Search Results (4,884)

The direct deposition of highly concentrated polyelectrolyte complexes based on poly(ethyleneimine) (PEI) and poly(sodium methacrylate) (PMANa) onto inorganic sand microparticles (F100 and F200) resulted in the formation of versatile core-shell composites with fast removal properties in dynamic conditions toward anionic charged pollutants. Herein, in situ-generated nonstoichiometric PEI/PMANa polyelectrolyte complexes were directly precipitated as a soft organic shell onto solid sand microparticles at a 5% mass ratio (organic/inorganic part = 5%, w/w%). The sorption of an anionic model pollutant (Indigo Carmine (IC)) onto the composite particles in dynamic conditions depended on the inorganic core size, the flow rate, the bed type (fixed or fluidized) and the initial dye concentration. The maximum sorption capacity, after 10 cycles of sorption/desorption of IC onto F100@P5% and F200@P5%, was between 16 and 18 mg IC/mL composite. The newly synthesized core-shell composites could immobilize IC at a high flow rate (8 mL/min), either from concentrated (C_IC = 60 mg/L) or very diluted (C_IC = 0.2 mg/L) IC aqueous solution, demonstrating that this type of material could be promising in water treatment or efficient in solid-phase extraction (concentration factor of 2000). Full article

This study valorizes onion peel, an agro-industrial by-product rich in phenolic compounds and structural carbohydrates, for the development of cassava starch-based biodegradable films. The films were prepared using the solution casting method; a cassava starch matrix was mixed with a 2.5% glycerol solution and heated to 85 °C for 30 min. A separate solution of onion peel powder (OPP) in distilled water was prepared at 25 °C. The two solutions were then combined and stirred for an additional 2 min before 25 mL of the final mixture was cast to form the films. Onion peel powder (OPP) incorporation produced darker and more opaque films, suitable for packaging light-sensitive foods. Film thickness increased with OPP content (0.138–0.218 mm), while moisture content (19.2–32.6%) and solubility (24.0–25.2%) decreased. Conversely, water vapor permeability (WVP) significantly increased (1.69 × 10⁻⁹–2.77 × 10⁻⁹ g·m⁻¹·s⁻¹·Pa⁻¹; p < 0.0001), reflecting the hydrophilic nature of OPP. Thermal analysis (TGA/DSC) indicated stability up to 245 °C, supporting applications as food coatings. Morphological analysis (SEM) revealed OPP microparticles embedded in the starch matrix, with FTIR and XRD suggesting electrostatic and hydrogen–bond interactions. Mechanically, tensile strength improved (up to 2.71 MPa) while elongation decreased (14.1%), indicating stronger but less flexible films. Biodegradability assays showed slightly reduced degradation (29.0–31.8%) compared with the control (38.4%), likely due to antimicrobial phenolics inhibiting soil microbiota. Overall, OPP and cassava starch represent low-cost, abundant raw materials for the formulation of functional biopolymer films with potential in sustainable food packaging. Full article

Deep coalbed methane reservoirs must utilize hydraulic fracturing technology to create high-conductivity sand-filled fractures for economical development. However, the mechanism by which proppant embedment affects fracture width in coal rock is not yet clear. In this article, using the discrete element particle flow method, we have developed a numerical simulation model that can replicate the dynamic process of proppant embedment into the fracture surface. By tracking particle positions, we have accurately characterized the dynamic changes in fracture width and proppant embedment depth. The consistency between experimental measurements of average fracture width and numerical results demonstrates the reliability of our numerical model. Using this model, we analyzed the mechanisms by which different proppant particle sizes, number of layers, and closure stresses affect fracture width. The force among particles under different proppant embedment conditions and the induced stress field around the fracture were also studied. Numerical simulation results show that stress concentration formed by proppant embedment in the fracture surface leads to the generation of numerous induced micro-fractures. As the proppant grain size and closure stress increase, the stress concentration formed by proppant embedment in the fracture surface intensifies, and the variability in fracture width along the fracture length direction also increases. With more layers of proppant placement, the particles counteract some of the closure stress, thereby reducing the degree of proppant embedment around the fracture surface. Full article

