Search Results (27)

This study investigated the effects of inulin concentration and ultrasonic homogenization on the particle size distribution and microstructure of oil-in-water emulsion gels stabilized with psyllium husk. These gels were then incorporated into meal purees formulated for individuals with dysphagia. Under ultrasound treatment, an increase in inulin from 0% to 20% reduced the average droplet size from 14.98 μm to 1.58 μm, indicating a synergistic effect between ultrasound treatment and inulin in reducing and stabilizing droplet size. The optimal formulation under ultrasound was 20% (w/w) inulin. Scanning electron and polarized light microscopy confirmed that ultrasonic homogenization improved emulsion integrity by minimizing droplet size and promoting encapsulation. Inulin-rich emulsion gels, when added to purees, reduced structural voids, improved matrix cohesion, and lowered expressible fluid content. Enzymatic assays showed enhanced inhibition of α-amylase and α-glucosidase, indicating increased resistance to oral enzymatic degradation. Importantly, substituting emulsion gels at 10% (w/w) did not compromise puree firmness. All formulations met International Dysphagia Diet Standardization Initiative (IDDSI) Level 4 requirements, confirming their suitability for individuals with oropharyngeal dysphagia (OD). These findings demonstrate the potential of psyllium husk-stabilized emulsion gels as innovative texture-modifying agents for dysphagia-friendly food development. Full article

Background/Objectives: Dietary microstructure affects energy intake. Traditional Universal Eating Monitors (UEMs) offer accuracy but are limited for monitoring diverse diets. We developed the ‘Feeding Table’, a novel UEM that simultaneously tracks intake of up to 12 foods, enabling high-resolution monitoring of eating microstructure for multiple foods simultaneously. Methods: Forty-nine healthy volunteers participated: 15 (10 male, 8 female) in a location preference experiment and 31 (15 male, 16 female) in a standard meal test. The location preference study involved four weekly sessions. Participants received a standardized breakfast based on individual energy needs; lunch intake was measured 3 h later with food items in pseudo-randomized positions. The standard meal test occurred over two consecutive days to assess the Feeding Table’s performance in monitoring eating behavior under standardized conditions. Results: In two consecutive days of standard meal tests, the Feeding Table showed reasonable day-to-day repeatability for energy and macronutrient intake (energy: r = 0.82; fat: r = 0.86; carbohydrate: r = 0.86; protein: r = 0.58). Among the four repeated intake measurements, the results demonstrated high intra-class correlation coefficients (ICCs: energy 0.94, protein 0.90, fat 0.90, and carbohydrate 0.93). No significant positional bias was observed (energy: p = 0.07; macronutrients: p = 0.70). Conclusions: The Feeding Table maintains UEM accuracy while enabling multi-food, real-time monitoring of dietary microstructure and food choice, offering enhanced precision for studying eating behaviors. Full article

Although corn germ meal is a rich source of dietary fiber, it contains a relatively low proportion of soluble dietary fiber (SDF) and is frequently contaminated with high levels of zearalenone (ZEN). Solid-state fermentation has the dual effects of modifying dietary fiber (DF) and degrading mycotoxins. This study optimized the solid-state fermentation process of corn germ meal using Bacillus subtilis K6 through response surface methodology (RSM) to enhance SDF yield while efficiently degrading ZEN. Results indicated that fermentation solid-to-liquid ratio and time had greater impacts on SDF yield and ZEN degradation rate than fermentation temperature. The optimal conditions were determined as temperature 36.5 °C, time 65 h, and solid-to-liquid ratio 1:0.82 (w/v). Under these conditions, the ZEN degradation rate reached 96.27 ± 0.53%, while the SDF yield increased from 9.47 ± 0.68% to 20.11 ± 1.87% (optimizing the SDF/DF ratio from 1:7 to 1:3). Scanning electron microscopy (SEM) and confocal laser scanning microscope (CLSM) revealed the structural transformation of dietary fiber from smooth to loose and porous forms. This structural modification resulted in a significant improvement in the physicochemical properties of dietary fiber, with water-holding capacity (WHC), oil-holding capacity (OHC), and water-swelling capacity (WSC) increasing by 34.8%, 16.4%, and 15.2%, respectively. Additionally, the protein and total phenolic contents increased by 23.0% and 82.61%, respectively. This research has achieved efficient detoxification and dietary fiber modification of corn germ meal, significantly enhancing the resource utilization rate of corn by-products and providing technical and theoretical support for industrial production applications. Full article

