Search Results (55)

The discharge of pesticide residues (PRs) from agricultural activities into water bodies has raised concerns about their toxicity to humans and the ecosystem. Traditional methods such as adsorption, membrane filtration, biological treatment, and conventional filtration usually result in incomplete removal of PRs. Currently, removal of PRs using advanced oxidation processes, particularly metal oxide-based photocatalysts, is considered a promising way. This review provides a comprehensive overview of recent advances in the photocatalytic degradation of PRs using TiO₂-based photocatalysts (T-BPs), the most widely investigated metal-oxide photocatalyst systems. First, we discuss the distribution, types, and negative impacts of major PRs on humans and the ecosystem. Next, we explore modification methods to enhance the properties of T-BPs, including light absorption behavior, charge separation rate, and photocatalytic degradation performance toward PRs. Afterward, this review carefully examines current challenges, such as complex water matrices, T-BP stability, energy supply for photocatalysis, and toxicity reduction. Finally, we highlight key future research directions, like the development of visible light-driven photocatalysts, enhanced mineralization efficiency, reduced secondary environmental risks, and the design of highly reliable catalyst and reactor systems for sustainable large-scale applications. Full article

Traditional nano-titanium dioxide films have strong photocatalytic performance; however, their hydrophilic surfaces make it easier for pollutants or by-products resulting from the reaction processes to deposit on the membrane surface and occupy their active sites, which reduces the coating degradation efficiency and shortens their service life. In the current study, nano-TiO₂ was mixed with SiO₂ for hydrophobic film coating by the sol–gel method. The surface morphology of the membrane was observed by scanning electron microscopy (SEM), the composition of the coating was analyzed by X-ray diffraction (XRD), and its stable hydrophobicity was verified by contact angle testing (θ_w = 117°). The specific surface area Brunauer–Emmett–Teller (BET) revealed between 0.0561 (for 3 layers) and 0.0868 m²/g after 9 layers of coating. Through establishing a simplified photocatalytic reactor under UV, the new coating’s abilities in the degradation of methylene blue, its anti-fouling, and durability were examined. Results revealed that when the common TiO₂ films were combined with hydrophobic films, nearly 100% of methylene blue was degraded, and the degradation capacity remained stable after three rounds of tests. Moreover, it was observed that only a small amount of methylene blue adhered to the new film surface comparatively. Outcomes confirmed that the SiO₂-mixed TiO₂ thin films exhibited enhanced hydrophobicity. When integrated with ordinary TiO₂ coatings, the composite structure demonstrated superior photocatalytic efficiency and stability in the degradation of aqueous pollutants compared to pure TiO₂ coatings. Full article

Photocatalytic reduction of CO₂ into value-added chemicals offers a sustainable route to mitigate greenhouse gas emissions while producing renewable fuels. However, conventional TiO₂-based systems suffer from limited visible-light activity and inefficient reactor configurations. Here, we developed electrospun polyacrylonitrile (PAN) membranes embedded with TiO₂-Cu₂O heterojunction nanoparticles and integrated them into a custom crossflow photocatalytic membrane reactor. The reactor employed bifacial illumination using a solar simulator (front) and a xenon/mercury lamp (back), each calibrated to 1 Sun (100 mW·cm⁻²). Membrane morphology was characterized by SEM, and chemical composition was confirmed by XPS. Photocatalytic performance was evaluated in CO₂-saturated 0.5 M potassium bicarbonate solution under continuous flow. The PAN/ TiO₂-Cu₂O membrane exhibited a methanol production rate of approximately 300 μmol·g⁻¹·h⁻¹ under dual-light illumination, outperforming single illumination, PAN-TiO₂, and PAN controls. Enhanced activity is attributed to extended visible-light absorption, improved charge separation at the TiO₂-Cu₂O heterojunction, and optimized photon flux through bifacial illumination. The electrospun architecture provided high surface area and porosity, facilitating CO₂ adsorption and catalyst dispersion. Combining heterojunction engineering with bifacial reactor design significantly improves solar-driven CO₂ conversion. This approach offers a scalable pathway for integrating photocatalysis and membrane technology into sustainable fuel synthesis. Full article