The utilization of encapsulated biopharmaceuticals, including peptides and proteins, has grown substantially in recent years. In this study, the influence of aliphatic polyester physicochemical properties, specifically crystallinity and hydrophobicity, on the development of protein-loaded microparticles was investigated. A series of polyesters, namely amorphous PDLLA and semicrystalline PLLA, PCL, and PPDL, were synthesized via chemical and enzymatic ring-opening polymerization. Bovine serum albumin (BSA)-loaded microparticles were fabricated using a water-in-oil-in-water (w/o/w) double emulsion solvent evaporation method. The size of microparticles obtained was determined by scanning electron microscopy and dynamic light scattering methods. The enzymatic degradation of the polymer microparticles was assessed through incubation in a lipase-containing buffer solution. BSA and α-chymotrypsin (ACHT) were used as model proteins for the preparation of encapsulated polymer microspheres and comparison of their characteristics and properties. Protein encapsulation efficacy, release rate, and enzyme activity retained after encapsulation were evaluated and compared for selected aliphatic polyesters. The release profiles were processed with the use of various mathematical models to reveal the possible mechanism(s) of protein release. Full article

Over the past decade, increasing attention has been given to the impacts of anthropogenic microparticle (AM) pollution on marine ecosystems. This study investigates AM ingestion in three commercially important fish species—Sparus aurata Linnaeus, 1758, Dicentrarchus labrax Linnaeus, 1758, and Boops boops Linnaeus, 1758—collected from both wild and farmed populations in Greek marine and lagoon environments. A total of 60 specimens were sampled from the Messolonghi Lagoon, Rhodes Island, and the Cyclades. AM were detected in 61.7% of the individuals analyzed. The mean number of ingested items per individual was 1.1 ± 1.2 in B. boops, 1.0 ± 1.7 in wild and 2.3 ± 2.1 in farmed S. aurata, and 2.5 ± 3.1 in wild and 3.6 ± 2.2 in farmed D. labrax. Ingestion ranged from 0 to 9 items per fish. No significant correlations were found between fish size and either the number or the size of ingested AM in any species. The ingested AM were primarily classified as fibers and fragments, displaying variability in size and color. Black was the dominant color across all species, followed by red and blue, while yellow was rarely observed. A statistically significant difference in the mean size of AM was recorded between wild and farmed D. labrax, whereas no such difference was observed for S. aurata. Overall, these findings provide new evidence on AM contamination in seafood species and highlight their occurrence in both natural and aquaculture environments of the eastern Mediterranean. Full article

Cement-based materials are essential construction components, yet their complex microstructures critically govern mechanical performance and durability. This study investigates the micro-textural characteristics and mechanical properties of cement paste modified with grinding aids (triethanolamine, TEA; maleic acid triethanolamine ester, MGA) and polycarboxylate-based superplasticizer (PCA). Moving beyond qualitative SEM limitations, we employ advanced image-based quantitative techniques: grayscale-based texture analysis for statistical evaluation and fractal dimension analysis for geometric quantification of microstructural irregularity. Results demonstrate that grinding aids enhance particle dispersion and reduce agglomeration, resulting in a more uniform micro-texture characterized by lower grayscale variability and reduced fractal dimensions. PCA superplasticizers further significantly enhance fluidity and compressive strength. The optimal formulation (MGA + PCA) achieved a 20% increase in 28-day compressive strength compared to control samples. The fractal dimension D_B exhibits a positive correlation with compressive strength, while energy and correlation values show a negative correlation; in contrast, entropy and contrast values demonstrate a positive correlation. This research advances quantitative microstructure characterization in cementitious materials, offering insights for tailored additive formulations to enhance sustainability and efficiency in concrete production. Full article