Chitosan is recognized by its capacity to bind lipids based on the viscosity and degree of deacetylation. We analyzed the in vitro binding of Procambarus clarkii chitosan (PCC) with extra virgin olive oil and sunflower oil at temperatures and pH levels that approximate gastric-like conditions. In the tube test, 4 mg of PCC and 0.3 g of either EVO or of SO oils were mixed by stirring in test tubes with 4 mL of water acidified with HCl to a pH of 3. The PCC binding capability was determined by measuring the differences between the suspension without PCC and the suspension with PCC added. A scanning electron microscope (SEM) was utilized to further observe the uniformity and morphology of the emulsified PCC/oil hydrogels. In the test tube, PCC was shown to have a 1:11 (w/w) binding capacity for EVO and 1:15 (w/w) for SO. The SEM-based examination demonstrated a smooth surface with fine porosity of the microstructure of either PCC/oil hydrogel, proving successful emulsification. Under conditions similar to those in the stomach after a meal, including acidity, mixed composition, and temperature, PCC efficiently binds and emulsifies EVO and SO. Full article

Flaxseed meal (FSM) is a by-product of flaxseed product production that is wasted unreasonably at present. In this study, we used Bacillus subtilis K6, a dominant microbial strain, for solid-state fermentation (SSF) of FSM following preliminary screening to improve FSM utilization efficiency and enhance the soluble dietary fiber (SDF) content while modifying its functional properties. FSM’s microstructure was characterized before and after fermentation, and the functional properties of the dietary fiber (DF) in the FSM were assessed. Single-factor experiments combined with response surface methodology were conducted to optimize SSF parameters using SDF yield as the response variable. The optimal conditions were determined as follows: 45 h fermentation time, 40.5 °C temperature, and 1:0.65 material-to-liquid ratio. Under these conditions, the SDF yield reached 33.45 ± 0.24%, an SDF yield increase of 36.92%. Scanning electron microscopy and confocal laser scanning microscopy demonstrated FSM’s structural disruption during fermentation. Furthermore, SDF and insoluble DF showed improved water-holding, oil-holding, and swelling capacities following fermentation. These results indicate that SSF effectively enhances the SDF content in FSM and optimizes its functional properties, thereby providing a theoretical foundation for the valorization of flaxseed by-products. Full article

The dynamic process of eating—including chewing, biting, swallowing, food items, eating time and rate, mass, environment, and other metrics—may characterize behavioral aspects of eating. This article presents a systematic review of the use of sensor technology to measure and monitor eating behavior. The PRISMA 2020 guidelines were followed to review the full texts of 161 scientific manuscripts. The contributions of this review article are twofold: (i) A taxonomy of sensors for quantifying various aspects of eating behavior is established, classifying the types of sensors used (such as acoustic, motion, strain, distance, physiological, cameras, and others). (ii) The accuracy of measurement devices and methods is assessed. The review highlights the advantages and limitations of methods that measure and monitor different eating metrics using a combination of sensor modalities and machine learning algorithms. Furthermore, it emphasizes the importance of testing these methods outside of restricted laboratory conditions, and it highlights the necessity of further research to develop privacy-preserving approaches, such as filtering out non-food-related sounds or images, to ensure user confidentiality and comfort. The review concludes with a discussion of challenges and future trends in the use of sensors for monitoring eating behavior. Full article

