Search Results (115)

The newly discovered Yanshan gold deposit within the Qixia–Penglai mineralization belt is situated within the Daliuhang goldfield of Daliuhang Town, approximately 45 km southeast of Penglai City, the Jiaodong Peninsula. Quartz-vein–type gold orebodies are mainly distributed among the Guojialing granite and are controlled by NNE-trending faults. Native gold primarily occurs within the interiors of pyrite grains, forming inclusion gold and fracture gold. In this study, LA-ICP-MS zircon U-Pb dating and in situ sulfur isotope analysis of gold-bearing pyrite were conducted to constrain the ore genesis of the Yanshan gold deposit. Guojialing monzogranite and porphyritic granodiorite yielded weighted mean ²⁰⁶Pb/²³⁸U ages of 130 ± 2 Ma (MSWD = 1.8) and 131 ± 2 Ma (MSWD = 1.8), respectively, indicating that magmatism and gold mineralization occurred during the Early Cretaceous period. The in situ sulfur δ³⁴S values of euhedral crystalline pyrite (Py1) formed in the early stage ranged from 3.21% to 5.35‰ (n = 11), while the in situ sulfur δ³⁴S values of pyrite (Py2) formed in the later stage ranged from 6.32‰ to 9.77‰ (n = 10), suggesting that the sulfur of the Yanshan gold deposit primarily originates from magmatism, with contamination from stratigraphic materials. Granitoids are highly likely to provide the thermal drive for fluid activity; however, the origins of the fluids and ore-forming materials remain difficult to determine. Based on geological features, geochronological data, and in situ sulfur isotopic analysis, this study concludes that the Yanshan gold deposit is a mesothermal magmatic hydrothermal vein-type gold deposit. The mineralization of the Yanshan gold deposit is related to the subduction of the Mesozoic Paleo-Pacific Plate beneath the Eurasian continent and is mainly controlled by steep dip faults. This study provides theoretical guidance for further exploration and prospecting of the Yanshan gold deposit. Full article

Stylolites, common dissolution surfaces in carbonate rocks, form due to localized stress-induced pressure-solution during burial compaction or tectonic contraction. Their morphology and growth are influenced by dissolution kinetics, rock heterogeneity, clay content, burial depth, stress evolution, diagenesis, and pore fluid availability. This study applies the stylolite roughness inversion technique (SRIT), a proven paleopizometer that quantifies the principal vertical stress (σ_v = σ₁) prevailing in strata in the last moments of bedding-parallel stylolites (BPS) formation, to the Late Cretaceous Bagh Group carbonates in the Narmada Basin, India, to estimate their burial paleo-depth. Using the Fourier Power Spectrum (FPS), we obtained 18 σ₁ values from a collection of 30 samples, enabling us to estimate paleo-burial depths for the Bagh Group ranging from 660 to 1320 m. As the Bagh Group burial history is unknown, but as there is no subsequent sedimentary deposition above it, we relate this ca. 1.3 km burial depth to the now eroded thickness of the deposits related to Deccan volcanism at the end of the Cretaceous time, implying a quasi-instantaneous development of the BPS population in the strata. This research highlights the robustness of SRIT for reconstructing burial histories in carbonate sequences and that it can be a reliable way to reconstruct the thickness of eroded deposits in well-constrained geological history. Full article