Background/Objectives: Hepatitis B virus (HBV) remains a persistent challenge for transfusion safety. Although testing for hepatitis B surface antigen (HBsAg) and nucleic acid testing (NAT) reduces transmission risk, antibodies to hepatitis B core antigen (anti-HBc) and antibodies to hepatitis B surface antigen (anti-HBs) provide additional insight into past infection and vaccine-induced immunity. We aimed to determine their seroprevalence among blood donors in southern Croatia and assess associations with age, occupation, and time since vaccination. Methods: This cross-sectional study was conducted between February and November 2024 at two regional transfusion centers in southern Croatia. A total of 1008 voluntary blood donors, all HBsAg- and NAT-negative, were tested for anti-HBc and anti-HBs using chemiluminescent microparticle immunoassay. Demographic and vaccination data were collected through verified medical records. Results: Anti-HBc was detected in 0.5% of donors, exclusively among the unvaccinated. Protective anti-HBs levels were found in 38.1% overall and 70.6% of vaccinated donors, with significant declines by age and more than 15 years post-vaccination (p = 0.024). Healthcare workers showed higher seroprotection than non-healthcare donors (67.0% vs. 35.1%; p < 0.001), although one-third still lacked protective levels. Conclusions: HBV exposure was rare, but waning vaccine-induced immunity was evident, with protective anti-HBs levels in 70.6% of vaccinated donors, declining with age and time since vaccination. These findings highlight the need for periodic monitoring of anti-HBs and targeted booster strategies, especially in older and occupationally exposed groups. HBsAg and NAT provide a high level of transfusion safety, while the role of routine anti-HBc testing in this low-endemic context should be carefully evaluated in view of its potential benefits and drawbacks. Donor-based surveillance is a valuable tool for evaluating long-term vaccine effectiveness and guiding public health policy. Full article

Microfluidic chips made of polydimethylsiloxane (PDMS) have shown significant application potential in aquatic environments with high microbial density, such as “marine ranches”, due to their high-throughput, high-efficiency and high-precision detection capabilities. This technology can rapidly identify pathogenic microorganisms or harmful particles in aquaculture systems, thereby providing urgently needed innovative methods for implementing preventive measures and enhancing aquaculture productivity. By regulating the micro-nano scale channel structure, microfluidic technology can precisely control fluid flow patterns, offering new insights and effective solutions for microbiological research and the separation and analysis of particulate matter. This paper first provides a concise overview of the application of microfluidic chip technology in the analysis of marine microorganisms. Subsequently, it focuses on the “compliance” phenomenon in PDMS-based microfluidic systems, systematically reviewing the potential mechanisms, latest progress and impacts of compliance behavior in mechanically elastic materials such as PDMS. Additionally, this article also investigates the role of “compliance” in key processes of microfluidic technology application, including the capture, separation, enrichment and detection of microorganisms and particles. Moreover, the relationship between surface wettability engineering and compliance phenomena is also explored. We believe that this review will contribute to enhancing the understanding and control of the mechanical behavior of microfluids and the particles they carry within microfluidic systems, providing valuable theoretical insights and practical guidance for researchers in this field. Full article

Composites are essential materials in a wide range of industrial and medical applications due to their unique functional properties. One of the main issues of composites arises at their end-of-life stage, especially in terms of the recyclability process and its quantitative evaluation. In this study, we present a quantitative methodology for assessing the quality of composite recycling, using a paraffin-based microcomposite with the addition of tungsten particles (at one concentration 50 wt.%) as an example. Our approach combines visible-light microscopy with digital image processing techniques to obtain quantitative metrics related to recycling efficiency. The tools utilized—recognized as relatively common and uncomplicated for use in various scientific fields—have shown that the value of average particle density significantly decreased from a primary value of 43.30% to 8.30%. Consequently, the presented results confirm the usefulness of the method for the quantitative assessment of the quality of the recycling process. Full article