Fermented vegetable spreads could offer an opportunity to diversify the range of plant-based foods. The challenge in developing the spreads is to achieve high quality, including stable consistency, consumer desirability and high nutritional value. The aim was to evaluate the application of chia and flaxseed meal for fermented zucchini-cucumber spread production. The effect on the chemical composition, phenolic compound content, antioxidant activity, and sensory quality of the vegetable spread was evaluated. Its color, viscosity, and microstructure were also analyzed using instrumental methods. The meal addition varied from 4.0 to 14.0%. The spread with meal addition had higher fat, protein, ash, and dietary fiber content than the control. Total free phenolic compound content and antioxidant activity also increased, and chia seed meal impacted the parameters more. On the contrary, flaxseed meal improved more the product’s consumer desirability than chia. Both were effective gelling agents that increased viscosity and enhanced product spreadability, and only flaxseed meal showed a masking ability. Its addition reduced the perception and intensity of the bitter, tart, and sour taste. The spread formula consisting of fermented zucchini and cucumber with 9 to 11.5% flaxseed meal addition was the most recommended to achieve the product with high consumer desirability. Full article

Alite calcium sulfoaluminate (ACSA) cement is an innovative and environmentally friendly cement compared to ordinary Portland cement (OPC). The synthesis and hydration of ACSA clinkers doped with gradient sulfur were investigated. The clinker compositions and hydrated pastes were characterized by X-ray diffraction (XRD), isothermal calorimetry, mercury intrusion porosimetry (MIP), and scanning electron microscopy (SEM) to analyze its mineral contents, hydration products, heat release, pore structure, and microstructure. The compressive strength and linear expansion of ACSA mortars were tested for their mechanical properties. Results showed that clinkers doped with 2 wt.% MgO can offset the hurdle that SO₃ caused to the formation of C₃S (tricalcium silicate). Clinkers with varying ratios of C₃S and C₄A₃$ (calcium sulfoaluminate) were obtained, achieving 58–70% C₃S and 2.0–5.6% C₄A₃$ in ACSA through adjusting the KH (lime saturation factor) values and SO₃ dosage. ACSA cement showed better early mechanical properties. The 0.93 KH value with 3% SO₃ dosage in the raw meal, which contains 63.9% C₃S and 2.98% C₄A₃$ in the clinker, reached an optimal compressive strength level at 1d (26.35 MPa) and at 3d (39.41 MPa), marking 30.45% and 18.70% increases compared to PII 52.5. The excellent early strength of ACSA cement may offer promising applications t increasing the incorporation of supplementary cementitious materials, thereby reduce pollution and carbon emissions. Full article

To improve the quality of palm kernel meal (PKM), the effect of solid-state fermentation (SSF) with Bacillus velezensis, Saccharomyces cerevisiae and Lactobacillus paracasei on nutritional components, anti-nutritional factor and antioxidant activity were investigated. The results show that inoculation ratio of three strains 4:2:1, inoculation amount 21%, moisture content 52%, fermentation temperature 34 °C and fermentation time 60 h were the optimal SSF conditions. After 60 h of fermentation, the content of neutral detergent fiber (NDF), acid detergent fiber (ADF), acid detergent lignin (ADL), cellulose and hemicellulose in PKM were significantly decreased by 22.5%, 18.2%, 20.2%, 17.6% and 32.4%, respectively. Meanwhile, the content of crude protein, soluble protein, peptides, amino acids and reducing sugar were increased significantly by 27.3%, 193%, 134%, 16.3% and 228%, respectively. SSF significantly improved the total phenolic content, DPPH radical scavenging activity, hydroxyl radical scavenging activity and reducing power. In addition, in vitro dry matter digestibility (IVDMD) and in vitro crude protein digestibility (IVCPD) were increased. Scanning electron microscopy (SEM) analysis revealed microstructural alterations in PKM. The results indicate that SSF with B. velezensis, S. cerevisiae and L. paracasei is an effective and promising method to enhance the nutritional value and antioxidant activity of PKM, providing a feasible solution for increasing the utilization of PKM in animal feed. Full article

