Search Results (168)

The management of complex acute and chronic wounds remains a formidable challenge in modern medicine, underscoring the urgent need for advanced therapeutic strategies that accelerate healing, prevent infection, and promote functional tissue regeneration. Electrospun nanofibers have attracted considerable attention in the biomedical field due to their extracellular matrix-like architecture, high surface area, interconnected porosity, and tunable physicochemical composition, which drive advances in wound regeneration, tissue engineering, and biopolymer-based therapeutics. In wound healing, nanofibrous dressings composed of natural polymers such as chitosan, gelatin, collagen, and cellulose promote cell attachment and proliferation, support angiogenesis, and enable infection control while delivering bioactive agents, thereby addressing significant challenges related to inflammation, biocompatibility, and antimicrobial resistance. In tissue engineering, aligned and hierarchically organized scaffolds fabricated from biopolymers such as collagen, gelatin, chitosan, and cellulose enhance the guided orientation of cells, differentiation, and functional regeneration of neural, musculoskeletal, vascular, and skin tissues. In addition to their conventional regenerative applications, recent studies have demonstrated that electrospun biopolymer nanofibers can be used in multifunctional biomedical platforms, including smart and stimuli-responsive systems for drug delivery, biosensing, regenerative interfaces, and wearable medical technologies. The integrated constructs that incorporate diagnostic or therapeutic functionalities, hybrid fabrication approaches that combine 3D printing with electrospinning, and intelligent biopolymer frameworks that enable telemedicine, real-time physiological monitoring, and personalized regenerative therapies offer new opportunities for developing improved biomedical systems. Overall, these advances position electrospun nanofiber systems as promising biomaterials for next-generation biomedical innovation. This review summarizes recent progress in tissue-engineered scaffolds, wound dressings, fabrication strategies for integrative therapeutics, and wearable devices with transformative potential for biomedical applications. Finally, the review addresses significant challenges related to scalability and clinical translation. It offers perspectives on future directions, including the integration of artificial intelligence and the regeneration of complex skin appendages, which will shape the next generation of nanofiber-based wound-healing therapies. Full article

To enhance the functionality of collagen (Coll)-based scaffolds, we developed a double-crosslinking strategy incorporating an electroconductive chitosan (Ch) and polypyrrole (Ppy) composite. Successful pre-crosslinking of Ch and Ppy was achieved using glutaraldehyde (GTA) at 100 µM. This facilitated imine linkage formation, confirmed by FTIR, enabling synergistic integration with Coll and successful nanofiber scaffold fabrication via electrospinning. While increasing the Ch-Ppy-GTA ratio affected the spinning process and higher GTA concentrations compromised fiber homogeneity, all other measured properties generally improved with increasing ratios. Crucially, this methodology allowed the membranes to maintain their morphology and significantly extended their degradation profile up to 20–30 days in PBS medium at 37 °C. Furthermore, the scaffolds exhibited electroactivity characterized by pseudocapacitance in the presence of Na⁺ and Ca²⁺ ions. These findings demonstrate a robust, tunable method for creating electroactive and structurally stable nanofiber scaffolds suitable for advanced tissue engineering. Full article

