the Zhuantobe deposit developed over several stages: (1) the formation of skarns during granitoid intrusion and the establishment of conditions for contact metamorphism (resulting in iron-poor, barren diopside hornfels and marbles); (2) early skarn stage, during which anhydrous, dark-colored endo- and exoskarns composed of pyroxenes, magnetite, and hematite develop; (3) late fluid–hydrothermal stage, during which hornblende, epidote, calcite, and sulfides (pyrite, chalcopyrite, sphalerite, and galena) form; (4) oxidative supergene stage under near-surface conditions, during which limonite and iron hydroxides form. The conducted comprehensive analysis of the material composition and textural–structural features of iron ores of the Zhuantobe deposit made it possible to establish the influence of these parameters on the technological properties of ores. The performed studies make it possible to more accurately identify promising iron ore zones in skarns and predict the technological behavior of ore during processing. Full article

Block caving is a cost-effective mining method that enables the highly efficient mining of thick and large ore bodies. During ore extraction in block caving operations, the ore-drawing roadways require especially high safety standards. However, the complex in situ stress conditions and cyclic loading from caved ore significantly deteriorate the stability of the surrounding rock. This makes rock mass control particularly challenging, such that it is crucial to study an effective method for maintaining the long-term stability of the roadways. This research proposes a comprehensive approach combining laboratory rock mechanics testing, numerical simulation, and field engineering validation to design effective support strategies for disturbance-affected roadways. Laboratory tests provide accurate mechanical parameters for the rock mass, the numerical simulations allow for the comprehensive analysis of deformation–failure mechanisms under disturbance conditions, and field validation ensures the reliability and practical applicability of the proposed support method. This study focuses on a −285 m ore-drawing roadway in the western section of the Yanqianshan Iron Mine. The in situ stress distribution was characterized through rock mechanics testing and acoustic emission monitoring. The propagation mechanisms of ore-drawing disturbance waves within the rock mass were analyzed, and numerical simulations revealed the deformation patterns and failure modes under dynamic disturbance, upon which the support scheme was designed. The results demonstrate that the designed bolt–mesh–shotcrete support scheme can effectively control surrounding rock deformation within 5 mm and resists the deformation induced by cyclic disturbances. This study provides valuable technical support for stability management in block caving mines with similar conditions. Full article

Bioleaching, mediated by selected microflora, offers a more environmentally friendly and cost-effective alternative to traditional mining techniques by transforming metals from sulfide ores into water-soluble forms. Pyrite ores often contain valuable rare or noble metals, such as gold (Au), silver (Ag), nickel (Ni), and cobalt (Co), which can be leached through the metabolic activity of specific chemoautotrophic microorganisms. This study investigates the adaptation process of the Acidithiobacillus ferriphilus bacterial strain, originally isolated from acid mine drainage (AMD), for the bioleaching of pyrite. The progress of the bioleaching process was evidenced by the release of iron (3.6 mg/mL) and significant quantities of gold (0.21 mg/L, equivalent to 3 g/t) into the post-culture liquid. The results indicate that the most effective bioleaching was achieved during the final adaptation stage, utilizing a medium with 7% pyrite content and a 0.75% supplement of an easily accessible energy source in the form of iron sulfate. These findings confirm the potential of the A. ferriphilus strain for pyrite bioleaching. Full article

With the increasing intensity of resource development in alpine regions, numerous geotechnical engineering problems in cold regions have become increasingly prominent. In order to explore the damage and deterioration laws of rocks caused by freeze–thaw action, this paper takes the biotite granulite on the eastern slope of Yanshan Iron Mine as the research object. By analyzing the changes in mechanical and acoustic emission parameters of rock samples after freeze–thaw, and combining with existing freeze–thaw damage theories, the suitable freeze–thaw damage mechanism for this rock is further explored, and a freeze–thaw damage model for biotite granulite with low and high freeze–thaw cycles is established. The results of this study demonstrate that biotite granulite subjected to a lower number of freeze–thaw cycles exhibits significantly greater reductions in peak strength, elastic modulus, acoustic emission (AE) hit counts, cumulative ringing counts, and cumulative energy compared with specimens exposed to a higher number of cycles. As the freeze–thaw cycles increase, the formation of newly generated large-scale fractures during failure becomes progressively less pronounced, leading to a diminished resistance to deformation and a gradual increase in plastic deformation during loading. A coupled damage variable relationship was established for biotite granulite under both low and high freeze–thaw regimes based on cumulative AE ringing counts. In the early three stress stages, specimens subjected to fewer cycles exhibited fewer microcracks, with no clear spatial correlation between their distribution and the eventual fracture coalescence zones, whereas specimens exposed to a higher number of cycles showed a distinct sequential relationship between microcrack initiation sites and subsequent crack coalescence. Building upon existing freeze–thaw damage theories, the freeze–thaw damage mechanism specific to biotite granulite was further elucidated. Accordingly, a freeze–thaw damage model for low- and high-cycle conditions was developed and preliminarily validated. Full article

Surface subsidence induced by underground mining in mining areas significantly alters surface topography and hydrogeological conditions, forming depressions and fissures, thereby affecting regional runoff-ponding processes and groundwater infiltration patterns. Accurate assessment of infiltration volumes in subsidence zones under heavy rainfall is crucial for designing underground drainage systems and evaluating water-inrush risks in open-pit to underground transition mines. Taking the surface subsidence area of the Dahongshan Iron Mine as a case study, this paper proposes a rainfall infiltration calculation method based on the precise delineation of surface ponding-infiltration zones. By numerically simulating the subsidence range, the study divides the area into two distinct infiltration characteristic zones under different mining states: the caved zone and the water-conducting fracture zone. The rainfall infiltration volume under storm conditions was calculated separately for each zone. The results indicate that high-intensity mining-induced subsidence leads to a nonlinear surge in stormwater infiltration, primarily due to the significant expansion of the highly permeable caved zone. The core mechanism lies in the area expansion of the caved zone as a rapid infiltration channel, which dominates the overall infiltration capacity multiplication. These findings provide a scientific basis for the design of mine drainage systems and the prevention of water-inrush disasters. Full article