Microwaving has been used to qualitatively improve feed ingredients prior to including them in cattle feed. However, it is not known whether feed ingredients should be microwaved separately or in a mixture before being included in cattle feed concentrates. In the current study, the effects of the partial and full microwaving of high starch ingredients were investigated regarding their impact on the nutritional composition, physicochemical properties, and in vitro digestibility of feed concentrates. The cassava was microwave-irradiated before being mixed with other ingredients (MC, 35% of formulation). A microwave-cooked cassava–corn meal mixture (MCC, 45% of formulation) and a combination of all solid components (MSI, 96% of formulation) were also compared. A feed containing non-microwaved ingredients was formulated and served as the control (NM). Significantly altered proximate compositions and nutritive profiles were observed in all the microwaved components (p < 0.05). The observed modifications in pHs, water absorption capacities, thermal properties (differential scanning calorimetry), diffraction patterns (X-ray diffractometry), and microstructures (scanning electron microscopy) indicated enhanced enzymatic hydrolysis in vitro. A higher cellulase organic matter solubility and digestible organic matter were observed in the MCC and MSIs feeds relative to the control NM (p < 0.05). These findings indicate a combination of components could be added to feedstock before it is microwave processed to potentially include this pretreatment in the feed production process. Full article

The effects of the dry processing of coconut oil on the amino acid composition, molecular weight, secondary structure, solubility, surface hydrophobicity, microstructure, total sulfhydryl and free sulfhydryl content, free amino acid content, thermal properties, and water-holding, oil-holding, foaming, and emulsifying properties of coconut isolate protein were investigated. The results showed that the dry processing altered the amino acid composition of coconut isolate proteins as well as resulted in fewer irregular structural regions and more homogeneous particle sizes, leading to an improvement in the thermal stability of the proteins. SDS-PAGE analysis showed that globular proteins located at ~34 kDa in coconut isolate proteins underwent slight degradation during the dry processing of coconut oil. The dry processing reduced the surface hydrophobicity, total and free sulfhydryl groups, solubility, and free amino acid content of coconut isolate proteins. In addition, the water-holding capacity, oil-holding capacity, and foam stability of coconut isolate proteins were improved to different degrees after the dry processing. Therefore, the development and utilization of copra meal protein is of great significance to increase its added value. Full article

Vector-borne diseases transmitted through the bites of hematophagous arthropods, such as mosquitoes, continue to be a significant threat to human health globally. Transmission of disease by biting arthropod vectors includes interactions between (1) saliva expectorated by a vector during blood meal acquisition from a human host, (2) the transmitted vector-borne pathogens, and (3) host cells present at the skin bite site. Currently, the investigation of bite-site biology is challenged by the lack of model 3D human skin tissues for in vitro analyses. To help fill this gap, we have used a tissue engineering approach to develop new stylized human dermal microvascular bed tissue approximates—complete with warm blood—built with 3D capillary alginate gel (Capgel) biomaterial scaffolds. These engineered tissues, termed a Biologic Interfacial Tissue-Engineered System (BITES), were cellularized with either human dermal fibroblasts (HDFs) or human umbilical vein endothelial cells (HUVECs). Both cell types formed tubular microvessel-like tissue structures of oriented cells (82% and 54% for HDFs and HUVECs, respectively) lining the unique Capgel parallel capillary microstructures. Female Aedes (Ae.) aegypti mosquitoes, a prototypic hematophagous biting vector arthropod, swarmed, bit, and probed blood-loaded HDF BITES microvessel bed tissues that were warmed (34–37 °C), acquiring blood meals in 151 ± 46 s on average, with some ingesting ≳4 µL or more of blood. Further, these tissue-engineered constructs could be cultured for at least three (3) days following blood meal acquisitions. Altogether, these studies serve as a powerful proof-of-concept demonstration of the innovative BITES platform and indicate its potential for the future investigation of arthropod bite-site cellular and molecular biology. Full article