Photocatalytic membrane reactors (PMRs) are an innovative technology for water treatment, effectively combining membrane filtration and photocatalysis to enhance contaminant removal while enabling the regeneration of fouled membranes. In this study, a new porous film of chitosan that was impregnated with TiO₂ was developed and coated onto a ceramic support by spin coating to form a new porous immobilized PMR. The formed membrane was tested for two reasons: the removal of methylene blue dye by a dead-end filtration process and to demonstrate its ability to self-regenerate under UV exposure. The selective layer of the membrane was characterized using FTIR spectroscopy, X-ray diffraction, scanning electron microscopy (SEM), and water permeability tests. The results confirmed the formation of an amorphous film with no chemical interaction between chitosan and TiO₂. The membrane exhibited an average water permeability of 10.72 L/m²·h·bar, classifying it as either ultrafiltration (UF) or nanofiltration (NF). Dead-end filtration of methylene blue (10 mg L⁻¹) achieved 99% dye removal based on UV–vis analysis of the permeate, while flux declined rapidly due to fouling. Subsequent UV irradiation removed the deposited dye layer and restored approximately 50% of the initial flux, indicating partial self-regeneration. Overall, spin-coated chitosan–TiO₂ layers on ceramic supports provide high dye removal and photocatalytically assisted flux recovery, and further work should quantify photocatalytic degradation during regeneration. Full article

Photocatalytic membrane reactors (PMRs), which combine photocatalysis with membrane separation, represent a pivotal technology for sustainable water treatment and resource recovery. Although extensive research has documented various configurations of photocatalytic-membrane hybrid processes and their potential in water treatment applications, a comprehensive analysis of the interrelationships among reactor architectures, intrinsic physicochemical mechanisms, and overall process efficiency remains inadequately explored. This knowledge gap hinders the rational design of highly efficient and stable reactor systems—a shortcoming that this review seeks to remedy. Here, we critically examine the connections between reactor configurations, design principles, and cutting-edge applications to outline future research directions. We analyze the evolution of reactor architectures, relevant reaction kinetics, and key operational parameters that inform rational design, linking these fundamentals to recent advances in solar-driven hydrogen production, CO₂ conversion, and industrial scaling. Our analysis reveals a significant disconnect between the mechanistic understanding of reactor operation and the system-level performance required for innovative applications. This gap between theory and practice is particularly evident in efforts to translate laboratory success into robust and economically feasible industrial-scale operations. We believe that PMRs will realize their transformative potential in sustainable energy and environmental applications in future. Full article

Conventional wastewater treatment plants (WWTPs) have limited efficiency in removing emerging pollutants (EPs), meaning these pollutants persist and lead to widespread ecological contamination. In this study, real effluents from a WWTP were characterized using TOC and Py-GC/MS, which indicated the presence of various organic compounds that could be indicative of micro-nanoplastics (MNPs) or plastics additives. To address this challenge, we propose the use of a photocatalytic membrane reactor (PMR) as an advanced treatment system capable of achieving high degradation efficiency under mild operating conditions. Preliminary experimental tests were conducted using various commercial photocatalysts (TiO₂, WO₃, Nb₂O₅), four UV lamps, and oxidants (air, O₂) using added Gemfibrozil (GEM) as a drug model compound. Real effluent samples collected from WWTP were tested with and without pretreatment to remove coarse particles prior to photocatalysis. Mineralization was achieved in both cases, but it occurred at a higher rate for the pretreated effluent. The mineralization of GEM and EPs in real effluent was achieved within five hours under UV irradiation using titanium dioxide (TiO₂) as a low-cost photocatalyst in a PMR. The results highlight the potential of photocatalytic systems, and particularly PMRs, as a promising technology for removing recalcitrant pollutants in real effluents offering a viable solution for improved environmental protection. Full article

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are persistent compounds characterized by stable C−F bonds giving them high thermal and chemical stability. Numerous studies have highlighted the presence of PFASs in the environment, surface waters and animals and humans. Exposure to these chemicals has been found to cause various health effects and has necessitated the need to develop methods to remove them from the environment. To date, the use of photocatalytic degradation and membrane separation to remove PFASs from water has been widely studied; however, these methods have drawbacks hindering them from being applied at full scale, including the recovery of the photocatalyst, uneven light distribution and membrane fouling. Therefore, to overcome some of these challenges, there has been research involving the coupling of photocatalysis and membrane separation to form photocatalytic membrane reactors which facilitate in the recovery of the photocatalyst, ensuring even light distribution and mitigating fouling. This review not only highlights recent advancements in the removal of PFASs using photocatalysis and membrane separation but also provides comprehensive information on the integration of photocatalysis and membrane separation to form photocatalytic membrane reactors. It emphasizes the performance of immobilized and slurry systems in PFAS removal while also addressing the associated challenges and offering recommendations for improvement. Factors influencing the performance of these methods will be comprehensively discussed, as well as the nanomaterials used for each technology. Additionally, knowledge gaps regarding the removal of PFASs using integrated photocatalytic membrane systems will be addressed, along with a comprehensive discussion on how these technologies can be applied in real-world applications. Full article

