Search Results (35)

In this study, we developed a palladium-catalyzed decarbonylative nucleophilic halogenation reaction using inexpensive and readily available acid anhydrides as substrates. This approach effectively circumvents the instability of acyl chlorides and the low reactivity of acyl fluorides. The Pd/Xantphos catalyst system exhibited excellent compatibility with the thermodynamically and kinetically challenging reductive elimination of C–X bonds (X = I, Br, and Cl) from Pd(II) intermediates. Notably, for electron-donating substrates, adopting an open system significantly improved the reaction efficiency. The positive effect of the open system may be due to the reversible nature of CO insertion and deinsertion, which helps direct the reaction toward the desired pathway by allowing the generated CO to exit the reaction system. Mechanistic studies suggest that the reaction proceeds through a highly reactive acyl halide intermediate, followed by a unimolecular fragment coupling (UFC) pathway via decarbonylation or an alternative pathway involving the formation of an activated anionic palladate complex in the presence of lithium halide. Full article

In this work, a Pd(II)-C,N-cyclometalated complex was grafted to polysiloxanes via azide–alkyne cycloaddition. The obtained polymer–metal complex (Pd-PDMS) acts as a catalyst in the Suzuki–Miyaura reaction. Pd-PDMS was drop-casted onto a carbon fiber support, and the resulting membrane demonstrated catalytic activity in the cross-coupling reaction without yield loss after several catalytic cycles. The catalytic membrane allows for easy catalyst recycling and provides ultra-low palladium levels in Suzuki–Miyaura reaction products. Full article

The present study explores the potential of four NHC-palladium(II) complexes derived from (Z)- or (E)-styryl-N-alkylbenzimidazolium salts, namely trans-dichloro-[(Z)-1-styryl- 3-benzyl-benzimidazol-2-yliden]pyridine palladium(II) (6), trans-dichloro-[(E)-1-styryl-3-benzyl- benzimidazol-2-yliden]pyridine palladium(II) (7), trans-dichloro-[(Z)-1-styryl-3-(3-fluorobenzyl)- benzimidazol-2-yliden]pyridine palladium(II) (8) and trans-dichloro-[(E)-1-styryl-3- (3-fluorobenzyl)-benzimidazol-2-yliden]pyridine palladium(II) (9), to be use as pre-catalysts for the cross-coupling reactions between furanyl or thiofuranyl derivatives and arylbromides via the C–H activation of the heterocycles. The structures of the four Pd(II) complexes have been elucidated through the use of multinuclear NMR, FT-IR and mass spectroscopy. Furthermore, the cis or trans conformation of the styryl substituents and the geometry of two different compounds was substantiated by single-crystal X-ray diffraction, which was carried out on organometallic species 6, 8 and 9. After the optimization of catalytic conditions, which was carried out with 1 mol% of pre-catalyst with KOAc as a base in dimethylacetamide at 120 °C for 3 h, complex 6 proved to be the most effective pre-catalyst agent, with full or quasi full conversions being observed in the cross-coupling of 4-bromoacetophenone with 2-butylfuran, 1-(2-furanyl)-ethanone, furfuryl acetate, furfural, 1-(2-thienyl)-ethanone, thenaldehyde and 2-methylthiophene. Full article

The modified suspension polymerization technique has been used for the preparation of composite microparticles from the mixture of glycidyl methacrylate (GMA), styrene (S), and divinylbenzene (DVB) in the presence of hydrophobized Fe₃O₄ nanoparticles. The obtained polymer microspheres were characterized using different instrumental and physicochemical techniques, modified with a zero-order PAMAM dendrimer, and impregnated with palladium(II) acetate solutions to immobilize palladium(II) ions. The resulting materials were preliminarily examined as catalysts in the Suzuki reaction between 4-bromotoluene and phenylboronic acid. It was found that the addition of magnetite particles to the composition of monomers provided polymer microparticles with embedded magnetic nanoparticles. The composite microparticles obtained showed a complex, multi-hollow, or raspberry-like morphology. After their modification, they could serve as recyclable catalysts for reactions that include both 4-bromotoluene and several other aryl bromides. Full article