The Aptian–Albian interval represents a significant cooling phase within the Cretaceous “hothouse” climate, marked by dynamic climatic fluctuations. High-resolution continental records are essential for reconstructing terrestrial climate and ecosystem evolution during this period. This study examines a lacustrine-dominated succession of the Shahezi Formation (Lishu Rift Depression, Songliao Basin, NE Asia) to access paleo-weathering intensity and paleoclimate variability between the Middle Aptian and Early Albian (c. 118.2–112.3 Ma). Multiple geochemical proxies, including the Chemical Index of Alteration (CIA), were applied within a sequence stratigraphic framework covering four stages of lake evolution. Our results indicate that a hot and humid subtropical climate predominated in the Lishu paleo-lake, punctuated by transient cooling and drying events. Periods of lake expansion corresponded to episodes of intense chemical weathering, while two distinct intervals of aridity and cooling coincided with phases of a reduced lake level and fan delta progradation. To address the impact of potassium enrichment on CIA values, we introduced a rectangular coordinate system on A(Al₂O₃)-CN(CaO* + Na₂O)-K(K₂O) ternary diagrams, enabling more accurate weathering trends and CIA corrections (CIA_corr). Uncertainties in CIA correction were evaluated by integrating geochemical and petrographic evidence from deposits affected by hydrothermal fluids and external potassium addition. Importantly, our results show that metasomatic potassium addition cannot be reliably inferred solely from deviations in A-CN-K diagrams or the presence of authigenic illite and altered plagioclase. Calculations of “excess K₂O” and CIA_corr values should only be made when supported by robust geochemical and petrographic evidence for external potassium enrichment. This work advances lacustrine paleoclimate reconstruction methodology and highlights the need for careful interpretation of weathering proxies in complex sedimentary systems. Full article

In order to clarify the pore evolution and coupling characteristics with hydrocarbon charging in the deep-buried ultra-tight sandstone reservoirs of the second member of Xujiahe Formation (hereinafter referred to as the Xu 2 Member) on the eastern slope of the Western Sichuan Depression, this study integrates burial history and thermal history with analytical methods including core observation, cast thin section analysis, scanning electron microscopy, carbon-oxygen isotope analysis, and fluid inclusion homogenization temperature measurements. The Xu 2 Member reservoirs are predominantly composed of lithic sandstones and quartz-rich sandstones, with authigenic quartz and carbonates as the main cementing materials. The reservoir spaces are dominated by intragranular dissolution pores. The timing of reservoir densification varies among different submembers. The upper submember underwent compaction during the Middle-Late Jurassic period due to the high ductility of mudstone clasts and other compaction-resistant components. The middle-lower submembers experienced densification in the Late Jurassic period. Late Cretaceous tectonic uplift induced fracture development, which enhanced dissolution in the middle-lower submembers, increasing reservoir porosity to approximately 5%. Two distinct phases of hydrocarbon charging are identified in the Xu 2 Member. The earlier densification of the upper submember created unfavorable conditions for hydrocarbon accumulation. In contrast, the middle-lower submembers received hydrocarbon charging prior to reservoir densification, providing favorable conditions for natural gas enrichment and reservoir formation. Three sweet-spot reservoir development patterns are recognized: paleo-structural trap + (internal source rock) + source-connected fracture assemblage type, paleo-structural trap + internal source rock + late-stage fracture assemblage type, and paleo-structural trap + (internal source rock) + source-connected fracture + late-stage fracture assemblage type. Full article

The tectonic evolution of the Paleo-Pacific Ocean and the destruction mechanism of the North China Craton (NCC) are still controversial. In this study, we conducted zircon U-Pb dating, whole-rock geochemistry, and Sr-Nd-Hf isotope analyses on the Weiyuanpu mafic–ultramafic intrusions in the eastern segment of the northern margin of the NCC to discuss their petrogenesis and tectonic implications. The Weiyuanpu mafic–ultramafic intrusions consist of troctolite, hornblendite, hornblende gabbro, gabbro, and minor diorite, anorthosite, characterized by cumulate structure. The main crystallization sequence of minerals is olivine → pyroxene → magnetite → hornblende. The zircon U-Pb ages of hornblendite, hornblende grabbro, and diorite are ~170Ma. Geochemical characteristics exhibit low-K tholeiitic to calc-alkaline series, enriched in light rare-earth elements (LREE) and significant large-ion lithophile elements (LILE), and depleted in high-field-strength elements (HFSE). Sr-Nd isotopic compositions are I_Sr = 0.7043–0.7055, εNd(t) = −0.7 to +0.9, and zircon εHf (t) values range from +3.4 to +8.7. These results suggest that the source region was a phlogopite-bearing garnet lherzolite mantle metasomatized by subduction fluids. The study reveals that the northeastern margin of the NCC was in a back-arc extensional setting due to the subduction of the Paleo-Pacific Ocean during the Middle Jurassic, which caused lithosphere thinning and mantle melting in this region. Full article