Osteoporosis is a common skeletal disease characterized by decreased bone density, leading to bone fragility and fractures, especially in menopausal women. The purpose of this study is to confirm the anti-osteoporosis activity of stem cell extracellular vesicles (EVs) as a material of regenerative medicine. Mesenchymal stem cells have a potential to differentiate into osteocytes, so directly reconstruct bone tissue or facilitate bone regeneration via paracrine effects. Paracrine effects are mediated by functional molecules delivered in EVs released from stem cells. EVs containing high concentrations of growth factors (GFs) and neurotrophic factors (NFs) were attained via hypoxia culture of human amniotic membrane stem cells (AMSCs). From the EVs with a mean diameter of 77 nm, 751 proteins and 15 species of lipids were identified. Sprague-Dawley rats were ovariectomized, and eight weeks later, intravenously injected with EVs at doses of 1 × 10⁸, 3 × 10⁸ or 1 × 10⁹ particles/100 μL/body, weekly for eight weeks. One week after the final administration, the serum and bone parameters related to bone density were analyzed. Serum 17β-estradiol, alkaline phosphatase, and calcium levels that decreased in ovariectomized rats were restored by EVs in a dose-dependent manner. Bone parameters such as bone mineral density, bone mineral content, bone volume/tissue volume ratio, trabecular number, trabecular space, and bending strength were also improved by treatment with EVs. Such effects were confirmed by morphological findings of micro-computed tomography. Taken together, it is suggested that AMSC-EVs containing high concentrations of GFs and NFs preserve bone soundness by promoting bone regeneration and inhibiting bone resorption. Full article

This research evaluates the stabilization of a clay collected from the northern expansion zone of Cartagena de Indias, Colombia. Laboratory analyses, including particle size distribution, Atterberg limits, compaction, specific gravity, and XRF/XRD, classified the soil as a highly plastic clay (CH) with moderate dispersivity, as confirmed by pinhole and crumb tests. The soil was treated with 3–9% lime, with and without the addition of NaCl (0% and 2%), and tested for unconfined compressive strength (q_u), small-strain stiffness (G_o), and microstructural properties under curing periods of 14 and 28 days at two compaction densities. Results showed that lime significantly improved mechanical behavior, while the inclusion of NaCl further enhanced q_u (up to 185%) and G_o (up to 3-fold), particularly at higher lime contents and curing times. Regression models demonstrated that both q_u and G_o follow power-type relationships with the porosity-to-lime index, with consistent exponents (−4.75 and −5.23, respectively) and high coefficients of determination (R² > 0.79). Normalization of the data yielded master curves with R² values above 0.90, confirming the robustness of the porosity-to-lime framework as a predictive tool. The G_o/q_u ratio obtained (3737.4) falls within the range reported for cemented geomaterials, reinforcing its relevance for comparative analysis. SEM observations revealed the transition from a porous, weakly aggregated structure to a dense matrix filled with C–S–H and C–A–H gels, corroborating the macro–micro correlation. Overall, the combined use of lime and NaCl effectively converts dispersive clays into non-dispersive, mechanically improved geomaterials, providing a practical and sustainable approach for stabilizing problematic coastal soils in tropical environments. Full article

Flotation separation of fluorite and calcite, by adding AWG (acidified water glass) as inhibitor and NaOL (sodium oleate) as collector, has been investigated by means of micro-flotation tests, flotation solution chemistry, zeta potential measurements, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) in this study. The micro-flotation results demonstrate that NaOL exhibits strong collecting power toward both fluorite and calcite, making effective separation of the two minerals unachievable in the absence of depressants. When AWG is applied as a depressant, it shows selective depression toward calcite, while exhibiting little effect on fluorite. Solution chemistry analysis, contact angle measurements, zeta potential measurements, FTIR, and XPS analyses collectively confirm that AWG can adsorb onto the calcite surface, but not onto fluorite. This adsorption prevents NaOL from interacting with the calcite surface. In contrast, the absence of AWG adsorption on fluorite allows NaOL to freely adsorb and thereby collect fluorite particles. Full article