Flexible supercapacitors have attracted significant attention as promising power sources for portable and wearable electronic devices. However, achieving simultaneous high power density, energy density and long-term cyclic stability in a simple device configuration remains a critical challenge. Herein, we report an all-solid-state flexible planar supercapacitor based on hierarchically structured cellulose nanofiber-carbon nanotube@manganese dioxide (CNF-CNT@MnO₂) composite aerogels. The electrode architecture is rationally designed by first dispersing CNTs within a hydrophilic CNF scaffold to form a conductive three-dimensional network, followed by in situ oxidative polymerization of MnO₂ onto the CNF-CNT fibrous skeleton. The hydrophilic CNFs network ensures thorough electrolyte penetration, the interconnected CNTs facilitate rapid electron transport, and the uniformly coated MnO₂ layer provides substantial pseudocapacitance. The aerogel electrode with a low density of 14.6 mg cm⁻³ and a high specific surface area of 214.4 m² g⁻¹ delivers a specific capacitance of 273.0 F g⁻¹ at 0.4 A g⁻¹. The assembled planar supercapacitor, incorporating gel electrolyte and a flexible hydrogel substrate, achieves an impressive areal capacitance of 885.0 mF cm⁻² at 2 mA cm⁻², energy density of 122.9 μWh cm⁻² and corresponding power density of 1000.0 μW cm⁻². The device exhibits excellent electrochemical stability, retaining 83.3% capacitance after 2500 charge–discharge cycles, and outstanding mechanical flexibility, with 96.3% capacitance retention after 200 repeated bending cycles. Furthermore, multiple devices can be connected in series or parallel to proportionally increase output voltage or current, meeting the practical power requirements of electronic applications. This work offers a viable pathway toward high-performance, durable energy storage solutions for next-generation wearable electronics. Full article

The design of multifunctional biomaterials that offer both structural support and biochemical cues is essential for enhancing tissue regeneration. In this study, hybrid nanofibrous scaffolds composed of poly(L-lactide-co-ε-caprolactone) (PLCL) and bioactive factors secreted by Wharton’s jelly-derived mesenchymal stem cells (WJ-MSCs) were fabricated via co-electrospinning. Nanofibers were produced in aligned and random configurations following an optimized protocol developed at the Institute for Bioengineering of Catalonia (IBEC). Their morphology and topography were characterized by light microscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM), and fiber orientation was quantified via Fast Fourier Transform (FFT) analysis. The scaffolds showed fiber diameters of 542.9 ± 62.3 nm, with aligned fibers predominantly oriented within 20° of the principal axis. Human AD-MSCs were used to assess biocompatibility and cell–material interactions. Aligned and random nanofiber architectures elicited distinct cellular responses. AD-MSCs on aligned fibers exhibited smaller spreading areas (~320 μm²) vs. on random nanofibers (~500 μm²) and substantially higher proliferation, resulting in a shorter cell-doubling time (~25 h) than those on random nanofibers (~130 h) or control substrates (~70 h). In addition, aligned nanofibers promoted markedly faster migration, reaching rates of ~5000 μm²/h surface coverage, compared with random nanofibers (~770 μm²/h) and controls (~1800 μm²/h). Together, the results show that nanofiber alignment and biochemical functionalization jointly influence MSC behavior and improve regeneration, highlighting the potential of these PLCL-based hybrid secretome/PLCL nanofibers for advanced wound healing. Full article

Optimizing nanofiber morphology is essential for promoting osteoblast elongation and supporting bone regeneration. This study aimed to develop a machine-learning framework capable of predicting optimal scaffold architectures directly from scanning electron microscopy (SEM) images and chemical composition. A four-module pipeline was implemented, combining tile-based SEM preprocessing, Cellpose-based cell morphology extraction with edge correction, ensemble machine-learning models, and an end-to-end convolutional neural network (CNN). Cellular quality was quantified using an elongation-weighted metric to emphasize morphological maturity over cell number. The analysis revealed consistent structure–function relationships across samples, with Sample_5 achieving the highest quality score at the 72 h time point. Ensemble models reached an R² of 0.400, while the end-to-end CNN achieved an R² of 0.750, indicating that raw SEM texture provides additional predictive information beyond handcrafted features. Feature-importance analysis identified nonlinear MgO effects and synergistic interactions between MgO and gold nanoparticles as key determinants of cell morphology. These findings demonstrate that the integrated workflow can reliably identify morphology–chemistry combinations favorable for osteoblast performance and provide a foundation for data-driven scaffold optimization. The approach supports rational design of nanofibrous biomaterials and may facilitate future development of intelligent scaffolds for bone regeneration applications. Full article