The Southern Beishan Orogenic Belt (SBOB), an integral part of the Southern Central Asian Orogenic Belt (CAOB), is characterized by extensive Late Paleozoic magmatism. These igneous rocks are the key to studying the tectonic evolution process and the ocean–continent tectonic transformation in the southern margin of the CAOB and Paleo-Asian Ocean. We present zircon U-Pb chronology, in situ Lu-Hf isotopes, and whole-rock geochemistry data for Early–Middle Devonian volcanic rocks in the Sangejing Formation and granites from the Shuangyingshan-Huaniushan (SH) unit in the SBOB. The Wudaomingshiu volcanic rocks (Ca. 411.5 Ma) are calc-alkaline basalt-basaltic andesites with low SiO₂ (47.35~55.59 wt.%) and high TiO₂ (1.46~4.16 wt.%) contents, and are enriched in LREEs and LILEs (e.g., Rb, Ba, and Th), depleted in HREEs and HFSEs (Nb, Ta, and Ti), and weakly enriched in Zr-Hf. These mafic rocks are derived from the partial melting of the depleted lithosphere metasomatized by subduction fluid and contaminated by the lower crust. Wudaomingshui’s high-K calc-alkaline I-type granite has a crystallization age of 383.6 ± 2.2 Ma (MSWD = 0.11, n = 13), high Na₂O (3.46~3.96 wt.%) and MgO (1.25~1.68 wt.%) contents, and a high DI differentiation index (70.69~80.45); it is enriched in LREEs and LILEs (e.g., Rb, Ba, and Th) and depleted in HREEs and HFSEs (e.g., Nb, Ta, and Ti). Granites have variable zircon ε_Hf(t) values (−2.5~3.3) with Mesoproterozoic T_DM2 ages (1310~1013 Ma) and originated from lower crustal melting with mantle inputs and minor upper crustal assimilation. An integrated analysis of magmatic suites in the SBOB, including rock assemblages, geochemical signatures, and zircon ε_Hf(t) values (−2.5 to +3.3), revealed a tectonic transition from advancing to retreating subduction during the Early–Middle Devonian. Full article

Exploration practice has proved that preservation conditions are one of the critical factors contributing to shale gas enrichment in the Middle Yangtze area. Well Yidi2 is the discovery well of Cambrian shale gas in this area. The paleo-fluid evolution and its implication for preservation conditions of shale gas remains unclear, posing challenges for shale gas exploration and development. In this study, through systematic analysis of fluid inclusions in fractrue-filling vein of the entire core section of this well, combined with carbon and oxygen isotope tests of veins and host rocks, a paleo-fluid profile was established to explore the formation environment of Cambrian paleo-fluids and their implications for the preservation conditions of the Shuijingtuo Formation (SJT Fm.) shale gas. The results suggest that fractures in the SJT Fm. shale at the base of Cambrian Series 2 mainly formed during the deep burial hydrocarbon generation stage, trapping a large number of liquid hydrocarbon inclusions. Subsequently, numerous high-density methane inclusions and a few of gas-liquid two-phase inclusions were trapped. The SO₄²⁻, Ca²⁺ and Mg²⁺ content of fluid inclusion groups in the veins decreased from the Qinjiamiao Formation (QJM Fm.) at the bottom of Cambrian Series 3 upward and downward respectively, and the rNa⁺/rCl⁻ ratio was the lowest in the SJT Fm. and increased overall upward. The δ¹³C values of calcite veins in Tianheban Formation (THB Fm.)-Shipai Formation (SP Fm.) of the middle Cambrian Series 2 and the Loushanguan Formation (LSG Fm.) of the Cambrian Series 3 were lighter compared to the host rocks. Results indicate the later tectonic activities in this area were relatively weak, and the shale interval remained in a state of high gas saturation for a long time. The QJM Fm. was the main source of high-salinity brine, and the SJT Fm. had strong self-sealing properties and was relatively less affected by external fluids. However, the pressure evolution of high-density methane inclusions in the SJT Fm. indicated that the pressure coefficient of the shale section significantly decreased during the Indosinian uplift and erosion stage. The veins in the THB-SP and LSG Fms. were closely related to the oxidation of hydrocarbon gases by TSR (thermochemical sulfate reduction) and the infiltration of atmospheric water, respectively. Therefore, the paleo-fluid in the fractures of Well Yidi2 have integrally recorded the whole geological process including the evolution from oil to gas, the backflow of high-salinity formation water, the upward escape of shale gas, and the process of shale gas reservoirs evolving from overpressure to normal pressure. Considering that Well Yidi2 area is located in a relatively stable tectonic setting, widely distributed fracture veins probably enhance the self-sealing ability, inhibiting the rapid escape of SJT Fm. shale gas. And the rapid deposition of Cretaceous also delayed the loss of shale gas to some extent. The combination of these two factors creates favorable preservation conditions of shale gas, establishing the SJT Fm. as the primary exploration target in this area. Full article