Stable palladium (II) complexes, incorporating a double (N-benzoylthiourea) arrangement bonded to a complex heterocyclic scaffold, are used as precursors of catalytic species able to promote Suzuki–Miyaura, Mizoroki–Heck, Hiyama, Buchwald–Hartwig, Hirao and Sonogashira–Hagihara cross-coupling transformations in water. These sustainable processes are chemoselective and very versatile. The nanoparticles responsible for these catalytic reactions were analyzed and studied. Their usefulness is demonstrated after several tests and analyses. The heterogeneous character of this species in water was also confirmed. Full article

Polysaccharide/silica hybrid microcapsules were prepared using ionic gelation followed by spray-drying. Chitosan and alginate were used as biopolymer matrices, and in situ prepared silica was used as a structuring additive. The prepared microparticles were used in two very different applications: the encapsulation of hydrophilic molecules, and as a support for palladium nanoparticles used as catalysts for a model organic reaction, namely the reduction of p-nitrophenol by sodium borhydride. In the first application, erioglaucine disodium salt, taken as a model hydrophilic substance, was encapsulated in situ during the preparation of the microparticles. The results indicate that the presence of silica nanostructures, integrated within the polymer matrix, affect the morphology and the stability of the particles, retarding the release of the encapsulated substance. In the second application, chloropalladate was complexed on the surface of chitosan microparticles, and palladium(II) was subsequently reduced to palladium(0) to obtain heterogeneous catalysts with an excellent performance. Full article

Biaryl monophosphines are important precursors to active catalysts of palladium-mediated cross-coupling reactions. The efficiency of the phosphine-based transition metal complex catalyst has its origin in the electronic structure of the complex used and the sterical hindrance created by the ligand at an active catalyst site. The aim of this paper is to shed some light on the multiverse of coordination modes of biaryl monophosphine ligands. Here, we present the analysis of the X-ray single crystal structures of palladium(II) complexes of a family of biaryl monophosphine ligands and the first crystallographic report on a related phosphine sulfide. Despite the common biaryl monophosphine ligand motif, they show diverse coordination modes (i) starting from the activation of aromatic C atoms and producing a C,P metallacycle, through (ii) the O,P chelation to Pd(II) ions with a simultaneous demethylation reaction of one of the methoxy groups, ending up with (iii) the monodentate coordination to metal cations via P atoms or (iv) via S atoms in the case of phosphine sulfide. We relate our results to the crystal structures found in the Cambridge Structural Database to show the multiverse of coordination modes in the group of biaryl monophosphine ligands. Full article

This paper describes the use of immobilized palladium catalysts on Fe₃O₄ magnetic nanoparticles (MNPs) to afford magnetically separable catalysts in the methoxycarbonylation of 1-hexene. Immobilization of homogeneous complex [Pd(L1)Cl₂] (Pd1), where L1 = N,N′E,N,N′E)-N,N′-(3-(3-(triethoxysilyl)propyl)pentane-2,4-diylidene)dianiline, on Fe₃O₄ MNPs at 100 °C and Pd loading of 10% (based on wt% of Pd1) afforded the corresponding complex [Pd1@Fe₃O₄] (Pd2) in good yields. The use of calcination temperatures of 150 °C and 200 °C produced compounds Pd3 and Pd4, respectively, while Pd metal loadings (based on wt% of Pd1) of 5% and 15% provided complexes Pd5 and Pd6, respectively. The immobilized compounds were analyzed using FT-IR spectroscopy, SEM-EDX, TEM, ICP-OES, and PXRD techniques. The surface areas and porosity of the materials were determined using nitrogen physisorption measurements and confirmed the formation of mesoporous materials, while SQUID measurements established Ms values in the range of 60.69 to 69.93 emu/g. The immobilized Pd(II) complexes catalyzed the methoxycarbonylation of 1-hexene, yielding mainly linear esters. The immobilized compounds could be recycled up to five times via magnetic separation without significant loss in catalytic activities. Full article