Spinal cord injury (SCI) remains a major clinical challenge due to the limited regenerative capacity of the central nervous system (CNS). Effective scaffolds for repair must combine mechanical compatibility with host tissue, controlled degradation matching the time course of regeneration, and microarchitectural features that promote neuronal survival. Electrospun nanofibrous scaffolds mimic the structural and mechanical features of the extracellular matrix, providing critical cues for neuronal adhesion and glial modulation in neural regeneration. Here, we fabricated biodegradable poly(lactic acid)/poly(ε-caprolactone) (PLA/PCL) scaffolds using a dichloromethane/tetrahydrofuran (DCM/THF) solvent system to induce surface porosity via solvent-driven phase separation. The DCM/THF solvent system formulation produced nanofibers with porous surfaces and increased area for cell interaction. PLA/PCL scaffolds showed a Young’s modulus of ~26 MPa and sustained degradation, particularly under oxidative conditions simulating the post-injury microenvironment. In vitro, these scaffolds enhanced neuronal density up to fivefold and maintained ~80% viability over 10 days in primary neuron–glia cultures. Morphometric analysis revealed that DCM/THF-based scaffolds supported astrocytes with preserved process complexity and reduced circularity, indicative of a less reactive morphology. In contrast, scaffolds fabricated with 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) displayed reduced bioactivity and promoted morphological features associated with astrocyte reactivity, including cell rounding and process retraction. These findings demonstrate that solvent-driven control of scaffold microarchitecture is a powerful strategy to enhance neuronal integration and modulate glial morphology, positioning DCM/THF-processed PLA/PCL scaffolds as a promising platform for CNS tissue engineering. Full article

Tendon injuries, whether resulting from trauma, repetitive strain, or degenerative conditions, present a considerable clinical challenge. The natural healing process, which involves inflammatory, proliferative, and remodeling phases, is often inefficient and leads to excessive scar tissue formation, ultimately compromising the mechanical properties of the tendon compared to its native state. This highlights the critical need for innovative approaches to enhance tendon repair and regeneration. Leveraging the regenerative properties of human amniotic membrane (HAM) and electrospun PCL/gelatin nanofibers, this study aims to develop and assess a novel composite scaffold in a rodent model to facilitate improved tendon healing. This prospective experimental study involved 12 male Sprague Dawley rats (250–300 g), randomly assigned to three groups: Group A (No Treatment/No HAM), Group B (HAM-treated), and Group C (HAM with electrospun nanofibers, HAM-NF). A surgically induced tendon injury was created in the left hind limb, while the right limb served as a control. Following surgery, HAM and HAM-NF (0.5 cm²) were applied to the respective treatment groups, and tendon healing was assessed after six weeks. Gait analysis, including stride length and toe-out angle, was conducted both pre-operatively and six weeks post-operatively. Macroscopic and microscopic evaluations were performed on harvested tendons to assess regeneration, comparing treated groups to the controls. Gait analysis demonstrated that the HAM-NF group showed a significant increase in stride length from 11.70 ± 1.50 cm to 12.79 ± 1.71 cm (p < 0.05), with only a modest change in toe-out angle (14.58 ± 2.96° to 16.27 ± 2.20°). In contrast, the No Treatment group exhibited reduced stride length (10.27 ± 2.17 cm to 8.40 ± 1.67 cm) and a marked increase in toe-out angle (16.33 ± 4.51° to 26.47 ± 5.81°, p < 0.05), while the HAM-only group showed mild changes in both parameters. Macroscopic evaluation showed a significant difference in tendon healing. HAM-NF group had the highest score that indicates more rapid tissue regeneration. Histological analysis after 6 weeks showed that tendons treated with HAM-NF achieved a mean histological score of 5.54 ± 4.14, closely resembling the uninjured tendon (6.67 ± 1.63), indicating substantial regenerative potential. The combination of human amniotic membrane (HAM) and electrospun nanofibers presents significant potential as an effective strategy for tendon regeneration. The HAM/NF group exhibited consistent improvements in gait parameters and histological outcomes, closely mirroring those of uninjured tendons. These preliminary results indicate that this biomaterial-based approach can enhance both functional recovery and structural integrity, providing a promising pathway for advanced tendon repair therapies. Full article