The Yanbian area of Jilin Province is situated in the eastern segment of the southern margin of the Xing-Meng Orogenic Belt, representing a region that has been superimposed and reworked by the Paleo-Asian Ocean and Circum-Pacific tectonic event. To determine the emplacement age and petrogenesis of the quartz diorite in the Fudong area of Yanbian, Jilin Province, and to investigate its tectonic setting, petrographic studies, zircon U-Pb geochronology, whole-rock Sr-Nd isotopic analysis, zircon Hf isotopic analysis, and detailed geochemical investigations of this intrusion were carried out. The results indicate that the Fudong quartz diorite has: (1) A weighted mean zircon U-Pb age of 186 ± 1.7 Ma, corresponding to the Late Early Jurassic; (2) geochemically high concentrations of Sr (average: 1146 ppm) and Ba (average: 1213 ppm), and enrichment of light rare earth elements (LREE), along with notably high Th/Yb and Rb/Y ratios; (3) geochemically, the quartz diorite is enriched in large-ion lithophile elements (LILEs; e.g., Ba, K) and light rare earth elements (LREEs), while being depleted in high-field-strength elements (HFSEs; e.g., Ta, Ti). These features are consistent with magma formed in a subduction-related setting. In summary, the Fudong quartz diorite formed within an active continental margin tectonic environment associated with the subduction of the Paleo-Pacific Plate. Its primary magma likely originated from an enriched lithospheric mantle that had been metasomatized by fluids released from the subducted slab. Full article

Calcite in hydrocarbon reservoirs records abundant information about diagenetic fluids and environments. Understanding the formation mechanisms of calcite is crucial for predicting reservoir characteristics and hydrocarbon migration. This study identifies the types of authigenic calcite present in the Lower Paleozoic carbonate reservoirs of the Bohai Bay Basin through petrographic analysis, cathodoluminescence, and other experimental methods. By integrating electron probe microanalysis, in situ isotopic analysis, and fluid inclusion studies, we further constrain the source of the diagenetic fluids responsible for the authigenic calcite. The results show that there are at least three types of authigenic calcite in the Lower Paleozoic carbonate reservoirs of the Bohai Sea. Calcite cemented in the syn-depositional-to-early-diagenetic stage displays very weak cathodoluminescence, with δ¹³C and δ¹⁸O and paleo-salinity distributions similar to those of micritic calcite. These features suggest that the calcite was formed during burial heating by sedimentary fluids. Calcite filling fractures shows heterogeneous cathodoluminescence intensity, ranging from weak to strong, indicating multiple stages of cementation. The broad elemental variation and multiple cementation events suggest that the diagenetic fluid sources were diverse. Isotopic data show that samples with carbon isotope values greater than −2.9‰ likely formed through water–rock interaction with fluids retained within the strata, whereas samples exhibiting more negative δ¹³C were formed from a mixed-source supply of strata and mantle-derived fluids. Calcite that fills karst collapse pores exhibits alternating bright and dark cathodoluminescence, strong negative δ¹⁸O shifts, and variability in trace elements such as Mn, Fe, and Co. These characteristics indicate a mixed origin of diagenetic fluids derived from both meteoric freshwater and carbonate-dissolving fluids. Full article