Hybrid polysaccharide-based aerogels offer significant potential as advanced drug delivery platforms due to their tunable structure, high porosity, and biocompatibility. In this study, aerogel microparticles were synthesized using alginate, pectin, carrageenan, and their hybrid formulations via an emulsion–gelation technique followed by supercritical fluid CO₂ extraction. The resulting aerogels exhibit mesoporous structures with specific surface areas ranging from 324 to 521 m²/g and pore volumes between 1.99 and 3.75 cm³/g. Comprehensive characterization (SEM, gas sorption, XRD, TGA, DSC, and FTIR) confirmed that hybridization improved morphological uniformity and thermal stability compared to single polymer aerogels. Ibuprofen was used as a model drug to evaluate loading efficiency and release kinetics. Among all formulations, the alginate/carrageenan (2:1) hybrid showed the highest drug loading efficiency (93.5%) and a rapid release profile (>90% within 15 min), closely matching the performance of commercial ibuprofen tablets. Drug release followed Fickian diffusion, as confirmed by the Korsmeyer–Peppas model (R² > 0.99). These results highlight the potential of hybrid polysaccharide aerogels as vehicles for drug delivery and other fast-acting therapeutic applications. Full article

Driven by the growing demand for sustainable resource utilization, the recovery of valuable constituents from spent lithium-ion batteries (LIBs) has attracted considerable attention, whereas conventional recycling processes remain energy-intensive, inefficient, and environmentally detrimental. Herein, an efficient and environmentally benign separation strategy integrating dielectrophoresis (DEP) and magnetophoresis (MAP) is proposed for isolating the primary components of “black mass” from spent LIBs, i.e., lithium iron phosphate (LFP) and graphite microparticles. A coupled electric–magnetic–fluid dynamic model is established to predict particle motion behavior, and a custom-designed microparticle separator is developed for continuous LFP–graphite separation. Numerical simulations are performed to analyze microparticle trajectories under mutual effects of DEP and MAP and to evaluate the feasibility of binary separation. Structural optimization revealed that the optimal separator configuration comprised an electrode spacing of 2 mm and a ferromagnetic body length of 5 mm with 3 mm spacing. Additionally, a numerical study also found that an auxiliary flow velocity ratio of 3 resulted in the best particle focusing effect. Furthermore, the effects of key operational parameters, including electric and magnetic field strengths and flow velocity, on particle migration were systematically investigated. The findings revealed that these factors significantly enhanced the lateral migration disparity between LFP and graphite within the separation channel, thereby enabling complete separation of LFP particles with high purity and recovery under optimized conditions. Overall, this study provides a theoretical foundation for the development of high-performance and environmentally sustainable LIBs recovery technologies. Full article

This study explores the formulation of chitosan microparticles through ionic gelation and presents detailed physicochemical characterization, release studies, and the utility and potential uses for drug delivery. Three formulations were prepared under rate-controlled conditions (stirring at 800 rpm and pH maintained at 4.6) with and without stabilizers to examine the effects of formulation parameters on particle morphology and structural stability. To determine different structural and chemical characteristics, Attenuated Total Reflectance Fourier-Transform Infrared spectroscopy (ATR–FTIR), Scanning Electron Microscopy (SEM), and dynamic light scattering (DLS) were utilized, which confirmed that the particles formed and assessed size distribution and structural integrity. Atomic force microscopy (AFM) was used to quantify surface roughness and potential nanomechanical differences that may derive from the use of different modifiers. Coformulation of bovine serum albumin (BSA) permitted assessment of encapsulation efficiency and drug release capacity. Based on in vitro release evidence, the protein released at a different rate, and the dispersion of formulations under physiological conditions (PBS, pH 7.4, 37 °C) confirmed the differences in stability between formulations. The tunable physical characteristics, mild fabrication conditions, and controlled drug release demonstrated that the chitosan particles could have useful relevance as a substrate for localized drug delivery and as a bioactive scaffold for tissue regenerative purposes. Full article