Electrospinning of poly(lactic acid) (PLA) commonly relies on toxic organic solvents, which limit its sustainability and biomedical applicability. In this work, a green electrospinning process was developed using dimethyl carbonate (DMC), a biodegradable and low-toxicity solvent, combined with acetone as a volatile co-solvent to promote efficient jet solidification. Three commercial PLA grades were evaluated for solubility and spinnability, and PLA 4043D was identified as the most suitable for DMC and acetone systems. The electrospinning parameters, including solvent ratio, flow rate, and applied voltage, were systematically optimized to achieve stable jet formation and uniform fiber morphology. Under optimized conditions, the process produced continuous, bead-free nanofibers with a mean diameter of ~1 µm and uniform nanoscale surface porosity resulting from differential solvent evaporation. The resulting fibers were characterized in terms of morphology, structure, thermal behavior, and mechanical performance, confirming increased amorphous content, high porosity (about 78%), and tensile strength of ~3 MPa for the selected electrospinning condition. This study demonstrates that DMC-based solvent systems enable a sustainable and potentially biocompatible route, considering the lower toxicity of the solvents employed, offering a green alternative to conventional toxic processes for the fabrication of medical scaffolds. Full article

Musculoskeletal injuries involving volumetric muscle loss remain difficult to treat due to limited regenerative capacity and the lack of physiologically relevant experimental models. This study introduces a computer-controlled ex vivo mouse hindlimb culturing platform that applies dynamic mechanical loading to evaluate muscle regeneration in a critical-size tibialis anterior (TA) defect. The defect was treated with an injectable myoblast-laden nanofibrous scaffold composed of polycaprolactone nanofibers and collagen (PNCOL). The ex vivo mouse hindlimb culturing platform maintained tissue viability and transmitted physiological strain across bone and muscle without disrupting the unity of the bone–muscle structure. PNCOL treatment under mechanical loading enhanced muscle fiber organization, extracellular matrix regeneration, and anti-inflammatory responses (CD206) while upregulating paired box 7 (PAX7), myogenic factor 5 (MYF5), myogenic regulatory factor 4 (MRF4), and transforming growth factor beta1 (TGFβ1) expression. Cytokine profiling revealed an anabolic shift involving wingless/integrated (WNT) and insulin-like growth factor-1 (IGF-1) signaling, indicating a pro-regenerative microenvironment. Overall, the combination of mechanical stimulation and biomaterial-based therapy significantly improved muscle regeneration within a controlled ex vivo model. This multidimensional approach provides a reproducible and ethical platform that advances musculoskeletal regenerative research while reducing animal use. Full article

Bioengineered functional salivary tissues can advance regenerative therapies, preclinical drug testing, and the fundamental understanding of salivary gland dysfunction. Current salivary tissue models are typically Matrigel-based, hydrogel-based or scaffold-free organoid systems, with limited physiological relevance or mimicry of cell-cell and cell-extracellular matrix (ECM) interactions. We previously developed elastin-alginate cryoelectrospun scaffolds (CES) that resemble the topography and viscoelastic properties of healthy salivary ECM, and validated their potential for stromal cell culture, delivery, and in vitro fibrosis modeling. Here, we evaluated the utility of CES to support 3D cocultures of salivary gland epithelial and mesenchymal cells in vitro. We compared CES with honeycomb-like topography (CES-H) to densely packed electrospun nanofibers (NFs) and CES with fibrous topography (CES-F) for their ability to support SIMS epithelial cell attachment, morphology, 3D clustering, phenotype and organization into distinct clusters when cocultured with stromal cells. Both CES-F and CES-H supported epithelial cell attachment and clustering; in particular, CES-H most effectively supported the self-organization of epithelial and stromal cells into distinct 3D clusters resembling the structure of native salivary tissue. Stromal cells were essential for maintaining the phenotype of epithelial cells cultured on CES-H, laying the foundation for the development of in vitro tissue models. Full article