The complex interaction of hydrothermal fluids and carbonate rocks is recognized to promote significant impacts on petroleum systems, reservoir porosity, and potential. The objective of this study is to investigate the fluid phases entrapped in the mineral phases of the Barra Velha Formation (Santos Basin), including their petrographic paragenetic relationships, relative timing, temperatures of migration events, and maximum temperature reached by the sedimentary section. The petrographic descriptions (387), Rock-Eval pyrolysis (107), fluid inclusion petrography (14), and microthermometry (428) were performed on core and sidewall samples from two wells from one field of the Santos Basin. Hydrocarbon source intervals were primarily identified in lithologies with high argillaceous content. Chert samples still retain some organic remnants indicative of their original composition prior to extensive silicification. Redeposited intraclastic rocks exhibit the lowest organic content and oil potential. A hydrothermal petroleum system is identified by fluids consisting in gas condensate, light to heavy undersaturated oil, occasionally accompanied by aqueous fluids influenced by juvenile and evaporitic sources, and localized flash vaporization events. These hydrothermal fluids promoted silicification and dolomitization, intense brecciation, and lead to enhanced porosity in different compartments of the reservoir. The relative ordering of paleo-hydrothermal oils and the main oil migration and accumulation events has improved our understanding of the petroleum systems in the basin. This contribution is significant for future regional research on the evolution of fluid systems and their implications for carbonate reservoirs. Full article

The Chinese Altay is located in the western segment of the Central Asian Orogenic Belt (CAOB) and preserves critical records of the Paleo-Asian Ocean (PAO) Plate evolution during the Paleozoic era. This region also hosts significant mineral deposits, making it a focal point for geological research. In this paper, field investigation, petrology, mineralogy, and petrography studies were conducted on volcanic rocks in the Fuyun–Qinghe area, southern margin of the Chinese Altay, and the paper provided new zircon LA-ICP-MS dating data, Lu-Hf isotope data, and whole-rock geochemical data of the basaltic to andesitic volcanic rocks. Thus, the formation age, petrogenesis, and tectonic setting of these rocks were discussed, which was of great significance to reveal the nature of the PAO Plate. The findings showed that the basaltic andesitic volcanic breccia was formed at 382.9 ± 3.4 Ma, the basalt was 401.7 ± 4.7 Ma, and the andesites were 405.1 ± 5.6 Ma and 404.8 ± 6.7 Ma, which indicated that the above rocks were formed in the Early–Middle Devonian. The volcanic rock assemblages were hawaiite, mugearite, potassic trachybasalt, basaltic andesite, andesite, benmoreite, etc., which contained labeled magmatic rocks such as adakite, sub-boninite, niobium-enriched arc basalt (NEAB), picrite, high-magnesium andesite (HMA), and magnesium andesite (MA). Comprehensive analysis indicated that magma probably mainly originated from three sources: (1) partial melting of the PAO slab, (2) partial melting of the overlying garnet–spinel lherzolite mantle peridotite metasomatized by subducting-related fluids (melts), and (3) a possible input of the asthenosphere. Comparative analysis with modern analogs (e.g., Chile Triple Junction) indicates that ridge subduction of the PAO had existed in the Fuyun–Qinghe area during the Early–Middle Devonian. Based on available evidence, we tentatively named the oceanic plates in this region the central Fuyun–Qinghe Ridge and the Junggar Ocean Plates, separated by the ridge on both sides. Although the ocean had a certain scale, it had entered the climax period of transition from ocean to continent. Full article