The management of drinking water treatment plant (DWTP) sludge is challenging for water treatment facilities. Previous studies reported mainly on handling sludge through landfilling, release into water bodies, discharge into wastewater treatment plants, onsite disposal, and incineration methods for the treatment of sludge. The limitations of these sludge-handling methods are well documented. This article focuses on the hierarchical approach as an alternative and comprehensive method for handling DWTP sludge. The core of hierarchical management streamlines the minimization of the generated DWTP sludge; treatment of DWTP sludge to reduce toxicity; changing of the physicochemical form of DWTP sludge; and finally, the reuse, recycling, and recovery of DWTP sludge. The premise is to achieve zero landfilling of DWTP sludge, establish a circular economy, generate job opportunities, and preserve the environment. Thus, this study also proposes two main technologies, which are gravity-based sludge separators for fractionating the sludge and photocatalytic membrane reactors (PMRs) as a technology for the treating and/or recovery of nutrients and minerals from DWTP sludge. Until the chemical deductive or minus approach becomes a reality in water treatment, the use of PMRs and gravity-based sludge separators will enhance the management of DWTP sludge when incorporated into the hierarchical approach. Full article

The increasing demand for efficient wastewater treatment technologies, driven by global population growth and industrialisation, highlights the necessity for advanced, reliable solutions. This study investigated the efficacy of a slurry photocatalytic membrane reactor (PMR) for the advanced removal of organic pollutants, quantified via chemical oxygen demand (COD), under natural and simulated solar light irradiation. Employing two variants of iron-doped titania as photocatalysts and a polysulfone-based polymeric membrane for the separation process, the investigation showcased COD removal efficiencies ranging from 66–85% under simulated solar light to 52–81% under natural sunlight over a 7 h irradiation period. The overall PMR system demonstrated COD removal efficiencies of 84–95%. The results confirmed the enhanced photocatalytic activity afforded by iron doping and establish solar-powered slurry PMRs as an effective, low-energy, and environmentally friendly alternative for the advanced treatment of municipal wastewater, with the research providing valuable insights into sustainable water management practices. Full article

An integrated photocatalytic membrane system (IPMS) was developed for potential use in the remediation of naproxen using real water samples from a drinking water treatment plant. Key parameters such as time, pH, water matrix, mixing speeds, flow rate, and light intensity undeniably affected photocatalytic and membrane separation processes. The system optimization was based on improving irradiation to generate a more reactive species and mass transfer to increase the reaction rate. Upon optimization, IPMS achieved 99% naproxen removal efficiency. Computational fluid dynamics (CFD) simulated the flow patterns and radiation distribution inside the photocatalytic membrane reactor to improve irradiation and mass transfer during operation. The simulated flow field revealed the presence of dead zones with different velocities in the photocatalytic membrane reactor; this limited the mass transfer of reactive species in the reactor, resulting in uneven distribution of reactive radicals. The dead zones were mitigated by increasing the mixing speed, and as a result, convective mass flow improved process performance. The governing parameters (flow patterns and radiation distribution) of the simulated and experimental data were in agreement. The absorption of irradiation by the active site of the membranes improved with light intensity; at higher light intensities, the light irradiated deeper into the membrane. As such, the CoFe₂O₄ nanoparticles incorporated inside the membrane pores became highly activated, thus enhancing degradation. The obtained space–time yield (STY) (1.23 × 10¹¹ mol/cm².s) and photocatalytic space–time yield (PSTY) (4.39 × 10¹¹ mol/W.s) showed that the developed IPMS was efficient regarding energy intensiveness and throughput for treatment of pollutants in water. Full article