The Pd(II) complexes [Pd(Cp)(L)_n]_m[BF₄]_m were synthesized via the reaction of cationic acetylacetonate complexes with cyclopentadiene in the presence of BF₃∙OEt₂ (n = 2, m = 1: L = PPh₃ (1), P(p-Tol)₃, tris(ortho-methoxyphenyl)phosphine (TOMPP), tri-2-furylphosphine, tri-2-thienylphosphine; n = 1, m = 1: L = dppf, dppp (2), dppb (3), 1,5-bis(diphenylphosphino)pentane; n = 1, m = 2 or 3: 1,6-bis(diphenylphosphino)hexane). Complexes 1–3 were characterized using X-ray diffractometry. The inspection of the crystal structures of the complexes enabled the recognition of (Cp^–)⋯(Ph-group) and (Cp^–)⋯(CH₂-group) interactions, which are of C–H…π nature. The presence of these interactions was confirmed theoretically via DFT calculations using QTAIM analysis. The intermolecular interactions in the X-ray structures are non-covalent in origin with an estimated energy of 0.3–1.6 kcal/mol. The cationic palladium catalyst precursors with monophosphines were found to be active catalysts for the telomerization of 1,3-butadiene with methanol (TON up to 2.4∙10⁴ mol 1,3-butadiene per mol Pd with chemoselectivity of 82%). Complex [Pd(Cp)(TOMPP)₂]BF₄ was found to be an efficient catalyst for the polymerization of phenylacetylene (PA) (catalyst activities up to 8.9 × 10³ g_PA·(mol_Pd·h)⁻¹ were observed) Full article

The C-3 functionalization of 1H-indazole could produce a lot of highly valuable pharmaceutical precursors, which could be used for the treatment of cancer and many other inflammatory diseases. This work was focused on the C-3 functionalization of 1H-indazole through Suzuki–Miyaura cross-coupling of 3-iodo-1H-indazole with organoboronic acids, catalyzed by various palladium catalysts immobilized over imidazolium ionic liquids, as well as catalyst recycling. A series of reaction parameters, including the substrate, catalyst, and ionic liquid, were fully investigated. It is significant to note that the yields of the present Suzuki–Miyaura cross-coupling were mainly determined by the catalyst and the solvent used, more than the chemical structure of the substrate. Furthermore, ferrocene-based divalent palladium complexes showed better catalytic outputs compared to simple palladium salts. Moreover, using two imidazolium ionic liquids, BMImX (BMIm⁺ = 1-n-butyl-3-methylimidazolium, X⁻ = BF₄⁻, PF₆⁻) not only improved the yields of cross-coupled products, but also avoided the formation of Pd⁽⁰⁾ black, as compared to the non-ionic liquid facilitated reactions, and simultaneously making catalyst recycling more effective. On average, BMImBF₄ performed better than BMImPF₆. Additionally, scientific calculations revealed that 1,1′-bis(diphenylphosphino)ferrocene-palladium(II)dichloride dichloromethane complex (PdCl₂(dppf)) showed a lower energy barrier in the formation of intermediates than [1,1′-bis(di-tert-butylphosphino)ferrocene]dichloropalladium(II) (PdCl₂(dtbpf)), leading to higher catalytic outputs. This work may contribute to the development of 1H-indazole-derived new pharmaceuticals. Full article

Treatment of the imines a–c with palladium(II) acetate in acetic acid yielded the μ-acetate dinuclear complexes 1a–c, which readily reacted with sodium chloride or bromide to provide μ-halide analogues. The reaction of the latter with nitrogen, phosphorus and oxygen donor nucleophiles yielded new imine palladacycles following the cleavage of the Pd₂X₂ unit. The complexes were fully characterized by microanalysis, ¹H, ¹³C and ³¹P NMR spectroscopies, as appropriate. The compounds were applied as catalysts in the Suzuki–Miyaura coupling reaction in aqueous and semi-aqueous media. Full article