This study examines the origin, tectonic setting, and Cu–Pb–Zn polymetallic mineralization of the Yangjiayu Complex, situated on the southwestern margin of the Jiaolai Basin. We present detailed geochemical, zircon U–Pb geochronological, and Hf isotopic data for rhyolite porphyry and monzodiorite samples. Zircon U–Pb dating reveals that the emplacement of both intrusions occurred in the Early Cretaceous. While the monzodiorite (122.5 ± 0.7 Ma) is numerically slightly older than the rhyolite porphyry (121.2 ± 0.6 Ma), considering the error ranges, their ages are essentially similar. The rhyolite porphyry displays higher SiO₂ and Na₂O + K₂O contents and a lower Al₂O₃ content relative to the monzodiorite. Geochemically, both intrusions are classified as high-K calc-alkaline and peraluminous, characterized by enrichment in large-ion lithophile elements (LILEs; e.g., Ba, Rb, Pb) and light rare earth elements (LREEs), along with depletion in high-field-strength elements (HFSEs; e.g., Nb, P, Ta) and heavy rare earth elements (HREEs). The rhyolite porphyry further exhibits middle rare earth elements (MREEs; e.g., Eu, Gd, Tb, Dy) depletion. Similar zircon εHf(t) values (monzodiorite: −23.0 to −26.1; rhyolite porphyry: −23.2 to −25.0) suggest a shared source derived from partial melting of the thickened lower crustal rocks. In comparison to the monzodiorite, the rhyolite porphyry shows lower total REE contents, a more pronounced negative Eu anomaly and stronger MREE depletion, higher Rb, Th, and U concentrations, and more significant P depletion, features indicative of more extensive assimilation-fractional crystallization (AFC). These geochemical and geochronological data indicate that the Yangjiayu Complex originated within an extensional tectonic setting associated with the Early Cretaceous subduction of the Paleo-Pacific Plate underneath the Eurasian Plate. Cu–Pb–Zn mineralization, primarily localized within the monzodiorite, is interpreted to be generated by magmatic-hydrothermal fluids. Therefore, ~120 Ma dioritic intrusions within the Jiaolai Basin constitute prospective targets for (Cu)–Pb–Zn polymetallic exploration. Full article

The tectonic evolution of Hainan Island during the Late Permian–Early Triassic period is still unclear. This study identified two types of basalts on the island and presented detailed geochronology, whole-rock geochemistry, and Hf isotope data of the Late Permian–Early Triassic basalts. U-Pb dating results indicated that baddeleyites and zircons of one sample from Group 1 basalts had formation ages of 256 ± 3 Ma and 255 ± 3 Ma, respectively, and two samples from Group 2 gave formation ages of 241 ± 2 Ma and 240 ± 3 Ma, respectively. Both groups are characterized by negative anomalies of Nb, Ta, and Ti, and enrichment in Ba, Th, U, and K. Group 1 belongs to sub-alkaline basalt and exhibited SiO₂ contents ranging from 50.50% to 51.05%, with ΣREE concentration of 136–148 ppm. Hf isotope analysis showed that the ε_Hf(t) values of baddeleyites and zircons were −10.56 to −4.70 and −14.94 to −6.95, respectively. Group 2 belongs to alkaline basalt and had a higher SiO₂ content of 52.48%–55.49% and ΣREE concentration of 168–298 ppm. They showed more depleted Hf isotopic composition with ε_Hf(t) values ranging from −2.82 to +4.74. These data indicate that the source area of Group 1 was an enriched mantle, likely derived from partial melting of spinel lherzolite mantle, and was modified by subduction-derived fluids. Group 2 was derived from depleted mantle, most likely originating from partial melting of garnet + spinel lherzolite mantle. They were contaminated by crustal materials and metasomatized by subduction-derived fluids with a certain degree of fractional crystallization. Comprehensive analysis suggests that Group 1 samples likely formed in an island arc tectonic setting, while Group 2 formed in a continental intraplate extensional (or initial rift) tectonic setting. Their formation was mainly controlled by the Paleo-Tethys tectonic domain. Group 1 basalts implied that subduction of the Paleo-Tethys oceanic crust lasted at least in the late Permian (ca. 255 Ma). Group 2 basalts revealed that the intra-plate extensional (or initial rift) stage occurred in the middle Triassic (ca. 240 Ma). Full article