Photocatalytic membrane reactors (PMRs) have been found to be very effective in the removal of organic pollutants (particularly recalcitrant compounds) from wastewater because they allow for the mineralization of organic pollutants to innocuous by-products, thus achieving high-quality treated water. Owing to the very high volumes of water involved, treated sewage wastewater could be reused if a very efficient tertiary stage, like a PMR, can be foreseen. In this review, the two main PMR configurations (photocatalytic membranes and slurry PMRs) were analyzed as requirements of a tertiary treatment of sewage wastewater considering six design and operational parameters of such plants: (i) continuous wastewater flow rate from the secondary stage; (ii) the self-control of the photodegradation rate related to wastewater chemical–physical parameters; (iii) ability to handle variations of wastewater concentration and flow rate; (iv) the control of the quality of treated wastewater; (v) low plant footprint; and (vi) easy maintenance. In this analysis, some characteristics of photocatalysis (which involves three phases: solid (the photocatalyst), liquid (the wastewater), and gas (oxygen or air)) and those of membranes (they can be produced using different materials and configurations, different processes (pressure-driven or not pressure-driven), etc.) were considered. The obtained results show that slurry PMRs seem more suitable than photocatalytic membranes for such applications. We believe this review can trigger a shift in research from the laboratory to industry in using photocatalytic membrane reactors. Full article

Photocatalytically active silicon carbide (SiC)-based mesoporous layers (pore sizes between 5 and 30 nm) were synthesized from preceramic polymers (polymer-derived ceramic route) on the surface and inside the pores of conventional macroporous α-alumina supports. The hybrid membrane system obtained, coupling the separation and photocatalytical properties of SiC thin films, was characterized by different static and dynamic techniques, including gas and liquid permeation measurements. The photocatalytic activity was evaluated by considering the degradation efficiency of a model organic pollutant (methylene blue, MB) under UV light irradiation in both diffusion and permeation modes using SiC-coated macroporous supports. Specific degradation rates of 1.58 × 10⁻⁸ mol s⁻¹ m⁻² and 7.5 × 10⁻⁹ mol s⁻¹ m⁻² were obtained in diffusion and permeation modes, respectively. The performance of the new SiC/α-Al₂O₃ materials compares favorably to conventional TiO₂-based photocatalytic membranes, taking advantage of the attractive physicochemical properties of SiC. The developed synthesis strategy yielded original photocatalytic SiC/α-Al₂O₃ composites with the possibility to couple the ultrafiltration SiC membrane top-layer with the SiC-functionalized (photocatalytic) macroporous support. Such SiC-based materials and their rational associations on porous supports offer promising potential for the development of efficient photocatalytic membrane reactors and contactors for the continuous treatment of polluted waters. Full article

The disinfection properties of photocatalysis on liquid digestate derived from biogas plants have been investigated for the first time. The study presents the physiological characteristics of liquid digestate retrieved from various biogas plants based in northern Greece, revealing the heterogeneity of this matrix. Preliminary photocatalysis experiments conducted on inoculated liquid digestate samples showed that disinfection was possible when a pre-treated digestate underwent a combination of centrifuge–flocculation–μfiltration after 5.5 h with 0.7 g/L suspended TiO₂ under UVA illumination. To explore the feasibility of an industrial application based on this concept, a novel design photocatalytic nanofiltration reactor was implemented for disinfection experiments on pre-treated liquid digestate. The synergistic action of photocatalysis during nanofiltration alleviated the leakage phenomena, and both the retentate and permeate effluents had lower concentrations of pathogens by approximately 1–2 log₁₀ cfu/mL. This work sets out the basis for the efficient operation and engineering application of collaborative technology, with photocatalysis as the final step for liquid digestate sanitation and reusable water recovery. Full article

Environmental pollution has become a worldwide issue. Rapid industrial and agricultural practices have increased organic contaminants in water supplies. Hence, many strategies have been developed to address this concern. In order to supply clean water for various applications, high-performance treatment technology is required to effectively remove organic and inorganic contaminants. Utilizing photocatalytic membrane reactors (PMRs) has shown promise as a viable alternative process in the water and wastewater industry due to its efficiency, low cost, simplicity, and low environmental impact. PMRs are commonly categorized into two main categories: those with the photocatalyst suspended in solution and those with the photocatalyst immobilized in/on a membrane. Herein, the working and fouling mechanisms in PMRs membranes are investigated; the interplay of fouling and photocatalytic activity and the development of fouling prevention strategies are elucidated; and the significance of photocatalysis in membrane fouling mechanisms such as pore plugging and cake layering is thoroughly explored. Full article