The g-protein coupled receptor GPR-160, recently identified as a putative receptor for the cocaine and amphetamine-regulated transcript (CART) peptide, shows abundant expression in the energy-balance control nuclei, including the dorsal vagal complex (DVC). However, its physiological role in the control of food intake has yet to be fully explored. Here, we performed a virally mediated, targeted knockdown (KD) of Gpr160 in the DVC of male rats to evaluate its physiological role in control of feeding. Our results indicate that DVC Gpr160 KD affects meal microstructure. Specifically, DVC Gpr160 KD animals consumed more frequent, but shorter meals during the dark phase and showed decreased caloric intake and duration of meals during the light phase. Cumulatively, however, these bidirectional effects on feeding resulted in no difference in body weight gain. We next tested the role of DVC GPR-160 in mediating the anorexigenic effects of exogenous CART. Our results show that DVC Gpr160 KD partially attenuates CART’s anorexigenic effects. To further characterize Gpr160+ cells in the DVC, we utilized single-nucleus RNA sequencing data to uncover abundant GPR-160 expression in DVC microglia and only minimal expression in neurons. Altogether, our results suggest that DVC CART signaling may be mediated by Gpr160+ microglia, which in turn may be modulating DVC neuronal activity to control food intake. Full article

Soybean meal is a class of by-products obtained from the processing of soybean products. Despite its high nutritional value, the presence of glycoside isoflavones limits human use of soybean meal. This study evaluated the effect of solid-state fermentation (SSF) with different edible mushroom mycelia (Pleurotus ostreatus, Hericium erinaceus, and Flammulina velutipes) on the proximate composition, antioxidant properties, and physicochemical properties of fermented soybean meal powder (SP). The results revealed that fermented SP had a higher nutritional value when compared to SP. P. ostreatus was the most pronounced among the three species. Crude protein content was found to have increased by 9.49%, while the concentration of glutamate and aspartic acid increased by 23.39% and 23.16%, respectively. SSF process significantly increased the total polyphenol content (TPC) and aglycone isoflavone content by 235.9% and 324.12%, respectively, resulting in increased antioxidant activity (evaluated by the DPPH, •OH, ABTS⁺ assays). Microstructural changes in fermented SP and nutrient degradation and utilization were observed. Thus, fermented SP can be used as a raw material with enhanced nutritional properties to develop new functional foods, such as plant-based foods represented by plant meat. It provides a promising approach for increasing the added value of soybean meal. Full article

The physicochemical quality and shelf-life of fillets from barramundi, which were fed for 56 days on a mixture of poultry by-product meal (PBM), full-fat Hermetia illucens (FHI), and defatted HI (DHI), were investigated and compared to a fishmeal (FM) control diet. The proximate and total amino acids compositions of the fillets were unaffected by the test diets, while the mixture of PBM and HI larvae improved the sensory quality. An eight-day shelf-life study showed that PBM-HI-based diets improved the texture profile based upon the chewiness, cohesiveness, gumminess, and hardness, regardless of the storage time. The improved texture was aligned with comparatively less degradation of the microstructure of the muscle tissue in the same diets. An improvement in the quality index (QI) value, an increase in pH, and a decrease in lipid oxidation were also found in the fillets of barramundi fed test diets compared with the control diet during the storage time. The test diets positively influenced flesh lightness and redness, while the color profiles were negatively influenced by the storage time. Overall, the maintenance of compositional attributes; the enhancement of fillet sensory attributes, texture, and brightness; and the improved raw fillet shelf-life support the inclusion of PBM-HI-based diets in aquafeed. Full article