The Yidun island arc was formed in response to the Late Triassic westward subduction of the Ganzi–Litang oceanic plate, a branch of the Paleo-Tethys Ocean. The Zhongdian arc, located in the south of the Yidun island arc, has relatively large number of porphyry (skarn) type Cu–Mo ± Au polymetallic deposits, the largest of which is the Pulang Cu (–Mo–Au) deposit with proven Cu reserves of 5.11 Mt, Au reserves of 113 t, and 0.17 Mt of molybdenum. However, the relationship between mineralization and the potassic alteration zone, phyllic zone, and propylitic zone of the Pulang porphyry deposit is still controversial and needs further study. Titanite (CaTiSiO₅) is a common accessory mineral in acidic, intermediate, and alkaline igneous rocks. It is widely developed in various types of metamorphic rocks, hydrothermally altered rocks, and a few sedimentary rocks. It is a dominant Mo-bearing phase in igneous rocks and contains abundant rare earth elements and high-field-strength elements. As an effective geochronometer, thermobarometer, oxybarometer, and metallogenic potential indicator mineral, titanite is ideal to reveal the magmatic–hydrothermal evolution and the mechanism of metal enrichment and precipitation. In this paper, major and trace element contents of the titanite grains from different alteration zones were obtained using electron probe microanalysis (EPMA) and laser-ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) to define the changes in physicochemical conditions and the behavior of these elements during the process of hydrothermal alteration at Pulang. Titanite in the potassic alteration zone is usually shaped like an envelope. It occurs discretely or is enclosed by feldspar, with lower contents of CaO, Al, Sr, Zr and Hf; a low Nb/Ta ratio; high ∑REE + Y, U, Th, Ta, Nb, and Ga content; and high FeO/Al₂O₃ and LREE/HREE ratios. This is consistent with the characteristics of magmatic titanite from fresh quartz monzonite porphyry in Pulang and other porphyry Cu deposits. Titanite in the potassium silicate alteration zone has more negative Eu anomaly and a higher U content and Th/U ratio, indicating that the oxygen fugacity decreased during the transformation to phyllic alteration and propylitic alteration in Pulang. High oxygen fugacity is favorable for the enrichment of copper, gold, and other metallogenic elements. Therefore, the enrichment of copper is more closely related to the potassium silicate alteration. The molybdenum content of titanite in the potassium silicate alteration zone is 10²–10⁴ times that of the phyllic alteration zone and propylitic alteration zone, while the copper content is indistinctive, indicating that molybdenum was dissolved into the fluid or deposited in the form of sulfide before the medium- to low-temperature hydrothermal alteration, which may lead to the further separation and deposition of copper and molybdenum. Full article

The Xiangluwanzi gold deposit, located in the southern Jilin Province of Northeast China, is hosted within the Jurassic Guosong Formation, and surrounded by Archean granitoids. The ore bodies are governed by near-EW and NE-trending faults. Four alteration/mineralization stages have been distinguished: I, pyrite–sericite–quartz; II, gold–pyrite–quartz; III, sphalerite–quartz–carbonate; and IV, quartz–carbonate. Four types of fluid inclusions (FIs) were identified: pure CO₂, CO₂-rich, CO₂-bearing, and NaCl–H₂O fluid inclusions. Stage-I quartz veins contain all FIs, whereas stage II quartz veins host CO₂-rich, CO₂-bearing, and NaCl-H₂O FIs. Only NaCl–H₂O FIs were present in stages-III and -IV quartz veins. The homogenization temperatures of the FIs range, respectively, from 233 to 279, 185–242, 171–217, and 148–170 °C in stages I–IV, having salinities of 2.62–8.54, 2.81–7.58, 4.32–6.58, and 3.37–5.25 wt% NaCl equivalents, respectively. The H (−93.5‰ to −75.9‰) and O (^δ18O_H2O = −5.8‰ to 4.6‰) isotopic compositions suggest magmatic water was gradually diluted by meteoric water. Carbon isotopic values (22.8‰ to −17.8‰) suggest the incorporation of organic carbon from surrounding strata via water–rock interactions. Fluid boiling, fluid mixing, and water–rock interactions are the primary mechanisms driving mineral precipitation. Full article