Over the past two decades, the meat industry has faced increasing pressure to prevent foodborne outbreaks and reduce economic losses associated with delayed detection of spoilage. This demand has accelerated the development of on-site, real-time sensing tools capable of identifying early signs of contamination. Electrospun nanofiber (NF) platforms have emerged as particularly promising due to their large surface area, tunable porosity, and versatile chemistry, which make them ideal scaffolds for immobilizing enzymes, antibodies, or aptamers while preserving bioactivity under field conditions. These NFs have been integrated into optical, electrochemical, and resistive devices, each enhancing response time and sensitivity for key targets ranging from volatile organic compounds indicating early decay to specific bacterial markers and antibiotic residues. In practical applications, NF matrices enhance signal generation (SERS hotspots), facilitate analyte diffusion through three-dimensional networks, and stabilize delicate biorecognition elements for repeated use. This review summarizes major NF fabrication strategies, representative sensor designs for meat quality monitoring, and performance considerations relevant to industrial deployment, including reproducibility, shelf life, and regulatory compliance. The integration of such platforms with data networks and Internet of Things (IoT) nodes offers a path toward continuous, automated surveillance throughout processing and cold-chain logistics. By addressing current technical and regulatory challenges, NF-based biosensors have the potential to significantly reduce waste and safeguard public health through early detection of contamination before it escalates into costly recalls. Full article

Cell population and vascular vessel distribution analysis in membrane-based scaffolds for tissue engineering is crucial. Biomimetic nanostructured membranes of methyl methacrylate/hydroxyethyl methacrylate and methyl acrylate/hydroxyethyl acrylate (MMA)1-co-(HEMA)1/(MA)3-co-(HEA)2 loaded with 5% wt SiO2-nanoparticles (Si-M) were doped with zinc (Zn-M) or doxycycline (Dox-M). Critical bone defects were effectuated on six New Zealand-bred rabbit skulls and then they were covered with the membrane-based scaffolds. After six weeks, bone cell population in terms of osteoblasts, osteoclasts, osteocytes, fibroblasts, and M1 and M2 macrophages and vasculature was determined. The areas of interest were the space above (over) and below (under) the membrane, apart from the interior (inner) compartment. All membranes showed that vasculature and most cell types were more abundant under the membrane than in the inner or above regions. Quantitatively, osteoblast density increased by approximately 35% in Zn-M and 25% in Si-M compared with Dox-M. Osteoclast counts decreased by about 78% in Dox-M, indicating strong inhibition of bone resorption. Vascular structures were nearly twofold more frequent under the membranes, particularly in Si-M, while fibroblast presence remained moderate and evenly distributed. The M1/M2 macrophage ratio was higher in Zn-M, reflecting a transient pro-inflammatory state, whereas Dox-M favored an anti-inflammatory, pro-regenerative profile. These results indicate that the biomimetic electrospun membranes functioned as architectural templates that provided favorable microenvironments for cell colonization, angiogenesis, and early bone regeneration in a preclinical in vivo model. Zn-M membranes appear suitable for early osteogenic stimulation, while Dox-M membranes may be advantageous in clinical contexts requiring modulation of inflammation and osteoclastic activity. Full article