Metal-catalyzed cascade processes based on hydrofunctionalization of alkynes are receiving much more attention because of their potential to provide advantageous approaches to otherwise synthetically challenging compounds. An alternative catalyst system has been found for the domino cycloisomerization/cyclocondensation reaction involving acetylenic acids and heterodinucleophiles. A CNN pincer palladium(II) complex, acting as a homogeneous catalyst, provides the corresponding polyheterocycles with a higher substrate/catalyst ratio. Other palladium sources were also tested and discarded, and a number of mechanistic studies including poisoning assays, kinetic plots, TEM images, XRD spectra and UPLC-MS analysis of reaction intermediates were conducted in order to shed light on the role of this pincer catalyst and the catalytic cycle involved in the cascade reaction. As a result, a more nuanced mechanism is tentatively proposed. Full article

A heterogeneous Janus-type palladium interphase catalyst was obtained by selective surface modification of a hollow mesoporous silica material. The catalyst comprises hydrophobic octyl groups on one side of the silica nanosheets and single-site bis-imidazoline dichlorido palladium(II) complexes on the other. The structure of this composite material has been analyzed by means of elemental analysis, atomic absorption spectroscopy, BET surface analysis, TGA, SEM and solid-state CP-MAS ¹³C and ²⁹Si NMR spectroscopy. The catalyst showed extraordinary activity for the aqueous-phase oxidation of styrene to acetophenone using 30% hydrogen peroxide as the oxidant. An 88% yield of acetophenone could be achieved after 60 min. Full article

Oxygen Reduction Reaction (ORR) is the bottle-neck strategic reaction ruling the fuel cell efficiency process. The slow kinetics of the reaction require highly effective electrocatalysts for proper boosting. In this field, composite catalysts formed by carbon nanotubes functionalized with palladium(II) complexes showed surprising catalytic activity comparable to those of a commercial Pt electrode, but the catalytic mechanisms of these materials still remain open to discussion. In this paper, we propose the combination of experimental and theoretical results to unfold the elementary reaction steps underlying the ORR catalysis. Full article

Carbon-carbon cross-coupling reactions are essential synthetic tools for synthesizing polymers, natural products, agrochemicals, and pharmaceuticals. Therefore, new catalysts that function with greater efficiency and functional group tolerance are being researched. We have prepared new ferrocenylimine monodentate N and P donor ligands and N^N and N^P bidentate chelating ligands (L1 to L4) employed in stabilizing palladium ions for application in Mizoroki-Heck and Suzuki-Miyaura cross-coupling reactions. The ferrocenylimine ligands were successfully synthesized by Schiff base condensation reactions of acetyl ferrocene with hydrazine monohydrate to afford ferrocenyl hydrazone (L1). Ligand L1 was further treated with aldehydes to give ferrocenyl(2-diphenylphosphino)imine (L3) and ferrocenyl(pyridyl)imine (L3), while phosphination of L1 with chlorodiphenylphosphine afforded L2. The ligands were used to prepare new palladium(II) complexes (C1 to C4) by complexation with [PdCl₂(MeCN)₂]. All the ligands and complexes were fully characterized using standard spectroscopic and analytical techniques, including ¹H NMR and ¹³C NMR spectroscopy, FT-IR spectroscopy, mass spectrometry and elemental analysis. The complexes (C1 to C4) were tested for efficacies in catalyzing Mizoroki-Heck and Suzuki-Miyaura C-C cross-coupling reactions and proved to be suitable catalyst precursors. Ferrocenyl(2-diphenylphosphine)imino and ferrocenyl-methyl hydrazone palladium(II) complexes C2 and C3 showed the best activities at TONs of up to 201. The ferrocenyl palladium(II) (pre)catalysts demonstrated moderate activity in Mizoroki-Heck reactions involving substrates with substituents on the olefin and aryl halide (including 4-Cl, 4-CH₃, -CO₂Me and -CO₂Et). Density Functional Theory was used to study the mechanism of the Mizoroki-Heck cross-coupling reactions and have led to confirmation of the widely accepted catalytic cycle. Catalyst precursors (C1 to C4) also displayed good activity and selectivity in Suzuki-Miyaura cross-coupling reactions, at 0.5 mol% catalyst loading, with good tolerance to functional groups present on the aryl halide and boronic acid substrates (such as 4-Cl, 4-CHO, 4-COOH, 3-NO₂, 3,5-dimethoxy and 4-CH₃). Full article