The development of advanced wound dressings that integrate favorable physico-mechanical properties with the ability to support physiological healing processes remains a critical challenge in biomaterials science. An ideal dressing should modulate the wound microenvironment, prevent infection, maintain hydration, and possess adequate strength and elasticity. This study aimed to fabricate and characterize electrospun chitosan (CS)-based 3D scaffolds dual-reinforced with halloysite nanotubes (HNTs) and cerium oxide nanoparticles (CeONPs) to enhance material properties and biological performance. HNTs were incorporated to improve electrospinnability and provide mechanical reinforcement, while CeONPs were added for their redox-modulating and anti-inflammatory activities. Composite mats were fabricated via non-capillary electrospinning. The individual and synergistic effects of HNTs and CeONPs were systematically evaluated using physico-chemical methods (SEM, EDX, WAXS, TGA, mechanical testing) and biological assays (in vitro cytocompatibility with mesenchymal stem cells, in vivo biocompatibility, and wound healing efficacy in a rat model). Scaffolds containing only HNTs exhibited defect-free nanofibers with an average diameter of 151 nm, whereas the dual-filler (CS-PEO-HNT-CeONP) composites showed less uniform fibers with a rough surface and a larger average diameter of 233 nm. The dual-filler system demonstrated significantly enhanced mechanical properties, with a Young’s modulus nearly double that of pure CS mats (881 MPa vs. 455 MPa), attributed to strong interfacial interactions. In vivo, the CS-PEO-HNT-CeONP scaffolds degraded more slowly, promoted earlier formation of a connective tissue capsule, and elicited a reduced inflammatory response compared to single-filler systems. Although epithelialization was temporarily delayed, the dual-filler composite ultimately facilitated superior tissue regeneration, characterized by a more organized, native-like collagen architecture. The synergistic combination of HNTs and CeONPs within a CS matrix yields a highly promising scaffold for wound management, offering a unique blend of tailored biodegradability, enhanced mechanical strength, and the ability to guide healing towards a regenerative rather than a fibrotic outcome, particularly for burns and traumatic injuries. Full article

Wound healing remains a significant clinical challenge due to antibiotic-resistant pathogens, persistent inflammation, oxidative stress, and impaired tissue regeneration. Conventional therapies are often inadequate, necessitating alternative strategies. Plant bioactive compounds, including flavonoids, tannins, terpenoids, and alkaloids, offer antimicrobial, anti-inflammatory, antioxidant, and pro-angiogenic properties that directly address these challenges in wound healing therapy. However, their poor solubility, instability, and rapid degradation at the wound site limit clinical translation. Biomaterial-based scaffolds such as hydrogels, electrospun nanofibers, lyophilized dressings, and 3D-bioprinted constructs have emerged as promising delivery platforms to enhance bioavailability, stability, and sustained release of bioactive compounds while providing structural support for cell adhesion, proliferation, and tissue repair. This review was conducted through a structured literature search using PubMed, Scopus, and Web of Science databases, covering studies published between 1998 and 2025, with keywords including wound healing, phytochemicals, plant bioactive compounds, scaffolds, hydrogels, electrospinning, and 3D bioprinting. The findings highlight how incorporation of plant bioactive compounds onto scaffolds can combat resistant microbial infections, mitigate oxidative stress, promote angiogenesis, and accelerate tissue regeneration. Despite these promising outcomes, further optimization of scaffold design, standardization of bioactive formulations, and translational studies are needed to bridge laboratory research with clinical applications for next generation wound healing therapies. Full article

Titanium dioxide (TiO₂), owing to its excellent photocatalytic performance and environmental friendliness, holds great potential in the remediation of water pollution. In this study, we introduce a green and facile strategy to fabricate TiO₂-based hybrid aerogels, in which the peptide FQFQFIFK first self-assembles into peptide nanofibers (PNFs), followed by in situ biomineralization of TiO₂ on the PNFs. The TiO₂-loaded PNFs are then combined with graphene oxide (GO) via π–π interactions and integrated with microcrystalline cellulose (MCC) to construct a stable three-dimensional (3D) porous framework. The resulting GO/MCC/PNFs-TiO₂ aerogels exhibit high porosity, low density, and good mechanical stability. Photocatalytic experiments show that the aerogels efficiently degrade various organic dyes (methylene blue, rhodamine B, crystal violet, and Orange II) and antibiotics (e.g., tetracycline) under visible-light irradiation, achieving final degradation efficiencies higher than 90%. The excellent performance is attributed to the synergistic effect of the ordered interface provided by the PNF template, the stabilization and uniform dispersion facilitated by GO, and the mechanically robust 3D scaffold constructed by MCC. This work provides an efficient and sustainable strategy for designing functional hybrid aerogels and lays a foundation for their application in water treatment and environmental remediation. Full article